Internet over USB

Can I get internet over the usb port on the Airport Express? For example using it to connect to a TiVo?

Sorry, but no. The USB port on the AirPort Express Base Station (AX) is only for connecting a USB printer or a Keyspan Express Remote ... or a USB hub for the 802.11n version of the AX.

Similar Messages

Can I share internet with my powerbook g3 using iphone over usb

Is it possible to connect an old powerbook G3 (running OS10.4.11) to the internet using in iPhone over USB? The USB port currently does not show up as an option in the network preferences.

Ralph-
Ralph Landry1 wrote:
No, the iOS devices are not capable of using USB or networking in that way.

Internet through USB cable connection

Dear Sir;
How do I connect my phone to the internet through USB cable connection?
i would like if i can connect to the internet through the USB cable, not through W-LAN, so if i can, how , which software i need?
Best Regards

you ahve to install Nokia PC suite then you will be able to connect to internet via your phone over the USB cable.

TS1286 Cannot connect to internet with USB

I am a new user of Ipod touch 5th gen 32 gig I cannot connect to internet with usb?

Hi bikernblondie,
When you say that you're trying to connect to the internet with USB, do you mean that you're trying to connect your iPod to the internet so that you can surf the internet with a browser on your iPod, or that you're trying to connect your iPod to your computer so that you can sync it with iTunes and bring over songs, movies, apps, etc.?
- O.C.

Use PC internet via USB cable on n97mini

How can I use PC internet on my s60v5 device, this was possible on s60v2 by using custom COM ports and a software. Is it possible to achieve this on s60v5?

Ok.. Reverse tethering over USB .
May want to check your Windows sharing options/settings and the network adaptors settings
Also make sure all the drivers are properly installed and USB debugging in turned on.
The issue is Windows related. Maybe this VIDEO will help .
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"!
Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

VPN - can't access internet over VPN

Hi,
I have an issue with VPN.
For my work I need to be able to log into my office network remotely and then access remote desktop connection from within my work network.
This won't work unless I am accessing the internet from inside the VPN.
I have got this working on a PC, just had to select "Use default gateway on remote network" and now when I access the VPN on a windows laptop I am accessing the internet over the VPN.
When I connect to the VPN on the Mac I can access the network, email server, file servers etc, but can not access the internet through the VPN.
I have tried:
- changing the service order
- ticking and unpicking the send all traffic over VPN setting
I can get to the point where I can access my work network over the VPN while also accessing the internet over my wifi but cannot get it so I can access the internet over the VPN connection. It is a PPTP VPN.
Does anyone know how I get my Mac to use the default gateway on the remote network?

If this server is behind a (NAT-) router you need to turn on "ipforwarding only" in Server Admin NAT configuration otherwise the server wont route packets beyond it's subnet.

I am having one application which i am going to install on my ipad and i am having one external device having USB interface. I want to have communication in between my device and ipad over USB/BT. is it possible

My external device is having male USB connector. The cable available in market are having can be plugged to the device having female connector.I will need converter in between as my device is having male connector. Can i get such cable? If yes can i establish communication in between my app and device over these cables.I am not passing any audio/video data or photos.I am sending data frames. My device is having firmware and it sends data frames in firmware understandable format. Let me know can i have two way communication in between over USB/BT?
Right now i am connecting my device with host PC and i want to replace my host PC with ipad.

Thanks....
will it be possible to establish communication in between my device and app. Because camera conection kit only transfers photos and videos and my device doesnt have any audio/video data.
If yes, should i add photo header to my frames and will send as corrupted photo file or what needs to implement so that i can have sound communication in between.

IMac G5 isight Can No longer connect to internet over Airport

I have an iMac G5 that has been working fine on my Airport Extreme wireless network for 3 years. Suddenly, I can no longer access the internet over my Airport connection. The computer is on my local Airport network wirelessly (I can access it from my laptop and share files). I can connect to the internet from 4 other computers connected to the same wireless Airport network (2 MacBook Pro's, 1 Powermac G4). In addition, if I connect my iMac to my laptop via a twisted pair ethernet cable and turn on internet sharing on my laptop, my iMac can connect to the internet. All systems are running 10.5.5 and no firewalls in place. I checked my internet preferences and they have not been changed from what they were before when it was working. DOES ANYONE HAVE ANY IDEA WHY SUDDENLY IT STOPPED CONNECTING TO THE INTERNET OVER MY WIRELESS AIRPORT CONNECTION?

I have just experienced the same situation. Everything was working fine and now I can't connect to my airport from my macbook pro. I also have an iMac G5 working perfectly well on the same airport.
Could it be a latest update that has caused the problem?

