Internet really slow on my macbook
I am using linksys WRT54G for my macbook and two imacs. The internet is so much slower on my macbook than on the imacs. I can't use the CD for setup because that is only for windows and i am using a mac. How is it possible that internet speed is so much slower on one computer and not on the other two, but im using the same router? Is there something wrong with the configuration on my macbook? Someone told me to type in the router on my web browser and change the setting to allow only G-access, but that didnt affect the speed. I dont know what to do
Sounds like a corrupted cache file, see the OnyX routine here.
..Step by Step to fix your Mac
This also might assist
Why is my computer slow?
Similar Messages
-
Internet Really slow on OSX tiger
the past week or so internet has been really slow on OSX however since I have vista installed as well I checked it on vista and internet runs great under vista.
what could be slowing down the internet on OSX.
also tryed multiple browsers on OSX none of them run good now.How much free space do you have on your HD?
Look at these links
52 Ways to Speed Up OS X
http://www.imafish.co.uk/articles/post/articles/130/52-ways-to-speed-up os-x/
Tuning Mac OS X Performance
http://www.thexlab.com/faqs/performance.html
11 Ways to Optimize Your Mac's Performance
http://lowendmac.com/eubanks/07/0312.html
The Top 7 Free Utilities To Maintain A Mac.
http://mac360.com/index.php/mac360/comments/thetop_7_free_utilities_to_maintain_amac/
Mac OS X: System maintenance
http://discussions.apple.com/thread.jspa?messageID=607640
Cheers, Tom -
My internet is really slow, I am getting about 0.1 - 0.73 kb/s when I should be getting around 5 mb/s (Not megabits).
I want to DreamHost.com and here's my results are in the picture.Open a web browser and go here http://192.168.1.1/htmlV/transtat.asp then copy/paste the Transceiver Statistics in your next post.
If a forum member gives an answer you like, please give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem. Thanks !!!
http://forums.verizon.com/t5/Verizon-net-Email/Fix-for-Missing-Inbox-sent-folders-etc-with-Internet-Explorer-11/m-p/647399 -
Hello,
The 3G internet on my iPhone 5S is really slow and on occasion doesn't connect at all until I turn data off and then back on again (sometimes having to turn the phone off to get it to work) which is really annoying although the SIM card seems to work fine, any help would be appreciated.
Many Thanks
JordanHave you tried measuring the 3G speed? The free app speedtest.net is an accurate way to do it. Note that cellular data speeds are very sensitive to signal strength, and 3G itself isn't all that fast at its best. If it tests above 1Mb/sec that would be considered very good.
Usually speed issues are more network related than phone related. -
Internet really slow on my Mac
Hello, thank you in advance for any help.
My computer slows down to a really slow pace that i can't even check my email. I've checked my connection but it seems to be fine.
My husbands internet works fine - which leads me to think it is the computer.
I've tried rebooting the internet but it then just says it cannot connect.
I do still have tiger - wold upgrading it really help it? I do plan on buying it but, I can't till November. (BOO!)Welcome to Apple Discussions!
Is your husband's internet on a separate account on the same computer, or a separate computer? If it is a separate computer, it is possible you have issues connecting to your router/airport base station/wireless access point.
Do you have a separate box for your internet, and the connecting of multiple machines to the internet? That's the router, airport basetation, or wireless access point. The modem which either hooks into the phone line directly, or the cable line directly, or the satellite dish directly is often able to have a more reliable connection to the computer than the router. To test this, turn off the modem, and connect the computer directly to the modem. If the modem has a LAN and WAN ports, connect it to the same LAN port your husband's computer was hooked up to, and make sure your internet settings are the same as your husband's. If this does not sound like your setup:
1. What is your internet service provider (who do you pay to have internet service)?
2. What modems and/or routers do you have?
3. Is it just one computer hooked up, or multiple? -
Why is my internet running slow on my macbook pro?
About a month ago I hooked up a router for me and my fiancees to use our laptops. She has a pc and I have a macbook pro. Everything was working fine, but for the past week, the internet on my mac has been running painfully slow. Her internet is working just fine, but mines is almost non-existent. I plugged the modem directly into my mac to see what happened and it worked fine then. But when i hooked up the router again it essentially stopped working again. In lamen's terms how can i fix this?
You tacked on an inactive thread. Post your own topic and supply more detailed information to get help.
