Internet is working but router is not

Hi... I just changed yesterday from Road Runner Cable internet to a local company that services my community called "EnTouch Systems." The internet works fine when I plug directly from the wall to the computer (modem that does the phone and internet is mounted in master closet now and runs through the walls and out outlets) but when I attempt to set up my Linksys WRTP54G (Linksys+Vonage from when we had Vonage) it does not work. When I run the setup CD it came with it gets all of the way to the end then I get a pop up saying there is no internet and to unplug my modem for 60 seconds which I then do but it accomplishes nothing. Can anyone help? *****NOTES***** I have read all of the suggestions on the forum like change the local IP and clone the mac address... i have reset both the modem and the router, tried new ethernets... nothing works. please help!

Well try upgrading the firmware of the router & keep on holding tightly
the reset button in such a way that power light is blinking on the
router & then do a complete network power cycle i.e., unplug the power
cables from the modem & from the router & then plug in the power cable
to the modem first once all the lights are solid green you could plug
in the power cable to the router & check out it will definately work!!
Configuration for cable connection:-
Access the setup page of the router by launching an
Browser and type on the address bar, 192.168.1.1 and press enter. When
it prompts for the username and password, leave the username field
empty and provide password as "admin" (Without quotes)
click on ok.
On the main setup page the ""Internet Connection Type"" should be
on ""Obtain IP Automatically - DHCP ?. Click on the Save Settings
button.
Now click on the sub tab ""MAC address clone"".
- Click on enable
Click Clone & click save settings
Check WAN Ip on Status page of router ....
If getting Valid Ip .... try going online
If not ... power cycle for 4-5 minutes & then agian check the WAN Ip address .....

Similar Messages

Internet is working but browsers will not load.

About a week ago my web browsers stopped working. I'm running Vista and I use FireFox. I also have Internet Explorer but neither of them will load any web page when i go to them. I know my connection is working because I can use any other program that requires internet. I've been told that I have a virus. I've ran Malwarebytes, RKill, Avast!, CCleaner, Advanced System Care, and I've tried a system restore but nothing has helped. Anyone have any idea whats wrong or how I can fix this?

I have the same problem as the poster for this thread. A couple days ago my web browsers stopped working. I was watching a live stream on TwitchTv (I watched through my Firefox browser) and Firefox had been pestering me with notifications to upgrade to version 27.0.1. After I concluded watching on Twitch I finally gave in and upgraded FireFox. It prompted me that the change would be in effect after a restart I shutdown my computer (and turned back on) instead of restarting it. When I tried to use Firefox, it wouldn't let me and said the quote below. Both Firefox and IE say the same thing: Unable to connect:-The site could be temporarily unavailable or too busy, try again in a few moments.-If you are unable to load any pages, please check your computer's network connection.-If your computer is or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the web. I'm running Vista and I use FireFox. I also have Internet Explorer and Google Chrome but neither of them will load any web page when i go to them. I know my connection is working because I can use any other program that requires internet. I tried system restore, but for some reason the computer said it failed. I've checked all the connections and cables, rebooted my router and modem, ran Malwarebytes and AVG 2012 with updated content and I've tried a system restore but nothing has helped. I also followed your steps: Command Prompt and select 'Run as Administrator'. Enter the command listed below seperately and hit return after each one. ipconfig /flushdnsnbtstat -Rnbtstat -RRnetsh int reset resetlog.txt
netsh int ip resetnetsh winsock reset(But netsh int reset resetlog.txt and netsh int ip reset did not work) Anyone have any idea whats wrong or how I can fix this?

HT1725 I am not able to resume the download. My internet connectionis working but itunes is not resuming the download

I am not able to finish a download

Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/

My iPad cannot connect to my internet. the internet is working but not with my ipad.

my iPad cannot connect to my internet. the internet is working but not with my ipad.

Call your ISP (Internet Service Provider) and explain them your issue, it could range from having your router configured incorrectly to having a wiring issue. Personally, I have Comcast and they are great, no issues, and awesome customer service.
Hope you get up and running ASAP

Internet Download Manager cannot integration with firefox4 itis Look in the menus it works but it does not actually work ?

internet Download Manager cannot integration with firefox4 its Look in the menus it works but it does not actually work

IDM may need to be updated to work with Firefox 4.0. You could contact them and make them aware of the problems you are having with their program.

HT3964 Hi , My modem got zapped by lightning yesterday. My iMac still was able to power on when I tried it yesterday. Today the modem is replaced and internet is working, but now the computer will not power on. I followed the steps to reset SMC. Noth

Hi , My modem got zapped by lightning yesterday. My iMac still was able to power on when I tried it yesterday. Today the modem is replaced and internet is working, but now the computer will not power on. I followed the steps to reset SMC. Nothing. ??

Ouch, not much more you can do, I think you'll have to have it looked at.