Syncing hosted exchange calendar to iPod Touch over USB won't update-

Wanted to post some helpful advice for anyone that may experience this issue.
If you use a hosted exchange service, and are stuck syncing your calendars and contacts to an ipod touch or iphone over USB, realize that iTunes will only sync the default calendars and contacts over USB, not shared folders. Itunes will give you the option to designate which calendar syncs, but the names in iTunes won't match what is named in outlook.
Have a difficult client who suffers from a mixture of tech hoarding, non-linear thinking, unwillingness to change behavior, tech anxiety, and ego. So there has been a lot of money and time spent to get him tools that help organize his life, and allow me to schedule things for him. I have him on a hosted exchange account so that I can have access to his most up to date appointments and contacts when he travels internationally (He won't leave AOL because he can save emails directly as Word files). His Palm treo (which was only being used as a PDA) was beginning to fail, so I recommended an iPod touch as a temporary, low-cost PDA alternative. He travels internationally in 6-8 month chunks, since it didn't make sense to commit to a superphone. He did it under condition that it would sync over USB, since he is in areas without wifi very often. I checked it on my iphone (since I'm synced to his exchange account), and it worked. So I gave the go ahead.
After some issues with changing out his computers while in Europe, he contacts me with issues that his calendar and contact options were not updating to the most recent information in outlook after syncing with USB. After a support call, I was told to restore the phone, so that everything was erased and would be reloaded with outlook info. After we did that, my client informed me that contacts were updating, but the calendar was missing, except for two events that I had accidently added to it from my iPhone. I called support, who took the issue to tier 2, and was outright told not to talk to me and referred me to my hosted exchange company. I mentioned that they would be unable to help me with why iTunes wasn't updating a calendar in Outlook. He apologized but said that Tier 2 wouldn't take the call, and because it was exchange they wouldn't help. This was with my client on the line in a skype conference, who became maddeningly upset, as he would need to find another PDA while in Europe. Since, my client has sworn off Apple, which I was beginning to lean him towards, due to it's robust OS and backup capabilities, as well as simplicity.
But that's neither here nor there. I noticed that the two events that I had accidently added were on the default outlook calendar, named (oddly enough) "Calendar". Due to issues with me when I setup exchange when we first got it, I had to tell him to use a shared calendar called "Calendar-New" so that him and I could view and edit his appointments from different machines. I was connected to my clients computer over VNC, so I saw that under the info tab in iTunes, where I had checked "Sync with outlook" that there was a second option to sync only certain calendars, and three were listed, ""Calendar", "Calendar-", and "Calendar-1". I asked the tier 1 rep to check to see what these meant, I may be able to redirect iTunes to the right calendar. He was unwilling to, as Tier 2 had yelled at him.
With that, we hung up, and, once I confirmed that his changes to Calendar could be seen on my end, and changes I made could be seen on his end, and that these events showed up on the ipod after he synced it, I realized that iTunes defaults to the default calendar in outlook. Yay!. I went ahead and dragged and dropped all of the events from Calendar-New to Calendar, and now the problem is fixed.
I really wish someone at apple support would have been willing to at least walk through this with me, or at least looked into how the sync works, Ashley in tier 2, shame on you for hanging up on my tier 1 rep! You lost a customer who buys a brand new computer every year. Reminds me of this story
http://www.crm-daily.com/story.xhtml?story_id=74372

Hello Snagglebits2
I am an Solutions Engineer for a hosted exchange provider, and that is some good information.
I have not tested this out, but i will. I do remember when i had my ipod touch, that it would sync perfectly over WiFi, but i do not know if i ever tested this by USB.
You should also make sure your customer is on a hosted exchange service that uses Akami.

Booting from an external drive over usb

Hey, has anyone else had any problems booting from an external? I have an external lacie drive that I keep a clone backup on (using superduper) and usually have it connected with firewire400. I know it works because i've accidently booted using it before, but recently the firewire port on it died so i've been using usb instead.
Now the problem, holding option on my macbook starting, I get no options to choose from. If i have the mac osx dvd in, it pops up so I know it's not a problem with my macbook. It is possible to boot from usb correct? Everything i've read has said it's possible... I'm not sure why my external drive isn't coming up. I know it works over usb because I've used it alot since the firewire port died on it. I checked in the disk utility and it does say it's bootable, and afterall it's cloned using superduper like i said before...
I have 2 partitions on the drive, is that a problem? It never was before, I've booted off it many times before using firewire though. Can someone help me out here? Very annoying as I'm replacing the HD in my macbook and neeeeeeed to get on my external.
When I asked the guy at the genius bar awhile ago he just said it was probably a problem because my old internal HD died and he said sometimes it causes the macbook to not even be able to get as far as the point to boot from another source. Well now I have a new working drive in it, so I know that's not the problem. It just doesn't show up to boot from anymore, ugh.

