Internet Mail from SAP Workflow

Hi All,
Can anybody tell me how to send external/Internal mails using SAP Workflow. If we have to send mails to SAP Inbox then this can be achieved using the step "Send Mail" in Workflow, but for Internet mail what should be the procedure.
Please let me know ASAP because its very urgent for me.
Thanks a lot to all of you.
Sachin

hi,
Welcome to SDN forum
Check this thread..
send mail to internet adress
Reward with points for answers
Cheers
Alfred

Similar Messages

  • No mail is sent from SAP Workflow

    Hi
    We are sending mail from SAP Workflow to Lotus notes email. We have made the correct configuration in su01d for users whom we are sending by mentioning email address and communication method as email. We have also checked that program RSCONN01 is running periodically. We checked the SCOT transaction and no entries has been registered from SAP Workflow. we have defined SMTP node as required but still nothing happens.
    I have also tried to send mail from SBWP but no entries is registered. Can you tell me what is the problem. I think it might be the issue between linkage between SAP and mail server. Can anyone tell me what needs to be checked here. I have done config for SICF Tcode also.
    Thanks
    Arghadip

    > I have also tried to send mail from SBWP but no entries is registered.
    Are you still not able to send mail from SBWP? You need to fix this problem first, then you can start worrying about the workflow mail-sending capability.The user which sends e-mail needs to have an e-mail address defined in the user record.
    Try defining an e-mail address for your own user and send an e-mail from SBWP. This should show up in SCOT, either as waiting in the queue, or (if you have bad luck with your timing) as sent e-mail. If the e-mail doesn't even show up in SCOT, ask Basis to help you figure out what is wrong.

  • Problem while sending mail from SAP

    Hi ABAP gurus,
        I tried to send mail from SAP. For this we configured SMTP Services using the transaction SCOT and all are Completed.
      When I send a mail using SAPOffice it is Executing successfully and main is delivered to me.
       When I tried in  the program using the function module 'SO_NEW_DOCUMENT_SEND_API1' mail is not delivered to me but it is placed in SAPoffice outbox.The status of the mail says  "SEND PROCESS STILL RUNNING". Even when i execute SAPconnect manually mail is not transmitted.
       This is the transaction history of the mail.
      Trans. history  
    18.02.2006  13:44:31  Document sent 
                 13:44:31  Wait for communications service 
    After This stage Delivery attempt is not taking place.
    This is the Code
    ****Document DATA
    EMAIL_DATA-OBJ_NAME = 'MESSAGE'.
    EMAIL_DATA-OBJ_DESCR = SUBJECT.
    EMAIL_DATA-OBJ_LANGU = 'E'.
    EMAIL_DATA-SENSITIVTY = 'P'.
    EMAIL_DATA-OBJ_PRIO =  '1'.
    EMAIL_DATA-NO_CHANGE = 'X'.
    EMAIL_DATA-PRIORITY = '1'.
    ***Receiver
        EMAIL_SEND-RECEIVER = '[email protected]'.
        EMAIL_SEND-REC_TYPE = 'U'.
        EMAIL_SEND-EXPRESS = 'X'.
        APPEND EMAIL_SEND.
    CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
         EXPORTING
              DOCUMENT_DATA              = EMAIL_DATA
              DOCUMENT_TYPE              = 'RAW'
              PUT_IN_OUTBOX              = 'X'
        IMPORTING
             SENT_TO_ALL                = SENT
             NEW_OBJECT_ID              = EMAIL_ID
         TABLES
              OBJECT_CONTENT             = EMAIL_TEXT
              RECEIVERS                  = EMAIL_SEND
         EXCEPTIONS
              TOO_MANY_RECEIVERS         = 1
              DOCUMENT_NOT_SENT          = 2
              DOCUMENT_TYPE_NOT_EXIST    = 3
              OPERATION_NO_AUTHORIZATION = 4
              PARAMETER_ERROR            = 5
              X_ERROR                    = 6
              ENQUEUE_ERROR              = 7
              OTHERS                     = 8.
    Please Help me to solve this Problem.
    Regards,
    Viswanath Babu.P.D

    Hi viswanath,
    1. in scot, in smtp node,
    2. press the internet button
    3. In ADDRESS AREA,
       type
       *yahoo.com
       *rediffmail.com
      etc,etc.
    4. Only when such domains are  entered,
       will sap send mail.
    5. It will not send any mail to other domains.
    6. Or simply enter *
    regards,
    amit m.

  • Send mail from SAP system to another SAP system

    Hello Xperts
    I need to send a mail from one SAP box (ECC) to another SAP box (SRM,CRM, EP etc). I know how to send mail from SAP to external address but unable to find the parameters in this case. Kindly help.
    thkx
    Prabhu
    PS: Kindly DONOT post on "How to send mail from SAP" as my questions is all abt how to send mail from one sap system to another sap system

