Internet Servies & IAC Iview
Hi,
I created an IAC Iview on Portal based on an Internet Service. I have configured SSO with the R/3 System. It is also working fine. Now when I preview the Iview, it shows up properly.But when I do it the second time, either it shows SAP Easy access menu or pages does not show at all. After restarting my portal, I again tried the opening the page. It came properly, I used the Menu> System> Logoff path within the Iview to Logoff. Now it is working for the second time also.
So, How do I avoid using the logoff option. I cannot expect the user to logoff after viewing each of these Internet Services. There are about 30 such Iviews based on Internet Services. I hope I made my question clear.
Any suggestions ?
Murali.
Hi
Do you mean, the System object - ITS properties.
It was <b>/sap/bc/gui/sap/its/</b>
I changed it to <b>/scripts/wgate/</b>
I got the following Error :
Service cannot be reached
What has happened?
URL http://<IP>:8000/scripts/wgate//ZMIGO/! call was terminated because the corresponding service is not available.
Note
The termination occurred in system RD1 with error code 404 and for the reason Not found.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:itdrd1_RD1_00-v:0-s:404-r:Notfound
HTTP 404 - Not found
Your SAP Internet Communication Framework Team
Please let me know what should be done to correct it.
Murali.
Similar Messages
-
Internet Services & IAC Iviews
Hi,
I created an IAC Iview on Portal based on an Internet Service. I have configured SSO with the R/3 System. It is also working fine. Now when I preview the Iview, it shows up properly.But when I do it the second time, either it shows SAP Easy access menu or pages does not show at all. After restarting my portal, I again tried the opening the page. It came properly, I used the Menu> System> Logoff path within the Iview to Logoff. Now it is working for the second time also.
So, How do I avoid using the logoff option. I cannot expect the user to logoff after viewing each of these Internet Services. There are about 30 such Iviews based on Internet Services. I hope I made my question clear.
Any suggestions ?
Murali.hi,
Description
Enables / disables the SAP Easy Access menu immediately after logon if no transaction is specified when running the SAP GUI for HTML.
If ~webgui_easy_access_menu is set to 0 or it is undefined and no value is specified for ~transaction, users logging on to the SAP GUI for HTML see the initial SAP screen without the SAP Easy Access menu. To display the SAP Easy Access menu, they have to request it explicitly by choosing Start SAP Easy Access.
If you set ~webgui_easy_access_menu to 1 and no value is specified for ~transaction, users logging on to the SAP GUI for HTML see the initial SAP screen with the SAP Easy Access menu immediately.
Set by
Service file webgui.srvc .
Values
0
Displays the initial SAP screen without the SAP Easy Access menu after logon to the SAP GUI for HTML, if no transaction is specified (default).
1
Displays the initial SAP screen with the SAP Easy Access Menu after logon to the SAP GUI for HTML, if no transaction is specified.
Example
~webgui_easy_access_menu 1
Try using this service parameter in your internet service file and let me know
You can also view other parameters in the following link:
http://help.sap.com/saphelp_47x200/helpdata/en/24/ef243a84da356be10000000a11402f/frameset.htm
Regards,
Manish -
Unable to call Internet Service from EP IAC iview
Hi.
I'm trying to call a r/3 transaction with ITS from portal iview. I wan't to hide menu and toolbar, so I've created an Internet Service in SICF/SE80 with several parameters (webgui_simple_toolbar, ...). The service is activated and published. When I run it, Internet Explorer send me a 403 error.
I've tried to create an iac iview and links the service to it, but system return same problem.
ITS is ok, because I can run r/3 transaction from EP whithout any problem.
Any idea?
Thanks a lot!Hi Edgar.
Service doesn't run from R/3 system. I've used ITS parameters "TRANSACTION", "WEBGUI", "WEBGUI_SIMPLE_TOOLBAR" and "GENERATEDYNPRO".
R/3 can't run the service and give a 403 error.
Service is actived and published, using SICF and SE80 transactions. Finally, I've run SIAC_PUBLISH_ALL_INTERNAL and all is good.
When service runs on R/3 system, I will build IAC iView on EP.
Any idea?
Thanks a lot.
Regards -
Hi all,
Can anyone tell me the difference between SAP miniapps iview and IAC iview in Enterprise Portal 6.0.
Regards
VasuHi Vasu,
Miniapps is the old name for portlets (iviews) from SAP's Workplace portal. IAC's (Internet application component) is another type of portlet that were developed to run with SAP's Internet Transaction Server (ITS).
