Internet/Safari load trouble since ugrade (10.4.4)

Since downloading the 10.4.4 software update yesterday, my pages are loading slower on Firefox and Explorer, with Safari sometimes not finding pages at all. Safari is my main browser, but three times, at startup, it couldn't even find the home page (google). I thought it was my connection, but then, firing up either of the other two browsers, Firefox or Explorer, it went immediately to google, no problem, no wait.
Then it was slower on all three browsers when going beyond the home page. Anyone else experiencing this, and do you think it's connected to the upgrade?
iMac G5 Mac OS X (10.4.4) 1 Gb Ram

Similar Messages

Safari loading very slowly - Firefox loads immediately

I have seen a few postings about Safari loading slowly since the upgrade to Yosemite but this is really starting to aggravate me now. I am having no problem whatsoever when loading the same pages in Firefox - which in fact is how I am having to write this posting.
Is ti just me?
Any ideas greatly appreciated.

Linc
While I was aware of this posting I have my concerns about whether it is applicable in this case. It relates to Safari 5.0.1 or later - the latest version of Safari in Yosemite is 8.0 and I have not experienced any noticeable problems until the last few days - although the posting states that last amendments were made only 3 weeks ago its level of detail re Windows and referring to such an old version of Safari lead me to think it is quite a few years since it was written. Why has it suddenly happened? Why does Safari carry out DNS pre-fetching in the first place? What functionality am I losing by disabling it? If Apple are aware of this issue (and if they are not then how is it going to be fixed?) and they fix it in an update then how will I know it has been fixed? Will it be incumbent upon me to re-enable DNS pre-fetching to regain whatever functionality I lost when turning it off?
Sorry to ask all these questions but I hope you can see where I am coming from.
David

Safari slow or won't load pages since recent Safari update.

Safari is slow to load or will not finish loading pages since installing latest Safai update. I have to constantly use the refresh button to finish loading pages. Other browsers work fine. Contacted Apple support, went into safe mode and verified disk and repaired permissions but no improvement. What can I do?

Oh well - they were only the first steps.
Next steps would be:
Finder
Go
Computer
Preferences
SystemConfiguration <--- Copy/Paste this folder onto your desktop and then delete from the Preferences folder
Reboot & Test
Once done, do the following:
Apple Logo
System Preferences
Network
Ethernet / WiFi (Click on whichever method you are using to connect to the internet, on the left column)
Advanced (bottom right)
DNS (Tab)
Left Column, Click +
Add the following numbers: (Click +, type the first set of numbers, hit return. Repeat process for second set)
208.67.222.222
208.67.220.220
Reboot & Test
If the issue is still occuring..
Apple Logo
System Preferences
Users & Groups (or Accounts)
Unlock Padlock (bottom left, with administrator password)
Click +
Change Standard to Administrator
Account Name: Test
Full Name: Test
Password: (leave empty)
Create User
On the left column you will now see 'Test - Admin'
Apple Logo
Log out
Log into 'Test' account
Test to see if your issue with iTunes & Safari occurs in this account and report back..
Regards
MiiCK

My ipod touch is connected to wi-fi but not access safari, youtube, itunes, app store safari even tells me that is not connected to internet, also had trouble at first because I could not connect to wi-fi, afternoon much as told me that the password was i

my ipod touch is connected to wi-fi but not access safari, youtube, itunes, app store, safari even tells me that is not connected to internet, also had trouble at first because I could not connect to wi-fi, afternoon much as told me that the password was incorrect when it was correct, please tell me as I do to let me access youtube, safari, app store, i tunes...
thanks

- Reset the iPOd. Nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections

MAJOR issues with Safari in Leopard since 10.5.1 update

Not sure what the heck is going on with Safari in Leopard since the 10.5.1 update, but for the first time in a long time I've had to put Firefox back in my dock to get a satisfactory web surfing experience.
Using Safari, most page loads don't ever complete (blue bar gets half or two thirds across and hangs), and randomly addresses will become unusable -- i.e., a reliable address like apple.com won't load anymore and I get the "server not responding" error, yet it works perfectly fine in Firefox. Restarting the computer sometimes will fix the problem for that particular address, but other addresses will experience the same behavior.
I have no third party extensions installed (never have) -- don't even have the "Input Managers" folders that others have written about in these forums.
Repaired permissions, still no love.
If anyone has any ideas, would love to hear them -- otherwise I'm going to have to stick with Firefox until Apple can get this straightened out.

