Internet on VirtualBox

Hello,
Today, I managed to install oracle enterprise linux 5 guest os on my mac host virtualbox after a long battle. Now, I cannot connect to the Internet. I followed exactly as said here:
http://www.oracle-base.com/articles/linux/OracleEnterpriseLinux5Installation.php
Please help me.
Thank you
Abdul

How to access the internet on Linux is not really an Oracle XE problem, maybe this helps:
http://linux.about.com/od/linux101/a/desktop07.htm
Werner

Similar Messages

  • No internet/DNS connection with Arch guest on Virtualbox

    I am trying to run Archlinux as a guest OS in Virtualbox on an Ubuntu 7.10 host system, and I cannot connect to anything but my router. So far, I have only installed the base system (Arch Linux core 2007.08-2) from a CD.
    I can ping the localhost (both on 127.0.0.1 and 10.0.2.15) and my gateway (10.0.2.2), but not my DNS server (10.0.2.3) or anything else (like www.google.com). So far, I went through the "Beginners Guide", the "Official Arch Linux Install Guide", the configuring network section of the ArchWiki, and tried to find some solution on the internet. Still no luck.
    I have set up networking to use dhcp. The networking section in my /etc/rc.conf file looks like:
    HOSTNAME="arch"
    lo="lo 127.0.0.1"
    eth0="dhcp"
    INTERFACES=(lo eth0)
    ROUTES=(!gateway)
    The daemons that run during startup are:
    DAEMONS=(syslog-ng network netfs crond)
    I have put the hostname in the /etc/hosts file like:
    127.0.0.1 localhost.localdomain localhost arch
    The nameserver that shows up in my /etc/resolv.conf file is:
    nameserver 10.0.2.3
    I am a bit puzzled and I don't know what to do. I do think it is an Arch issue, since I also have Windows XP running in a Virtualbox with Ubuntu as host, and that works fine with the same Virtualbox settings and network settings within the guest OS.
    I would appreciate any help here.
    Last edited by Average Joe (2008-04-19 12:41:29)

    Try reading the VirtualBox manuals.
    I specifically remember that ping doesn't work at all, although you DO have internet connection.
    Try running some sort of web browser (firefox or links), and then decide if you have internet access or not.
    And, of course, make sure you do have dhcp running ("dhcpcd eth0").
    One last thing:
    I have an Arch guest (on VirtualBox), running on an Arch host.
    Everything works fine..
    Simply installed it from the installation CD, didn't have to do nothing special for it to work..
    Last edited by fiod (2008-04-19 13:41:19)

  • How to simulate server 2012+clients connetion in virtualbox without internet connection

    Hi, I am new to this forum and also not familiar with simulation in virtualbox. I want to know how to simulate server 2012+clients connection in virtualbox without internet connection. I couldn't join the client computer (windows 7 installed) to
    the domain (the  windows server 2012). I already added the DHCP , AD DS and DNS roles features in the windows server 2012. Can someone put me through?

    If you're using VirtualBox you might be better off asking this over on their forum
    https://forums.virtualbox.org/, since it's not a Microsoft product. That said I have used it myself, and I think what you need is to ensure you're using the Internal Networking option
    http://www.virtualbox.org/manual/ch06.html#network_internal and make sure that both virtual machines have their network card setup with the same name / network ID. Once that's done you
    can configure them on the same network range and they should be able to communicate.

  • VirtualBox: How to share a guest's (XP) internet with the host (OS X)

    I have an internet connection that can only be used on Windows operating systems (our school requires that we install an .exe login client to connect to the dorm internet). As I am currently using a Mac, my goal is to get the internet running in XP in a virtual machine, and then share the virtual machine's internet with the host. Here's what I've done so far (I'm pretty new to all this, so sorry if I leave out anything important!):
    1) Install VirtualBox, create a new XP virtual machine
    2) Add a Bridged Adaptor NIC to the guest allowing it access to the ethernet port
    With this, I can use the internet fine in the guest, but have no internet in the host. (Note: Making the NIC NAT does not work. When set to NAT, the login client in XP can't find the school's server and I can't use the internet). The next step is getting the guest to share it's internet with the host. Here's what I've tried:
    3) Add a second Host-only Adaptor NIC to the guest specifying the following:
    IP: 192.168.22.2
    Network Mask: 225.225.225.0
    DHCP Server unclicked (disabled)
    4) In the guest, enable Internet Connection Sharing for the internet connection.
    At this point, LAN 2 in the guest (the connection to the host, I think) gets automatically configured with an IP of 192.168.22.1 and the same mask as above. Back in the host, I can ping 192.168.22.1 and get a response. But no internet.
    I feel like I'm missing a step, namely how do I instruct the OS X host to use the Host-only connection as its internet connection? I can see the connection ("vboxnet0") when I use ifconfig in the terminal but I have no idea how to use the connection for internet. Anyone know how I can do this?
    Thanks for your help!

    OS X is passing the Internet connection to the guest OS, it doesn't work the other way around.
    You will have to install Windows into Bootcamp and I don't think XP is supported any longer, however Win 7 Pro+ will run most XP programs.
    Windows in BootCamp or Virtual Machine?
    You'll of course be booting the Mac directly into Windows and thus OS X won't be running, thus you can't share the Internet connection to OS X.
    Another alternative is to use a Windows 7 Pro+ machine to connect to the network and then sharing it's Internet connection to the Mac via Ethernet cable or wirelessly.