Most of SAP's early portal applications were Miniapps or IACs. Most can still be used with EP6.0 portal systems.
Hope this helps,
John -
F4 help is not working in IAC Iview
Hi,
There is IAC iview for transaction PA61
F4 help is not working for the iview
it workes in backend SAP PA61
kindly give any hints what can we check
thanks in advance
bHi,
This might be due to the JRE version of the browser. We faced such issue and the update of JRE version in the browser helps to get the pop-up of F4 help. Check in the internet broswser Tools -> Internet Option -> Advanced. Check whether the JRE applet is checked or not. it has to be checked. if it is checked and even if you dont get the F4 help, upgrade the JRE version.
Thanks,
Mahendran B. -
Dear All,
We are trying to create IAC iviews but getting error.
Environment details:
OS: AIX 5.3
DB Oracle 10.2.0.2(UC)
Application EP7.0 (SPS14)
Backend ECC 6.0 SR3
We followed the below mentioned steps:
01) Created one Internet Service ziactest in se80 with the parameters -
~transaction = tcode and ~generatedynpro = 1
02) Published the 'complete service' to the site INTERNAL.
03) Created one sub element under /sap/bc/gui/sap/its as ziactest
04) Modified the service ziactest as :
- specified "GUI Link" = Yes
- specified following GUI Configuration parameters:
~WEBGUI = 1
~SINGLETRANSACTION = 1
~NOHEADEROKCODE = 1
~TRANSACTION = tcode
~GENERATEDYNPRO = 1
- specifed handler as CL_HTTP_EXT_ITS
05) save & activated the service
When trying to test the service, we are getting a script error "Error on Page": wgu_global_eventhandler is null or not an object and the page displayed - is getting distorted . Also, system is specifying that: "The URL
http://gcbeccd:/sap/public/bc/its/mimes/system/page/menubase.html was not called due to an error."
When tried directly with the above url, the following error is getting displayed:
"The following error text was processed in the system RD3: The theme extracted from PAGE/MENUBASE.HTML has more than 2 characters."
Please note that: The SAP GUI for HTML has been configured and working properly. Also, the SAP note 790727 has been applied to resolve this problem but no result.
Any help in this regard will be highly appriciated.
Thanks & Regards
SudipHello Sudip,
If the webgui service is working then there should be no reason for this to not work. By specifying ~webgui 1 you're actually not using any template you've created for the ziactest service. The URL should be:
http://gcbeccd:/sap/bc/gui/sap/its/ziactest
Please also try:
http://gcbeccd:/sap/bc/gui/sap/its/webgui?~transaction=tcode
Please also publish the IAC, WEBGUI and SYSTEM Internet Services from SE80 to the Internal ITS.
You should look at the developer trace (dev_w#) for the Dialog Workprocess that is used and reporting the error for more information.
Edgar -
MSS Absence Report PT64 not working via IAC iView
We have a problem with MSS regarding the PT64 Absence Report. If we invoke the report via SAP GUI it produces a report using the correct date criteria specified.
If we invoke the same report through MSS business package v 60.1.4 on EP6 SP2, the Selection Criteria iView delivered in the business package launches a new window to display the report using an AppIntegrator IAC iView and generates a URL as follows:
http://server/irj/servlet/prt/portal/prtroot/pcd!3a!2f!2fportal_content!2fcom.sap.portal.migrated!2fep_5.0!2ftemplates!2fcom.sap.portal.appintegrator.sap.bwc.IAC?System=SAP_R3_HumanResources&SAP_IAC=hrwpc_fc_exec&SAP_QueryString=S%3DZMSS%26F%3D*HISRETABS+5%26B%3D18000101%26E%3D20050901%26V%5B1%5D%3DZRPT_D1%26O%5B1%5D%3DP00003582
The report ignores the date criteria passed from the MSS iView. I can see in the URL above that the URL contains the dates I specified in MSS (start date=18000101 and end date=20050901).
So I assume that either the URL is wrong or that PT64 or ITS is incorrectly interpreting the URL?
Problem is, how do I know what the URL is supposed to look like?
And if ITS or PT64 is incorrectly interpreting the URL query data, how on earth do I investigate or debug this.
Cheers,
SteveHi all,
I am having the same problem, only I am not able to see any reports, the link appears ok but the screen opens up empty.... Any ideas ??
