Internet Sharing and AirTunes at the Same Time?

I've seen similar posts on this question, but none exactly on. I think I have a fairly basic situation.
I'm using my G5 as a base station to broadcast Airtunes to another room. G5 is connected to the Internet via cable modem. Using Airport Express as receiver.
Now, I just bought a powerbook and want to use the G5 for wireless internet access by the PB. But when I turn on internet sharing on the G5, it seems to cut off/shut down the airtunes network. Airport icon looks quite different. Conversely, when I get the airtunes working, the sharing can't be turned on.
Anyway to sort this out so that I can run both at the same time?
thanks
G5   Mac OS X (10.4.8)  

I believe, in theory, you should be able to do this. I am assuming from your description the G5 is connected, via Ethernet, to the cable modem and you want to use Internet Sharing to use it's wireless to commuicate with both the AX and the PowerBook. I think if you set up Internet Sharing and add the AX as a "wireless client" this may just work.
Let's double-check your settings...
To setup for Internet Sharing (Wired to Wireless):
Enable Software Firewall
System Preferences > Sharing > Firewall
- Click Stop to start the software firewall
Setup the Network
Cable Modem > (Ethernet cable) > [Ethernet port] Mac_#1 > (wireless) > Mac_#2
Setup Port Order
System Preferences > Network > Show > Network Port Configurations
- Verify that "AirPort" and "Built-In Ethernet" are enabled.
- Verify that "Built-In Ethernet" is at the top of the list, followed by "AirPort".
- Click "Apply Now."
Configure the Internet Connection
System Preferences > Network > Show > Built-In Ethernet > TCP/IP
- Configure IPv4: Using DHCP
- Configure IPv6: Automatically or Off
Enable Internet Sharing
System Preferences > Sharing > Internet
- Share your connection from: Built-in Ethernet
- To computers using: AirPort (checked) (Note: Uncheck all other entries in the list.)
- AirPort Options
-- Network Name: <anything you want>
-- Channel: Automatic
-- Enable encryption (using WEP) (optional)
-- Password: (optional)
-- Confirm Password: (optional)
-- WEP Key Length: (optional)
-- Click OK
- Click Start
To set up AirTunes on the AirPort Express Base Station (AX), using the AirPort Admin Utility, connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, try these settings:
AirPort tab
- Base Station Name: <whatever you wish or use the default>
- Wireless Mode: Join an Existing Wireless Network (Wireless Client)
- Wireless Network: <select the Internet Sharing wireless network>
Music tab
- Enable AirTunes on this base station (checked)
- Enable AirTunes over the Ethernet port (optional)
- iTunes Speaker Name: <whatever you wish>
- iTunes Speaker Password (optional)
In iTunes:
iTunes > Preferences... > Advanced > General
- Look for remote speakers connected with AirTunes (checked)

Similar Messages

  • Can't connect to internet via router and airtunes at the same time

    Can anyone help me connect to the internet via my BT Homehub, and play AirTunes through my Airport base station at the same time? I can only seem to do one at a time.
    I've seen the articles about setting up clients etc but don't get it. Using the Airport Assistant utilty doesn't really help either. Would like someone to go through the steps I need to follow.
    Thanks

    To set up AirTunes on the AirPort Express Base Station (AX), connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, use the AirPort Admin Utility to check these settings:
    AirPort tab
    - Base Station Name: <whatever you wish or use the default>
    - Wireless Mode: Join an Existing Wireless Network (Wireless Client)
    - Wireless Network: <select your BT Homehub wireless network>
    Music tab
    - Enable AirTunes on this base station (checked)
    - Enable AirTunes over the Ethernet port (optional)
    - iTunes Speaker Name: <whatever you wish>
    - iTunes Speaker Password (optional)
    In iTunes:
    iTunes > Preferences... > Advanced > General
    - Look for remote speakers connected with AirTunes (checked)

  • AirPort Express (2nd gen), share internet wireless and wired in the same time

    If I use my AirPort Express (2nd gen) and I connect the modem in WAN port, and a switch in the LAN port (this swich connect a computer and a NAS wired), can I share the internet wireless and via LAN and the same time?, the wireless devices and the wired devices would be in the same network?.
    Thanks.