It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions.
Please complete or update your system profile so the users here can properly help you. -
ok so i have had the ipad 2 for about a year maybe a bit earlier but usualy when i start using it it works great then maybe after searching something and watch a 5 - 10 videos its starts to stop loading the video. it will just remain loading the first part of the website Ex www.youtube.com it will only be loading the www part and nothing happens the same goes for google only the www i normaly reset my ipad 2 and i turn of the safari application and turn it back on and it wokrs fine and then it starts all over again but its starting to get really annoying for me now if anyone has any help please please share.
your connection might be slow
use wifi
dont use 2g or 3g connection they are slow -
Internet really slow for four days now - cookies problem?
For the last four days my internet has been as-slow as dial-up!! it was working fine before, fast connection, no problems. For the last four days, especially in things like Ebay and Facebook it just sticks and shows a cookie with a red cross through it and a timer going round at the top left. I have allowed all cookies etc and cleared my history but nothing sorts the problem. Is this a problem that other people are experiencing? I live in Kent. Many thanks.
Right just spoken to someone at Sky who, after having me check my connection and tell me there is an issue, swap my microfilter for the spare one that came with the fibreoptic broadband last week, recheck my connection which was then slower! search for a flat head screwdriver, undo the screws on the master socket to be told i have an old master socket so not to worry, put the incredibly old screws back in....a task in itself, that in fact an engneer is needed!!! Maybe worth a call to Sky but have a flat headed screwdriver to hand!! Also they cannot arrange a sky engineer until tomorrow so are calling me back to arrange tomorrow afternoon. Hope this helps. To be fair the sky person i spoke to was very helpful i just found this a labourious task to find out something i already knew!
-
My Mail is really slow and the macbook fan is always on.
I have tried different fixes involved in the cleaning up the index, envelope, etc and they do work, for about an hour or so and the problem starts again. My fan is always on when things start slowing down. and then soon my whole macbook is affected. I have over 350 000 messages saved. would that be the cause? can anyone help? thanks.
How much free space on the startup disk? Not enough can slow the drive down.
Click the Apple menu icon top left in your screen. From the drop down menu click About this Mac > More Info > Storage
Make sure there's at least 15% free disk space.
350,000 messages? Depending on file size, that could be taking up a ton of storage space.
To see a breakdown click About This Mac from your Apple () menu then click More Info then click Storage.
OSX Tips The Storage Display
message edited by: cs -
Everything's really slow on my macbook
I get the spinning beach ball all the time but especially with Itunes. Songs won't play for more than 10-20 seconds without pausing for 5-10. Wifi connection is fine but the internet just takes way longer to load/switch between tabs/scroll
Hi there rachawkins84,
You may find the troubleshooting steps in the article below helpful.
Mac OS X 10.6: If your Mac computer runs slowly
http://support.apple.com/kb/PH6844
-Griff W. -
My internet is slow on my Macbook.
But..... only on my home internet. On all other networks it is fine and all other devices in the house work fine.
try changing your dns - system preferences - network - advanced - dns - see image below.
good luck - hope you get it sorted out.. -
Problem description:
My MacBook Pro is running really slow. Applications won’t open or take up to 10 min.
EtreCheck version: 2.1.5 (108)
Report generated December 27, 2014 at 9:15:58 PM CST
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
MacBook Pro (13-inch, Late 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.4 GHz Intel Core i5 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: one day 6:55:8
Disk Information: ℹ️
TOSHIBA MK5065GSXF disk0 : (500.11 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HD (disk1) / [Startup]: 498.88 GB (5.04 GB free) (Low!)