  • Can't establish internet connection with NAT network in Oracle virtualbox

    Hi all,
    I am new to Oracle virtualbox. I have created a new virtual machine with Oracle linux 5.5 (64bit). I have enabled the NAT networking adaptor so as to access internet connection from the VM. But I am not able to do so.
    Here are the network settings in the VM
    1. Automatically obtain IP address settings with DHCP
    2. Firewalls are disabled.
    The 'eth0' device shows active status. The #ifconfig command lists "inet address" as 10.0.2.15.
    Please let me know if any additional configuration is required for establishing the internet connection in the VM.

    The NAT engine of Virtualbox automatically provides a router between the network interface of your host system and the virtual network interface of your guest OS and offers the same DNS servers to the guest that are configured on the host.
    For more information how it works, see http://www.virtualbox.org/manual/ch06.html#network_nat.
    The problem you are experiencing is most likely with the network configuration of your host system.

  • Virtualbox + Network issue (I need internet explorer for work)

    Hi all! I have a very strange problem. I just got a new job, and I can only add and view my worktime through internet explorer. Wine didn't help, so I installed $hitdow$ XP in a virtualbox. Even before I opened a browser or used the connection for anything, I got a virus (dl.exe in a dos cmd window), and there's no problem basically with that install disk.
    Anyway the strange issue: Internet explorer after around 2-3 minutes of work says, there's no connection. I go to run/cmd and ping, and it works. Does someone have an idea, how to make IE work in wine? (aur bin32-wine-gecko didn't work, only the virtualbox solution was working yet (for 2-3 minutes), but I would be happier with a wine-based solution)

    after exiting, IExplore.exe and wineserver and explorer.exe gets stuck and eats one full cpu core. it's time to create an exit bash script

  • WinXp Pro as Virtualbox Guest can't ping router/internet

    Hi:
    I am running Arch 64 and installed virtualbox_bin 2.0.4-1 from AUR and guest additions 2.0.2-1 from AUR.
    I have installed as a guest os, WinXP Pro and set up bridge networking per
    http://mychael.gotdns.com/blog/2007/05/ … -bridging/.
    My Arch host works fine (it can access the internet and ping the guest WinXP Pro). My WinXP Pro guest can ping my Arch host and other local machines on my network. However it cannot ping my router or access or ping the internet.
    I log onto the WinXP Pro as the Administrator and I have the firewall disabled, so I don't think it is being blocked on the XP side by anything.
    As far as Arch goes, I have tried adding the host name of the WinXP Pro machine to /etc/hosts and put the ip adress of the XP machine into /etc/hosts.allow. Neither of these actions resulted in success. I don't think I have a firewall or other special security measures on my Arch? I just did a fresh ftp install yesterday and did not add ssh or other security measures that weren't included in the default install and the base-devel install.
    My search of the forums turned up a similar problem to mine that was solved by removing the firewall in the WinXP guest. I have already done that still without success.
    My uneducated guess is that the gateway ip is not getting to the guest. I am using static ip for both the Arch host and the WinXP guest. The WinXP guest says that it is connected and reports no problems. I tried using dhcp on the XP guest but that didn't work either.
    Here is the network section of my /etc/rc.conf
    lo="lo 127.0.0.1"
    BRIDGE_INTERFACES=(br0)
    bridge_br0=(eth0)
    br0="br0 192.168.1.201 netmask 255.255.255.0 broadcast 192.168.0.255"
    eth0="eth0 0.0.0.0 promisc"
    INTERFACES=(lo br0 eth0)
    gateway="default gw 192.168.1.1"
    ROUTES=(gateway)
    Any help would be much appreciated.
    bdika

    Hi Floris:
    Thanks for the reply.
    I originally tried the Arch Way without success, that is why I tried the other way.
    However at your suggestion, I have tried the Arch Way again, with the same results. That is I can ping other computers on my network but I can't ping my router nor access the internet from my guest.
    Seeing that I have the same problem regardless of which method I use leads me to believe that it must be something simple and obvious that I am doing wrong. But what??! I have no idea.
    Any thoughts you have would be much appreciated.
    bdika

  • Erros na instalação de sistema dentro do Virtualbox

    Pessoal,
    Alguém poderia me ajudar a descobrir o que está de errado com meu computador?
    Tinha um software que tem drives que só funciona até o win 7 (32bits) e minha máquina tem o win8 64bits.
    Primeiro tentei instalar em modo de compatibilidade mas não funcionou. Primeiro deu aquele erro de driver não assinado do Win8...
    Consegui informações de como desabilitar mas mesmo assim a instalação falhou.
    Então tentei usar o Virtualbox 4.3.16 fiz tudo como manda o manual e também vários tutoriais no Youtube... mesmo assim cai na armadilha do Virtualbox não reconhecer sistemas 64bits. Desinstalei e reinstalei tudo de novo achando que tinha ocorrido um erro na primeira instalação.  Achei um tutorial que mostrava que devia habilitar na Bios a virtual machine.
    Bom, agora com tudo funcionando, já tentei diversas vezes instalar o Win7 sem sucesso. já fiz download de 09 ISO diferentes e, sempre que tento instalar, cada um deles acaba dando um erro diferente...
    Em alguns nada acontece, apenas fica uma tela preta ... em outras alerta que falta BOOTMGR, em outras começa a instalação e trava a 93%  e assim por diante.
    Como acho impossível que todas essas 9 versões que baixei da internet (alguma originais da Microsoft) tenham problema, acredito que seja algum problema relacionado com configuração da minha máquina, seja na BIOS, seja nos aplicativos ou recursos do Windows 8 que estão configurados ou habilitados de alguma forma que o Virtualbox  não consegue instalar nada.
    Fiz vários screenshot mostrando que dependendo da imagem ISO utilizada, um novo erro aparecia... deixei parte do programa aparecendo a configuração no momento. Vocês podem verificar que tentei várias configurações e ISOS.
    Por favor eço que me ajudem a descobrir o que pode estar acontecendo que impede de eu usar o Virtualbox.