    Thanks!

  • Do I need 2 airport expresses to run a network and airtunes at the same time?

    Meaning, if I set up the network in my office with the airport express, I need another one plugged into the stereo for air tunes right?  unless I want to unplug it and move it back and forth right?

    If the stereo and the Internet modem are not in the same room, then "yes," you will need another AirPort Express in order to do both simultaneously.

  • How to use internet sharing and airtunes?

    Question? how to use internet sharing and airtunes?
    OK I have following working separate situations.
    1. I can share my internet connection : is a router to ethernet cable into mac. Then over airport built in to my iMac ....... to other wireless computers, iphone etc...works fine.
    2. the I have a air port express that is only used for air tunes. I guess i had create a separate network for that. can select that in iTunes. Works.
    problem is can not use both at the same time!
    OK so Now I would like to combine the two; share the ethernet over airport on mac and send music to air port express....
    the main reason for this is cause I now have an iPhone and want to use the internet and the remote app to control iTunes from all over the house.
    I have not the first idea where to start.
    Any hints or tips will be greatly appreciated.

    The airport express is a router. And, only one router can be used to obtain an IP address. So in your airport express configuration set it so it does not obtain an IP address.

  • IP over Firewire and ethernet at the same time?

    Is it possible to use both IP over Firewire and ethernet at the same time?
    I want to use my TB hard drive attached to one Mac via Firewire 800 to backup another Mac also attached to the same drive via Firewire 800. I can only mount the drive on one machine at a time so I need to share it out to the other Mac. It works great if I set it up to do strait IP over Firewire, with static IPs, but that means I can't connect to the internet because my ethernet connection on both machines becomes the secondary connection method. Similarly, if ethernet is primary then I can't connect via Firewire. Is there a way to set it up so the Macs will know which method to use depending on the IP address?
    I am using 10.5.1 on both machines.
    G5, 1.8 GHz, 15.GB RAM
    MBP, 2.4 GHz, 4GB RAM
    Thanks!

    Certainly.
    In the network control panel I set Built-in FireWire to the top of the service order list, followed by Built-in Ethernet.
    Next, I set Built-in FireWire to Configure Manually with the address 192.168.1.xxx and the Subnet Mask to 255.255.255.xxx, making sure the Subnet Mask is set the same on both machines and that the IP address is different on both machines and different from the Built-in Ethernet addresses.
    I applied the settings, turned on Sharing on both machines, then mounted whatever shared drives I needed by connecting to the other machine using the FireWire IP address.
    Now I am able to share drives using FireWire 800 - which works great when used with Time Machine - and still use my normal ethernet to surf, etc..

  • Error Running Oracle Apps and Discoverer at the same time

    Hello,
    We are having trouble running Oracle Apps and Discoverer at the same time on certain user's machines. Here are the specifics:
    The user opens Oracle Apps in Internet Explorer. The user then opens Discoverer in another Internet Explorer windows and receives the following error: Runtime Error! Program: C:\Program Files\Internet Explorer\iexplore.exe abnormal program termination
    As a work around, I installed Firefox on those user's machines. These users run Oracle Apps in Internet Explorer and run Discoverer in FireFox. This has solved the problem in 99% of the cases. However, there is one user who is having FireFox using Discoverer freeze when running Oracle Apps in Internet Explorer.
    Can anyone provide any insight on how I can solve these conflict issues so users can run Oracle Apps and Discoverer at the same time?
    Thanks in advance for your help,
    Carlos