    Hi
    To send mail Internally check this sample code it works fine this code was developed by me
    *& Report  ZMATURITYREPORT                                             *
    *&   Title - Maturity   report                                         *
    *&           ABAP/4 Consultant                                         *
    *& Name- Pavan Praveen Valluri Created on 26/07/2007                   *
    *& Module - FI                                                         *
    REPORT  ZMATURITYREPORT.
    tables: bseg.
    * SELECTION SCREEN---------------------------------------------------  *
    parameters: p_email type somlreci1-receiver default
    '@gujaratpetro.com'.
    * Data: p_email(25) type c value '[email protected]'.
    * END OF SELECTION SCREEN -------------------------------------------  *
    *----------DATA DECLARATION--------------------------------------------*
    data: it_message type standard table of solisti1 initial size 0
    with header line.
    data: it_message1 type standard table of solisti1 initial size 0
    with header line.
    data: it_message2(10) type N.
    data: it_message3 type standard table of solisti1 initial size 0
    with header line.
    data: it_message4 type standard table of solisti1 initial size 0
    with header line.
    data: it_attach type standard table of solisti1 initial size 0
    with header line.
    data: text(150).
    data: t_packing_list like sopcklsti1 occurs 0 with header line,
          t_contents like solisti1 occurs 0 with header line,
          t_receivers like somlreci1 occurs 0 with header line,
          t_attachment like solisti1 occurs 0 with header line,
          t_object_header like solisti1 occurs 0 with header line,
          w_cnt type i,
          w_sent_all(1) type c,
          w_doc_data like sodocchgi1,
          gd_error type sy-subrc,
          gd_reciever type sy-subrc.
    start-of-selection.
    data: lv_date type sy-datum.
    data: lv_date1 type sy-datum.
    data: lv_formatdate(10) type c.
    data: lv_formatdate1(10) type c.
    data: var1(4) type c,
    var2(2) type c,
    var3(2) type c.
    data: begin of int_bseg occurs 0,
        BELNR LIKE BSEG-BELNR,
        ZUONR LIKE BSEG-ZUONR,
        GJAHR LIKE BSEG-GJAHR,
        DMBTR LIKE BSEG-DMBTR,
        HKONT LIKE BSEG-HKONT,
    end of int_bseg.
    data: begin of int_SKAT occurs 0,
        TXT50 LIKE SKAT-TXT50,
        SAKNR LIKE SKAT-SAKNR,
        KTOPL LIKE SKAT-KTOPL,
    end of int_SKAT.
    data: begin of int_bkpf occurs 0,
          BELNR LIKE BKPF-BELNR,
          BUKRS LIKE BKPF-BUKRS,
          GJAHR LIKE BKPF-GJAHR,
          BUDAT  LIKE BKPF-BUDAT,
    end of int_BKPF.
    data: 2days_out type sy-datum.
    2days_out = sy-datum + 2.
    data: var4(4) type c,
    var5(2) type c,
    var6(2) type c.
    *-------- END OF DATA DECLARATION--------------------------------------*
    *--- CONCATENATING AND ARRANGING DATE ---------------------------------*
    lv_date = 2days_out.
    var1 = lv_date+(4).
    var2 = lv_date+4(2).
    var3 = lv_date+6(2).
    concatenate var3 var2 var1 into lv_formatdate separated by '.'.
    *--- END OF CONCATENATING AND ARRANGING DATE  -------------------------*
    *-------------------------SELECTION FOR BSEG---------------------------*
    select zuonr belnr bukrs GJAHR DMBTR HKONT from bseg into
    corresponding fields of  table int_bseg
    where bukrs = 'company name' and
          ZUONR = lv_formatdate.
    *--------------END OF SSELECTION FOR BSEG---------------------------   *
    *-------------------------SELECTION FOR BKPF---------------------------*
    select  BUDAT BUKRS BELNR GJAHR  from BKPF into
    corresponding fields of table int_BKPF
    where bukrs = 'company name'.
    append int_BKPF.
    *------------------END OF SELECTION FOR BKPF---------------------------*
    *-------------------------SELECTION FOR SKAT---------------------------*
    select SAKNR TXT50 from SKAT into
    corresponding fields of  table int_SKAT
    where KTOPL = 'company name'.
    *and      SAKNR = INT_BSEG-HKONT.
    APPEND INT_SKAT.
    *--------------END OF SSELECTION FOR SKAT---------------------------   *
    *-----------------POPULATING EMAIL SUBJECT ----------------------------*
    perform populate_email_message_body.
      perform send_file_as_email_attachment
      tables it_message
      it_attach
      using p_email
      'Maturity after 2 days'
      'XLS'
      'filename'
      changing gd_error
      gd_reciever.
    * Instructs mail send program for SAPCONNECT to send email(rsconn01)
      perform initiate_mail_execute_program.
    *endif.
    end-of-selection.
    *------------END OF POPULATING EMAIL SUBJECT --------------------------*
    *& Form SEND_FILE_AS_EMAIL_ATTACHMENT
    * Send email
    form send_file_as_email_attachment tables pit_message
    pit_attach
    using p_email