    Nesse caso o ideal seria você criar uma maquina como servidor dai todas as maquinas usariam os programas instalados na maquina servidor,assim você configura e instala uma só vez o sistema

  • [SOLVED] Can't get Steam to work, VirtualBox installation

    Hello!
    I'm having problems with getting Steam to work on my Arch Linux installation. I'm new to Linux so I'll just give you a prehistory & console output. I installed the distro on a virtual machine created in VirtualBox, installed xorg & KDE, I didn't install any video drivers because this is what wiki says:
    https://wiki.archlinux.org/index.php/VirtualBox#Installation_steps_for_Arch_Linux_guests wrote:Note: You do not need to also install a specific video driver in the guest system. Install the Guest Additions instead.
    So I installed "virtualbox-guest-utils" package, created a file /etc/modules-load.d/virtualbox.conf with the following contents:
    vboxguest
    vboxsf
    vboxvideo
    Then I executed
    sudo systemctl enable vboxservice
    and rebooted the system. After the reboot I got the shared clipboard feature working => VBox Guest Additions seemed to work. Then I installed "steam" package, launched it via the terminal and waited for it to download it's updated. After Steam downloaded everything, I tried to launch it once again via terminal and got this:
    Running Steam on arch  64-bit
    STEAM_RUNTIME is enabled automatically
    Installing breakpad exception handler for appid(steam)/version(1405013548_client)
    Xlib:  extension "GLX" missing on display ":0".
    Installing breakpad exception handler for appid(steam)/version(1405013548_client)
    Installing breakpad exception handler for appid(steam)/version(1405013548_client)
    Installing breakpad exception handler for appid(steam)/version(1405013548_client)
    Xlib:  extension "GLX" missing on display ":0".
    OpenGL GLX extension not supported by displayAssert( Assertion Failed: Fatal Error: OpenGL GLX extension not supported by display ):/home/buildbot/buildslave_steam/steam_rel_client_ubuntu12_linux/build/src/steamUI/Main.cpp:285
    Installing breakpad exception handler for appid(steam)/version(1405013548_client)
    Uploading dump (out-of-process) [proxy '']
    /tmp/dumps/assert_20140712040049_6.dmp
    Finished uploading minidump (out-of-process): success = yes
    response: CrashID=bp-e2313069-9637-4ef3-aeee-fe3b92140711
    and a GUI window saying "OpenGL GLX extension not supported by display". I tried to find a solution on the internet but they all mentioned installing Nvidia drivers. And VirtualBox GPU != Nvidia GPU.
    Is there any way to solve this? Steam is working on my Fedora-VBox (this is the distro our lecturer uses as an example to teach us about Linux) installation out of the box.
    EDIT: forgot to mention that system is x86_64, multilib in enabled, 3D acceleration in VM settings is enabled.
    Last edited by Nathel (2014-07-12 22:10:16)

    Fixed the issue by replacing nvidia-libgl with mesa-libgl & lib32-mesa-libgl.

  • How do I remove Virtualbox from Macbook Pro?