    Hi Michael,
    I agree with you completely. It is reccommended to run 10g on a separate physical server unless you have sufficient resources to run on the same server (which even most large clients do not) Even then, I would recommend a separate server.
    I should have put my comment in context :-)
    a.) I was only stating that it was possible
    and
    b.) whether 10g is installed on the same physical server or separate should not affect the client browser crashing issue that was posted.
    I do have an install with EBS11i and Discoverer 10g on the same physical server and it works fine (this is sandbox/ TEST). Most of my large customers have 10g installed on multiple physical servers due to load balancing (capacity).
    I do work for Oracle. I try to help out on the forum when I can, but it is hit or miss :-(
    I would be glad to discuss anything privately.
    As for the issue at hand, I can reproduce the problem and here is what is occuring.
    I have EBS 11i configured with Jiniator 1.3.24
    I have Discoverer 10g configured with Sun Java plugin 1.4.2_06
    1. If you launch EBS 11i apps and a form with MS IE, then the browser launches the form using Jiniator JRE 1.3.xx (whatever you have configured in AutoConfig for EBS11i)
    2. Next, the user navigates to EBS 11i SSWA and launches a Discoverer workbook.
    What occurs is a child IEXPLORE.exe process is spawned from the parent IEXPLORE.exe process and Discoveer Plus is launched. The parent iexplore.exe process will be attached to the Jiniator JVM. Now if Discoverer is configured with
    a.) Sun Java Plugin or
    b.)a version of Jinitiator that is a different version from what EBS 11i is configured with
    then you may get this conflict.
    It really is an MS IE/JRE conflict with Jinitiator and Sun Java Plugi and the way the broswers attaches to the JVM (IMHO) as this behaviour could be reproduced with other non-oracle java applets.
    You can workaround the situation by:
    a. configure EBS11i and Discoverer to use the same version of Jiniator 1.3.xx
    b. educate the users to open one MS IE browser to connect to EBS11i and then open a second MS IE browser to login to EBS11i SSWA or Discoverer 10g Plus directly to launch workbooks. They need to to this by clicking on the icon and not using File >> New browser. Clicking on the icon will spawn a new parent iexplore.exe process that can attach to a second/different JVM. File >> New Window will spawan a child of the parent.
    c. As you did use two browser versions. MS IE for EBS11 connection and FireFox for Disocverer 10g connection.
    I would choose optoin b, so that you can use Sun Java Plugin with Discoverer.
    Open to any comments. I hope that helps you workaround the problem. The ideal solution is to have EBS 11i use/cerified with the 1.4 or 1.5 JRE. In poking around, I see there is a related post to this on one of Oracle's EBS 11i Product Managers Blog.
    See:
    http://blogs.oracle.com/schan/2006/04/18#a23

  • Wi-fi connection on HP Deskjet 2540 and network at the same time?

    Hello
    Please can you tell me how to keep my connection to my wi-fi printer whilst connected to my Virgin Media Broadband? Every time I want to print I have to switch off the Virgin network connection and connect to the HP Deskjet Wi-fi, and then switch it back again to Virgin to browse or send emails.
    Thank you for your help
    AC33 

    Hey there @AC33 Welcome back
    I understand you are looking to install your printer on your network, so you can use the internet and printer at the same time. By the sounds of it, you may be connecting the printer currently, using the Wireless Direct feature, which will only allow you to connect to the printer or the network at a time. Basically, the printer is acting like a network.
    Here is a link for you to check out. It will help you install the printer on your network:
    Setting Up the Printer for a Wireless network for the HP Deskjet 2540 and HP Deskjet Ink Advantage 2...
    I hope this helps you, let me know the outcome
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • I cannot use data and voice at the same time.

    I cannot use data and voice at the same time.
    I am on Wifi (connected) and at the same time I am on a voice call. when I switch to my RSS feed reader it does not sync it comes out with a message cannot connect to internet, I thought it is a problem with the feed reader application, IE 10 behaves the same I cannot browse when I am on a voice call.
    This is a very basic issue, am I missing something? Please help.
    My Model is lumia 820 with the latest portico update.
    TIA
    Sandeep

    I am aware that packet data via EDGE and voice cannot happen at the same time, surprisingly when I am on voice call I cannot connect to internet via Wifi too

  • Tethering and Voice at the same time

    Is there a refence to show what models support using tethering and voice at the same time?

