Internet service through hughes net trouble accessing internet since upgraded McAfee software

08.04.2015 To whom it may concern: I originally had Hughes install their service in April 2014 shorty after I purchased my new HP computer with operating system windows #7 with service pack #1 and McAfee Anti-virus & firewalls software unlimited protection already installed on my computer. I had no trouble in the year 2014, but in late part of June 2015 after updating McAfee software I started to have problems connecting to the internet. I went so far to have McAfee re-install their software & check the IP addresses on the firewalls for internet connections - - COULD THIS BE THE PROBLEM? I have checked Hughes system status and I have noticed a continue problem on the status reading of TuboPage reading status has being showed as "IDLE" instead of "UP". Per Hughes the TuboPage feature provides acceleration for web browsing. Acceleration is achieved - - per Hughes - - by the terminal establishing connections to one or more TuboPage servers. Now, may I also mention when I go to the TOOLS nab then to INTERNET OPTION then to CONNECTION nab then to SETUP - - it shows I'm connected to the internet, but when I press the button "BROWSE THE INTERNET NOW" - - nothing happens - - WHY IS THIS? Thornton1960

I am having that same problem. Used to connect up with my home's wireles network (Linksys wireless cable router, Toshiba cable modem). The lapotops are working wiressles, but the Touch doesn't seem to be able to connect either to my wireless network or to a neighbor''s unsecured network that I used to be able to log onto.
I did travel and used the Touch to connect to other wireless networks. Since returning, nothing. I have reset all settings, reset network settings, restored to factory settings... nothing seems to help, still hangs up on the "Choose a network". I was hoping that restoring to the factory settings would work... it even prompted me for the WEP key, but still just hung there.
Thoughts? Do I need to go to the Apple STore?

Similar Messages

Since upgrading the software on my iPhone 3GS to the iOS 5 i have not been able to sync my iphone. It is not my internet securtity causing the problem, I have just downloaded service pack 3 for windows XP and i have uninstalled and re installed itunes! ?

Since Upgrading the software on my Iphone 3GS to the iOS5, I have not been able to back up my on my laptop, it starts syncing then kicks me out.
I have uninstalled my internet security and that is not the problem (so re-installed)
I have updated the Windows XP to service Pack 3
I have un installed and re installed iTunes as well
And none of this has worked!
I was going to upgrade my phone to the iPhone 4S but dont feel i can now as worried it wont sync.
Please can anyone help me as this is rather frustrating now!
Thanks
Morris1979

***, a text I tried to send but saved,chops up and pastes in the forum question in my attempt to reach out for a technical resolve of my phone, not my heart. Hahaha.

I have not been able to stay connected to Internet since upgrade to os 7. Other devices no issues just iPad 2. HELP

I have not been able to stay connected to Internet since upgrade to os 7. Other devices no issues just iPad 2. HELP, please and thank you.

Hey Elder25,
I would troubleshoot these Wi-Fi issues you're encountering while using your iPad by following the steps in this link:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
Welcome to Apple Support Communities!
Regards,
Delgadoh

Cannot access iphoto: Cannot access iphoto since upgraded to OS X Yosemite. Following the message to use the library upgrader is getting me no where. I followed the install prompts and still cannot access my own photos. Very frustrating. I've tried 5

Cannot access iphoto since upgraded to OS X Yosemite. Following the message to use the library upgrader is getting me no where. I followed the install prompts and still cannot access my own photos. Very frustrating. I've tried 5 or 6 times already and end up with the same result. NOTHING...
Library Upgrader IS NOT WORKING. Please help