    Remove virtual box!
    I am having slow issues with Mavericks since I updated. I have plenty of ram. I posted a thread and this person helped me and found virtualbox on my computer. I have never used windows on my computer. I was told by apple store to buy more ram for the slowness of my computer spinning disk when i type or open a program. I think removing virtual box will help but we are having a hard time removing it. After trying a few things he said "VirtualBox is still hanging around, and loading extensions, at this point you need 'hands on' help to remove it, this method isn't working.” Anyone know how to remove virtual box from a mac? Thought I would try one more time! and here is some more info. Thank you so much
    Hardware Information:
              MacBook Pro (13-inch, Early 2011)
              MacBook Pro - model: MacBookPro8,1
              1 2.3 GHz Intel Core i5 CPU: 2 cores
              4 GB RAM
    Video Information:
              Intel HD Graphics 3000 - VRAM: 384 MB
    System Software:
              OS X 10.9.2 (13C64) - Uptime: 1 day 21:6:2
    Disk Information:
              Hitachi HTS545032B9A302 disk0 : (320.07 GB)
                        EFI (disk0s1) <not mounted>: 209.7 MB
                        QWER (disk0s2) / [Startup]: 319.21 GB (157.31 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
              MATSHITADVD-R   UJ-898 
    USB Information:
              Apple Computer, Inc. IR Receiver
              Apple Inc. FaceTime HD Camera (Built-in)
              Apple Inc. Apple Internal Keyboard / Trackpad
              Apple Inc. BRCM2070 Hub
                        Apple Inc. Bluetooth USB Host Controller
    FireWire Information:
    Thunderbolt Information:
              Apple Inc. thunderbolt_bus
    Configuration files:
              /etc/hosts - Count: 1
    Kernel Extensions:
              com.globaldelight.driver.BoomDevice          (1.1 - SDK 10.9)
              org.virtualbox.kext.VBoxDrv          (4.0.8)
              org.virtualbox.kext.VBoxUSB          (4.0.8)
              net.telestream.driver.TelestreamAudio          (1.0.5 - SDK 10.6)
    Launch Daemons:
              [System] com.adobe.fpsaud.plist 3rd-Party support link
              [System] com.disc-soft.DAEMONTools.PrivilegedHelper.plist 3rd-Party support link
              [System] com.freemacsoft.appcleanerd.plist 3rd-Party support link
              [System] com.google.keystone.daemon.plist 3rd-Party support link
              [System] com.machangout.glims.loader.plist 3rd-Party support link
              [System] com.oracle.java.JavaUpdateHelper.plist 3rd-Party support link
    Launch Agents:
              [System] com.coupons.coupond.plist 3rd-Party support link
              [System] com.google.keystone.agent.plist 3rd-Party support link
              [System] com.machangout.glims.agent.plist 3rd-Party support link
    User Launch Agents:
              [not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
    User Login Items:
              None
    Internet Plug-ins:
              o1dbrowserplugin: Version: 5.2.4.18058 3rd-Party support link
              CouponPrinterPluginMac1.0.0.7: Version: CouponPrinterPluginMac 1.0.0.4 - SDK 10.7 3rd-Party support link
              Default Browser: Version: 537 - SDK 10.9
              AdobePDFViewerNPAPI: Version: 10.1.9 3rd-Party support link
              FlashPlayer-10.6: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
              Silverlight: Version: 5.1.30214.0 - SDK 10.6 3rd-Party support link
              Flash Player: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
              QuickTime Plugin: Version: 7.7.3
              googletalkbrowserplugin: Version: 5.2.4.18058 3rd-Party support link
              iPhotoPhotocast: Version: 7.0 - SDK 10.8
              AdobePDFViewer: Version: 10.1.9 3rd-Party support link
              CouponPrinter-FireFox_v2: Version: 5.0.3 - SDK 10.6 3rd-Party support link
              JavaAppletPlugin: Version: Java 7 Update 51 3rd-Party support link
    Safari Extensions:
              AutoComplete+ Personal: Version: 1.0
              Open in Papers: Version: 1.3
              AutoSMS: Version: 1.0
              Reload Button: Version: 1.2
              Gmail Menu: Version: 1.03
              1-ClickWeather: Version: 1.0
              Add To Amazon Wish List: Version: 1.4
              Keyword Search: Version: 1.2
              Add To Amazon Wish List: Version: 1.8
              Ginger: Version: 0.1.0.34
              GoogleToolBar: Version: 1.9
              Pinterest: Version: 1.0
              We Heart It: Version: 3.2.0
              Instair: Version: 1.2.3
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
              AirPlay: Version: 2.0 - SDK 10.9
              AppleAVBAudio: Version: 203.2 - SDK 10.9
              iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins:
              Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    User iTunes Plug-ins:
              TuneUp Visualizer: Version: 2.2.0 3rd-Party support link
    User Internet Plug-ins:
              npBcsMcTcIO: Version: (null) 3rd-Party support link
    3rd Party Preference Panes:
              MusicManager  3rd-Party support link
              Growl  3rd-Party support link
              Flash Player  3rd-Party support link
    Old Applications:
              /Developer/Applications/Performance Tools
              /Users/[redacted]/Documents/Shrunken Apps/Shrunk Apps/Applications/iWork '09
              /Developer/Applications/Utilities/Bluetooth
              /Developer/Applications/Utilities
              SLLauncher:          Version: 1.0 - SDK 10.5 3rd-Party support link
                        /Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
              /Developer/Applications
              PicsAid:          Version: 1.4, Copyright © 2011 DigiDNA Sarl. All Rights Reserved - SDK 10.5 3rd-Party support link
              /Developer/Applications/Graphics Tools
              Get Backup 2:          Version: 2.5 - SDK 10.5 3rd-Party support link
                        /Users/[redacted]/Back-Up/Shrunk Apps/Applications/Get Backup 2.app
              FacebookVideoCalling:          Version: 1.2.0.157 - SDK 10.5 3rd-Party support link
                        /Users/[redacted]/Library/Application Support/Facebook/video/1.2.0.158/FacebookVideoCalling.app
              iSkysoft Helper Compact:          Version: 2.2.6.4 - SDK 10.5 3rd-Party support link
                        /Users/[redacted]/Library/Application Support/Helper/iSkysoft Helper Compact.app
              /Applications/iWork '09
              OmniWeb:          Version: 5.11.1 - SDK 10.4 3rd-Party support link
                        /Users/[redacted]/Documents/Shrunken Apps/Shrunk Apps/Applications/OmniWeb.app
    Time Machine:
              Skip System Files: NO
              Mobile backups: OFF
              Auto backup: YES
              Volumes being backed up:
                        QWER: Disk size: 297.29 GB Disk used: 150.79 GB
              Destinations:
                        Kristen Passport [Local] (Last used)
                        Total size: 931.36 GB
                        Total number of backups: 22
                        Oldest backup: 2013-01-27 16:52:28 +0000
                        Last backup: 2014-03-11 23:51:24 +0000
                        Size of backup disk: Excellent
                                  Backup size 931.36 GB > (Disk size 297.29 GB X 3)
              Time Machine details may not be accurate.
              All volumes being backed up may not be listed.
    Top Processes by CPU:
                   8%          mds
                   3%          Notes
                   2%          WindowServer
                   1%          EtreCheck
                   0%          SystemUIServer
    Top Processes by Memory:
              650 MB          com.apple.WebKit.WebContent
              74 MB          Safari
              61 MB          Notes
              61 MB          WindowServer
              49 MB          com.apple.ShareKitHelper
    Virtual Memory Information:
              566 MB          Free RAM
              2.09 GB          Active RAM
              209 MB          Inactive RAM
              1010 MB          Wired RAM
              403 MB          Page-ins
              12 MB          Page-outs