    p_mtitle
    p_format
    p_filename
    p_attdescription
    p_sender_address
    p_sender_addres_type
    changing p_error
    p_reciever.
      data: ld_error type sy-subrc,
      ld_reciever type sy-subrc,
      ld_mtitle like sodocchgi1-obj_descr,
      ld_email like somlreci1-receiver,
      ld_format type so_obj_tp ,
      ld_attdescription type so_obj_nam ,
      ld_attfilename type so_obj_des ,
      ld_sender_address like soextreci1-receiver,
      ld_sender_address_type like soextreci1-adr_typ,
      ld_receiver like sy-subrc.
      ld_email = p_email.
      ld_mtitle = p_mtitle.
      ld_format = p_format.
      ld_attdescription = p_attdescription.
      ld_attfilename = p_filename.
      ld_sender_address = p_sender_address.
      ld_sender_address_type = p_sender_addres_type.
    * Fill the document data.
      w_doc_data-doc_size = 1.
    * Populate the subject/generic message attributes
      w_doc_data-obj_langu = sy-langu.
      w_doc_data-obj_name = 'SAPRPT'.
      w_doc_data-obj_descr = ld_mtitle .
      w_doc_data-sensitivty = 'F'.
    ** Fill the document data and get size of attachment
      clear w_doc_data.
      read table it_attach index w_cnt.
      w_doc_data-doc_size =
      ( w_cnt - 1 ) * 255 + strlen( it_attach ).
      w_doc_data-obj_langu = sy-langu.
      w_doc_data-obj_name = 'SAPRPT'.
      w_doc_data-obj_descr = ld_mtitle.
      w_doc_data-sensitivty = 'F'.
      clear t_attachment.
      refresh t_attachment.
      t_attachment[] = pit_attach[].
    * Describe the body of the message
      clear t_packing_list.
      refresh t_packing_list.
      t_packing_list-transf_bin = space.
      t_packing_list-head_start = 1.
      t_packing_list-head_num = 0.
      t_packing_list-body_start = 1.
      describe table it_message lines t_packing_list-body_num.
      t_packing_list-doc_type = 'RAW'.
      append t_packing_list.
    * Add the recipients email address
      clear t_receivers.
      refresh t_receivers.
      t_receivers-receiver = ld_email.
      t_receivers-rec_type = 'U'.
      t_receivers-com_type = 'INT'.
      t_receivers-notif_del = 'X'.
      t_receivers-notif_ndel = 'X'.
      append t_receivers.
      call function 'SO_DOCUMENT_SEND_API1'
        EXPORTING
          document_data              = w_doc_data
          put_in_outbox              = 'X'
          sender_address             = ld_sender_address
          sender_address_type        = ld_sender_address_type
          commit_work                = 'X'
        IMPORTING
          sent_to_all                = w_sent_all
        TABLES
          object_header              = t_object_header
          packing_list               = t_packing_list
          contents_bin               = t_attachment
          contents_txt               = it_message
          receivers                  = t_receivers
        EXCEPTIONS
          too_many_receivers         = 1
          document_not_sent          = 2
          document_type_not_exist    = 3
          operation_no_authorization = 4
          parameter_error            = 5
          x_error                    = 6
          enqueue_error              = 7
          others                     = 8.
    * Populate zerror return code
      ld_error = sy-subrc.
    * Populate zreceiver return code
      loop at t_receivers.
        ld_receiver = t_receivers-retrn_code.
      endloop.
    endform.                    "send_file_as_email_attachment
    *& Form INITIATE_MAIL_EXECUTE_PROGRAM
    * Instructs mail send program for SAPCONNECT to send email.
    form initiate_mail_execute_program.
      wait up to 2 seconds.
      if gd_error eq 0.
        submit rsconn01 with mode = 'INT'
                      with output = 'X'
                      and return.
      endif.
    endform.                    " INITIATE_MAIL_EXECUTE_PROGRAM
    *& Form POPULATE_EMAIL_MESSAGE_BODY
    * Populate message body text
    form populate_email_message_body.
      refresh it_message.
      refresh it_message1.
      refresh it_message3.
       refresh it_message4.
    *--------------- LOOP FOR BSEG -----------------------------------------
      loop at int_BSEG.
    read table int_bKPF WITH KEY BELNR = INT_BSEG-BELNR
            GJAHR = INT_BSEG-GJAHR.
    read table int_SKAT WITH KEY SAKNR = INT_BSEG-HKONT.
    *---CHANGING DATE FORMAT FOR BKPF---------------------------------------
    lv_date1 = int_bkpf-budat.
      var4 = lv_date1+(4).
      var5 = lv_date1+4(2).
      var6 = lv_date1+6(2).
    concatenate var6 var5 var4 into lv_formatdate1 separated by '.'.
    *---END OF CHANGING DATE FORMAT FOR BKPF-------------------------
    it_message =  int_bseg-belnr.
    it_message1 =  lv_formatdate1.
    it_message2 = int_bseg-dmbtr.
    it_message3 = int_bseg-hkont.
    IT_MESSAGE4 = INT_SKAT-TXT50.
    SHIFT IT_MESSAGE2 LEFT DELETING LEADING '0'.