    I have the same problem with 2 iPhone 4S. When I'm only using data, download speed on 3G is 5.57Mbps, Upload 1.07Mbps and ping 79ms. As soon as I make or receive a phone call those speeds drop to:
    Download: 0.27Mbps
    Upload: 0.1Mbps
    Ping: 638ms
    With these speeds the web browser and all the other apps just keep trying to load or log in but nothing happens. As soon as I hang up, the speed goes back to normal. the problem is non existen while on wi-fi.
    AT&T triend to make some changes on the settings of my sim but itr didn't help at all. Just this morning I got a call from AT&T to let me know that the data speed is supposed top drop and that they don't make any promises as to the data speed, that their "talk & surf"propaganda only means that if you are using the internet, you can still receive phone calls....***? I never had this problem with the iPhones, 3G, 3Gs, 4. I asked them that I wanted to speak with somebody higher up or an enginner to discuss this issue but I'm still waiting to hear from them.
    The guys at apple were a little confused with this problem (I did reset the network settings but problem persisted, then reset all settings...nothing, then hard reset, restored from back up, deleted everything and set it up as new iphone...the problem is still there...) they asked if I could take the phone to the Apple store so they can run some advanced diagnostics...I'll have to take a road trip (closest Apple store is about 100 miles from my hometown)...Going on 1/5/2012....We'll see....

  • 3G and wifi at the same time

    Can I use 3G and wifi at the same time on my IOS 6 iPhone 4S? I have no Internet at home though the wifi, so I want to use the phones data plan, but I do have a wifi router and want it to use Apple TV etc. Is it possible?

    Hi and welcome,
    The iPhone will pick WifI over any Cell signal mist of the time. Even if the WiFi signal is weak. It is typically the faster. It can't use both. If you are being charged for you data use I would always opt for WiFi. If you are in an area that has both you and you need to use data services you can switch to airplane mode then turn WiFi back on. You won't receive phone calls during that time but you won't be using Cell Data either.
    Hope this helps,
    Message was edited by: lyriconii

  • My Ipad mini does not see my printer. my wife's ipad2 does. We both use IOS8 and upgraded at the same time. How can I remedy this?

    My Ipad mini does not see my printer. my wife's ipad2 does. We both use IOS8 and upgraded at the same time. How can I remedy this?

    OK great info!
    I found 2 possible ethernet to USB adapters:
    By "Plugable":  USB 2.0 to ethernet LAN wired network adapter - seems this will work, but I'll contact Plugable.
    2. Apple USB Ethernet Adapter
    Easily connect your MacBook Air computer to an Ethernet network with the Apple USB Ethernet Adapter. Small and light, it connects to the USB 2.0 port of your MacBook Air and provides an RJ-45 connector that supports 10/100BASE-T performance.  BUT NOT SURE IF THIS WILL WORK ON ANYTHING BUT a MacBook Air…
    One person commented: 
    This little gem used to be the device of choice for adding a second Ethernet interface to a Mac Mini Server and I'd been using one that way for about a year. After doing a software update to 10.6.6 it stopped working. Forewarned is forearmed – it appears that Apple is finally enforcing the MacBook Air system requirement.
    Thanks for any additional comments.
    Best regards,
    Steve Schulte
    Sunday 6 January 2013

  • How do i start video and audio at the same time in ios

    How do i start video and audio at the same time in ios?
    I have tried a lot of different ways but i cant figure it out?
    I can get the sound and animation (timeline) to start playing.
    There is no problem to start the video and the animation at the same time.
    But i cant get both the video and the audio to start playing when i press a button.
    It works great in OSX and on windows?
    Here is an example:
    // insert code for mouse click here
    // Play an audio track
    sym.$("_1")[0].play();
    // Play a video track
    sym.$("host")[0].play();
    // Play the timeline at a label or specific time. For example:
    // sym.play(500); or sym.play("myLabel");
    sym.play("marker1");

    If the game has sound in it (and possibly even if it doesn't) it may be overriding the Music app and causing it to stop playing - in which case there is nothing that you can do about it.