    Ok, I did what you told me to. i re-installed then uninstalled. Can you please tell me if it is gone?
    Hardware Information:
              MacBook Pro (13-inch, Early 2011)
              MacBook Pro - model: MacBookPro8,1
              1 2.3 GHz Intel Core i5 CPU: 2 cores
              4 GB RAM
    Video Information:
              Intel HD Graphics 3000 - VRAM: 384 MB
    System Software:
              OS X 10.9.2 (13C64) - Uptime: 0 days 0:7:34
    Disk Information:
              Hitachi HTS545032B9A302 disk0 : (320.07 GB)
                        EFI (disk0s1) <not mounted>: 209.7 MB
                        QWER (disk0s2) / [Startup]: 319.21 GB (158.13 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
              MATSHITADVD-R   UJ-898 
    USB Information:
              Apple Computer, Inc. IR Receiver
              Apple Inc. BRCM2070 Hub
                        Apple Inc. Bluetooth USB Host Controller
              Apple Inc. Apple Internal Keyboard / Trackpad
              Apple Inc. FaceTime HD Camera (Built-in)
    FireWire Information:
    Thunderbolt Information:
              Apple Inc. thunderbolt_bus
    Configuration files:
              /etc/hosts - Count: 1
    Kernel Extensions:
              com.globaldelight.driver.BoomDevice          (1.1 - SDK 10.9)
              net.telestream.driver.TelestreamAudio          (1.0.5 - SDK 10.6)
    Launch Daemons:
              [System] com.adobe.fpsaud.plist 3rd-Party support link
              [System] com.disc-soft.DAEMONTools.PrivilegedHelper.plist 3rd-Party support link
              [System] com.freemacsoft.appcleanerd.plist 3rd-Party support link
              [System] com.google.keystone.daemon.plist 3rd-Party support link
              [System] com.machangout.glims.loader.plist 3rd-Party support link
              [System] com.oracle.java.JavaUpdateHelper.plist 3rd-Party support link
    Launch Agents:
              [System] com.coupons.coupond.plist 3rd-Party support link
              [System] com.google.keystone.agent.plist 3rd-Party support link
              [System] com.machangout.glims.agent.plist 3rd-Party support link
    User Launch Agents:
              [not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
    User Login Items:
              None
    Internet Plug-ins:
              o1dbrowserplugin: Version: 5.2.4.18058 3rd-Party support link
              CouponPrinterPluginMac1.0.0.7: Version: CouponPrinterPluginMac 1.0.0.4 - SDK 10.7 3rd-Party support link
              Default Browser: Version: 537 - SDK 10.9
              AdobePDFViewerNPAPI: Version: 10.1.9 3rd-Party support link
              FlashPlayer-10.6: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
              Silverlight: Version: 5.1.30214.0 - SDK 10.6 3rd-Party support link
              Flash Player: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
              QuickTime Plugin: Version: 7.7.3
              googletalkbrowserplugin: Version: 5.2.4.18058 3rd-Party support link
              iPhotoPhotocast: Version: 7.0 - SDK 10.8
              AdobePDFViewer: Version: 10.1.9 3rd-Party support link
              CouponPrinter-FireFox_v2: Version: 5.0.3 - SDK 10.6 3rd-Party support link
              JavaAppletPlugin: Version: Java 7 Update 51 3rd-Party support link
    Safari Extensions:
              AutoComplete+ Personal: Version: 1.0
              Open in Papers: Version: 1.3
              AutoSMS: Version: 1.0
              Reload Button: Version: 1.2
              Gmail Menu: Version: 1.03
              1-ClickWeather: Version: 1.0
              Add To Amazon Wish List: Version: 1.4
              Keyword Search: Version: 1.2
              Add To Amazon Wish List: Version: 1.8
              Ginger: Version: 0.1.0.34
              GoogleToolBar: Version: 1.9
              Pinterest: Version: 1.0
              We Heart It: Version: 3.2.0
              Instair: Version: 1.2.3
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
              AirPlay: Version: 2.0 - SDK 10.9
              AppleAVBAudio: Version: 203.2 - SDK 10.9
              iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins:
              Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    User iTunes Plug-ins:
              TuneUp Visualizer: Version: 2.2.0 3rd-Party support link
    User Internet Plug-ins:
              npBcsMcTcIO: Version: (null) 3rd-Party support link
    3rd Party Preference Panes:
              MusicManager  3rd-Party support link
              Growl  3rd-Party support link
              Flash Player  3rd-Party support link
    Old Applications:
              /Developer/Applications/Performance Tools
              /Users/[redacted]/Documents/Shrunken Apps/Shrunk Apps/Applications/iWork '09
              /Developer/Applications/Utilities/Bluetooth
              /Developer/Applications/Utilities
              SLLauncher:          Version: 1.0 - SDK 10.5 3rd-Party support link
                        /Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
              /Developer/Applications
              PicsAid:          Version: 1.4, Copyright © 2011 DigiDNA Sarl. All Rights Reserved - SDK 10.5 3rd-Party support link
              /Developer/Applications/Graphics Tools
              Get Backup 2:          Version: 2.5 - SDK 10.5 3rd-Party support link
                        /Users/[redacted]/Back-Up/Shrunk Apps/Applications/Get Backup 2.app
              FacebookVideoCalling:          Version: 1.2.0.157 - SDK 10.5 3rd-Party support link
                        /Users/[redacted]/Library/Application Support/Facebook/video/1.2.0.158/FacebookVideoCalling.app
              iSkysoft Helper Compact:          Version: 2.2.6.4 - SDK 10.5 3rd-Party support link
                        /Users/[redacted]/Library/Application Support/Helper/iSkysoft Helper Compact.app
              /Applications/iWork '09
              OmniWeb:          Version: 5.11.1 - SDK 10.4 3rd-Party support link
                        /Users/[redacted]/Documents/Shrunken Apps/Shrunk Apps/Applications/OmniWeb.app
    Time Machine:
              Skip System Files: NO
              Mobile backups: OFF
              Auto backup: YES
              Volumes being backed up:
                        QWER: Disk size: 297.29 GB Disk used: 150.02 GB
              Destinations:
                        Kristen Passport [Local] (Last used)
                        Total size: 931.36 GB
                        Total number of backups: 22
                        Oldest backup: 2013-01-27 16:52:28 +0000
                        Last backup: 2014-03-11 23:51:24 +0000
                        Size of backup disk: Excellent
                                  Backup size 931.36 GB > (Disk size 297.29 GB X 3)
              Time Machine details may not be accurate.
              All volumes being backed up may not be listed.
    Top Processes by CPU:
                   5%          WindowServer
                   4%          Safari
                   3%          syncdefaultsd
                   2%          hidd
                   1%          EtreCheck
    Top Processes by Memory:
              188 MB          com.apple.IconServicesAgent
              119 MB          mds_stores
              102 MB          com.apple.WebKit.WebContent
              61 MB          Safari
              44 MB          WindowServer
    Virtual Memory Information:
              1.05 GB          Free RAM
              1.48 GB          Active RAM
              502 MB          Inactive RAM
              998 MB          Wired RAM
              332 MB          Page-ins
              0 B          Page-outs