    *-------------POPULATING EMAIL BODY WITH DATA -------------------------
    concatenate 'Maturity After 2Days' 'for'  'G/L account-' it_message3
    '--' IT_MESSAGE4  ',' 'Amount-' it_message2
        into it_message separated by space.
    append it_message.
    append it_message1.
    append it_message3.
      clear it_message.
      clear it_message1.
      clear it_message2.
      clear it_message3.
    endloop.
    *------------END OF LOOP FOR BSEG --------------------------------------
    endform. " POPULATE_EMAIL_MESSAGE_BODY
    <b><i>
    To send an mail with external attachment check this one
    </b></i>
    <i>first create a Include report with the following coding</i>
    *& Include ZPA1_INCLFOR_MAIL *
    * Data
    DATA: docdata LIKE sodocchgi1,
    objpack LIKE sopcklsti1 OCCURS 1 WITH HEADER LINE,
    objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE,
    objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE,
    objbin LIKE solisti1 OCCURS 10 WITH HEADER LINE,
    objhex LIKE solix OCCURS 10 WITH HEADER LINE,
    reclist LIKE somlreci1 OCCURS 1 WITH HEADER LINE.
    DATA: tab_lines TYPE i,
    doc_size TYPE i,
    att_type LIKE soodk-objtp.
    DATA: listobject LIKE abaplist OCCURS 1 WITH HEADER LINE.
    * FORM
    FORM ml_customize USING objname objdesc.
    *----------- Clear Variables
    CLEAR docdata.
    REFRESH objpack.
    CLEAR objpack.
    REFRESH objhead.
    REFRESH objtxt.
    CLEAR objtxt.
    REFRESH objbin.
    CLEAR objbin.
    REFRESH objhex.
    CLEAR objhex.
    REFRESH reclist.
    CLEAR reclist.
    REFRESH listobject.
    CLEAR listobject.
    CLEAR tab_lines.
    CLEAR doc_size.
    CLEAR att_type.
    *--------- Set Variables
    docdata-obj_name = objname.
    docdata-obj_descr = objdesc.
    ENDFORM. "ml_customize
    * FORM
    FORM ml_addrecp USING preceiver prec_type.
    CLEAR reclist.
    reclist-receiver = preceiver.
    reclist-rec_type = prec_type.
    APPEND reclist.
    ENDFORM. "ml_customize
    * FORM
    FORM ml_addtxt USING ptxt.
    CLEAR objtxt.
    objtxt = ptxt.
    APPEND objtxt.
    ENDFORM. "ml_customize
    * FORM
    FORM ml_prepare USING bypassmemory whatatt_type whatname.
    IF bypassmemory = ''.
    *--------- Fetch List From Memory
    CALL FUNCTION 'LIST_FROM_MEMORY'
    TABLES
    listobject = listobject
    EXCEPTIONS
    OTHERS = 1.
    IF sy-subrc <> 0.
    MESSAGE ID '61' TYPE 'E' NUMBER '731'
    WITH 'LIST_FROM_MEMORY'.
    ENDIF.
    CALL FUNCTION 'TABLE_COMPRESS'
    * IMPORTING
    * COMPRESSED_SIZE =
    TABLES
    in = listobject
    out = objbin
    EXCEPTIONS
    OTHERS = 1
    IF sy-subrc <> 0.
    MESSAGE ID '61' TYPE 'E' NUMBER '731'
    WITH 'TABLE_COMPRESS'.
    ENDIF.
    ENDIF.
    * Header Data
    * Already Done Thru FM
    * Main Text
    * Already Done Thru FM
    * Packing Info For Text Data
    DESCRIBE TABLE objtxt LINES tab_lines.
    READ TABLE objtxt INDEX tab_lines.
    docdata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ).
    CLEAR objpack-transf_bin.
    objpack-head_start = 1.
    objpack-head_num = 0.
    objpack-body_start = 1.
    objpack-body_num = tab_lines.
    objpack-doc_type = 'TXT'.
    APPEND objpack.
    * Packing Info Attachment
    att_type = whatatt_type..
    DESCRIBE TABLE objbin LINES tab_lines.
    READ TABLE objbin INDEX tab_lines.
    objpack-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objbin ).
    objpack-transf_bin = 'X'.
    objpack-head_start = 1.
    objpack-head_num = 0.
    objpack-body_start = 1.
    objpack-body_num = tab_lines.
    objpack-doc_type = att_type.
    objpack-obj_name = 'ATTACHMENT'.
    objpack-obj_descr = whatname.
    APPEND objpack.
    * Receiver List
    * Already done thru fm
    ENDFORM. "ml_prepare
    * FORM
    FORM ml_dosend.
    CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    EXPORTING
    document_data = docdata
    put_in_outbox = 'X'
    commit_work = 'X' "used from rel. 6.10
    * IMPORTING
    * SENT_TO_ALL =
    * NEW_OBJECT_ID =
    TABLES
    packing_list = objpack
    object_header = objhead
    contents_bin = objbin
    contents_txt = objtxt
    * CONTENTS_HEX = objhex
    * OBJECT_PARA =
    * object_parb =
    receivers = reclist
    EXCEPTIONS
    too_many_receivers = 1
    document_not_sent = 2
    document_type_not_exist = 3
    operation_no_authorization = 4
    parameter_error = 5
    x_error = 6
    enqueue_error = 7
    OTHERS = 8
    IF sy-subrc <> 0.
    MESSAGE ID 'SO' TYPE 'S' NUMBER '023'
    WITH docdata-obj_name.
    ENDIF.
    ENDFORM. "ml_customize
    * FORM
    FORM ml_spooltopdf USING whatspoolid.
    DATA : pdf LIKE tline OCCURS 0 WITH HEADER LINE.
    *-------------- Call Function
    CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'
    EXPORTING
    src_spoolid = whatspoolid
    TABLES
    pdf = pdf
    EXCEPTIONS
    err_no_otf_spooljob = 1
    OTHERS = 12.
    *------------- Convert
