Internet service outage in Shipbottom NJ

Is there an Internet Outage in Shipbottom NJ area today?

I'm in the same boat outage since thursday, they said it would be fixed in 8 hours, after that 24 hours after that 2 days, now it's 2 more days. At this point it is completely unacceptable, juast t ell me from the begining we have no ETA and I would have been happy, but now I guess i am going with clear.
Edit: I live in Lancaster, PA

Similar Messages

  • Startup hangs at "Waiting for Internet Services"

    I have a Quicksilver 800 and after a power outage when I tried to restart my Mac the startup hangs at "Waiting for Internet Services" and will not get to the login window. I ran a disk repair, permissions repair, and ran Disk Warrior with no luck. I'd appreciate any help you can give.

    William, welcome to Apple Discussions.
    Will it boot from your system CD?
    Is the Startup Disk set to start from your HD or a Network?
    Many times after a power failure, the Mac won't startup & you have to do a PMU reset. See Mac PRAM, NVRAM, CUDA/PMU & Battery Tutorial
     Cheers, Tom

  • Internet Service Down?

    Anybody know if the internet service is down in Portland Oregon?  I know they are doing testing on our 4G network here so they can roll it out this summer but 3G isn't working and even 1X is barely coming up.  Also, anybody else have problems with the Thunderbolt randomly dropping internet for no reason and then mysteriously comes back up?

    It appears that there are outages nationwide since early this morning.
    I don't there is any official word from Verizon about the outages, but if you check some of the threads in this forum, there are some solutions posted that may help you reestablish data connection (at least 3g anyways).

  • I cannot receive email properly now. When I open mail, it says that is downloading about 1,700 emails. At the very end, it gives me my newest ones. But this takes a long time. I've contacted the Internet service provider and verified all the right setting

    I cannot receive email properly on either my IPad or my IPhone. I have had them for over a year and they have always worked fine. Until three days ago, when they both started acting up. On the IPad, when I open mail, it says it is downloading about 1,700 emails. At the very end, which takes quite a while to get to, I finally get the most recent ones. The IPad is sending emails just fine.
    On my IPhone, when I open mail, it says it is downloading 100 emails, but it doesn't do that. And it gives me no new emails at all. The IPhone is sending email just fine.
    I have already deleted the email accounts on both devices and reinstalled them. I've contacted the Internet service provider and verified all the right settings. The Outlook email on my desktop is working perfectly.

    WMV is a heavily-compressed format/CODEC, and the processing time will depend on several factors:
    Your CPU, which is not that powerful in your case
    Your I/O sub-system, which is likely a single HDD on your laptop
    The source footage. What is your source footage?
    Any Effects added to that footage. Do you have any Effects?
    Each of those will have an impact on the time required.
    The trial has only one main limitation - the watermark. Now, there are some components, that have to be activated, but are not with the trial, but they would be evident with Import of your source footage, if it's an issue.
    Good luck,
    Hunt

  • Message uses a character set that is not supported by the internet service

    Does any one have any advice on how to fix this problem?
    E-mails sent from my iphone 3G periodically arrive in an unreadable form at the recipient. The body of the e-mail has been replaced with the message "This message uses a character set that is not supported by the internet service...." The problem e-mails also include an attachment that contains an unformatted text file containing the original message surrounded by what appears to be lots of formatting data that is displayed as gibberish.
    This occurs sometimes, but not always, even with the same recipients. I am sending e-mail through a G-mail account that is configured on the iphone using IMAP. I have tried the gmail account to use the two available formatting options for mail, but neither fixes the problem.
    I have also upgraded to 2.01 and restored a few times without impact.