Core Storage: disk0s2 499.25 GB Online
MATSHITADVD-R UJ-8A8
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[loaded] com.epson.driver.EPSONProjectorUDAudio (1.30 - SDK 10.4) [Support]
[not loaded] com.seagate.driver.PowSecDriverCore (5.2.6 - SDK 10.4) [Support]
/System/Library/Extensions/Seagate Storage Driver.kext/Contents/PlugIns
[not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.2.6 - SDK 10.4) [Support]
[not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.2.6 - SDK 10.5) [Support]
[not loaded] com.seagate.driver.SeagateDriveIcons (5.2.6 - SDK 10.4) [Support]
Problem System Launch Agents: ℹ️
[killed] com.apple.CallHistoryPluginHelper.plist
[killed] com.apple.coreservices.appleid.authentication.plist
[killed] com.apple.icloud.fmfd.plist
[killed] com.apple.telephonyutilities.callservicesd.plist
4 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
[killed] com.apple.ctkd.plist
[killed] com.apple.icloud.findmydeviced.plist
[killed] com.apple.ifdreader.plist
[killed] com.apple.nehelper.plist
[killed] com.apple.wdhelper.plist
[running] com.seagate.TBDecorator.plist [Support]
5 processes killed due to memory pressure
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Support]
[loaded] com.carbonite.launchd.carbonitealerts.plist [Support]
[running] com.carbonite.launchd.carbonitestatus.plist [Support]
[loaded] com.coupons.coupond.plist [Support]
[loaded] com.hp.help.tocgenerator.plist [Support]
[loaded] com.trendmicro.itis.dca.plist [Support]
[running] com.trendmicro.itis.uimgmt.agent.plist [Support]
Launch Daemons: ℹ️
[failed] com.adobe.fpsaud.plist [Support]
[running] com.carbonite.launchd.carbonitedaemon.plist [Support]
[loaded] com.microsoft.office.licensing.helper.plist [Support]
[running] com.trendmicro.icore.av.plist [Support]
[running] com.trendmicro.icore.main.plist [Support]
[running] com.trendmicro.icore.wp.plist [Support]
[running] com.trendmicro.itis.plugin.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist [Support]
[loaded] com.google.keystone.agent.plist [Support]
[invalid?] com.jdibackup.JustCloud.autostart.plist [Support]
[invalid?] com.jdibackup.JustCloud.backupstart.plist [Support]
[loaded] com.trendmicro.itis.uninstaller.plist [Support]
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
bomgar-scc-20130819-104735 UNKNOWN (missing value)
bomgar-scc-20130905-143949 UNKNOWN (missing value)
USB Display Agent Application (/Applications/USB Display/USB Display.app/Contents/Resources/USB Display Agent.app)
WDDriveUtilityHelper Application (/Applications/WD Drive Utilities.app/Contents/Resources/WDDriveUtilityHelper.app)
WDSecurityHelper Application (/Applications/WD Security.app/Contents/Resources/WDSecurityHelper.app)
USB Display Agent Application (/Applications/USB Display/USB Display.app/Contents/Resources/USB Display Agent.app)
bomgar-scc-20130819-104735 UNKNOWN (missing value)
bomgar-scc-20130905-143949 UNKNOWN (missing value)
HP Scheduler Application (/Library/Application Support/Hewlett-Packard/Software Update/HP Scheduler.app)
HP Product Research Application (/Library/Application Support/Hewlett-Packard/Customer Participation/HP Product Research.app)
Internet Plug-ins: ℹ️
SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Support]
FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 [Support]
CouponPrinter-FireFox_v2: Version: 5.0.5 - SDK 10.6 [Support]
Flash Player: Version: 15.0.0.223 - SDK 10.6 Mismatch! Adobe recommends 16.0.0.235
QuickTime Plugin: Version: 7.7.3
Default Browser: Version: 600 - SDK 10.10
User internet Plug-ins: ℹ️
npBcsMcTcIO: Version: Unknown [Support]
Safari Extensions: ℹ️
Trend Micro Toolbar [Installed]
3rd Party Preference Panes: ℹ️
Carbonite [Support]
Flash Player [Support]
Paragon NTFS for Mac ® OS X [Support]
Seagate Dashboard for Mac OSX [Support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
HD: Disk size: 498.88 GB Disk used: 493.84 GB
Destinations:
Jens Seagate Backup [Local]
Total size: 999.86 GB
Total number of backups: 6
Oldest backup: 2014-06-24 10:33:56 +0000
Last backup: 2014-12-17 17:14:18 +0000
Size of backup disk: Too small
Backup size 999.86 GB < (Disk used 493.84 GB X 3)
My Passport for Mac [Local]
Total size: 2.00 TB
Total number of backups: 14
Oldest backup: 2013-08-21 19:19:35 +0000
Last backup: 2014-12-19 11:44:23 +0000
Size of backup disk: Excellent
Backup size 2.00 TB > (Disk size 498.88 GB X 3)
Top Processes by CPU: ℹ️
6% coreaudiod
5% CarboniteDaemon
4% iMovie
3% JustCloud
3% Wondershare Player
Top Processes by Memory: ℹ️
335 MB iPhoto Library Manager
180 MB Finder
142 MB iMovie
70 MB Preview
51 MB Microsoft Word
Virtual Memory Information: ℹ️
149 MB Free RAM
1.04 GB Active RAM
897 MB Inactive RAM
1.17 GB Wired RAM
30.53 GB Page-ins
1.42 GB Page-outs
Diagnostics Information: ℹ️
Dec 26, 2014, 05:17:12 PM /Library/Logs/DiagnosticReports/iPhoto_2014-12-26-171712_[redacted].cpu_resourc e.diag [Details]
Dec 26, 2014, 03:47:17 PM /Library/Logs/DiagnosticReports/CarboniteDaemon_2014-12-26-154717_[redacted].cp u_resource.diag [Details]
Dec 26, 2014, 02:22:01 PM Self test - passed
Dec 26, 2014, 11:48:03 AM /Library/Logs/DiagnosticReports/CarboniteDaemon_2014-12-26-114803_[redacted].cp u_resource.diag [Details]You have nearly run out of disk space. Either purchase a larger one or start cleaning out the one you have?
