Internet not working when turn on airport

Hi All,
I am using snowleopard .USB data card is using for internet from reliance.When airport is on I am not able browse.
If I do airport off,I am able to browse.This problem is not comming when I am using windows.
Any changes required from MAC OS side.your help is highly appriciated
Thanks
Logan

I think that others could provide better suggestions if you provide a clear description of your network setup. You obviously have two computers that have wireless capability but I'm not clear if you are using a wireless router or if you are connecting the one Mac through Ethernet.
Unless you have a specific reason that you cannot do so, each computer should connect directly to a wireless router instead of trying to use Internet Sharing.
If you give some clear details of your setup, and why it's set up that way, then I'm sure that there are some folks that can help figure this out for you or suggest a better configuration.

Similar Messages

Internet not working after turning Airport on

Hello,
All of a sudden, I can not connect to the internet when I turn the Airport on. The signal looks strong. But when I open my browser, it gives an error page. On a cafe where there is a free wireless internet that I go to often and had no problems connecting, gave me this message recently.
IP Configuration
192.168.1.46 in use by 00:18:39:88:81:fc, DHCP Server 192.168.1.1
Is there anything that I need to update in my Airport settings? If so, where? I have been trying to look for that and don't seem to have any luck.
Thanks for any help.
Rich
G4 Mac OS X (10.4.8)

See your other thread " Internet not working after turning Airport on".

HT4993 why does my internet not work when not connected to wifi?

why does my internet not work when not connected to wifi

Hi farmgirl0812,
Thanks for using Apple Support Communities. This article has steps to try if you are unable to connect to a cellular network:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Cheers,
- Ari

Internet not working when wifi on

I'm on Mac osx mavericks and the internet was working fine for some time but randomly stopped working. I figured the problem was because the WiFi sharing is on when I turn the WiFi off it works but turn it back on and I can't use the internet on my Mac. The internet sharing works also when it's on. I don't know how to make it work with both on.

I think that others could provide better suggestions if you provide a clear description of your network setup. You obviously have two computers that have wireless capability but I'm not clear if you are using a wireless router or if you are connecting the one Mac through Ethernet.
Unless you have a specific reason that you cannot do so, each computer should connect directly to a wireless router instead of trying to use Internet Sharing.
If you give some clear details of your setup, and why it's set up that way, then I'm sure that there are some folks that can help figure this out for you or suggest a better configuration.

Internet not working on Non-Equipped Airport iMac w/ AE wired via Ethernet

I have a total of (3) non-equipped airport computers that I wanted to share Internet thru the (2) AEs and (1) AEBS. Using one computer, I manually configured the AE and powered it down, then using the same computer I configured the AEBS, then powdered up the AE and it showed SOLID GREEN!. FYI...I did select it to communicate with the AEBS by WDS. Now I have the Flowerpower iMac with ethernet cord plugged into the (1) AE, and it still has the Solid Green Light. The Built-in ethernet is not communicating with/to the Internet??
I went to "System Preferences" on the computer to check the "Network" settings. Is this where the problem lies?? Under the "TCP/IP" it has the "Configure" with options,which should it be? (Manual, DCHP, or DCHP with manual address)?
When I choose "DCHP", it self assigned the IP Address and then states that it might not be able to connect to the Internet, the "manual" and "DCHP with manual" states that I am connected, but it can't find the server web address that I'm looking for. I originally configured the AE using the info I got off of the AEBS, but not the exact same IP Address or Mac Address. I also configuring the Network Internet settings on the computer with that I found from the "System Preferences" on the graphite iMac with the RCA modem and AEBS attached via ethernet cables.
I think I'm getting confused... The AEBS has thru the Airport Admin. Utility:Internet, airport, network and WDS settings, the computer that's connected to it has thru the System Preferences: Network built-In ethernet with TCP/IP and ethernet settings, the AE has thru the Airport Admin. Utility: Internet, airport, Network and WDS settings and the computer connected to it has thru the System Preferences: Network built-in ethernet with TCP/IP and ethernet settings.
Do they all share some of the exact same information? Is there some fields that I don't need to fill in or select? If I'm manually filling in the information, Where do pull that correct information from?
Okay after stating that, it makes me sound like I don't have a clue and I'm just lucky that I got the AE to turn on Green. But I haven't found anything published addressing this exactly and straight forward.
Can anyone who has done this and succeeded go over this step-by-step? and unravel the all twisted up information that's going around and around in my head?
iMac G3 Graphite, iBook G3 Graphite Clamshell, iMac G3 FlowerPower Mac OS X (10.3.9)

I had to manually configure the AX and the Built-In Ethernet on the flowerpower iMac, when I tried to do it automatically with DCHP, it self-assigned the IP Address and would not let me connect on the Internet nor was the light green. I remembered iFelix's instructions stating that I would have to do it manually and the light turned green again! and my email works on the graphite BUT now I can't get the AX to appear in the Airport Admin. Utility, so I rechecked my settings thru the Airport Admin. Utility and in the Airport I checked the "enable the IR option". and............ well It appeared and I went to the flowerpower iMac with my daughter by my side, we both held hands eagerly awaiting to see if the web page would load and........ and......... and....... and......... and........ WWWWWWWWWWWWWWWAAAAAAAAAAHHHHHHHHHHOOOOOOOOOOOOOO she screamed, I screamed, she screamed again sooooooo loud that I didn't notice that I was still screaming too! IT WORKS!!!!! It REALLY WORKS!!!!!!!
Look, are you looking? Can you see I'm smiling ear to ear!!!!!
YOU CAN DO THIS!!!!
For anyone wanting tips, please refer to my other thread Re: Can the Airport Express be used as an external card too? start by me.