    Hi,
    I got somewhat similar problem with special charecters(German umlaud �,�,�..).
    I create a file with java having special charecters in it. Now if I open this file I am able to view the special charecters in it.But If I attach this file send it using following code then receiver can not see the umlaud charecters in it.They get replaced by _ or ?
    MimeBodyPart mbp2 = new MimeBodyPart();
    FileDataSource fds = new FileDataSource(fileName);
    mbp2.setDataHandler(new DataHandler(fds));
    mbp2.setFileName(output.getName());
    Multipart mp = new MimeMultipart();
    mp.addBodyPart(mbp2);
    msg.setContent(mp);
    Transport.send(msg);
    From you message it looks like you are able to send the mail attachment correctly(by preserving special charecters).
    Can you tell me what might be wrong in my code.
    I appriciate your efforts in advance.
    Prasad

  • BlackBerry Internet Service with Microsoft Outlook Web Access account

    I need to switch my 8820 to a new work account.  They use Outlook Exchange 2003, but do not support BES.  I have access via both regular desktop Outlook and also Outlook Web Access (from a different server).   I read the procedure to use BIS in KnowledgeBase KB03133.  After entering my email address and password, I get a message that it was successfully set up.  But, I get no e-mail messages delivered.  When I check  the settings, it looks like it is not using the correct server for Web Access.  However, I can find no way to manually enter it - I don't get the error message described in Step 5 where I can pick "I will provide the settings."  I try to set up via computer but I get a message that my BIS cannot be accessed via HTML and need to set up on my BB.
    Any suggestions?  Would it work with a newer phone running a newer OS?  Do I need to check with AT&T if it supports Outlook Web Access?  Thanks in advance.

    Hi and Welcome to the Forums!
    Lot's of possible variables...here a several other KBs to try:
    KB03133How to integrate a Microsoft Outlook Web Access email address with a BlackBerry Internet Service account
    KB18567BlackBerry Internet Service cannot connect to a Microsoft Outlook Web Access account using Microsoft Exchange 2007 or Microsoft Exchange 2010
    KB15173Locate the mailbox name for a Microsoft Outlook Web Access 2007 email account
    KB04804Error message appears when attempting to integrate a Microsoft Outlook Web Access 2010 account
    KB02858Unable to integrate a Microsoft Outlook Web Access email address with a BlackBerry Internet Service account
    The trick to getting to the manual settings screen is to provide your valid email address, but an incorrect password...then, it will allow you to manually enter the settings.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • HT1923 In trying to delete the Apple file in the Program/Common File I can delete all contents except the Internet Services folder.  Thus preventing me from deleting the Apple FIle.  Error message says I need permission to delete this file.  How do I proc

    Trying to delete the Apple Folder from Program Files/Common Files.  I can delete all the contents except for the Internet Services folder which prevents me from making the deletion.  The error message says "you need permission to delete this file".
    Discovered this problem when trying to upgrade from my 3G iPhone to a new 5S iPhone unsucessfully.

    See note 3 of Troubleshooting issues with iTunes for Windows updates.
    tt2

  • How to open and modify a internet service.

    I want to modify Internet Service PZ02. I checked in SICf, it is listed under bc/gui/sap/its and is also activated.
    But when i go to SE80 and search for it in Internet Service, i get a message saying "Service PZ18 does not exist, create object? "
    How do i open, get access to code of pz18 and modify it
    Thanks
    Sharath

    Chris-
    Thanks for the reply.
    How do i create the ITS service (service file, template, theme etc..) out of the dynamically generated HR service PZ02.
    Pleae let me know if the following steps are correct
    1. In SE80, Choose Internet service and enter a name like zpz02.
    2. In the pop-up for transaction code enter pz02. Check the box for ITS mixed mode
    3. Then Right click in zpz02, select create->template->
    assign theme=99,
    program number-SAPMPZ02
    screen number=1000
    generating style=webgui
    ( The above informtaion was found out in the following way: go to se93 -> enter pz02 as the transaction code ->
    click display.
    When i did that it displayed the following info
    program : SAPMPZ02
    selection screen: 1000 )
    When i click on save it says that the screen 1000 does not exist in the program SAPMPZ02.
    But from the info that i got from the SE93 it looks like the screen number is 1000??
    What is the mistake ?? Is the approach wrong
    Help will be really appreciated
    Sharath

  • Problems setting up email + understanding Pin and BB internet service

    Hi,
    I've been browsing for answers about my new black berry 9700.
    When I try to set up my email on the phone it says. "Your email account is already activated for enterprise use."
    I have no idea what that means.
    I brought the Blackberry pretty much brand new, it was used for like a day.
    the problem with that is I've never had a blackberry before and I don't know anything about setting up the email, blackberry internet service, enterprise, and the pin system.
    Also, the other problem is that there are two icons for internet; Browser and WAP. I just want to connect to the internet via my wireless internet and not get charged, and want to know if I am getting charged.
     Please help.

