Internet Read Mode Install Parameter

Is there an install parameter for Reader X for "Internet - Disp
lay in Read Mode by default" turned off?

As it's already been 9 days since I posted this and more things have happened, I'd like to close this post. As I've brought back the Macbook to another Apple Store, they would tell me that the Logic Board is broken. After all, the Apple people aren't always right and my first assumption seemed to be true and it was not the harddrive.
Anyhow, problem is not solved, but at least I know now what's going on.

Similar Messages

  • Disk Utility in Internet Recovery mode cannot properly detect new hard drive

    I intend to format my new hard rive and install OS X into it.
    Here is my problem, I bought a new 1TB HGST 7200rpm hard disk and put into the macbook. I boot up under Internet recovery mode, under the disk utility I tried format to MacOS Extended Journaled but it takes ages (stuck for more than 15 minutes). I simply just cannot get the macbook to read the drive under disk utility from Internet recovery mode.
    Here are the things that I have tried:
    1. Boot the MacBook from old drive, successfully use the disk utility to zero out format (MacOS Extended Journaled) with 1 partition (GUID). But when I boot the Mac under Internet recovery mode, the disk utility simply cannot mount the drive.
    2. Restore the new drive (as an external drive) from the old drive using disk utility, successfully restore. I could startup the new disk as an external drive, but when I put it into the Mac it shows flashing folder. I waited for more than 30 minutes, the flashing folder just stays there.
    3. Boot the MacBook on Internet recovery mode and connect the new drive as external drive, no problem. I reinstall OS X into it but it midway it stop and error message says something like cannot add additional components.
    Not sure what is the problem, I think I have exhausted all method. There is no issue with the new hard drive and MacBook.

    The MacBook is early 2013. It came with 1TB Mountain Lion, I left the DVD in my country so I don't have it with me. How do I download the installer? the Mac App Store only lets me upgrade the OS to Maverick.
    I have tried to restore the new drive from my old drive, but the only way is to use Internet Recovery. The Disk Utility boot from the old drive OS (Mountain Lion) does not allow me to restore my new hard drive from the old (current boot) drive, the message instruct me to use the Internet recovery mode. From here I can see my new drive format as GUID, but when I boot to Internet Recovery the Disk Utility recognised my new drive format as Master Boot Record instead of GUID...?????

  • My air is getting exclamation point in internet recovery mode

    my macbook air is getting exclamation point during internet recovery mode? help?

    Reset the TC to factory and start again.
    Use all SMB type names for wireless and base station.. Not apple type names.. this is more important since Mavericks.
    I also recommend different names for the different bands.
    So for example.
    TC name.. TCgenx (I use whatever the generation number is for the x.. eg TCgen4 or latest one TCgen5)
    WIreless name.. TC24ghz for 2.4ghz
    TC5ghz for 5ghz
    You can also set the channel manually.
    If you still have issues.. start with no security and then if it fails to connect there is something seriously wrong with the laptop. Did you upgrade install Mavericks?? That can lead to driver issues.. I would recommend a clean install.

  • Error -2003F while Internet Recovery Mode Command+R when Boot

    I was trying to install Kali Linux but the problem is that i cant boot Mac os, even if i press ALT to go into Recovery mode i cant see any HDD,so i am trying to restore it from COMMAND + R (INTERNET RECOVERY MODE) BUT AM GETTING AN ERROR: -2003F

    Usually, that means either you have no internet connection established or your model does not support Internet Recovery. Computers that can be upgraded to use OS X Internet Recovery.

  • Fold/Unfold (Outline) in BO 4.0 Webi Report - in Reading Mode do not work

    I  have BO 4.0 Webi report with fold/unfold functionality(Outline). It works fine when I open it in Design mode but do not work in Reading mode. Could anyone please advise if they have faced such issue?
    Thanks in Advance.
    Regards,
    Anita 

    Hi All,
    I checked with the BO authorization team who grant access to different user groups to access BO reports.  It means that I was not having the access rights to view my report in "Rich Internet Application" mode. Once the access permissions were granted to my user group. I see the option as highlighted in red below. To view the report in reading mode in BO 4.0 BI Launchpad, you should set the preferences as below:
    Thanks for your support.
    Regards,
    Anita

  • HT4410 I have just installed Windows 7 64-bit full version Home Premium using Bootcamp and cannot get access to the internet. I installed on a Macbook Air Mid 2012 with Mountain Lion. Are there some drivers that are missing from the Windows 7

    Dear Apple. I have just installed Windows 7 64-bit full version Home Premium using Bootcamp and cannot get access to the internet. I installed on a Macbook Air Mid 2012 with Mountain Lion. Are there some drivers that are missing from the Windows 7 bootcamp install download from Apple

    It is a Total Misconception that the Support files are installed when you are installing Windows, even if the USB drive that holds them is inserted in the system when doing the Windows install.
    You must always Run the Setup.exe files from the support files or run the drivers individually once Windows has finished installing and booted to the desktop.
    Also you really need to run the Boot Camp Control Panel Applet and check for updates as not all the newest drivers for full function of all the hardware is included with the original support download. That download is basically a generic version to get the system working and without doing the updates not everything will work properly.