If you are updating Safari (or just have):
Input Managers and other plug-ins from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed 10.4.11 and Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari. Remember: Tiger up to 10.4.10 used Safari 2.0.4 or, if you downloaded it, Safari 3.0.3 beta. Safari 10.4.11 uses Safari 3.0.4 which is not a beta. If Safari 3.0.4 on 10.4.11 is not the fastest browser you have ever used, then something is wrong!
Moreover, trying to revert to Safari 2 when running 10.4.11 can have repercussions, as Safari 3.0.4 uses a completely different webkit on which other applications like iChat, Mail, Dashboard widgets etc also rely.
Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party ad-on. Two such add-on that have been frequently mentioned here, among others, for causing such problems are Piclens and Pithhelmet. If you have them, trash them and go the developer's sites to see if new versions are available for Safari 3.0.4.
You should also ensure, if you are running Tiger 10.4.11 or Leopard, that you have downloaded and installed the correct version for your Mac of Security Update 2007-009.1.1, which also deals with the Quicktime/Flash issues you may have experienced, as well as the latest Java update.
Also try this:
Empty Safari's cache (from the Safari menu), then close Safari.
Go to Home/Library/Safari and delete the following files:
form values
download.plist
Then go to Home/Library/Preferences and delete
com.apple.Safari.plist
Repair permissions.
Start up Safari again, and things should have improved.
If not, MacFixit have published a very detailed (very!) article on speeding up a slow Safari, here:
http://www.macfixit.com/article.php?story=20070416000657464

Internet problems over Aiport since 10.4.7 update

Hi,
since my girlfriend updated her iBook G4 and her iMac G5 to Mac OS X 10.4.7 she encounters always the same problem, when she wakes the iBook oder iMac to use them. The computer connects to the our wirless Belkin router. We can see this, because it gets an IP adress from the router and the Aiport symbol shows full signal in the menubar.
However, she can't connect to the Internet, Safari says, that there is no connection to the Internet.
Usually it helps then to switch off/on Airport several times.
This problem occurs on her iBook and on her iMac as well, since they were updated to 10.4.7.
Any ideas how we can get this fixed? Thank you!
Regards, Canubis
PowerBook G4 15'', iMac G3 333MHz Grape Mac OS X (10.4.6) Cinema Display 20", .mac, highlighted keyboard

Hi and thank you for all the answers!
Unfortunately nothing of your ideas worked. Additionally I realized that it should really have to do with the Belkin router, rather than with 10.4.7 or the Macs. I assume this, because also my PowerBook G4 with 10.4.6 and her mum's Windows XP running PC encounter the same problems.
All of this started when Telekom Austria, our Internet provider changed our modem, because the old one had a defect. From the outside it look like beeing the complete same model (but of course it will be some newer revision). But I think that it may not be the modem that causes problems, rather the modem/router combination.
So, I say thank you to all of you for the many many answers and good ideas. If you have any more ideas, they're very welcome, but as this is not mac-specific anymore, I don't want you to bother with this any longer
I will contact Belkin support and maybe the internet provider to fix this. If/When fixed, I'll let you know, if others go to encounter same kinda problems.

Safari house trouble with "secure connections"

Wow. What a pain...
Item 1. Safari has trouble accessing secure sites, even APPLE.COM as per below when I tried to log in to this forum!! Only one bank site works and virtually everything else (forums, banks, anything requiring a log-in) returns a dumb-arse response as below.
"Safari can’t open the page “https://support.apple.com/cgi-bin/WebObjects/ACAuthWeb.woa/wa/login?appIdKey=2dd bca23a85d20e5bf7478812379ae23&path=/login.jspa%3FsuccessURL%3D/category.jspa%3Fc ategoryID%3D169” because Safari can’t establish a secure connection to the server"
Item 2. I threw Safari in the trash and downloaded another copy to re-install and got: "Safari can't be installed on this disk. This update requires Mac OS X 10.5.8 or newer" This despite the fact I'm running 10.6.1
Since Mail has just shat itself recently and couldn't recognize an mail server if one bit it in the arse, I'm thinking 10.6.1 is the culprit and wasn't worth the disk it shipped on.
I normally LOVE my Mac but it has cost me a week of productivity this week and this is about as polite as I can manage.
Ideas? Thank you much for your tips/tricks in advance.
MMM

Oh, and I went to update to 10.6.1 and my computer rejected the download saying its certificate was suspect
So, Mail can't locate servers, Safari won't do secure sites, and my computer rejects Apple's own updates. I have one paranoid laptop.

Safari loads 100% CPU while opening a webpage when working in cooperation with DeviceLock

I have Safari 5.0.5 and DeviceLock 7.1 installed on same computer running Windows XP x86.
When I confugure any network protocol settings in Devicelock (to make its network module active), Safari loads 100% CPU while opening any webpage, for example http://www.apple.com/startpage/
This issue doesn't occurs on other browsers - Internet Explorer, Firefox, so I assume the issue belongs to Safari, not to DeviceLock.

It may not be DeviceLock, or Windows. I see (via Activity Monitor) Safari use 100% CPU while loading a new page on my G5 iMac. Then it drops back again. It may be something to do with Safari 5.0.5

Safari loading problem pages ?