  • New Multi-OS/CPU aware virus broke through virtualbox. For a reason.FYI

    FYI (all)
    Dear sir (RMS @ GNU),
    my apologies. That e-mail concerned the embedding (secretly) of personal information during the make process of certain gnu software but there's a new developent and I'm extremely mad : I have been looking for ways to de-obscurify certain (gnu) Make processes. During my search I found a certain GITHUB repo that provided a way to do that. It was not "AO" but another... In reality it was a virus and/or a magic trigger that broke and destroyed All my systems in a manner of 2 hours or so.
    It's a special case, methods used are not mentioned anywhere on internet. This one is multi-os aware and broke through a running virtualbox installation (I suppose via I/O hooks exploits yet unknown ). Both host and guest gets destroyed, independant of OS!
    from what I have seen:
    - the maker has somehow trojaned the Freedesktop.org desktop-daemon- input dbus helper software to gain and maintain root via init. Virtually everydebian based is thereby vulrenable.
    - the maker has found a new way (unknown to every antivirus software) to gain Admin acces to windows system via lowlevel IO and/or abused "signed drivers" - and mmaps itselfs there to propagate..
    - the virus broke through running virtualbox installations (latest installation, new installations, old VDI's) and they got all destroyed, first guest and hours or days later both host and guest installations.... also new.
    - the virus injects itself on every network IF / download / and propagates on installation (triggered) within the virtualbox installation. This happens on the host too, but hours later.
    - it eventually kills every document on every OS by spawning hundreds of processes to kill documents (overwrite, move, symlink)
    The strange thing about this, is that GNU sources / software like the sourcecode for GLIBC and GCC was left alone! Because of that and the mentioning of GNU on that repo I contacted GNU. On my windows system there was even a special message "Thanks to Freedesktop and embedded Ruby".
    The virus was obviously not meant for worldwide propagation but to target a certain audience (I suppose people like me), it's been engineered beyond belief and I triggered it somehow. In order to clean my system I tried a ISO/USB boot from AVG (linux based.) I booted from that USB and it got infected upon scanning... amazing.!!
    Anyhow.. sorry to have bothered you.
    Regards,
    To microsoft: Windows : is trojaned via virtualbox Usb I/O and/or other lowlevel I/O trickery. Obviously new methods are used, hard to reproduce and I can only mention a few details : virtualbox breakage like this is not yet mentioned anywhere and no admin priviledges are needed to reproduce. this "virus" has no signature known to clamav/kaspersky/mssc/avg/macafee. New exploits are obviously used, unknown and/or used in a similar manner. Microsoft should investigate this on their own.
    To FreeDesktop DBUS daemon: has been abused (and this darn thing is used in many debian based INIT scripts etc, in order to gain and maintain root (or worse). There was a note left on my system "thanks to freedesktop and embedded...": every Linux instance, new or old (2.6 to 3.2xxx was infected immediately). FreeDesktop: I *** your** because similar trickery is mentioned since 2009.
    To certain people at Debian: thanks for not taking me seriously or even understand what you are doing. Clueless.
    To Oracle: Every HOST that mounts an infected VDI, gets infected immediately upon boot. Or the other way around: upon scanning the filesystem. The scanning OS itself gets trojaned (reproduced via multiple USB installations/Gpart ISO, AVG iso) and gets destroyed . Even within virtualbox ..... the ISO grows to hunderds of gigs. Virtually. I suppose it's hooked via USB transport to gain accces over keyboard and mouse. In fact it doent matter what OS is used, the killing process is "universal" because it happens within the hooked kernelspace.
    To reproduce : I cannot give much details and its hard to traceback or reconstuct the order of events but I wanted to look for a way to de-obscurify a certain gnu-make process (in particular a piece of GNU software (for ..keys) from which I suspected to embed privacy information about the user and this software is used on virtually every OS and in many software packages as building block. And I certainly found one. I guess some magic 0xUL that passed my system or action I did -triggered this OS independant chainreaction or "OSkiller" process. I should have suspected this.. well. Even github trickery was (AB)used ~/.git / gitprocesses are used for some reason because every new download got the "make" process treatment instantly. Tricks to use parts of sha1 signatures (actually the gitters identification. Some people are aware of these methods and are abusing this system, not to "watermark" but to pull off this kind of work?
    The result: all my virtual Linux / Freebsd VDI/VMDK installations were completely destroyed within a manner of minutes and later the host (windows7, regular update cycle, well maintained and secured) too. It was hard to traceback and/or/try forensics because the host got infected too -- obviously no way to sandbox. (maybe I'm not clever enough). Mounting from another OS is killing that OS too. Amazing. The reason I wanted to traceback or mount a certain partition was because it contained my work on my research. I had backups (even incremental) of some instances and they all got destroyed too (unaware of the systemhooks that were luring for the magic).