  • HT4718 Is it possible to back up files onto an external hard drive while in internet recovery mode?

    This morning, upon starting up my MacBook, I was greeted with the lovely gray screen. I'm in internet recovery mode and have attempted to repair my disk, but it's too damaged according to the disk utility. So, I'm going to have to reinstall OS X Lion. I'm worried about losing my files and bought a 500gb external hard drive in hopes that I can back up my files while in recovery mode and then erase and reinstall the operating system
    Any help would be much appreciated!

    There are several ways to back up a Mac that is unable to fully boot. You need an external hard drive to hold the backup data.
    1. Boot into Recovery (command-R at startup; 10.7 or later), from a local Time Machine backup volume (option key at startup; 10.7.2 or later), or from your installation disc (C key at startup; 10.6.8 or earlier.) Launch Disk Utility and follow the instructions in the support article linked below, under “Instructions for backing up to an external hard disk via Disk Utility.”
    How to back up and restore your files
    2. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode by holding down the key combination command-T at the startup chime. Connect the two Macs with a FireWire or Thunderbolt cable. The internal drive of the machine running in target mode will mount as an external drive on the other machine. Copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    How to use and troubleshoot FireWire target disk mode
    3. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.

  • After i enter my password for the wifi in internet recovery mode it just shows a blank screen no disk utility shows why??? NEED HELP

    After i enter my password for the wifi in internet recovery mode it just shows a blank screen no disk utility shows why??? NEED HELP

    Enter your admin passwrod, not Wi-Fi network password.

  • How to hide save button / read mode only in browser adobe viewer?

    Currently I embed a pdf to my website , the problem is, I would like to show the read mode only instead of a full tool bar to the visitor , also , I would like to hidden the save file option .
    I checked there is an open parameter in the offical document that can specific
    toolbar=1&navpanes=0&statusbar=0&messages=0
    However, can I specific what opition is allow in the toolbar (actually I would like to allow only zoom function )
    Are there any way to doing this? Thanks.
    <object id = 'zoomPage' type='application/pdf' data= '" + sourceFolder + "/2013/08/17/0/0/A/Content/pdf/pdf_" + currZoomPageNo + ".pdf#toolbar=1&navpanes=0&statusbar=0&messages=0'><p>The PDF can not display</p></object>

    Much of the documentation for Acrobat JavaScript has not changed and still operates exactly as it did with Acrobat 3.1 so it is possible that the old documentation is still valid. I have found that the Acrobat JavaScript Guide fro
    version 5 has some very excellent documentation about the field object UI for the various form Fields.
    If one goes to the Acrobat Developer Center and uses the Working with Distiller, Fonts and more and the uses the PDF Open Parameters one gets the documentation from the version 9.0 SDK form June 2008. This document probably has not been updated since then.  Another issue to consider is the changes in IE, the number of new web browsers, and the introduction of HTML 5 all of which could change how parameters are passed or allowed. This technique has always been problematic.
    Within an external viewer, it is not possible to show/hide the toolbars.
    app.toolbar

  • Remove Read Mode Hovering Toolbar from Local Installation

    You can just jump to the below red colored question if you don't want to read the supporting description.
    I prefer to read PDF documents especially long ones in a non-disturbing manner.
    More like in a clean look that is trending with cleaner designs in MS Office, Win 8, and others.
    Here is an example of kind of view I am talking about that I would like.
    We can get up to this point with few simple key stokes, Ctrl+H (Read Mode) would hide your side navigation tab and your main toolbar.
    F9 would hide your Menu bar. Now all you have is the title bar, scrolling bar, and the bottom highlighted hovering toolbar.
    Granted that yes you can move around the hovering toolbar by simple dragging and that it fades in-out but with any mouse movement it appears back on.
    Yes its useful for controls, but if I want any I can just press Ctrl+H and/or F9 and it will bring me all the controls necessary.
    I can use full screen mode yes for removing all the excess visuals and purely focus on the document but I can't select text or do any other things unless I come out of the full screen mode, which then destroys the purpose of clean look bringing back to normal look.
    QUESTION
    How to remove the Hovering Toolbar from the read mode?
    We are not talking about embedding setting in a PDF so that it would do that on any computer but configure my local computer's Adobe Reader so that every time I go into read mode I wouldn't have to see the above highlighted hovering toolbar.
    If there is some simple setting to disable it that's great, if I would have to do some destructive work and remove code/files to get rid of the hovering toolbar that's fine too.
    Thanks.