    Shoulda done some reasearch first:
    Using your WiFi router to connect to your 9700, you can use the WiFi hotspot browser ONLY to connect to the internet. You will NOT be able to use the RIM push email, Facebook app, BlackBerry Messenger, Maps, etc.
    You MUST have the BlackBerry Data Plan on your service provider account for that.
    Go to Options > Advanced > Browser and save that to HotSpot Browser.
    Meanwhile, at Manage Connections, search for and connect to your WiFi router and you're set to go for the limited use you'll have.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • ITServer - Internet Service created by us not working in SAP ECC

    Hai all,
    We have SAP R/3 4.6C and a ITS server 6.1. We created some Internet service and published in our ITS server.
    We have ugpraded our system to SAP ERP Central Component 5.0, which has inbuilt ITS server. I published the standard SAP internet service "BWSP" and our own internet services.  The problem is standard SAP Internet Service is working whereas the the internet service which we developed is not running.
    Before publishing i did the following settings, Utilities => Settings => Internet Transaction Server, in the "Test Service" tab i have selected "Default Web Server" radio button and on "Publish" tab i have selected "On All Defined Sites".
    I published the service by selecting Publish =>Complete Service by right clicking on the service name.
    When i execute the service using ITS url i am getting the following error
    Service cannot be reached
    What has happened?
    URL http://devnw2.xy.gov.sg:8000/sap/bc/gui/sap/its/ZGEESIS001/! call was terminated because the corresponding service is not available
    Please let me know what's wrong and what is the solution to correct it.
    Regards,
    Basha.

    Hai Raja,
    I tried adding in the entry as below.
    The below value i just copied from the service BWSP and put it here and changed the transaction code.
    ~TRANSACTION     zgeestc017
    ~THEME     99
    ~COOKIES     1
    ~DESIGNS     sap_streamline
    ~RUNTIMEMODE     pm
    ~DISCONNECTONCLOSE     0
    ~FLICKERFREE     0
    ~URLIMAGE     /sap/public/bc/its/graphics
    ~URLMIME     /sap/public/bc/its/mimes
    ~URLARCHIVE     /scripts/sapawl.dll
    ~GENERATEDYNPRO     1
    The below is the full error which i got when i tried to run the service after doing the above change.
    What has happened?
    URL http://devnw2.abc.gov.sg:8000/sap/bc/gui/sap/its/ZGEESIS001/! call was terminated because the corresponding service is not available.
    Note
    The termination occurred in system D00 with error code 404 and for the reason Not found.
    The selected virtual host was 0 .
    What can I do?
    Please select a valid URL.
    If you do not yet have a user ID, contact your system administrator.
    ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:devnw2_D00_00-v:0-s:404-r:Notfound
    HTTP 404 - Not found
    Your SAP Internet Communication Framework Team
    Regards,
    Basha.

  • I recently upgraded my internet service to be faster on myIMac tiger 10.4.11 and that lasted about a day. Now not only do I get TBBFH but even opening up let's say Face book it loads very slowly . It's not the BBFH but next to the facebook it's a circle o

    Even when I am using Safari or Firefox  the spinning wheel of lines especially for face book just keeps spinning and it takes forever to load my pages. It was faster than this before I upgraded my internet service. I Check the speeds and those are fine (using a internet speed test). I have emptied all of my caches, cleaned my Mac with (Clean My Mac), I've taken out all old files, pictures, cleared my widgits, and I don't know what else to do. Is there some configuration I need to address some where inmy preferences? Do Ihave to just live with it? I do want to upgrade to Snow Leopard but, I can't afford that at this moment. Any ideas please forward. Another issue I have is that my IMac will not accept a DVD+Rdl but will accept any and all other DVD' and CD's what could cause that?
    Sincerely,
    Rochichi98