    PERFORM doconv TABLES pdf objbin.
    ENDFORM. "ml_spooltopdf
    * FORM
    FORM doconv TABLES
    mypdf STRUCTURE tline
    outbin STRUCTURE solisti1.
    *-------- Data
    DATA : pos TYPE i.
    DATA : len TYPE i.
    *------------ Loop And Put Data
    LOOP AT mypdf.
    pos = 255 - len.
    IF pos > 134. "length of pdf_table
    pos = 134.
    ENDIF.
    outbin+len = mypdf(pos).
    len = len + pos.
    IF len = 255. "length of out (contents_bin)
    APPEND outbin.
    CLEAR: outbin, len.
    IF pos < 134.
    outbin = mypdf+pos.
    len = 134 - pos.
    ENDIF.
    ENDIF.
    ENDLOOP.
    IF len > 0.
    APPEND outbin.
    ENDIF.
    ENDFORM. "doconv
    <b>
    Then include that report in the following report and copy the same code and paste it there
    </b>
    *& Report ZPA_TEMP147 *
    REPORT ZPA_TEMP147 .
    INCLUDE zpa1_inclfor_mail.
    * DATA
    DATA : itab LIKE tline OCCURS 0 WITH HEADER LINE.
    DATA : file_name TYPE string.
    data : path like PCFILE-PATH.
    data : extension(5) type c.
    data : name(100) type c.
    * SELECTION SCREEN
    PARAMETERS : receiver TYPE somlreci1-receiver lower case.
    PARAMETERS : p_file LIKE rlgrap-filename
    OBLIGATORY.
    * AT SELECTION SCREEN
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
    CLEAR p_file.
    CALL FUNCTION 'F4_FILENAME'
    IMPORTING
    file_name = p_file.
    * START-OF-SELECTION
    START-OF-SELECTION.
    PERFORM ml_customize USING 'Tst' 'Testing'.
    PERFORM ml_addrecp USING receiver 'U'.
    PERFORM upl.
    PERFORM doconv TABLES itab objbin.
    PERFORM ml_prepare USING 'X' extension name.
    PERFORM ml_dosend.
    SUBMIT rsconn01
    WITH mode EQ 'INT'
    AND RETURN.
    * FORM
    FORM upl.
    file_name = p_file.
    CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
    filename = file_name
    filetype = 'BIN'
    TABLES
    data_tab = itab
    EXCEPTIONS
    file_open_error = 1
    file_read_error = 2
    no_batch = 3
    gui_refuse_filetransfer = 4
    invalid_type = 5
    no_authority = 6
    unknown_error = 7
    bad_data_format = 8
    header_not_allowed = 9
    separator_not_allowed = 10
    header_too_long = 11
    unknown_dp_error = 12
    access_denied = 13
    dp_out_of_memory = 14
    disk_full = 15
    dp_timeout = 16
    OTHERS = 17.
    path = file_name.
    CALL FUNCTION 'PC_SPLIT_COMPLETE_FILENAME'
    EXPORTING
    complete_filename = path
    * CHECK_DOS_FORMAT =
    IMPORTING
    * DRIVE =
    EXTENSION = extension
    NAME = name
    * NAME_WITH_EXT =
    * PATH =
    EXCEPTIONS
    INVALID_DRIVE = 1
    INVALID_EXTENSION = 2
    INVALID_NAME = 3
    INVALID_PATH = 4
    OTHERS = 5
    ENDFORM. "upl
    <b>These are the FM for sending external email :-</b>
    SO_DOCUMENT_SEND_API1
    SAPoffice: Send new document with attachments via RFC
    SO_NEW_DOCUMENT_ATT_SEND_API1
    (In 4.6C only, You can go to SE37 and click the documentation on how to use it. A sample program is provided there.)
    SAPoffice: Send new document with attachments via RFC
    Note : If you are using FM SO_NEW_DOCUMENT_ATT_SEND_API1 then Export Parameter DOCUMENT_DATA-OBJ_DESCR contains the Subject.
    SO_NEW_DOCUMENT_SEND_API1
    SAPoffice: Send new document
    <b>Check this sample report</b>
    DATA : BEGIN OF ITAB OCCURS 0,
    PERNR LIKE PA0001-PERNR,
    ENAME LIKE PA0001-ENAME,
    END OF ITAB.
    DATA: message_content LIKE soli OCCURS 10 WITH HEADER LINE,
    receiver_list LIKE soos1 OCCURS 5 WITH HEADER LINE,
    packing_list LIKE soxpl OCCURS 2 WITH HEADER LINE,
    listobject LIKE abaplist OCCURS 10,
    compressed_attachment LIKE soli OCCURS 100 WITH HEADER LINE,
    w_object_hd_change LIKE sood1,
    compressed_size LIKE sy-index.
    START-OF-SELECTION.
    SELECT PERNR ENAME
    INTO CORRESPONDING FIELDS OF TABLE ITAB
    FROM PA0001
    WHERE PERNR < 50.
    LOOP AT ITAB.
    WRITE :/02 SY-VLINE , ITAB-PERNR, 15 SY-VLINE , ITAB-ENAME, 50
    SY-VLINE.
    ENDLOOP.
    * Receivers
    receiver_list-recextnam = '[email protected]'. "-->
    * EMAIL ADDRESS
    RECEIVER_list-RECESC = 'E'. "<-
    RECEIVER_list-SNDART = 'INT'."<-
    RECEIVER_list-SNDPRI = '1'."<-
    APPEND receiver_list.
    * General data
    w_object_hd_change-objla = sy-langu.
    w_object_hd_change-objnam = 'Object name'.
    w_object_hd_change-objsns = 'P'.
    * Mail subject
    w_object_hd_change-objdes = 'Message subject'.
    * Mail body
    APPEND 'Message content' TO message_content.
    * Attachment
    CALL FUNCTION 'SAVE_LIST'
    EXPORTING
    list_index = '0'
    TABLES
    listobject = listobject.
    CALL FUNCTION 'TABLE_COMPRESS'
    IMPORTING
    compressed_size = compressed_size
    TABLES
    in = listobject
    out = compressed_attachment.
    DESCRIBE TABLE compressed_attachment.
    CLEAR packing_list.
    packing_list-transf_bin = 'X'.
    packing_list-head_start = 0.