Wired works but wireless does not

I am posting this for two of my friends. Both of them have the same problem. They both brought their laptops to my house and connected wireless to my belkin router automatically. No problem. They both went home to their houses (two different friends both with linksys in their houses) and could not connect to their own linksys routers. They tried to repair connection but router did not show up as available. They both also have desktop computers that are wired and connect to the Internet without any problem. They both also wired their pc's to the router and connected without any problem. When they tried to connect wireless, they could not. We tried turning off the modem and router and pc and reboot the modem, router and pc again. Still only works when wired, but not wireless. By the way, they tried connecting wireless in the same room next to their router so there should not be any interference or something blocking the signal. Also they both have a Toshiba laptop with a built-in wireless.
Any suggestions?
Adam
Message Edited by starace on 05-19-200711:38 AM
(Mod note: Removed non-public information. Thank you.)Message Edited by Vince_02 on 05-19-2007 08:58 AM

Hi, have your friends check the status of their adapter. And if it is working fine, ask them if they have trief already setting up the wireless settings of the router?
Take the risk. Conquer your limitations!

I have reset my macbook pro to factory reset the screen is now asking me to put in my details, do i have too as if i am showing it to someone they need to be able to see it working but does that not mean that my name will be on it. please help

i have reset my macbook pro to factory reset the screen is now asking me to put in my details, do i have too as if i am showing it to someone they need to be able to see it working but does that not mean that my name will be on it. please help

Use a alias, but you might have to use a zip code that matches the location used.
Also if you click the right button there is a way to bypass the registration, like register later or something, Apple has it hidden. Also to bypass the internet connection to send the registration off.
Never place your name on a Mac or PC, it's spread throughout the entire machine, in emails, on the network in plain sight etc.

In a cafe, all internet connecti9ns work, but the email client is saying Timed Out, can't access the server. Rebooted. Problem persists.

All other internet connections work - but the Mozilla email client can't access the mail... Works in every other café. But not here. Thanks!

I'd suggest you check with the cafe owner which ports are allowed there.
If in doubt simply use webmail, which will most likely work.

Macbook pro to HDTV, video is working but audio is not working, how to make audio work as well

Macbook pro to HDTV, video is working but audio is not working, how to make audio work as well

If you use an HDMI cable, the audiostream will be integrated, so there will be sound when using an HDMI cable!
Not necessarily. That only works as stated if you have one of the most recent MBP's that has a built-in HDMI port.
If the MBP only has a Thunderbolt or miniDisplayPort, you need an appropriate adapter cable and even if you use an HDMI adapter or cable to connect to your HDTV there is no guarantee it will carry audio. You have to determine if your specific MBP model supports audio out through its miniDisplayPort or Thunderbolt output, and whether the adapter does likewise.

My mac's launchpad is working but i am not able to use the apps that are provided in the launchpad

my mac's launchpad is working but i am not able to use the apps that are provided in the launchpad

Well, everything that you have bought with her Apple ID prior to getting your own Apple ID is forever hers. Apple will not transfer content from one ID to another. But in the case of the Mac, contact iTunes Customer Service and request that they send your issue to the Account Security Team and ask that the Mac be released form your mother's account so you may register it with your account. Then you can accept the iLife apps into your account for any future updates.
iTunes Support -
http://www.apple.com/support/itunes/

My home button is not working but apple will not honor the limited warranty

My home button on my ipod touch is not working but Apple will not honor the limited warranty because the corner glass is craked. I have been using it cracked for months. What is my legal recourse. I think it is unfair!!!!!!

tracy252 wrote:
My home button on my ipod touch is not working but Apple will not honor the limited warranty because the corner glass is craked. I have been using it cracked for months. What is my legal recourse. I think it is unfair!!!!!!
Hire a lawyer.

My iphone 4s is working but I can not see the screen.

my iphone 4s is working but I can not see the screen. What is going on?

Possibly backlight died, if you look at it closely in bright light can you see a "Shadow" of the screen image?
First, back up your phone
http://support.apple.com/kb/HT1766
Then, restore the OS from scratch
http://support.apple.com/kb/HT1414
If that doesn't work, you'll need to have the phone serviced
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne

I bought a new IPHONE from apple reseller and the earpiece is not working . There is no sound .Speaker and headfone are working but earpiece is not working . How can i get it replaced.

I bought a new IPHONE from apple reseller and the earpiece is not working.
There is no sound .Speaker and headfone are working but earpiece is not working.
How can i get it replaced.

You can get service information on this web page.
Regards.

Im having a problem with my mic on my ipod 5th gen it works but it douse not pick up any sound unless i talk right next to the mic. how can i fix this

im having a problem with my mic on my ipod 5th gen it works but it douse not pick up any sound unless I talk right next to the mic but it sounds low . how can i fix this

- Make sure the mic hole is clear and unobstructed. It is the little hole on the back by the camera lens(if has back camera). For the 16 GB one without the back camera the mic hole is on the top edge near the center.
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Internet is working but router is not

Similar Messages

Maybe you are looking for