USB Drive does not work when connected to Airport Extreme

I had an external drive connect directly to my iMac and recently purchased an Airport Extreme. When I plugged it into the USB point on the back of the AX has an odd name and won't allow access. When it was configured directly to my iMac it was named TheVault, now it is TheVault???. When I try to access via Go>Network in finder menu, I get "The operation cannot be completed because the original item for "TheVault??? cannot be found." Another detail if found in the GetInfo it that it shows 0kb available. All things point to it's existence as a drive but it has no access to the data that was clearly there when it was plugged into the back of the desktop. Jack sends.

TheWack wrote:
I had an external drive connect directly to my iMac and recently purchased an Airport Extreme. When I plugged it into the USB point on the back of the AX has an odd name and won't allow access.
Did you use AirPort Utility to enable disk sharing?

Airport: Internet not working

Airport has self assigned IP address and will not connect properly to the internet. Have tried manually entering the IP address from another computer on the same network but still cannot connect to the Internet...Any advice/suggestions much appreciated

See your other thread " Internet not working after turning Airport on".

Why does the internet on my new macbook pro not work when my old macbook's does?

Why does the internet on my new macbook pro not work when my old macbook's does? I'll have to turn the wifi off and back on multiple times to get the internet to continue to work on my Macbook Pro (running mountain lion but did it on lion also) when it runs fine on my old white Macbook (running lion). Is there something I can do to fix it or do I just have to deal with it?

Here is your fix .. I have uploaded my properly calibrated profile get it here :
http://www.megaupload.com/?d=YAJL6A9X
And it should go to your user folder/Library/ColorSync/Profiles
if you have one already you can rename either one ..
and then go to system preferences - displays - color to select the profile .
you will get rid of the blue tint while keeping correct color and gamma
This is for the newer 2010 MBP's altho if same display was used might also give good results in the previous models as well . .

Just upgraded to Lion an am discovering that I cannot send email photos from within iPhoto. Error message says bad Internet connection or server not working, when that's not the case. Never happened in Snow Leopard! Help!!!

Just upgraded to Lion an am discovering that I cannot send email photos from within iPhoto. Error message says bad Internet connection or server not working, when that's not the case. Never happened in Snow Leopard! Help!!!

what email service - Yahoo mail have been acting up lately
you can try setting Mail as your email client - it resolves this pfoblem for some people
LN

Why does the alarm not work when the iphone 4 is turned off

why does the alarm not work when the iphone 4 for is turned off works fine when on most other phones work when off

The only phone I've ever had that would turn on and sound the alarm is a Blackberry. So, I'd hardly say "most phones" have this function.

The remote does not work, when i turn the tv on I see the apple tv and the itune icon on the screen

the remote on apple tv does not work,when i turn on the tv Isee the appletv and the itune icon on the screen.

Did you do a software update?
AppleTV is unable to start properly. You need to connect to a computer running iTunes as detailed here:
Apple TV (2nd and 3rd generation): Restoring your Apple TV

My do not disturb is not working, when i turn it on my phone still rings and vibrates

My do not distub button is not working, when i turn it on my phone will still ring and vibrate

Do you have the screen off? If you're using the iPhone at the time, calls and messages still come through as normal.

Hi Team, Showing Yellow icons after every 15 to 20 Min and internet stop working.when we enable- disbale the network connection then will internet start working fine.Some time network connection is disable but when we renable that connection it will st

Hi Team,
Showing Yellow icons after every 15 to 20 Min and internet stop working.when we enable- disbale the network connection then will internet start working fine.Some time network connection is disable but when we renable that connection it will stuck on enabling
and will not renable till i am not restart that machine. I have 350 Machine in network but facing this issue in 25 machines. Kindly help me on this issue .
Regards
Sahil bhateja

Hi，
So switch a LAN card fix this issue...seems a compatibility issue or maybe some packs or programs you installed recently cause this issue.
Have you manually check the network adapter driver from the PC's manufacture website? sometimes, it will be a time delay before Microsoft push out the driver update.
Check if issue exists in safemode with network, this mode will launch Windows with limited sets of files and drivers.
if you have a restore point, restore the pc to a previous point at which the pc is functioning fine.
Yolanda Zhu
TechNet Community Support

The button on my Ipod Touch (the big one just below the screen) will not work when I press it. Nothing happens, when before it would wake my IPod out of sleep mode, and exit out of programs I was using. Now, no reactions. What should I do?

The button on my Ipod Touch (the big one just below the screen) will not work when I press it. Nothing happens, when before it would wake my IPod out of sleep mode, and exit out of programs I was using (ex. ITunes or Safari to main screen) . Now, no reactions. When I press the button, it appears to be more indented then it was before. What should I do? Do I need to get it fixed or replaced, or is this a problem I can fix on my own? Whatever it is, I really need some advice. Thanks in advance.

Try:
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

Our online number is not working when trying to ca...

Hej
Our online number is not working when trying to call from Telia mobile phones in denmark. I have checked with Telia in Denmark and they tell us that the problem is a "prefix" that is set wrong from SKYPE's side?
Could someone at skype please help get this fixed, as some of our customers can not call us.
Br.
Søren

Hi,
I have the pretty same problem: cannot receive calls from skype (internet) on my cell phone. I went to Telenor, but they said it has something to do with skype, not with them.
Skype staff !!! Help !

Internet not working when turn on airport

Similar Messages

Maybe you are looking for