    Edit > Preferences > Internet > Display in Read Mode by default

  • Reader Successful Install is not successful

    Yesterday, I had Reader X on my PC and it worked fine.  When I tried to upgrade to Reader XI, I downloaded it to my computer, and at the end I was told that the installation was successful, but Reader XI did not show up anywhere.  This happened 3 times.  So I deleted Reader X and tried to download Reader XI again. 
    I downloaded Adobe Reader from the Internet, saved it, and ran the exe file. At the end I was told that the installation was successful.  However, Reader is not on my computer.  There is no Reader icon on my desktop.  When I try to open a PDF document, Reader is not listed as an option for opening the document.
    Adobe Reader is not in my Downloads folder, even though I saved it (when I downloaded it) and then ran the exe file.
    I have a Compaq desktop PC running Windows XP.
    How do I successfully install Reader on my PC?

    I tried a variety of things to get Reader XI installed:
    I had used Windows' System Restore to make a backup (restore point) before I began this fiasco of trying to install Reader XI.  I tried to restore to that restore point, but Windows said that it could not restore to that restore point.  No explanation was given.
    I looked for Windows updates, but my Windows software was up to date.
    I removed all traces of earlier versions of Reader folders and files.
    I turned off my computer's security software while trying to install Reader XI.
    I used different browsers (Firefox and Internet Explorer) to download and install Reader XI.
    All of these attempts to install Reader XI failed.  I was able to download and save the installation (.exe) file on my hard drive, but when I ran the program, it did not install Reader XI.
    After fighting this frustrating problem for 2-3 days, I found Reader X on the Internet, and downloaded and installed it without any problems.  So now I am back to where I was before trying to install Reader XI.  Since I am not a masochist, I plan to use Reader X indefinitely.
    Thanx for you assistance. I truly appreciate it.  If someone can offer suggestions as to what may have caused my problem and/or how to successfully install Reader XI, I will try again.

  • My Internet protection mode box not on bottom of my browser like it use to be.

    Stop using internet explore and downloaded firefox, When i last up dated and started to use themes my internet protection mode box that read your protected is not on my bottom right hand corner anymore why.

    Hi there. That feature was provided by an add-on, because the original Firefox never had that feature. If you look through the list of add-ons, you'll probably see that one of them was disabled, because it is not compatible with Firefox 14.0.1. You can contact the add-on author to ask, if there will be an update available for it.

  • HT2470 Can Internet explorer be installed in Macbook pro

    1.Can Internet explorer be installed in Macbook pro?
    2.Can I have dual boot in my Macbook pro - with Mac and Windows ??

    No, unless you install Windows, which you can certainly do. Boot Camp allows you to install any number of different operating systems.
    If you're trying to use a website that refuses to load because it demands Internet Exploder, I suggest enabling the Develop menu in Safari's Preferences, and selecting a User Agent that placates the website.

  • I'm having problems with my internet connection after installing OS X Lion. Is this a known problem or just a local problem?

    I'm having problems with my internet connection after installing OS X Lion. Is this a known problem or just a local problem?
    After +/- 10 to 15min my connection is gone.
    Does anyone have a sollution?

    Lots of people are having the same problem, you're not the only one, belieeeeve me.
    Just Googling the problem gets you tons of people complaining about the same thing, SOMETHING is up with Lion what wasn't happening with Snow Leopard. i just bought a new Imac and it CAME with Lion, so i started experiencing this internet dropout immediately.
    It's been going on for the most of a year it looks like (at least by the dates from the threads i've been reading)
    So your best bet is to fiddle with the System Preferences and read what other people have used to make theirs work. i'm doing that myself right now.  I already posted  a similar thread last night trying to figure out why my connection kept on dropping, i got a reply which linked me to a site. i followed the instructions there, so far so good, but i'm just being cautiously optimistic.
    i'm gonna call Apple today and see if they've found anything, though seeing as this is a problem right out of the box there may not be an immediate solution. Good luck hunting for a solution :3
    Site:
    http://osxdaily.com/2011/11/06/lion-wi-fi-problems-solution-mac/?utm_source=feed burner&utm_medium=feed&utm_campaign=Feed%3A+osxdaily+%28OS+X+Daily%29&utm_conten t=FaceBook

  • Read Mode Navigation Block

    Is it possible to use the read mode as set in the InfoObject maintainance in the navigation block of a web application?
    The Parameter BOOKED_VALUES can only be set to either M,D or Q and this setting is valid vor all InfoObjects.
    I don't want to use BOOKED_VALUES_N to specify the read mode for each object but use the read mode as set in the infoobject maintainance.
    Thanks,
    Beat

    Hi,
    There is a setting in SPRO to change the Read mode of the InfoProvider Properties.
    What is the impact of changing to 'Query to read all data at once'?
    Reporting Agent -
      I enabled 'Precalculated Data' for web template read mode. I ran the reporting agent to pre-calculate data.
      I am trying to test whether if the data is pre-calcualated then will the improve the performance of the hierarchy.
    IMPACT -
      1. All th other navigation options are diaslbed, like 'arrow mark' to open web item tray.
      2. Hierarchy nodes are not opening.
      3. Context menu got disabled
    It looks like a complete static report.
    Did someone experienced this problem?
    Thank you
    Arun

Maybe you are looking for