-
My Macbook Pro is running really slow and programs keep crashing
I have a 15" MacBook Pro (Mid 2010 Model) that is doing my head in, as it runs really slow most of the times as soon as I open more than one program (especially if I use Excel or Word of course). I ran the EtreCheck and the result is below, hopefully this will help some of you guide me in the right direction?
Most of my memory (over 200GB) is used up by "OTHER", any idea what that could be and how I could easily free up space?
Thanks a lot
EtreCheck version: 2.1.8 (121)
Report generated 17 April 2015 08:02:01 BST
Hardware Information: ℹ️
MacBook Pro (15-inch, Mid 2010) (Technical Specifications)
MacBook Pro - model: MacBookPro6,2
1 2.4 GHz Intel Core i5 CPU: 2-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1067 MHz ok
BANK 1/DIMM0
4 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 155
Video Information: ℹ️
Intel HD Graphics - VRAM: 288 MB
NVIDIA GeForce GT 330M - VRAM: 256 MB
Color LCD 1440 x 900
System Software: ℹ️
OS X 10.10.2 (14C1514) - Time since boot: 0:16:25
Disk Information: ℹ️
Hitachi HTS545032B9SA02 disk0 : (320.07 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 318.84 GB (64.39 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 319.21 GB Online
MATSHITADVD-R UJ-898
USB Information: ℹ️
JMicron Samsung S2 Portable 1 TB
EFI (disk2s1) <not mounted> : 210 MB
TIME MACHINE (disk2s2) /Volumes/TIME MACHINE : 999.86 GB (70.54 GB free)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Internal Memory Card Reader
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Apple Inc. Built-in iSight
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Extensions
[loaded] com.logmein.hamachi (1.0.0 - SDK 10.9) [Click for support]
/Library/Extensions/tap.kext
[not loaded] foo.tap (1.0) [Click for support]
/Library/Extensions/tun.kext
[not loaded] foo.tun (1.0) [Click for support]
/System/Library/Extensions
[loaded] com.logmein.driver.LogMeInSoundDriver (4.1.48f99) [Click for support]
[loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.67) [Click for support]
[not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.67) [Click for support]
Startup Items: ℹ️
tap: Path: /System/Library/StartupItems/tap
tun: Path: /System/Library/StartupItems/tun
Startup items are obsolete in OS X Yosemite
Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist [Click for support]
[running] com.logmein.hamachimb.plist [Click for support]
[running] com.logmein.logmeingui.plist [Click for support]
[running] com.logmein.logmeinguiagent.plist [Click for support]
[not loaded] com.logmein.logmeinguiagentatlogin.plist [Click for support]
[failed] com.rim.BBLaunchAgent.plist [Click for support] [Click for details]
[running] com.trusteer.rapport.rapportd.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.google.keystone.daemon.plist [Click for support]
[loaded] com.hamachix.tuncfgd.plist [Click for support]
[running] com.logmein.hamachi.plist [Click for support]
[running] com.logmein.logmeinserver.plist [Click for support]
[loaded] com.logmein.raupdate.plist [Click for support]
[failed] com.rim.BBDaemon.plist [Click for support] [Click for details]
[running] com.trusteer.rooks.rooksd.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.citrixonline.GoToMeeting.G2MUpdate.plist [Click for support]
[running] com.spotify.webhelper.plist [Click for support]
[not loaded] jp.co.canon.Inkjet_Extended_Survey_Agent.plist [Click for support]
[running] ws.agile.1PasswordAgent.plist [Click for support]
User Login Items: ℹ️
Dropbox Application (/Applications/Dropbox.app)
Skype Application (/Applications/Skype.app)