Regards,
Paulo Poinha -
Dear all,
We have an IAC iview which uses the internet service BBP_POC in SRM. This service is to display purchase Orders. When we want to display the versions of a PO, the iview triggers another Internet service BBP_POC_DISPLY. But we are getting an error message that the service is not available:
URL http://<host>:<port>/sap/bc/gui/sap/its/BBP_POC_DISPLY! call was terminated because the corresponding service is not available.
If we observe the above URL, it has '!' at the end. It shoudl instead have '/' or noting at all. But how do we correct the error, since this call happens dynamically by the internet service BBP_POC. There is no iview created for the second service in the portal.
Nny inputs are welcome.
Thanks a lot.
Ramya.More info:
If i create an iview out of BBP_pOC_DISPLY, and execute it .. it gives me the message "interface contians errors". This might be because it uses the source of BBp-pOC. ANyidea if this error is linked to the previous error " service not available?
Thanks a lot.
Ramya. -
Exit/Help link on IAC iViews
Hi,
I am displaying a report created in R/3 system on the portal using an IAC iView. I am able to see two links - Exit and Help at the Top left corner. How can I remove them from the iView.
I also came across few ppl mentioning to modify the templatelibrarybasis.html file located in the server on the ITS AGate instance under c:\program files\sap\its\6.20\DEV\templates\system\dm\templatelibrarybasis.html.
Any suggestions
Thanks,Hi,
You can hide these buttons and all ITS service toolbars using ~webgui_simple_toolbar parameter on your service. It's a 8 bits binary parameter. Bit 3 controls help/exit buttons.
Look this wiki:
http://wiki.sdn.sap.com/wiki/display/HOME/Article-EmploySAPGUIforHTMLinsteadofanInternet+service
Hope this helps,
Iván. -
How to eliminate Exit and Help links from IAC iviews....
Hi All,
How to eliminate the Standar Exit and Help links from the IAC iviews. i used webgui_simple_toolbar also but it didn't work. Is there any other way for getting rid of these links.
Thanks & Regards,
RaviHi Barin,
I'm facing the same issue, i.e I've created IAC iview which display spool request(SP02). Now I want to hide title, menu in the iview. Could you please give me some info about creating templates in internet services.
Regards
Anand -
Difference between IAC iview and Transaction iview
HI Experts,
Difference between IAC iview and Transaction iview................
Higher points will be rewarded for useful inputs.......
Thanks in Advance,
ShakthiHi Shakti,
Transaction Iview is to navigate to required transaction eg se80 etc of backend ,it can be used for various purpose for eg to test weather SSO is properly configured or not if yes Transaction Iview should navigate user to mentioned transaction in the iview with out asking for user id and password.
and IAC Iview is Internet Application Components
please go through this link
<a href="https://service.sap.com/~sapidb/011000358700000473342002E/">check</a>
Internet Application Components(IAC) are complete business solutions for linking mySAP.com components to the Internet. With IACs users can access business information in mySAP.com components by starting SAP transactions, function modules or reports from a Web browser.SAP IAC is a productive way to programm to prgramm backen transactions in html
for creation of IAC Iview ckeck this link.
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/5a/6898dddb7afd44b07ca4e3bb15f676/frameset.htm.">creation of IAC IVIEW</a>
Hope this works
Please allot points if helpfull.
Regards
Vinit. -
Portal Theme for IACs iViews (ITS Theme Generator)?
Hi guys,
it's me again I got another question / issue (i didn't post it at the other thread, cause this is another issue):
We deployed the SRM BP 5.0 to the Portal EP 7.0 SP14 and now i want to change the look and feel of the SRM iViews.
I allready customized the Portal Theme via the "Theme Editor".
But the IACs iViews are staying SAP standard.
I got the hint to use the ITS Theme Generator, so I did. But now i come to the point where i am trapped:
I specified at the ITS Theme Generator the following entries:
The ITS URL : <ITS Server>:<port>/sap/bc/gui/sap/its/
UserID : ####
PW: ****
Service: bbpsc02
Theme: MyTheme
Then the new page opens and the transaction is displayed. At the upper side the transaction is previewed. at the lower side the images of the transaction is displayed.
AND Now here comes the big Questionmark:
How do i change e.g. the background color of this transaction or the text font? i can't find any section which would offer me this functionality!
The only thing i can "customize" are the images...what about the rest? What if i want to have my buttons grey instead of Yellow?