    Reproducable? Yes. But hard to pull off and therefore I suppose this "virus" is not meant to propagate worldwide but targetted at a certain audience. The maker(s) has/have deep profound knowledge of windows internals, virtualbox exploits,, linux exploits, methods not seen by any anti-vir software I got running. It means there's a whole bunch of multi-os exploits, application exploits, not used or mentioned anywhere, bundled in a well prepared trap for anyone who gets the magic. I still have the infected VDI's. cannot tell if they are completely destroyed because I dare not mount it in ANY way. (I tried virtually every way possible!!!!!). Forensics could do some work on the raw material.
    Here's a brief list of software that must have already been trojaned / to kill the running OS's (on host/guest) of a target:
    - "nonfree" linux-firmware. Certain IO/dev (dbus?) userspace layers (linux)
    - linux or windows virtualbox guest addition(s): CERTAIN debian updates (* triggers the killing process). Especially the RE-make of IO kernelmods process caused a chainreaction in one case. The maker(s) did some magic there because one should assume that KERNEL code is well maintained (like Theo.d.r. does :-) )
    - (gnu) remake processes of kernel mods (RT/Pre-emt) -> guest additions. I could only reproduce this a few times because my host got killed.
    - github trickery....
    - techniques: callbacks via IO hooks on both HID and available network devices and injects itself via sockets (because every download was infected)
    - I suppose no known shellcode was used or not recognised. Every virusscanner that I got running got killed and infected upon scan, both windows and linux based, clamav and AVG mssc, macafee, kaspersky etc etc. Even a simple mount gets a host killed. Amazing.
    and all of this must have been "packaged" for a special occasion? Its profoundly layered, multi-disciplined and networked (I guess there are more related triggers to this network) and this OS killer must have been ready or "waiting" for months, none of the exploits I've witnessed are mentioned on internet or have been used on seperate occasions (except for the dbus trickery: there have been rumors but no real actions by ubuntu or debian etc etc). All these multi-cpu/os/software exploits (means transports) events that happened on my systems, both metal and virtual, are not mentioned anywhere or seperately used on other occasions or else someone would have mentioned it? Even the slightest kernel breakage or trojaned kernel in this respect should gained prestige for certain w/b hat hackers. This is beyond belief. The guest/host breakage is amazing, multi-os and the killer does its work profoundly.
    - so oracle can deal with this virtualbox breakage from host to guest and vice versa
    - linus gets his multi-OS io / kernelspace breakage, kills of every mount or gets triggered by even mmapping.
    - microsoft no idea.... no blame this should have been recognised within the security framework, but there's obviously not yet a signature known.
    I don't know if I should call this a virus. It uses virus-like techniques but on so many levels happening at once. I dont think oracle or microsoft or linux / freebsd /solaris is targetted. It looks like a well contained (only propagating on the host/guest, even socks are targetted only at localhost) - trap, the killing process is very persistant and for a reason. If this was used in a network-propagating carrier virus it should raise a Major worldwide alert. I think this unknown network of suddenly revealed exploits are means to immediatly shutdown/completely kill the running system(s) of a certain audience (like me). It's like a network and eventually a killswitch, a "destroyer" which I happened to trigger while I was investigating some things concerning privacy issues (in fact building blocks for signing of public keys). This message should raise some questions.
    And about that github repo. It's not AO.
    Thats all folks.
    0X

    We would really like to debug your problem but the provided information is not sufficient and very hard to parse. A few questions:
    - Which version of VirtualBox are you using?
    - What host systems did you use to test, only Windows 7 or also other systems?
    - Did you try to use an infected .vdi disk with a fresh installation of VirtualBox on a fresh host?
    - Which guest is affected (exact version please)?
    - You report that even your host will be infected (breaking through from a VirtualBox guest to a host). Did you do scan your host for viruses before you started your guest so you can be 100% sure that your host was clean before it was infected by the guest?
    - When scanning the infected system with a Linux-based virus scanner: Did the scan report any problems? If so, which? And did you consider to use a virus scanner on a read-only boot medium? In the latter case it is impossible that the virus scanner gets infected.
    I would appreciate if you could answer these questions, there could be more questions once I have the answers to these. But please, try to be precise and short when answering the questions.

  • Why, all of a sudden, can't I download documents from websites or e-mail attachments when I can do this on Internet Explorer without problems?

    When I try to download a spreadsheet, document, or other item from a website, using either run or save, everything freezes up and no download occurs. Or sometimes the item will download in a nonsense jumble of numbers and letters. The same thing happens when I try to download an e-mail attachment from someone. Thing is, I can do all these things from Internet Explorer without problems. This has only happened within the past couple of months. Before that, I had no problems . What's happening?