I have Safari loading and opening new pages in an additional tab, typically this is Mackeeper or some other advert..
All software updates are current on this IMac
Any help with solutions ??

There is no need to download anything to solve this problem. You may have installed a variant of the "VSearch" ad-injection malware.
Malware is always changing to get around the defenses against it. This procedure works as of now, as far as I know. It may not work in the future. Anyone finding this comment a few days or more after it was posted should look for a more recent discussion, or start a new one.
The VSearch malware tries to hide itself by varying the names of the files it installs. To remove it, you must first identify the naming pattern.
Triple-click the line below on this page to select it, then copy the text to the Clipboard by pressing the key combination command-C:
/Library/LaunchDaemons
In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
A folder named "LaunchDaemons" may open. Look inside it for two files with names of the form
          com.something.daemon.plist
and
           com.something.helper.plist
Here something is a variable word, which can be different in each case. So far it has always been a string of letters without punctuation, such as "cloud," "dot," "highway," "submarine," or "trusteddownloads." Sometimes the word is "apple," and then you must be especially careful not to delete the wrong files, because many built-in OS X files have similar names.
If you find these files, leave the LaunchDaemons folder open, and open the following folder in the same way:
/Library/LaunchAgents
In this folder, there may be a file named
          com.something.agent.plist
where the word something is the same as before.
If you feel confident that you've identified the above files, back up all data, then drag just those three files—nothing else—to the Trash. You may be prompted for your administrator login password. Close the Finder windows and restart the computer.
Don't delete the "LaunchAgents" or "LaunchDaemons" folder or anything else inside either one.
The malware is now permanently inactivated, as long as you never reinstall it. You can stop here if you like, or you can remove two remaining components for the sake of completeness.
Open this folder:
/Library/Application Support
If it has a subfolder named just
           something
where something is the same word you saw before, drag that subfolder to the Trash and close the window.
Don't delete the "Application Support" folder or anything else inside it.
Finally, in this folder:
/System/Library/Frameworks
there may an item named exactly
            v.framework
It's actually a folder, though it has a different icon than usual. This item always has the above name. Drag it to the Trash and close the window.
Don't delete the "Frameworks" folder or anything else inside it.
If you didn't find the files or you're not sure about the identification, post what you found.
If in doubt, or if you have no backups, change nothing at all.
The trouble may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Then, still in System Preferences, open the App Store or Software Update pane and check the box marked
          Install system data files and security updates (OS X 10.10 or later)
or
          Download updates automatically (OS X 10.9 or earlier)
if it's not already checked.

Why can't Safari load webpages while Bluetooth is on?

I have a Mac Mini Mid 2007 running 10.6.8
Safari refuses to load webpages while Bluetooth is on. This is quite troublesome because I use a Magic Mouse and Wireless Keyboard.
When I turn off Bluetooth and hook up a wired mouse and keyboard, Safari loads the webpages just fine.
Does anyone know how I can fix this?
Thanks in advance!

Hi, see if it's the Service order...
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.

Safari loads slowly

Hi,
I use a MacBook (mid 2010) with 10.9.2 and Safari 7.0.3.
Safari load some pages very often very slow. Almost ever soundcloud.com will load very slow, sometimes also youtube.
Now I've Chrome installed and in chrome it works without problems.
I've already tryed to reset Safari, clean the cache, delete browserdata and -settings from flash and delete the Safari.plst. Also I've tryed the solution paths from apple (DNS). Nothing works.
No I've no idea anymore.
Do you have solution suggestions?