Microsoft Database Daemon Application (/Applications/Microsoft Office 2008/Office/Microsoft Database Daemon.app)
Spotify Application Hidden (/Applications/Spotify.app)
BlackBerry Device Manager UNKNOWN Hidden (missing value)
Internet Plug-ins: ℹ️
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
FlashPlayer-10.6: Version: 17.0.0.169 - SDK 10.6 [Click for support]
EPPEX Plugin: Version: 3.0.5.0 [Click for support]
Flash Player: Version: 17.0.0.169 - SDK 10.6 [Click for support]
LogMeIn: Version: 1.0.935 - SDK 10.7 [Click for support]
Default Browser: Version: 600 - SDK 10.10
QuickTime Plugin: Version: 7.7.3
LogMeInSafari32: Version: 1.0.935 - SDK 10.7 [Click for support]
OfficeLiveBrowserPlugin: Version: 12.3.6 [Click for support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
iPhotoPhotocast: Version: 7.0
User internet Plug-ins: ℹ️
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [Click for support]
Picasa: Version: 1.0 [Click for support]
Safari Extensions: ℹ️
1Password
Evernote Web Clipper
WebRank SEO
Audio Plug-ins: ℹ️
EcammAudioLoader: Version: 1.0.3 - SDK 10.8 [Click for support]
CallRecorder: Version: v2.5.14 - SDK 10.8 [Click for support]
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
Trusteer Endpoint Protection [Click for support]
VLC Streamer [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 318.84 GB Disk used: 254.45 GB
Destinations:
SAMSUNG [Local]
Total size: 999.86 GB
Total number of backups: 36
Oldest backup: 2012-04-09 11:47:32 +0000
Last backup: 2015-02-05 20:06:09 +0000
Size of backup disk: Excellent
Backup size 999.86 GB > (Disk size 318.84 GB X 3)
Top Processes by CPU: ℹ️
11% WindowServer
4% Safari
1% Skype
0% Dropbox
0% rapportd
Top Processes by Memory: ℹ️
241 MB Skype
206 MB Safari
172 MB Spotify
129 MB mds_stores
120 MB Finder
Virtual Memory Information: ℹ️
2.49 GB Free RAM
4.03 GB Active RAM
844 MB Inactive RAM
1.23 GB Wired RAM
2.80 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Apr 17, 2015, 07:54:25 AM /Users/[redacted]/Library/Logs/DiagnosticReports/Safari_2015-04-17-075425_[reda cted].crash
Apr 17, 2015, 07:42:57 AM Self test - passed
Apr 16, 2015, 10:33:24 AM /Users/[redacted]/Library/Logs/DiagnosticReports/PDFpen_2015-04-16-103324_[reda cted].crash
Apr 16, 2015, 08:07:28 AM /Library/Logs/DiagnosticReports/DesktopServicesHelper_2015-04-16-080728_[redact ed].cpu_resource.diag [Click for details]
Apr 14, 2015, 07:13:57 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Last.fm Scrobbler_2015-04-14-191357_[redacted].crashLaunch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if Safari crashed, you would enter "Safari" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.
When you post the log extract or the crash report, you might see an error message on the web page: "You have included content in your post that is not permitted," or "The message contains invalid characters." That's a bug in the forum software. Please post the text on Pastebin, then post a link here to the page you created. -
Macbook Pro 13' (Late 2011) STILL really slow since updating to Mavericks
So I've seen a lot of discussions about the same issue and some have threads have been solved, yet others remain unknown. I have the same problem as others that stated they have experience something similar to my case. Just fyi though, that my computer was already really slow prior to upgrading to Mavericks (on Mountain Lion). That was when I decided to do a clean install of Mountain Lion and everything was snappier than ever. It wasn't long until Mavericks came out and I instantly did an upgrade but everything suddenly started slowing down again and it's getting worse. I hope someone can help me out here, thank you.