Thx Leonie,
Surprisingly, I just went to the crash reporter and there were no reports re: the iPhoto issue. This is the only report I found, which I not sure is related to the iPhoto issue:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>OSBuild</key>
<string>10.10.2:14C109</string>
<key>appRecords</key>
<array>
<array>
<string>AppRecord</string>
<string>DiskImageMounter</string>
<string>com.apple.DiskImageMounter</string>
<string>396</string>
<string>10.10.1</string>
<integer>7</integer>
<integer>0</integer>
<integer>1</integer>
<integer>0</integer>
<integer>0</integer>
<integer>0</integer>
<integer>0</integer>
<integer>0</integer>
</array>
<array>
<string>AppRecord</string>
<string>com.apple.ncplugin.weather</string>
<string>com.apple.ncplugin.weather</string>
<string>32.3</string>
<string>1.0</string>
As for the TimeCapsule indeed, I use it as an extended drive but I'm surprised it would be considered a FAT-32 formatted drive as this is an Apple device.
I asked the apple reps if I could use the TimeCapsule for such purpose and no one raised a concern. It's also surprising that I didn't have an issue with this prior to the upgrade to OS X Yosemite.
Having said the above, thank you for your help - if the TimeCapsule is indeed the issue, perhaps I can solve the issue by transferring the iphoto library to an OS extended hard drive.

Trouble opening programs since upgrading to yosemite

I am having trouble opening programs since upgrading to Yosemite.

CS 6 or Photoshop 6. CS6 is version 13, Photoshop 6 is super ancient history.
Either way CS6 should work in Yosemite but not officially supported by Adobe any longer.
Are you trying to navigate to a location that is not there like a disconnected drive?
Photoshop tries to remember the last location you opened from
close photoshop
open Macintosh HD:Applications:Adobe
find the Photoshop folder or photoshop.app inside the folder, wherever you installed it
hold down ctrl+opt+shift+cmd and click on the photoshop icon as you are holding these down
when the prompt comes up to reset preferences click okay
you can't do this from the dock icon or an alias btw.
if that does not work
create a new admin account,
boot to that account
run photoshop,
if it works there is a problem with your old account and possibly corruption.

Having trouble with wifi since upgrading to ios7

Having trouble with wifi since downloading ios7

I have had this problem on my iPad and iPhone 5 since the update in September. I called apple support numerous times, did all the troubleshooting, and went to the apple store and had both devices replaced under warranty. Nothing fixed the problem.
Then as a last ditch effort I called my internet service provider. Turns out that the ios7 doesn't seem to work on a wpa2 network and needs to be changed to a wep network. The tech did this over the phone and now both devices work normally connecting to my wifi! I am still nervous I'm going to run into more issues but so far so good.

Cannot access wifi since upgrading to ios5.1

I upgraded to IOS5.1 this morning. iphone 4S was fine, but ipad wifi did not reappear on completing the upgrade and when I enter my password, it says cannot access network. None of the details of the network are listed except for the DNS and I can't manually enter them. Anyone have any ideas or similar problems?

I'm seeing the same problem. Running iOS 5.0.1 both my original iPad and my iPad 2 were rock-solid on my WiFi network. Since upgrading to 5.1 neither device is able to connect for more than a few minutes. Device connects on a reboot or when resetting the WiFi settings but after a minute or two the network just disappears and the iPad says it's unable to connect. My iPhone 4 and 4S both work fine on the network with 5.1. This issue appears restricted to iPads.
Is Apple aware of this issue?

Microsfot Sync Services in Lion - isync problems - keep getting message that can't open application Microsoft Sync Services because PowerPC apps no longer supported since upgrading to Lion. what is this and how do I get rid of the message?

I keep getting message that i cant open application Microsoft Sync Services because PowerPC applications are no longer supported - what is this and how do I get rid of this?

Thanks- so if I remove the old apps that i no longer use then the message will automatically go away?

Access problems since upgrading

iPhone 3G Mac OS 10.6.4
Upgraded iPhone to IOS4, had problems like many others have reported: error -5000, "do not have enough access privileges" Did Restores, didn't help.
Found reference to removing "iPod Photo Cache" (I only found one), that took care of most problems, at least I can now upload music, photos, and Apps now.
But, I still get errors when it Syncs:
Attempt to copy to the disk "MyiPhoneName" failed. You do not have enough access provileges for this operation."
and
iTunes could not copy "RingToneName" to the iPhone "MyiPhoneName" because an unknown error occurred (-5000)
I'm sure these are related but don't know the solution. I can't load any ringtones, but can load music files.
Any insights out there?

