Internet pages state I need to update my web browser, but I have updated my software multiple times.  Any suggestions?

I consistently receive notices on certain webpages (LA Times, NY Times) that I need to update my web browser to see the entire website.  However, I have updated my software multiple times recently as a result of the messages.  I have Mac OSX 10.6.8 currently.  Can someone provide any guidance? 

Please note the version of your computer's OS X now installed and see if
that version is (or not) able to run the latest browsers available now...
http://helpx.adobe.com/flash-player.html
The minimum requirements usually are posted along with the builder site
in a link other than the download one.
See if the Adobe Flash Player help pages can identify whatever Flash may
be installed already; and before installing another, usually the older one
has to be removed. Adobe has an uninstaller for that. See there are two
links into Adobe Help for Flash player. The second one goes further to
try & find an archived alternative to the latest Flash player, if needed.
http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-mac.ht ml
PS: was the notice to upgrade browser, a pop-up window over the web page you
were looking at? Could be some adware, or other malware item is in your Mac.
I do not see those kinds of prompts to upgrade anything in my Mac, and
mine run an OS X older than your Snow Leopard 10.6.8. Visiting the same sites.
Good luck & happy computing!
edited 3x

Similar Messages

  • I cannot open iCloud documents on my MAC I went to preferences etc and it did not give me access. My error says I need an updated version of numbers but I have the latest version

    Mac OSX 10.4
    Processor 3.06
    Numbers 2.3 (554)
    I cannot open iCloud documents on my MAC I went to preferences etc and it did not give me access. My error says I need an updated version of numbers but I have the latest version

    You cannot access iCloud on a Mac running Mac OSX 10.4.  Are you sure, the system version is correct?
    If you are running iWork '09 (iWork 09 9.0.1) on your Mac with Numbers 2.3, you must at least have MacOS X 10.5.6 installed.
    if you want iCloud support for iOS apps, you need the iWork 9.3 update,see:  About the iWork 9.3 Update
    And this update requires OS X Lion v10.7.4
    Is your iMac compatible with Lion or later?

  • Every time I open iPhoto, the program freezes, showing me the spinning rainbow of death.  I always need to perform a Force Quit.  I have updated my software, but that did not help.

    Every time I open iPhoto, the program freezes, showing me the spinning rainbow of death.  I always need to perform a Force Quit.  I have updated my software, but that did not help.

    tullch24
    Try these in order - from best option on down...
    1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library (Right Click -> Show Package Contents) allowing it to overwrite the damaged file.
    2. Download <a href="http://www.fatcatsoftware.com/iplm/"><b><u>iPhoto Library Manager</b></u></a> and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
    3. If neither of these work then you'll need to create and populate a new library.
    To create and populate a new *iPhoto 08* library:
    Note this will give you a working library with the same Events and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
    In the iPhoto Preferences -> Events Uncheck the box at 'Imported Items from the Finder'
    Move the iPhoto Library to the desktop
    Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
    Go into the iPhoto Library (Right Click -> Show Package Contents) on your desktop and find the Originals folder. From the Originals folder drag the individual Event Folders to the iPhoto Window and it will recreate them in the new library.
    When you're sure all is well you can delete the iPhoto Library on your desktop.
    In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption. 

  • How do I activate iMessage when it tells me that I need to check my network connection but I have full internet connection?

    How do I activate iMessage when it tells me that I need to check my network connection but I have full internet connection?

    iOS: Troubleshooting FaceTime and iMessage activation                           
    FaceTime, Game Center, Messages: Troubleshooting sign in issues

  • I need an Ipad app web browser that will emulate internet explorer as my MLS real estate system only uses internet explorer.  Why is Atomic full version not available in the app store  is there another browser that will do this

    I need an iPad app web browser that will emulate internet explorer as my MLS real estate system uses only internet explorer.  Why does Atomic no longer sell the full verison.  What web browser can I use?

    Probably none. It's very possible that the reason the MLS required Internet Explorer is that they use technologies (such as Active-X) that are proprietary to Microsoft and so would not be available from the iPad even if a browser will report itself as being Internet Explorer.
    You can try iCab Mobile, though, and see if it will work for you:
    http://itunes.apple.com/us/app/icab-mobile-web-browser/id308111628?mt=8
    It has the ability to identify itself as other browsers, so if the site is only blocking other browsers and not depending on IE's technology, iCab might work. There could be problems, though, even if the site lets you in.
    Hope this helps.

