Internet problems with an RV-082 Router and Swann DVR connected.
I have a problem from the twilight zone. When my Swann DVR (CONVR-B163MP) is NOT connected I can access the internet without any problems. When the Swann DVR is connected, I lose access to Google and secure "Log-in" webpages. It is as if there is a firewall blocking them. I can access most normal websites without any problems. Once the problem occurs, I need to reboot the router in order to gain clear access again. Just unplugging the DVR will not fix it.
I have a resolution by connecting an older router directly to the WAN, then linking that router to the Cisco RV-082. I have access controlled by MAC codes and took off the DVR to prevent it from getting access to the Cisco RV-082. The DVR is connected to the older router to get to the internet.
It is just a strange problem.
The Swann DVR is working through the internet to provide a live video feed to my phone.
If anyone knows an answer I would be glad to hear it.
JLW
TelephoneGuru.net is the number one service provide for new and used phone systems, telecoms, voice & data cabling, fiber optics, system repairing, etc. in whole of Dallas and Tarrant County Cities.
Similar Messages
-
Internet problem with New Airport Extreme base and new Macbook Pro
So I bought a Airport Extreme base station with my new Macbook pro.
My desktop system uses a DSL modem which is connected to my computer via an ethernet cable. It works flawless. I can also unhook the hard ethernet connection from the desktop and connect it to the Macbook Pro with no problems.
I then connected the ethernet cable from the DSL router to the WAN port on the Airport Base.
I have no problem gettiing the Macbook pro to set itself up on the Airport Network. I can NOT, though, access the internet. I even tried to type in the IP address for the DSL modem while connected to Airport base and can not connect to modem. Does anyone have any advice? Is there a bridging function in the Airport Base that has to be activated?
Another question. If I replace my current DSL Router with a wireless router, do I even need the airport base if all I want to do it connect to the internet with the laptop?
Thanks,
DannyI have no problem gettiing the Macbook pro to set itself up on the Airport Network. I can NOT, though, access the internet. I even tried to type in the IP address for the DSL modem while connected to Airport base and can not connect to modem. Does anyone have any advice? Is there a bridging function in the Airport Base that has to be activated?
Make sure you perform a complete power recycle when switching network components.
Modem/Router Power ReCycling
- Power-off the DSL modem & AEBS. (Wait at least 30 minutes. If possible, leave the modem off overnight.)
- Power-on the DSL modem; Wait at least 30 minutes.
- Power-on the AEBS; Wait at least 5 minutes.
If that doesn't resolve the problem, and your DSL ISP requires PPPoE for connectivity, you will need to set that up on your AirPort Extreme Base Station (AEBS) as follows:
Connect your computer directly (using an Ethernet cable) to the LAN port of the AEBS, and then, using the AirPort Admin Utility, check these settings:
Internet tab
- Connect Using: PPP over Ethernet (PPPoE)
- Account Name: <ISP account name>
- Change password: <ISP password>
- Always stay connected (checked)
- WAN Ethernet Port: Automatic
Another question. If I replace my current DSL Router with a wireless router, do I even need the airport base if all I want to do it connect to the internet with the laptop?
No, the AEBS will no longer be required. -
Internet Problem with Time Capsule (Wi-Fi) and AT&T U-verse Motorola NVG589 (Bridge Mode)
I'm having a problem with my Internet connection. For some unknown reason it keeps cutting out every 5 min for about 5 seconds. The wi-fi signal doesn't drop or anything like that, just the internet connection stops working for a little bit and then its fine again (pages don't load, etc).
Here is my current set-up:
1. AT&T Motorola NVG589 - set to bridge mode as per instructions here http://www.dslreports.com/faq/17734 (followed instructions step by step)
2. Apple Time Capsule (latest model 2TB)
3. Motorola is connected to the Time Capsule through an ethernet cable.
I tried contacting AT&T and they just sent me a new Motorola router, I installed it, put it in bridge mode and still the same thing is happening.
I am thinking maybe there is some problem in settings or something. Airport Utility is showing everything in "green", no problems there.
Please let me know if anyone can help.Ok, here is an update on how I decided to deal with the problem. I will include all of my troubleshooting step by step for easy reference.
1. At first I put the NVG589 into Bridge Mode and used the TC as the main wireless router. This didn't work as my connection kept dropping for no apparent reason.
2. Second, I tried to put the Time Capsule in Bridge Mode and connect it directly to NVG589. This didn't work as my connection would still lag out for 5 seconds about every 5 minutes.
3. Third, I bought an ASUS RT-AC87U Wireless AC2400 Dual-band Gigabit Router to try and substitute the TC in previous steps and see if it helps. Same problem persisted when I put the NVG589 into Bridge Mode and RT-AC87U as the main router as well as RT-AC87U into bridge mode and NVG589 as the main router. The problem was exactly the same as when I tried using TC initially so my conclusion was this is NVG589's fault of being not compatible with other wireless routers.