Sounds like your clone isn't bootable. Have you tried the following:
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger, and 4.1 for Leopard) and/or TechTool Pro (4.6.1 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

Subsequent device(speaker) detection over USB, results in new interfaces in the list(System Preferences- Network)

Hi,
There is a problem when device(speaker) is unplugged and plugged in Mac OS version 10.7.5
Every time unplug and plug the device over USB and re-plug, new interface is added in the list System Preferences->Network.
For example, if the device interface name is device20, when the device is plugged first time, system shows "device20" in the detected device list i..e in System Preferences->Network. But next time when unplugged and plug again the device name gets changed(device number gets incremented), i.e. "device21" will be displayed. So if repeatedly unplugged and plugged, the device number gets incremented everytime and added to the list as device22, device23,....etc. The list will grow with many entries if we repeatedly unplug and plug the device.
I am not sure why the system is behaving so. You help/support will be highly appreciated.
Thanks in advance.
- Tejonath

Hi,
There is a problem when device(speaker) is unplugged and plugged in Mac OS version 10.7.5
Every time unplug and plug the device over USB and re-plug, new interface is added in the list System Preferences->Network.
For example, if the device interface name is device20, when the device is plugged first time, system shows "device20" in the detected device list i..e in System Preferences->Network. But next time when unplugged and plug again the device name gets changed(device number gets incremented), i.e. "device21" will be displayed. So if repeatedly unplugged and plugged, the device number gets incremented everytime and added to the list as device22, device23,....etc. The list will grow with many entries if we repeatedly unplug and plug the device.
I am not sure why the system is behaving so. You help/support will be highly appreciated.
Thanks in advance.
- Tejonath

My 2012 macbook air won't recognise my orange internet everywhere usb modem

my 2012 macbook air will not recognise my orange internet everywhere usb modem

Used 'Assist Me' as suggested - awsesome. Here is what was wrong with my network. Had same problem - found out I had another router plugged in but not active. Turns out it was still xmitting a signal and confusing the macbook. Go figure. Once it was powered off - connection was perfect. Hope this helps.

Does Logic support Audio Interface and MIDI simultaneously over USB?

Hi -
I'm new to this so please bear with me :-). I have a MacBook running Logic. Also have a MIDI controller hooked up via USB.
I also have a USB Mixer that I'd like to hookup to the Mac's audio output. Currently, I have the MacBook's headphone output going into the mixer. I'd love to get the cleaner sound afforded by the USB connection. Is this possible while keeping the MIDI connection over USB?

Thanks, Fox. You're right - I just tried it out and it worked out very well (although I'm getting I high-pitched noise through my monitor speakers only when Logic is running. The noise stops when I exit out of Logic.)
I couldn't get myself to believe that the Mac/Logic could keep the USB data straight - MIDI on one, and audio on the other, but sure enough, it works just fine. :-)
Thanks!

How to configure Internet over BT?

Hi,
I have bought a SonyEricsson m600i, and I'm trying have internet over bluetooth on my phone with a EP-2101\A1 (This comes with Toshiba 3.00 driver, I downloaded 4.00 driver - for XP SP2).
I don't know if anyone has the same setup of phone AND bt stack...
I have been trying almost every setting to make them connected, but I think, EP-2101 needs a NEW driver.
Please have a look at this picture: I can make COM connection, but I can't make a NETWORK connection (DISCONNECTED BT on the picture!!)between my things:
http://wolf.miki.hu/status.jpg
Does anyone have any idea how to establish NETWORK connection between my SE m600 and my EP2101\A1 BT?

Hello
If the paring between your PC and mobile phone is successfully you must add your mobile phone as new modem. This option you can find under Phone and modem options > Modems tab you can find it under Control Panel.
After that you must create new dial up connection and as modem choose your BT mobile phone. With right number you will be able to establish the connection and use it for Internet.
I have done this on this way for a long, long time. I hope that i didnt write something wrong. Please let me know if you will have success!
Good luck!!!

It is possible to charge an iPad3 over USB and transmit data over USB at the same time?

Hello,
it is possible to charge an iPad3 over USB and transmit data over USB at the same time?
If yes, how?
Thanks
Best regards

OK!?
That is right that the USB data oins are not connected to +5V pin.
But i found a description for a self built power supply for iPad.
http://timothyb.net/DIY_iPad_2_USB_Charger.html
and
https://www.mikrocontroller.net/topic/262610?goto=2726627#2726627
The description say: data pin D- need a voltage level of 2V and D+ 2,857V
when the data pins have this special voltage levels and VCC has +5V only then the iPad is charging.
The voltage "D+/D- coding" is the key for the iPad to charge.
OK now back to my problem.
The regular USB data pin voltage level is 0,3 - 3.,0 voltage. When the iPad is charging the data pins have this special voltage level. Now i try to transmit data over the usb data pins with the. Normaly the USB port transmit the data with a voltage level of max. 3V.
And here my problem. The higher voltage level at the data pins cares therefor that the iPad stop the charging.
Is that correct?

Internet over USB

Similar Messages

Maybe you are looking for