    packing_list-head_num = 0.
    packing_list-body_start = 1.
    packing_list-body_num = sy-tfill.
    packing_list-objtp = 'ALI'.
    packing_list-objnam = 'Object name'.
    packing_list-objdes = 'Attachment description'.
    packing_list-objlen = compressed_size.
    APPEND packing_list.
    CALL FUNCTION 'SO_OBJECT_SEND'
    EXPORTING
    object_hd_change = w_object_hd_change
    object_type = 'RAW'
    owner = sy-uname
    TABLES
    objcont = message_content
    receivers = receiver_list
    packing_list = packing_list
    att_cont = compressed_attachment.
    <b>Settings for sending mail</b>
    Configuring SAP 4.6x Internet mail Gateway
    SAP can be configured to send and receive emails from different sources.This section explains how to integrate SAPOffice with an external emailsystem. Your Internet email must be configured and running prior to this.Email from SAP is forwarded to the users external email system..
    You can configure inbound and outbound forwarding. Outbound flow forwardsa SAP message (eg: update termination) via UNIX sendmail to the intended recepient. Inbound accepts a message from sendmail and places it in the users SAPOffice inbox. Many companies prefer to configure outbound only.
    Configuring outbound forwarding
    SAP configuration
    1. Create your RFC destination for outbound email using transaction SM59
    RFC Destination : SAP_INTERNET_GATEWAY
    Connection Type : T
    Description : SAP internet mail gateway
    Click on 'Explicit Host' if you wanton demand gateway dameon invocation.
    Program : /sapmnt/SID/exe/mlunxsnd
    Target Host : Enter hostname that runs your central instance.
    Click 'Test Connection' and you should seea successfull message.
    2. Shared Office Settings transaction SO16-> Send -> Settings or
    directly via transaction SCOT- SAPconnect Administation
    Nodes - Create
    Node : IMAIL
    Description : SAP internet mail gateway
    RFC Destination : SAP_INTERNET_GATEWAY
    Tick : Internet
    Address Area : *
    Tick : All formats
    Dev. type : Choose an approciate Printer Device
    Set further addresstype : N
    Maximum waiting timefor repeat send attempt procedure : Blank or decide for yourself
    Tick : Node is ready for use
    Setting
    - DefaultDomain : <your company domain>.com
    - Conversionrule : require if your communication device only support one format.
    e.g. if you email system only support the format RAW (ASCII text format)
    Format To Format Ranking Function module
    ALI RAW 1 SX_OBJECT_CONVERT_ALI_RAW (convert APAP List)
    Referto note 171698 - SAPconnect: Formats, conversion, device type
    UNIX configuration
    1 .. cd /sapmnt/SID/exe
    2 ..csh
    ..mlsomadm mailgw.ini
    System Name [C11] :
    Client [000] :
    Username : MAILADM
    Password : MAILADM
    Language : E
    Load Balancing :
    Hostname : <hostname>
    System number : <instance_number>
    Gateway hostname: <central_instance_hostname>
    Gateway Service : <instance number>
    Use SAP Router :
    Trace level :
    Sendmail Command [/usr/lib/sendmail -i -f<SENDER_ADDRESS>]:
    Codepage [ISO-8859-1] :
    Trace Level (Outbound) [0] :
    Update file sapmailsid.cfg? [Y]
    Testing whether your configuration is successful
    1. Logon to SAP
    2. Execute transaction SO01
    3. Write a message and send it to <your_internet_email_address>
    4. If you don't see the mail in your internet mailbox, go back and review steps 1-12
    Schedule the SAP Internet Mail Gateway Jobs to start every 5 minutes
    1. Create
    2. Position your cursor at INT
    3. Click Schedule and supply the date and time
    4. Click Schedule periodically and tick Minutes and type in 5
    5. Click Create and you are done
    6. Click Show Scheduling to check
    Problems that you might encounter :-
    If you have set up a node in SCOT and it tests out well but recieve the reply.
    "Cannot process message in node, parameterscannot be converted".
    Make sure the RFC connection is working, and that SapConnect has been installed on the Unix Server or the Microsoft Exchange Server. Originally, I had the same error, and found that nothing had been installed on Unixor Exchange, to support SapConnect.
    In SCOT (View -> System Status), your mail remains at the Intransit column.
    Check you sendmail.cf files (e.g.Sun Solaris /etc/mail/sendmail.cf). Try using the sendmail command to send a test file at the Unix level. You must be able to send mail at theUnix level before you can send mail at the SAP level.
    http://help.sap.com/saphelp_nw04/helpdata/en/cf/700b405bacdd5fe10000000a155106/content.htm
    http://www.tamboly.com/SAPEmailConfiguration.html
    Check my previous links
    Mail Send
    sending mails from abap program
    Mail Sending to external email id's
    settings needed for sending emails
    Regards
    Pavan