    That's right; openbox-session worked.
    Edit: Here's eventually bspwmrc, but there shouldn't be anything wrong.
    #! /bin/sh
    bspc rule -a Steam follow=on
    bspc rule -a Eclipse floating=on
    bspc rule -a virtualbox floating=on
    bspc rule -a pavucontrol floating=on
    bspc rule -a Firefox floating=on
    bspc rule -a xpad floating=on
    bspc config border_width 4
    bspc config window_gap 5
    bspc config split_ratio 0.5
    bspc config borderless_monocle true
    bspc config gapless_monocle true
    bspc config focused_border_color '#8B2DD2'
    bspc config normal_border_color '#000000'
    bspc config presel_border_color '#702000'
    bspc config top_padding 14
    bspc config auto_cancel true
    bspc monitor -d 2 3 15 20 17 22 23 10 7
    Last edited by Ploppz (2014-07-12 17:28:25)

  • Windows 2008 Server License Key not working on VirtualBox

    I have a validated licensed copy of Windows 2008 Server and I need to load it on a Virtual machine (I am running Oracle VirtualBox). When I had the server running on a hardware based server it worked fine. The license key activated and it worked. Now when
    I load it onto the VirtualBox solution it fails. It will take it when I run the manual command but will not show my server as activated. This is for my private use only (internal home LAN) but I would prefer to have the activation be correct since I use this
    setup to help keep fresh on Windows 2008 servers while being on a Linux OS with a VM software loaded.  What can I do to have this server activate correctly under the VirtualBox?
    Thanks,
    Tom

    Hi Tom,
    Base on my experience, after we convert a physical computer system to virtualize environment we need to reactive it, with MAK active method we need keep this vm to connect to
    internet and with KMS method please confirm this vm can communicate with your KMS server.
    The related KB:
    Understanding MAK Activation
    https://technet.microsoft.com/en-us/library/ff793435.aspx
    Volume Activation in Disconnected Environments
    https://technet.microsoft.com/en-us/library/dd981010.aspx
    I’m glad to be of help to you!
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • File Sharing in virtualbox using NAT

    I have Win2K installed as a guest machine  in virtualbox.  I have no problems accessing the Internet using NAT with the NIC set to DHCP.
      Will I be able to access the Arch host (and vice-versa) using NAT networking or will I have to setup bridge-networking?  I know there is a wiki on virtualbox, but it didn't seem to cover this other than giving more detailed instructions on bridge-networking.  At this point I only want to know if file sharing is possible using NAT before spending too much time on it.  If its not possible I may go back to VMware-server which seemed to get broken after the last kernel upgrade. 
    Thanks

    Although you have allowed open access to all users to save files in that directory, it's a pointless excersise as you have no system in place to allow one user to overwrite another users files. There's more to multiuser file access than simply making a place where you can all save files. Files created by each user have a unique user ID attached, and without a Group system in place for your users, OSX will (correctly) deny overwrites. You're going to need to learn about the unix filesystem and the chgrp function, and establish your users as being members of a Group before they can all overwrite each others files. It's much too large a topic to get into here, but a spot of research will sort you out. A word of caution though - filelocking is not a trivial subject and you probably want to consider other options - what happens if someone screws up a project and overwrites it 'behind the back' of another user?

  • How do I install Internet Explorer on my Macbook Pro?

    How do I install Internet Explorer on my Macbook Pro?

    Virtual Box free, Windows 7 Home Premium System Builder SP1 $92.
    IE9 is and can be secure and work just fine and I do prefer it to others, but Firefox lets me work in Apple Community easier is all.
    Safari still bogs down trying to open multiple tabs, isn't multi-thread efficient, isn't memory efficient or well behaved - beyond the advandages of keeping code in memory it is still a memory hog. Open the same 20 tabs in any other browser is the best way I know. I also don't trust Google that much for security, I consider Google tracking and adsense to be a nuisance. Firefox gives some semblance, especially with add-ons, to tracking, cookies, privacy, and blocking content the best.
    Exploring IE
    Tracking Protection IEBlog
    Comparison of VMware Fusion Parallels VirtualBox
    Comparison Fusion and Parallels
    VirtualBox
    Oh, and MacBook Pro?
    MacBook Pro
    MacBook Pro Apple Support
    Or if you want to explore Safari:
    Safari
    Apple - Support - Safari

Maybe you are looking for

  • HT1918 how do you know what computers are authorized to use home share before i delete a computer

    how do you know what computers are authorzed to use an I tune account?

  • Delection flag product

    Hi All Want to delete following data of delection flag active product from apo 1) Batches 2) Planned order / Production order 3) PR /Purchase order 4) Sales order 5) PDS 6) External Procurement relationship 7)Source supply When I checked /NWUF tcode

  • Changing page order?

    I read in a few posts that you can just drag the page to change the order under "view thumbnails". It's not working for me. I'm not exactly sure what I am doing wrong... Can anyone help me out with how to move a page in a different place?

  • Font type of screen field

    Hi experts              I added a new field to the screen but the font type of this field label is different from the font type of other field labels which are created by SAP.please tell me how to change my field label font. Thanks Regards Giri.

  • Universe, Crystal Report and WebI

    hi There i have a WebI report always fails due to transaction error even i didnot use "limit execution time" ( i didnot check that box, so i guess no limits on this option), then i create a CR report with same universe, i have no issue to get this re