I may have found a simple hack / workaround -- manually mounting the drive as afp:// instead of letting the default do whatever it's doing. Apparently Apple still supports AFP even if it's "migrating" to Microsoft for "security". It does seem that networking to the other mac works better if I by hand Go->Connect to Server then hardcode in afp:// before my machine name. Though it still seems slower than it was.

HT4972 Cannot access mail since upgrading my ipad2 to ios6

I just upgraded my iPad 2 but now I cannot get any of my emails. Any ideas of what I can do to fix this?

I'm sorry if not because I had the same problem on iPad 3
But now I enter the music or video app and download from iTunes

Trouble with FCP since Upgrading to Snow Leopard

I intentionally waited to upgrade to Snow Leopard to assure the bugs were worked out. Everything ran well on Leopard on my MacPro. Once I did the upgrade most everything has worked well. One very strange occurrence has me baffled and I hope someone here may have the answer. When I use the Audio Mixer in the program I notice that once I make an adjustment to a level then release the mouse, the audio plays for a moment then goes silent. Once I click on a slider again or hit the space bar to stop then start the playing of the track again, the audio returns until I adjust the sliders again. Anyone experienced this? Did not do this in Leopard. How might I fix this annoying problem.
Thanks,
Phil Hanna

When upgrading editing systems to new versions of the MacOS, it is always advised to backup your computer, or clone the current working drive, then erase it and install the OS and your applications from scratch. Upgrading the OS around your current working system, about 90% of the time, presents small issues here and there.
Shane

When will firefox support roboform? I have not been able to access it since upgrading.

When I upgraded to the current version of Firefox I received a message stating that '''Roboform''' was not compatible but that problem would be fixed.
Is there a timetable for this?

Firefox 8 fully compatible with Roboform '''7.6.5'''. Make sure that you have it?
* http://www.roboform.com/support/news

Why can I not load my Hughes Net email page, since updating Firefox?

I am able to load the Hughes Net homepage and now (since clearing cache) can get my email access to load to the homepage, however, when I click on my email access to load the email page, it goes to the page, acts like it is loading, says "done", but the email doesn't actually load. I am able to access through Safari...I'm stumped.

Sorry, I'm not following. I see the permissions options by opening View Page Info for a webpage, but that was not where I saw the choice to block the url. I can't recall how I accessed the option to do so. Since I can't get to the webpage that's blocked, I can't open the Permissions to change anything. If you are referring to another location, please provide instructions on how to get to it in Firefox 7.0.1. By the way, I can't get to the log in page via the mail icon today. Thanks.

Having trouble accessing internet with new wireless WRT54...

Having trouble accessing internet with new wireless WRT54G. Used easylink to read existing router BEFSR41 which works great to westell modem provided by Verizon. When connect new router Easylink configures WRT54G but when trying to connect to internet...fails. All lites indicate good. Not using wireless device yet, just the wired ethernet. Router set up as DHCP.
I keep going back to old router and works great every time. Help!

Thanks for response, however I tried setting unit to 192.168.2.1 (leaving DHCP) to no avail. I put my old unit (BEFSR41) back in and I'm back up. I need to sit back and decide which way to go on this. Perhaps it's defective and I should return it.

A connection to the QuickTime server could not be established. This computer may be having trouble accessing the Internet or the server may be offline

When I select “Update existing software in QuickTime Pro I get an error message saying “A connection to the QuickTime server could not be established. This computer may be having trouble accessing the Internet or the server may be offline”
This has persisted for several weeks. Any help will be welcomed as I do not know how to contact QuickTime support via Apple.
I am using Windows 7 64 bit.
Many thanks

I was able to download and install the latest version of iTunes (10.6.3.25) without a hitch. After the reboot I tried again to update my exisitng Quicktime Pro software as described in my original posting and got exactly the same error message.
If it happens that there is no software to download because I am already running the latest version, surely a message to that effect would appear and not the one saying “A connection to the QuickTime server could not be established. This computer may be having trouble accessing the Internet or the server may be offline”
Still seeking advice if possible
Cheers

Internet service through hughes net trouble accessing internet since upgraded McAfee software

Similar Messages

Maybe you are looking for