4. I looked around everywhere and came up with the only feasible solution possible (for me at least):
Currently I use NVG589 as my main wireless router. I works pretty well and even though it doesn't have the specs of TC or the ASUS router my WI-FI connection is pretty fast and stable. In order to have Time Machine wireless backups, I purchased a Western Digital My Cloud Drive that is connected directly to the NVG589. Everything seems to sync and work well together.
I know this is not the ideal solution most people are looking for. But it works for me. Patiently waiting for AT&T to start offering NVG599 (http://www.dslreports.com/forum/r28967809-NEW-U-verse-Gateway-Motorola-NVG599-WI RELESS-AC-AC1600) in my area. Once I get my hands on it will report back on how it will react to all the steps above and hopefully work well with Time Capsule.
Shoot me any questions you might have. Hope this was helpful for some of you. -
Problem with cisco series 800 router and SMTP
Hello,
we bought a 877 cisco router and have some problem with SMTP.
I try to read all forum and KB about but do not find any solution.
the problem is that when i try to send any email from client (windows mail) i receive a error 533: you need to supply the correct username and password.
when trying throught hmailserver i receive an email "undeliverable" with this error in body:
Error Type: SMTP
Remote server (62.149.128.202) issued an error.
hMailServer sent: EHLO Globalnet
Remote server replied: 502 unimplemented (#5.5.1)
receving email work correctly.
i'm already using smtp auth, and with my old router everything work fine.
so i beleive is a config problem, maybe with ESMTP (ehlo)?.
i attach my config:Dear sirs
Thank you for answer so quickly
I download this document from Cisco âConfiguring the (Remote) Common Application Programming Interface for Cisco 800 Series Routerâ.
I have a Lan with Asterisk IP-PBX , the Cisco router have a BRI to public exchange (ISDN) , the router act like a DCP (ISDN- Device Control Protocol) server and listen (DCP messages) in 2578 port.
I need o know the contents of the TCP frame that carry (ISDN-TCP, the DCP messages) to put a SIP client to talk with PSTN/ISDN using the router. I want to write a software module in Asterisk that translate SIP in (ISDN-DCP) to connect the SIP Phones to the PSTN/ISDN using the BRI ports of the Cisco router. I need to now the contents of this message to dialogue with RCAPI server of the router.
If forum is the right place perhaps to put this, Could you give me a better place, a mail or other forum to receive the speciation of (ISDN-DCP)
thank you
With kinds Regards
João Pereira Rosa -
I have a problem with Safari: when it opens and I go on google, it opens a page that says: please update internet explorer!
What should I do?It's a scam. Have a look at this thread:
https://discussions.apple.com/thread/6058094?tstart=0 -
i have problem with my wifi in 4 S, i cant connect to any wifi itried resetting network setting and reset all setting but the result was the same, its only keeps searching for wifi and cant find any, itried to use OTHER but also didnt work.please help me???
If Join was on then your home wi-fi must be set to Non-Broadcast. If you did not set this up (maybe your provider did) then you will need to find the Network Name they used, and any password they used. The SSID is Security Set ID and to see more try http://en.wikipedia.org/wiki/SSID . Basically it is the name used to identify your router/network. A lot of times the installer will leave it set as LinkSys, or Broadcom or whatever the manufacturer set it as for default. Your best bet is to get whoever installed it to walk you through how they set it up, giving you id's and passwords so you can get in. HOWEVER, if you are not comfortable with this (if you set security wrong, etc.) you would be well ahead of the game to hire a local computer tech (networking) to get this working for you. You can also contact the vendor of your router and get help (if it is still in warranty), or at least get copies of the manuals as pdf files. Sorry I can't give you more help, I hope this gives you an idea where to go from here to find more.
-
Performance Problems with MS IE 6.0 and EP 7.0 (2004s)
Hello,
we have a problem with ie 6.0 webbrowser and EP 7.0 (2004s). When we open for example the theme editor in the ep-system-administration site we must wait with MS ie 6.0 webbrowser ~ 18s for the site opening. With firefox 2.0 we can open the theme editor with ~ 1s.
Have/Had anybody the same problem? - Or is this a knowing problem with ie 6.0.
We used for the network analyse the tool: httpwatch 3.2. We can see, that the ie 6.0 must wait into the all-time of 18sec. 13sec for opening the site: emptyhover.html.
- Thanks in advance for a tip !
Best Regards,
RalfHello Ameya and hello Shao,
we use the version SP12 NW 2004s. We have the this problems with a base application of portal: theme editor.
We can see in the httpWatch 3.2 analysis tool, that the ie 6.0 load a much of cache files from the client webbrowser. Could it be this problem? - I red in this forum problems with the webbrowser-parameter: "Empty Temporary Internet Files folder when browser is closed"
Thank you for your helping.