    A warm welcome to Apple discussions!
    A 2003 iMac cannot support Snow Leopard 10.6; you'd need an Intel processor and that cannot be retrofitted to your Mac. What does "About this Mac" in your Apple menu say  for your processor speed? What does it say about how much RAM you have?
    If the processor is 1ghz or faster, you can run OS 10.5; otherwise, you are maxed out at 10.4.11.
    Also, are you running any commercial ("pay for") anti-virus or security software? They are notorious for slowing most Macs to a fraction of their speed potential.
    A too-full hard drive can drag down performance, especially if you don't have a lot of physical RAM installed. If you single-click your hard drive icon and then do command i, you'll see the disk usage. Looks like this:
    The value for "Used" should be no more than about 90 percent of "Capacity." In the example image, that drive has about 34 percent of its space used and 66 percent free--more than enough. Please post what you see for your Capacity and Used numbers
    There are a few more things we might check but this is a good start.
    Awaiting your information,
    Allan

  • How to replace ENTERPRISE Server Option by BB Internet Service Option?

    On my 8700 there is the ENTERPRISE Server option installed.
    As I want to vsend and receive emails from different email account without making use of the BB Enterprise geature I would like to get rid of the Enterprise-program installed and replace it by the Internet Service option.
    I wonder whether this would be possible.
    Can I replace Enterprice feature by the normal Internet Service?? and how?
    Thank you for any information
    Solved!
    Go to Solution.

    Hi there!
    The options you are presented with when you start the email configuration wizard are controlled by virtue of the account type you have with your carrier. Given what you describe, it sounds as if you have perhaps on a generic data plan (or perhaps no data plan at all) -- that is normally not sufficient to grant you access to the Blackberry Internet Service that is hosted at your carrier. To enable Personal Email configuration, you must contact your carrier and request what is often (thought not universally) called The Blackberry Data Plan. Whatever it is called, you need a plan from your carrier that grants you access to the enhanced Blackberry services that they host - and you must pay them to access those enhanced services. Once you have that proper account, you will have Personal email as a configuration option (note, though, that Enterprise will not be "replaced"...rather, Personal will be added to the screen).
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Verizon Blackberry Internet Service Client (BIS)- How to create an e-mail Filter

    Hello. Thank you in advance for replying to my question. I am trying to create an e-mail filter so that a contact's e-mail messages do not get delivered to my BB and instead just go straight to my regular e-mail account. I understand that you can do this function from the BIS, however when I tried to create an account I received a message that said "please use your device to access the BIS." I did just as the message told me but I did not get the same menu options from my BB as I would have gotten from doing it from the internet. The page only showed a list of my e-mails and an "edit" and "delete" choice for each one. There was no "Filter" button for me to click. I remember a while ago I able to access this page and was able to remove the BB signature (i.e.. "This message is being sent from a BB"), so I know that it was possible to access this page. I do not know why I am not able to accesses it now.               
    If anyone out there has Verizon and knows how to access the BIS, please let me know how. Or if you know how to create an e-mail filter function, please let me know.
    Thank you,
    Fred
    Solved!
    Go to Solution.

    Hi there!
    To log into your BIS account from a PC/browser (not the BB browser), go to this URL:
    https://bis.na.blackberry.com/html?brand=vzw
    Enter your BIS credentials and you will then be in your BIS account screen. From there, use this KB to create the filter you desire:
    KB04558 Add a filter to a BlackBerry Internet Service account
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • I have had constant problems with my Verizon broadband internet service, and can only assume I will need to cancel my contract.