  • HT4484 I need to purchase an Iphoto book. I have updated my new address as the USA, but when I order the book it still lists the price in Pounds and has my old UK address listed. How do I change it to USA Dollars and my USA address? Anyone know

    I need to purchase an Iphoto book. I have updated my new address as the USA, but when I order the book it still lists the price in Pounds and has my old UK address listed. How do I change it to USA Dollars and my USA address? Anyone know

    You are on the UK Store. Scroll to bottom right, click on the USA flag to switch to the American store. Though you'll have to set up an account there too.

  • Since Yosemite update, we cannot open Minecraft.  Keep getting message that we need to install the legacy SE 6 runtime. This has been unsuccessful. Any suggestions? A nine year old boy will be grateful! Thanks!

    Since Yosemite update, we cannot open Minecraft. Keep getting message that we need to install the legacy SE 6 runtime. This does not work. Any suggestions? A nine year old boy will be grateful as will his mother! Thanks!

    Is this the one you're installing?
    Java for OS X 2014-001

  • How do I update my web browser on my Tungsten C

    How do I update my web browser on my tungsten C? (What update to I use and where do I get it?) Images are not displayed properly on web pages and no popups are allowed. I am using the Vista palm 6.2 OS because I use Docs to Go. Chat support is no longer available for my device.

    I still feel I can succeed with opera mini somehow--if someone can please instruct me on installing it. I renamed the .jar file to .zip extension and extracted it. I got about 9 or 13 files (sorry I'm not sure) with the extraction and a manifest file folder. I tried to hotsync the files to the card but it failed because the palm desktop 6.2 said there was no application to read the files on the Tungsten C. What do I do with the manifest file folder (that was not in the hotsync list)?
         Do I have to use the .jad file and if I do, please explain how to use it or install it. Does the .jad file install on the computer or the handheld? Can you sense my intuition at play here (baffled). As I remember, when I tried to hotsync the .jad and .jar files to the handheld's card, it failed. I must have done something wrong and I don't know what that is. Also I established a connection to the internet with the built in browser and went to the address m.opera.com but I got a message that the file type was not supported and I couldn't install it that way. Can you clear up my mind Wyrenut? I'm a schizophrenic, so we have a connection to your username.

  • I have a problem with Safari in IOS 8 on my iPad 3. The bookmarks take up a third of the screen and I can't seem to make the bookmarks disappear until I need them. The useful part of the screen is therefore very small. Any suggestions gratefully appr

    I have a problem with Safari in IOS 8 on my iPad 3. The bookmarks take up a third of the screen and I can't seem to make the bookmarks disappear until I need them. The useful part of the screen is therefore very small. Any suggestions gratefully appreciated.

    OK, it now sort of works. A couple of problems here:
    After updating IOS, Safari iCloud was "automatically" switched off
    Switching it on had no effect
    resetting my iPad automatically switched off safari iCloud again
    after switching it back on, it said "turning off safari data"
    switched it off and on again, now it said : "turning on safari data" and the sync worked
    On IOS 7 no problems
    The bookmarks not being displayed was because after pressing the book icon, it defaulted to showing the history and I had to press "Back" to get to the other options

  • If I'm in Lightroom 5, and try to Edit in Photoshop CS6, I always get the following message: "This version of Lightroom may require the Photoshop Camera Raw plug-in version 8.6 for full compatibility." But I have updated to 8.6 and have no remaining updat

    If I'm in LIghtroom 5, and try to Edit in Photoshop CS6, I always get the following message: "This version of Lightroom may require the Photoshop Camera Raw plug-in version 8.6 for full compatibility." But I have updated to 8.6 and have no remaining updates. How can I fix this?
    If I click "Open Anyway" or "Render using Lightroom", I get the following message:
    "Adobe Photoshop CS6 cannot be opened because of a problem.
    Check with the developer to make sure Adobe Photoshop CS6 works with this version of OS X. You may need to reinstall the application. Be sure to install any available updates for the application and OS X."
    Please tell me what to do so I can edit from Lightroom to Photoshop.

    In Photoshop, if you choose Help - About Plug-in... - Camera Raw, does it say 8.6?
    Seems to me there was some hiccup they found in the update process, which prompted this:
    Camera Raw updates cannot be applied
    I honestly don't know if the problem could apply to 8.6 as well, which is why I asked you to check to make very sure you really got it.
    -Noel

  • TS1702 i have an iphone 3gs and i can't load facebook because it says i need os 4.3 or higher but i have 4.2.1

    i have an iphone 3gs and i can't load facebook because it says i need os 4.3 or higher but i have 4.2.1

    If you're using an iPhone 3G, you can't use the current version of that application.
    If you're using an iPhone 3GS, connect it to iTunes on a computer and update it.
    (70098)

  • Adobe digital does not recognise my Kobo e-reader following update.  Tried factory reset of Kobo and re-installing adobe.  Any suggestions please?