Best Regards,
Ralf -
I recently replaced my dead airport router with a Netgear91-5g router and synced it successfully to my Lexmark Pro 915 printer and my computer; yet when I try to print wirelessly I get the message: "printer not connected; printer offline". Lexmark support verified that my printer was connected to the new router and the problem was with the computer's printer configuration and they could reconfigure it online if I paid for their "Premium Support" services ($119 for one year, 3 fixes). I declined, feeling sure that this is something I could do if I knew how. Could it be an incompatability issue with OS 10.8.3?
You saved me $$$ that I can ill afford on my fixed income. I was very unhappy with the "support" from Lexmark... what a rip off! Thank you dwb!
-
my host name changes every few days, since Xmas adding a macbook its changed 6 times. Do I need to stop this? Does it cause problems with sharing between the iMac and macbook?
There are several possible causes for this problem.
1. Two (or more) computers on the local network have the same Bonjour name, such as "X's-MacBook-Pro.local".
2. You have two simultaneous connections to the same local network: probably Ethernet and Wi-Fi. If applicable, disconnect the Ethernet cable or turn off Wi-Fi.
3. A Mac wakes from sleep due to network traffic. This is due to a bug in OS X that may only affect some models.
4. A device that gets its network address from the router wakes from sleep, and the address it was using before has been assigned to another device.
5. A third-party wireless router has incompatible settings or firmware. In that case, refer to the manufacturer or ISP for support. Restarting the router may help, temporarily.
6. See also this support article.
Rename the computer in the Sharing preference pane. -
I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.
Cannot see what files ? Music (synced music should appear in the iPod app), films/TV shows (Videos app), documents ... ?
-
Is anyone having problems with the battery heating up and draining the power? Mine has been doing this for about 2 months now.
This is a major problem with Lollipop, but yo said it started 2 months ago. Several people have fixed problem by removing FaceBook And Face book messenger and then re loading the apps again. You might want to clear your cache before reloading. Not sure this is your problem, but worth a try. Good Luck
-
Problems with creation of catalogue XPGrpwise and temporary
Problems with creation of catalogue XPGrpwise and temporary files.
I use GroupWise 8.01 and WinXP (SP2), OpenOffice 3.1.
Why at opening files in Library, temporary files are not created in catalogue C:\Documents and Settings\Jon Smith\Local Settings\Temp\XPGrpwise, and created in catalogue C:\Documents and Settings\Jon Smith\My Documents. That causes problems. How to change a situation that worked as it is necessary.
Catalogue XPGrpWise is created and leaves duly in catalogue C:\Documents and Settings\Jon Smith\Local Settings\Temp\.Cvetaev,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
I have an iPhone 4S and never had a problem with syncing it. But suddenly, when I connected my phone to my mac, it says that its in recovery mode, and I need to restore it in order to sync. I've updated both my phone and my itunes, and it didnt work.Help?
fighter19lisa wrote:
that only makes it say its synced, when its not.
No, it does not. It transfers purchases from the iDevice to the computer. The computer must be authorized for the Apple ID that the content was acquired with.
fighter19lisa wrote:
my playlists wont show up on the phone.
Are they selected to sync? Is Manually Manage content on the device selected?
fighter19lisa wrote:
i had to change my password for my aol account again and i still cannot get my email on my phone to even work
What does that have to do with syncing content to the device? FYI, nothing. -
Do you understand me ? I want money back.Because I have problem with LINE In App Purchase.And no one try to resolve this problem.And the answer of NEVER LINE JAPAN they don't have responsibility.I think it will be effect with APPLE image also.I want you to help me everyways to refound my monet back.Could you?
Contact iTunes Store Support.
-
I have problem with Itunes losing where podcasts and some purchased music is located. Don't know how Itunes losing the locations of the files and I can't find the files on my hard drive. What can I do to stop Itunes losing location and restore my files?
Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.
Maybe you are looking for
-
How can I print a usage report for the HP laserjet 600 M602? Thanks
-
Three days ago, my iPhone 4 started sporadically displaying this message when I plugged my authentic apple iPhone charger in: "This accessory may not be supported." I was dismissing it, until my battery was nearly dead and I finally realized that whe
-
Changes to Menubar1 show if I view source but do not actually work
I updated links in menubar1. If I preview from within Dreamweaver they work fine. They do not show when I go directly into the browser. If I view the source the changes are there. this is the URL http://www.sweet-stitches.com/html_files/GailDoane.ht
-
External XML data files to add values to drop down lists
I would like to have external XML data files to add values to drop down lists in my form.. But when i create a data connection it is working properly only in the Preview in Livecycle Designer.. but not in the PDF form(Adobe Reader). Moreover im not s
-
ITunes radio doesn't play songs by artists added to any of my stations
This is a clarification of an earlier question. So you can create a station with a "seed" which can be an artist, song or genre. Once itunes creates that station you can modify the station with the available "more like this", or "Never again" buttons