    According to Verizon, my family is somehow using 15 to 16 GB of data per month on our unlimited data plan, sometimes more. This is a jump from 4 to 6 GB in the spring of 2012. We have done nothing to justify such a huge surge in data usage per month, but I don't seem to be able to get any satisfactory answer from Verizon as to what's going on. Our time spent on the Internet is no different than it's ever been. Last month, customer service tried to suggest that a virus we had had on one of our computers must have caused the computer to suck up data without our knowledge, but the virus is gone and our data usage just keeps getting worse. To make matters even more painful, such high "usage" causes Verizon to slow our UNLIMITED data service to such a snail's pace that we can't get anything substantial done online. And, for some reason, we now constantly lose our signal. We are connected via USB, which is a poor way to connect, granted. But it worked fine in the spring of this year. In fact, it was faster than anything we had had previously. Go figure? I tried to download Java last week, and the computer indicated it would take 15hrs to download. What a waste!
    Apparently, my only option is to switch to MiFi (we are in a rural location lacking DSL) for my household. And this will cost me at least $60 more per month. Why, pray tell, would I want to pay more money to solve a problem that Verizon cannot satisfactorily explain to me if there are no guarantees MiFi will work any better? I cannot get my money back if it fails to improve our situation. And what about the supposed data usage? Am I supposed to believe that my kids' Facebook time combined with our internet surfing eats up 3 to 4 times as much data as it did only a few months ago? I don't think so. Something is not adding up here. Oh...I do have one other option. Home Fusion broadband added to our account for even more money per month.
    Bottom line? Spend more money that I don't have for unreliable service, with what I believe to be bogus data usage charges. I think I just need to cancel Internet service, paying the fee for breaking my contract of course, and take my business elsewhere.
    Anyone else having these sorts of problems? What have you done about it?

    Regardless with what carrier your with you might have the same issue, My recommendation would be to get a router that will help you with viewing live traffic and keep a tally of your usage and any device connected to your internet connection.  You can go with the peplink balance 20 and be able to look at your traffic by the hour, daily, weekly, monthly or yearly.  Look for trends, see what computers or devices are doing what I attached a screen shot so you can see an example of mine.  You can purchase the router at 3gstore
    http://i45.tinypic.com/6zc674.jpg

  • How to call a sap transaction in Internet Service

    Hi,
    I have a requirement to call a sap transaction code in the Internet Service. By donig this, the SAP transaction will be called in the web browser via ITS.
    Internet Service has HTML Templates - inside html templates I want to call the sap transaction based on a button event.
    Below is the transaction code. When I enter below link in the browser then it works fine. The same I need to call progrmatically in html template on some event.
    http://xxxxxxxxxxx/sap/bc/gui/sap/its/webgui?~transaction=me23n
    Thanks,

    Hello Sal.
    This does not look like an ABAP issue, but rather JavaScript, JQuery or whatever you are using to handle the button-click-event in your "Internet Service" web application.
    You might try window.open("http://xxx...me23n","_self").
    Best regards,
    Frank.

Maybe you are looking for

  • Why can't I receive a fax on my MacBook Pro?

    I have just purchased an Apple USB modem to be able to use the fax software that came with my new MacBook Pro. I sent a fax to Japan - no problem - it went fine and was received. However, I was not able to receive the reply. The incoming fax was not

  • Windows vista laptop won't recognise ipad 2 for setup

    my laptop has identified that I plugged an Ipad 2 in and found the drivers (aparently) but ITunes does not show that the ipad is connected???? I need to set up via ITunes......any ideas???

  • Email password

    Increasingly over the past weekor so my email client (Mac Mail) and my wife's email client (Windows Outlook) have started asking for our email passwords to be entered in order to send emails.  Sometimes this has to be repeated for twenty or thirty ti

  • Function and Mouse Shortcut Keys for Exposé Reset Frequently

    I have been noticing, recently, that my keyboard and mouse shortcuts for exposé and dashboard reset almost every day. It happens most frequently after I run World of Warcraft or fullscreen with VLC (which I have set to use the first 5 function keys b

  • Why can't I scroll down on windows of certain sites? Like the new BMO site!

    Why can't I scroll down on windows of certain sites? Like the new BMO site!  Please help, I'm going crazy!