    Adobe digital does not recognise my Kobo e-reader following update.  Tried factory reset of Kobo and re-installing Adobe.  Any suggestions please?

    The lack of response is deafening. Im guessing then that Firefoix has serious issues then?..well it'll be there loss if more, like me, opt for Internet Explorer and Google Chrome (both these browsers work fine with the latest Flash Player installed)

  • I have updated my ipod touch but i have to update iphone and ipad 1 and ipad2 . How can I save the udated software in order to avoid teh time for downloading it again each time

    I have updated my ipod touch but i have to update iphone and ipad 1 and ipad2 . How can I save the udated software in order to avoid teh time for downloading it again each time

    Even though the downloads are for the same iOS version number, they are different downloads and you can't use an iPod iOS update to update an iPhone or iPad etc. The iPad 1 and iPad 2 are also different downloads. So you will need to download different updates for your iPod Touch, iPhone, iPad 1 and the iPad 2.

  • Hello i have a problem with onfocus function on ipad. i am trying to bring my cursor on a text box on a button click. It works fine with safari web browser but not on ipad. Need a solution.

    Hello i have a problem with onfocus function on ipad. I am trying to bring my cursor on a text box on a button click. It works fine with safari web browser but not on ipad. Need a solution.

    I don't think that a software update from Apple will solve the issues that you are having. You have a rogue installation. After you posted I have just done the following:
    Disk Utility can verify  my partitioned Volume (including my boot disk) AND REPAIR the non-boot disks on the same Volume without a glitch. It repairs the non-boot disks containing data smoothly.
    I have used Mail to send some mails from some Yahoo and Hotmail accounts to my Thunderbird client containing GMail accounts - absolutely normal.
    I have iLife '09 but my iMovie '09 and iPhoto '09 open in a jiffy and I see no issues here. I have 6GB RAM (Maximum) on an early 2008 Macbook Pro with a 750GB hard drive partitioned with 120GB reserved for the Boot Drive.
    I am sorry that I cannot help further but I am sure there must be a way to reinstall the software without having to revert to restoring your ML backup. I have two clones and if you have such I would attempt to do that through that rather than through Time Machine - that is of course if you have a cloned drive.
    Good luck!

  • Each time I open Firefox, I get a popup window that says "It is strongly recommended that you apply this update for Firefox as soon as possible." But I have updated Firefox.

    But I have updated Firefox. And if I tell it to do the update, it runs and runs and runs but nothing ever happens. It has a 'view more information about this update' link but the link does not work.

    According to your user agent string you are not using the latest version of Firefox. It shows you have version 4.0, the latest version is 4.0.1
    In the Help menu select "About Firefox", this should check for updates and then let you install the latest version.
    If that does not work, try downloading the latest version from http://www.mozilla.com/ then installing it over your current version.

Maybe you are looking for

  • HT5682 April 22, just installed the latest update to fix the Java problem, it does not work.

    About a week ago I installed a MAC update. I discovered that I was unable to play POGO games. I know that is not up there with all other uses of MAC... let's get back on track here. I have uninstalled and reinstalled, and reset preferences at least 6

  • How to save form data as XML using Reader XI

    Dear all, I have designed a form using live cycle designer 9 and activated the form extensions using Acrobat X Pro. The form includes an email send button. Our clients uses the Reader X and XI. Using Reader X the pressing of the button will open a di

  • I bought a video and it says i have no videos to watch on my laptop

    hi i bought some videos from i tunes and it was from i tunes i logg on throught my computer and it says i have no videos but when i logg on with my phone it says there still on my account i wanna watch it through my computer thou how can i fix this

  • Defining several paths and finding the shortest route

    Ok, I need to write a program that is being used in the logistics department of a car company. I was given: - A database that contains information of parts - A map that shows the hall where the parts are being installed Purpose of application: - The

  • How can I select count/sum/avg by sliding window ???

    Hi, Can you help me somebody? For example I have table with DateTime field. And now, I want to find which 1 hour interval contains maximum of records. Resolution is 1 minute. This mean that there is 1380 intervals in one day (00:00-01:00, 00:01-01:01