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) on the advice of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD com.evenflow.dropbox com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; BI () { $PB\ :CFBundleIdentifier "$1"; }; LC () { $2 launchctl list | awk 'NR>1 && !/0x|\.[0-9]+$|com\.apple\.(AirPortBaseStationAgent|launchctl\.(Aqua|Background|System))$/{print $3}' | grep -Fv "$1"; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"and $((l-25)) more line(s)"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/(\/Users\/)[^/]+/\1-/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed -n 's/^ *//;5p;6p;8p'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps Model; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^EO]|x([^8]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm POST; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/s/^.*://p' <<< "$p"`; Ps "Battery condition"; for b in FireWire Thunderbolt USB; do o=`SP $b | sed -En '/:$/{s/ *:$//;x;s/\n//;/Apple|Intel|SMSC/d;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm Heat; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; o=; fdesetup status | grep -q On && o=On; Ps FileVault; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n\t* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caug|GPU |hfs: Ru|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN' -k Message Ane 'SMC:' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel log"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; bi=`egrep '\.(kext|xpc)/(Contents/)?Info.plist$' <<< "$sys" | while read i; do [[ -f "$i" ]] && BI "$i"; done`; o=`kextstat -kl | grep -Fv "$bi" | cut -c53- | cut -d\< -f1`; Pm "Kernel extensions"; li=`egrep 'Launch[AD].+\.plist$' <<< "$sys"`; jl=`while read f; do [[ -f $f ]] && $PB\ :Label $f; done <<< "$li"`$'\n'"$bi"; R && o=`LC "$jl" sudo`; Pm Daemons; o=`LC "$jl"`; Pm Agents; o=`for d in {/,}L*/Lau*; do M; done | grep -Fv "$li" | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; p=`lsbom -pfc /var/db/*/*.BSD.bom | sed -En '/peri.+\/.+\./s/^\.\/[^/]+//p'`; [[ "$b" && "$l" && "$p" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do i="$d"/Info.plist; [[ -f "$i" ]] || continue; ID=$(BI "$i") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Shared libraries"; o=`find -L {,/u*/lo*}/e*/periodic -type f -exec cksum {} \; | awk '{print $3"\t"$1}' | grep -Fv "$p" | awk '{print $1}'`; Pm "Periodic scripts"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Inserted dylibs"; o=; defaults read /Library/Preferences/com.apple.alf globalstate | grep -q 0 || o=On; Ps Firewall; o=`scutil --proxy | egrep 'Prox.+: [^0]'`; Pm Proxies; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^$.+$ //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{printf "not "; exit}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print}; /v6:/{if ($2 !~ "A") print}'`; Pm TCP/IP; [[ "$I" =~ [AW]i ]] && { o=`/S*/*/P*/*/*/*/*/airport -I | awk '/lR/{print $2}'`; o=$((o<=-87?o:0)); Ps RSSI; }; R && o=`sudo profiles -P | grep : | wc -l`; Ps Profiles; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc hosts <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "App check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`find .??* -path .Trash -prune -o -type d -name *.app -print -prune`; Pm "Hidden apps"; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font issues"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps UID; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Safari loads slow on Xtinity Comcast

Safari loads slow on Xtinity Comcast

Safari on the iPhone 4 has been slow for me since the 4.3 updates. My Safari speed was ffaster on 4.2. The Facebook app on the iPhone constantly crashes and is a disaster. You can't directly edit information on your profile, and I use Voice Over, and when I attempt to comment directly on a friend's status on that friend's page, the comment buttons don't work. I can't even read comments written on my own profile. I can only comment on the newsfeed. There is also no like buttons when you look at a friend's status on that friend's wall. The app has crashed numerous times and has some major bugs. You are better off using Safari or the facebook app on the iPod Touch because for some reason, the app works better on the iPod Touch.

Safari loads portable web page

Since updating to Yosemite and Safari8, occasionally Safari loads what appears to be the portable web page rather then the desktop version. This displays the web site as a very oversized page. The only way I can recover is to restart safari, logging onto the same site as before now works OK. Is anyone else seeing this happening?

From the Safari menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data...
and confirm. Test.

I'm hooked up to the ethernet using DHCP with manual address. It's running (green) but my internet (Safari, messenger, email) doesn't work! Help!

I'm running an iMac with Mountain Lion. Not only do we do accounting work on this computer with AccountEdge, but the computer functions as a server to another computer in a different state.
Anyway, I set a static IP address (Using DHCP with manual address) on it (to allow for a VPN to the computer in the different state) and it is connected (green dot) - meaning that the other computer in the different state can connect to us via that ethernet line - but for some reason Safari, Messanger, and Apple Email won't work.
But if I switch a dynamic IP (DHCP auto), I can use the internet (Safari, messanger, email), but the computer in the different state can't connect to this computer.
How can I fix this so that the computer in the different state can connect to this computer and that the internet (Safari, messanger, and email) can work at the same time?
Much thanks!

No but if they are using a VPN Tunnel for the connection that restricts all internet traffic over the tunnel. Which means you can't use that same computer to broswe the internet or connect to other computers or devices on your LAN.
I'd need to see the actual setup, router and the IP addresses you are using.
Networking and remote networking is fairly easy when you are in front of the systems you are working on. Doing it over the internet on a forum is almost impossible. Tha is why I suggested you get local help, like the person that originally set it up.

HT4623 Opening multiple tabs within Internet Safari on my iPad mini

How am I able to open multiple tabs within Internet Safari on my iPad mini?? I have an iPhone and I can do so but on my iPad mini I can't figure it out or it just doesn't have that option. Someone please help with some answers, thank you!!

Thanks for your response, that's exactly what I thought the + sign was for but I've tried that and when I do it completely closes out safari. I did some other research and it seems to be happening to others also. So not sure what to do now or how I can get multiple tabs opened just like you can on the iPhones.

Internet/Safari load trouble since ugrade (10.4.4)

Similar Messages

Maybe you are looking for