  • Sending mail from sap Inbox to outlook

    Hi All,
    Iam new to SAP workflow. Here I need to send the mail from SAP Inbox to Outlook for high priority keeping red flag as icon.
    can anyone tell me how to set up this and go ahead to start.
    Thanks
    Kumar

    IF I understand you correctly, you want to send a mail to Outlook (external email address) as a step in Workflow.
    If you are on Release 6.20 or above the following solution will work. I do not remember what is available in earlier releases.
    1) Define a multiline element based on SOXNA-FULLNAME to hold the email addresses. How you populate this element with the addresses depends on your requirements.
    2) Insert a Send Mail step in the workflow.
    3) In the Mail Tab, Select 'U' as Recipient Type.
    Assign the Multi Line element defined in Step 1 to E-Mail Address.
    4) Define the Subject and the body as needed.
    Please note that you should have External mail sending from SAP enabled and a batch job that runs periodically to push the mail.
    Cheers,
    Ramki Maley.

  • How to prevent other users to send mails from SAP?

    Hi,
    Our test system is a copy of the prod.  We could not deactivate the mail job because it is also used by solution manager.  So how can we prevent other users to send mails from SAP? 
    thanks,
    krbas

    Hi K Bas,
    Then I will suggest trying this option out. In SCOT select the node for SMTP (depending on if you are using standard SAP node). Double click and a push button will come Now in the pop you will have option for Internet with a push button SET besides. Please go there. In the next screen you will find a filed for Address area. Now in this field give the value as *.sap.com
    Using address area you can decide to which e-mail addresses is the mail sent to. Since the OSS message will go to <abc>@sap.com that is why I have suggested to use *.sap.com
    I mean if you want that mails should be sent via SAP only yahoo mail accounts then you will give value as *.yahoo.com only. Same thing needs to be applied for SAP.
    Try this out and let me know.
    Please award points if solved.
    Regards.
    Ruchit.

  • How can i autoforward that mail from SAP INBOX to the outlook

    Hi ,
    My Requirement is that,
    I have to send an email to outlook, whenever PO Created in SRM System
    I have created  custom workflow, i have added a sendmailtask step, i given the SAP userid to send SAP Mail to the user.
    It is sending SAP Mail to the User to his inbox perfectly.
    Now, how can i autoforward that mail from SAP INBOX to the outlook. This is has to work for all users.
    Please give some suggestions. ot it can be achived any other way.
    Note: This is Email Message not a workitem.
    I have doubt that RSWW program will work only for workitems.*
    Thanks & Regards,
    Suresh.

    Hi ST,
    what I understand from your requirement is that you are able to send messages using SendMail Step to SAP Inbox and now you want it to be sent to users Outlook.
    Here you need to create a container which would store users email address of Outlook (which would be stored in SU01 or in a ztable), use this container in your Send Mail step and in the Recepient Type as email.
    Hope it helps.
    Aditya

  • Problem sending externail mail from SAP

    I am facing problem in sending external mail from SAP. for ex: yahoo, hotmail like that. But, i can able to send the mails to my domain ids. I have configured both the SMTP and SAP internet gateway to send mails.
    But, i dont know what could be the problem in sending external mails.
    Is there any body to help me in this regard
    Regards,
    B.Sudharsan

    Hi Sudarsan,
    How are you trying to send an e-mail using ABAP or using actions or ?
    Enclosed link gives you a complete overview of the settings and the way to send an e-mail using ABAP ( if necessary).
    /people/thomas.jung3/blog/2004/09/08/sending-e-mail-from-abap--version-610-and-higher--bcs-interface
    Reward points if it helps.
    Regards,
    Vamsi Krishna P.

  • Problem in sending mails from SAP

    Hi Gurus,
    Let me explain the problem what I am facing.
    We have configured for sending automatic mails from SAP to lotus when a PO is created. Also mail details for both sender and recipient are maintained.
    But when I create/change a PO, I am getting the error message 'route is not found'
    (Error code XS826).
    Please throw some light on this.
    -B S B

    When you did the SCOT maintenance..Add the address areas.
    To do this..double click on the node for the smtp...in the supported address types group select the internet check box and click the set button...In the popup screen there is a table control for address areas..make the required entries there....
    Pls check that you have also set your default domain....It is in the menu option
    Settings --> Default Domain...
    And also Check the mail status in SAP in transaction SOST . If its not green then it is waiting to be send .
    You can start send process by running program RSCONN01 with MODE = 'INT' or trigger it from transaction SCOT .
    On production environment the program RSCONN01 is schedued as job to send mails in que at ceratin intervals.
    Rgds,
    Naren

  • Error while sending mail from SAP

    Hello All,
    Recently we are facing an error while sending mail from SAP. When we try to compose a message ,it is moving to a dump error RAISE_EXCEPTION.
    The details from ST22,
    Short text
        Exception condition "FOLDER_NOT_EXIST" raised.
    Error analysis
        A RAISE statement in the program "SA
        condition "FOLDER_NOT_EXIST".
        Since the exception was not intercep
        program, processing was terminated.
    Kindly suggest..
    Thank You,
    Regards,
    Hasan

    Hello Priyanka,
    Actually, I performed the following two steps in order to solve the issue:
    - In transaction SICF, the node for SAPConnect must be active. In our system, this node was in inactive state. Hence I activated it.
    - Then In transaction SCOT-> Settings menu--> default domain should be 'xyz.com' if the email addresses in your company are maintained with a suffix  xyz.com.
    But for me the problem didnt get solved here..
    The problem that i am facing now is that if in my user profile, I have the email address maintained, then i get an error saying 'Sender address rejected'. However, if i goto transaction SU01 and clear the email id, the mail is successfully sent to outer world.
    You can try the above mentioned two steps using SICF and SCOT. If the problem does not get solved then try clearing the mail id in ur user profile.
    Hope this helps. If you find an answer to the problem of the mail id getting cleared, then please let me know..
    Regards,
    Himanshu