Or am i completely wrong? does this customization has to be done in the R/3 itself?
Any help or hint is warmly welcome and of course will be rewarded by points.
Thanks a lot ....
best wishes
StefanHi Guys,
actually we made an OSS message.
The result was that there is no standard portal way to customize the IAC themes for the BP SRM witht the tool "ITS Theme Generator".
To my knowledge the only way how to adapt the theme of these iViews is to customize them directly at the SRM back end via the transaction SE80.
Well that's the end of the story...
Greetz to all of you
and see you soon in an other question /post
Kind regards
Stefan -
IAC iview ...
Hi!
I need to know about IAC iview..Some document about what is an IAC iview? How to create it?Hi
Internet Application Components(IAC) are complete business solutions for linking mySAP.com components to the Internet. With IACs users can access business information in mySAP.com components by starting SAP transactions, function modules or reports from a Web browser.SAP IAC is a productive way to programm to prgramm backen transactions in html.
For creating IAC iViews please go through the link:
http://help.sap.com/saphelp_nw2004s/helpdata/en/5a/6898dddb7afd44b07ca4e3bb15f676/frameset.htm.
Hope this helps you out.
Regards
Victoria -
Motorola SLVR L7 and iSync - or sync to an internet server...
Just bought it yesterday, surprised that it is not supported by iSync. I've got the latest OS X version, iSync version. Worked great with my RAZR, what is the timing for SLVR? How long do I have to keep the phone in the box before it is useful to me?
Alternatively, the phone does have sync capabilities to an internet server. If I have my contacts and calendar synced here at .mac, is there a way to access that server? Settings asked for in the phone are:
Name:
URL:
User Name:
Password:
Data paths -
Address Book:
Datebook:
I obviously know my user name and password; what are the other things to fill in for my .mac account?Did a software update, which included a 100MB update to OS X. Re-paired my SLVR with my laptop, and in doing so, it enabled iSync. So now it works. Go figure.
Still would like an answer about syncing over the internet, though, if possible. -
ESS Bus. Pkg EP 6.0 SP19 to R/3 4.7 ext.2 - IAC iView Problem
Given the above components, I've deployed the ESS business package to the Portal. All components deployed successfully... no errors. I'm creating a new Role (custom, not from BP) and I'd like to use one of the iViews from the Business package in this role. I'm using the "Enrollments" iView which seems to be an IAC iView calling PZ14.
Now the problem... when I access this iView via the Portal, ITS is called and the iView loads but only shows me the Easy Access Menu (SMEN). PZ14 never loads. I can enter PZ14 in the transaction field and it will load but it doesn't come up on its own. I also created a SAP GUI for HTML transaction iView to test PZ14 and that one works fine. To meet the customer's requirements though it must look "pretty" ... like the IAC iView does.
The only thing I changed on the iView was the system alias. Changed it from SAP_R3_HumanResources to SAP_R3 (this is the proper name of the system I'm using to test).
Any ideas?
-KevinThis has been resolved. Oddly enough, I inadvertantly added /webgui/! to the end of the ITS Path definition in the system object. This was causing the afore mentioned behavior. Once removed, the iView behaved as expected.
-Kevin
Maybe you are looking for
-
Media Encoder CC 2014 Exports larger file than Media Encoder CC with same settings
We like to deliver final exports to most of our clients with the following settings: Format: Quicktime Codec: H.264 Quality: 100 1920x1080, 23.976, progressive, square pixels use maximum render quality audio: uncompressed, 48khz, stereo, 16 bit, sing
-
WSDL error during generation of ABAP proxy for web service
Hi friends, I am getting error during the generation of ABAP proxy object for web service developed in .NET . Error : Proxy generation terminated: WSDL error (<extension> not supported). How to make this WSDL file compatible for ABAP proxy. I have
-
How do i put password on my network
how do i put password on my network? I put wep password on my network ( netgear router) and lock network control panel but never shows up when i sign in?
-
How to change sequence of variable entries in a WebTemplate?
WebApp Designer Gurus! I have a WebTemplate with 2 dataproviders (queries). One query has following order of variables set in query properties (using query designer): A B C Second query does not have A variable, and has following order of variables:
-
Changing a cloumn value in run time in ALV
Hi All, i have a requirement to change a value of a cloumn inside an ALV in runtime. is this possible,. if so how. thanks for help to be done. Thanks, selvakumar M.