EtreCheck version: 1.9.12 (48)
Report generated July 27, 2014 at 12:39:20 AM EDT
Hardware Information:
MacBook Pro (13-inch, Late 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.4 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information:
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software:
OS X 10.9.4 (13E28) - Uptime: 0 days 12:18:52
Disk Information:
ST9500325ASG disk0 : (500.11 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Kenichi Kasamatsu (disk0s2) / [Startup]: 499.25 GB (154 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
HL-DT-ST DVDRW GS31N
USB Information:
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Configuration files:
/etc/hosts - Count: 70
Gatekeeper:
Anywhere
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.adobe.SwitchBoard.plist Support
[loaded] com.google.keystone.daemon.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.google.keystone.agent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
User Launch Agents:
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[failed] com.nero.HSMMonitor.plist Support
User Login Items:
iTunesHelper
Dropbox
UnlockID
Google Chrome
Android File Transfer Agent
Internet Plug-ins:
FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
Default Browser: Version: 537 - SDK 10.9
Flash Player: Version: 14.0.0.145 - SDK 10.6 Support
LogMeIn: Version: 1.0.935 - SDK 10.7 Support
o1dbrowserplugin: Version: 5.4.2.18903 Support
QuickTime Plugin: Version: 7.7.3
LogMeInSafari32: Version: 1.0.935 - SDK 10.7 Support
SharePointBrowserPlugin: Version: 14.0.0 Support
googletalkbrowserplugin: Version: 5.4.2.18903 Support
JavaAppletPlugin: Version: Java 7 Update 65 Check version
Safari Extensions:
Open in Internet Explorer: Version: 1.0
Searchme: Version: 1.3
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
Flash Player Support
Java Support
Time Machine:
Time Machine not configured!
Top Processes by CPU:
16% WindowServer
15% Google Chrome
3% hidd
1% fontd
0% Dropbox
Top Processes by Memory:
160 MB Google Chrome
135 MB softwareupdated
98 MB Finder
74 MB mds_stores
74 MB WindowServer
Virtual Memory Information:
321 MB Free RAM
1.52 GB Active RAM
1.20 GB Inactive RAM
977 MB Wired RAM
2.54 GB Page-ins
0 B Page-outs1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
I have really slow internet, i bought OS X mountain lion & tried for days to download it. my internet cuts every time & the download restarts from the beginning is thr a way to download the software as a "zip" file or from a link not app store?
MacBook Pro
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os/mac_os_x_v10.7_lion?view=discussi ons
http://www.apple.com/support/macbookpro
Take it somewhere that has better broadband. The best you can do sometimes is invest in new modem that works with your system instead of the rental etc in most cases.
Do a Safe Boot.
Make sure your firewall is set properly. Don't use 3rd party. AV software can get in the way.
Make sure you are getting the service and a clean strong modem signal - slow is one thing but if it drops off and can't maintain a connection you have hardware issues, not software - and upgrade to a new OS doesn't tend to improve, it may even not work with older networking equipment once you do get it.
I agree and think electronic only goes too far. And when you do get it: burn the package and manually set it aside first before running the intaller! make a flash memory installer, put it on DVDs too.
Maybe you are looking for
-
Question about transferring data from 3GS to iPhone 5
I upgraded from 3GS to iPhone 5. Before reading any articles on transferring data through iTunes, I configured my 3 email programs, contacts and calendar (Google). The Apple instuctions state that I should backup 3GS FIRST, then restore to iPhone 5
-
How do I create a fill-in-the-blank forms
How do I create a fill-in-the-blank forms in Pages 5
-
Hi, I am trying to use the new JDev 10.1.2 with Japoly Plugin (jalopy-jdeveloper-1.1.4.zip). This Japoly plugin version works with the previous JDev prod version (JDev 9.0.5). Here is the error message after I open JDev 10.1.2: C:\opt\oratool\jdev101
-
Need to Clear table every 2 months....Urgent plsss
I need to clear a table every 2 months in a report program. Can anyone tell me how i can do this ???
-
I did the upgrade to 10.6.2 and now my MacBook Pro won't even boot up. I don't know what happened. I got the auto update, it downloaded and restarted my computer but it never cam back. I need my computer... Badly! Has anyone else had this problem and