  • Error while sending mails from SAP

    Hello Experts,
    I am facing the below problem:
    If an error occurs during the processing of a Z SAP transaction, an email needs to be sent to the user who is executing the transaction.
    So, in this case the sender and receiver is the same user.
    But the problem that i am facing is that for sending the mail from SAP, i have to maintain the email address in the user profile as blank. If I maintain some email address in the user profile, i encounter the following error:
    Internal error: CL_SMTP_RESPONSE ESMTP error code is not known. 554 554 <email address>: Sender address rejected .
    Please help me resolve this.
    Thanks a lot in advance to answer the above query.
    Regards,
    Himanshu

    Hi Himanshu,
    I think its the problem with mail server configured in ur system.
    Please contact ur basis Person.Ask him to chk The SCOT tcode once.Maybe ur SMTP configuration is not done properly.Also chk this sap note  455140 - Configuration for e-mail, fax using SMTP
    Regards,
    Lakshman.

  • Can not send mail from PR Workflow to the approver

    Dear all,
    I have issues about send mail from PR Workflow to the approver.
    Now when user create PR and the corresponding user can receive the workflow items in SBWP.
    But no email from the user to approver.
    If I assign authorization SAP_ALL to the user that create PR. The approver can recieve the workflow item PR in SBWP and email to their mail
    Can you tell me about the authorization that can allow the user to send the workflow item PR in SBWP and email to the approver?
    Now user can send mail to external and internal mail and I also configured the mail server in SCOT and can successfully send a mail to users in SO01 by manually creating a message.
    Now the approver not receive any email but can receive a workflow item in SBWP
    Regards,
    Pannee

    Dear all,
    Thank you for all suppport, Now I can solve issues.
    Regards,
    Pannee

  • E-mail from SAP R/3 to Outlook

    Hi,
    I am facing issues when attempting to send e-mails from SAP R/3 to Outlook it gives following error. E-mail id of the user id correct but for some reason but I still get these odd error/no message.
    There is no resource constraint from SAP R/3 side, I have even seen a case when both the e-mail ids(To & CC) were correct. It failed on CC and TO went successful and visa-versa.
    1. When E-mail is erroring out in SOST
    Internal error: No Send Order Generated. Error Code:NI_SREQ
    Internal error: No Send Order Generated. Error Code:NI_SREQ
    Message no. XS829
    Diagnosis
    An error occurred in program No Send Order Generated. Error Code:NI_SREQ
    Error text:
    Additional information:
    System Response
    Message processing terminated.
    Procedure
    Report the error to the SAP Hotline.
    Log :
    04/11/2007     10:30:28     Document sent
    04/11/2007     10:30:28     Wait for communications service
    04/11/2007     10:30:35     Internal error: No Send Order Generated. Error Code:NI_SREQ
    04/11/2007     10:30:36     Document deleted from queue
    2. When NO STATUS is updated in SAP - SOST.
    Recipient  Is Valid. Delivery Attempted
    Message no. XS718
    Diagnosis
    The communication system recognized the recipient  as valid and will send the message to this recipient, or will generate an appropriate status message if the message cannot be delivered.
    System Response
    Processing was completed normally.
    Additional information on the node used (in the system language of the node, if available):
    250 2.1.5 [email protected]
    Procedure
    No action is necessary.
    04/11/2007     11:00:41     Document sent
    04/11/2007     11:00:41     Wait for communications service
    04/11/2007     11:05:35     Recipient Is Valid. Delivery Attempted
    04/11/2007     11:05:35     Document deleted from queue
    Appreciate your help in resolving the issue.
    Thanks
    Nani

    Default domain is maintained.
    This issue is happening only with few users when they are trying to send a mail through some customized Z t-code.
    Recipient ................... Is Valid. Delivery Attempted.
    Message XS718.
    Pls advice.

  • Error in sending mail from SAP to microsoft outlook

    Hi all.
    Greetings.
    I have a requirement to send mail from SAP to Outlook.
    SMTP is configured here....i have checked the steps.
    I am using FM "SO_NEW_DOCUMENT_SEND_API1" to send the mail text.
    when i check the SOST Tcode i got message "Wait for communications service".
    after evry 10 minutes the sap connect all process runs..as it is configured in SCOT transaction, but even after 30 minutes the mail is not sent.
    I don't know how should i check the error message?
    tell me the checking stepls plz?...how should i step through in checking this?
    what are the prerequsites for sending mails from SAP to Microsoft outlook?
    regards
    Prashant Tiwari
    Edited by: prashant tiwari on Feb 6, 2009 10:26 AM

    Hi prashant,
    Pls refer to the link below:
    Re: Inbound Email- SAP Connect
    or
    check your userid .
    If not correct  no mail will go from u r id.
    Try it with another user id.
    or try using the following function module
    'SO_NEW_DOCUMENT_ATT_SEND_API1'
    I Hope this helps you with the issue.
    Thanks
    Ravi Aswani

  • How to read a mail from sap inbox thru abap code?

    how to read a mail from sap INBOX thru abap code? can anyone tell me the technical approach? I NEED TO READ A MAIL and then need to pass the parameters to a bapi.
    Message was edited by:
            shahid mohammed syed

    Hi SSM,
    Did you manage to have your program working? I also have same requirement. I tried standard FM and BAPI but I always encounter authorization error when I tried accessing other user's mail. Thanks.
    Regards,
    Ryan

Maybe you are looking for