  • Recording Audio and Midi at the same time in Logic 7 Express Can it be done

    I am wondering if I can record audio and midi at the same time in Logic 7 Express. I am running my guitar thrugh a Roland GR 33, and a line out and using the GR 33 to trigger sounds in the Logic's synth section but cant seem to record all three tracks at once. If any one knows how let me know. Oh and I am running the GR Synth and Guitar into the Prosonus Fire Fox and have the GR 33 out midi to the Fire Box as well. So I guss the question is how do I sent up two audo tracks and one midi track to record in real time. Thanks Victor

    I am wondering if I can record audio and midi at the
    same time in Logic 7 Express. I am running my guitar
    thrugh a Roland GR 33, and a line out and using the
    GR 33 to trigger sounds in the Logic's synth section
    but cant seem to record all three tracks at once. If
    any one knows how let me know. Oh and I am running
    the GR Synth and Guitar into the Prosonus Fire Fox
    and have the GR 33 out midi to the Fire Box as well.
    So I guss the question is how do I sent up two audo
    tracks and one midi track to record in real time.
    Thanks Victor
    Try arming the audio tracks, select one of the tracks, then while holding down the shift key, select the midi track you want to record, arming the "r" on the midi track. Press "record".....
    HL

  • Can we use both INSERT and UPDATE at the same time in JDBC Receiver

    Hi All,
    I would like to know is it possible to use both INSERT and UPDATE at the same time in one interface because I have a requirement in which I have to perform both the task.
    user send the file which contains both new and old record and I need to save those in MS SQL database.
    If the record exist then use UPDATE otherwise use INSERT.
    I looked on sdn but didn't find any blog which perform both the things at the same time.
    Interface Requirement
    FILE -
    > PI -
    > JDBC(INSERT & UPDATE)
    I am thinking to use JDBC Lookup but not sure if it good to use for bulk record.
    Can somebody please suggest me something or send me the link of any blog or anything to solve this problem.
    Thanks,

    Hi ,
              If I have understood properly the scenario properly,you are not performing insert and update together. As you posted
    "If the record exist then use UPDATE otherwise use INSERT."
    Thus you are performing either an insert or an update which depends on outcome of a search if the records already exist in database or not. Obviously to search the tables you need " select * from ...  where ...." query. If your query returns some results you proceed with update since this means there are some old records already in database. If your query returns no rows  you proceed with "insert into tablename....." since there are no old records present in database.
      Now perhaps the best method to do the searching, taking a decision to insert or update, and finally insert or update operation is to be done by a stored procedure in MS SQL database.  A stored procedure is a subroutine available to applications accessing a relational database system. Here the application is PI server.   If you need further help on how to write and call stored procedure in MS SQL you can look into these links
    http://www.daniweb.com/web-development/databases/ms-sql/threads/146829
    http://www.sqlteam.com/article/stored-procedures-parameters-inserts-and-updates
    [ This part you can ignore, Since its not sure that you will face this situation
        Still you might face some problems while your scenario runs. Lets consider this scenario, after the stored procedure searches the database it found no rows. Thus you proceed with an insert operation. If your database table is being accessed by multiple applications (or users) other than yours then it is very well possible that after the search operation completed with a null result, an insert/update operation has been performed by some other application with the same primary key. Now when you are trying to insert another row with same primary key you get an error message like "duplicate entry not possible for same primary key value". Thus you need to be careful in this respect. MS SQL has a feature called "exclusive locks ". Look into these links for more details on the subject
    http://msdn.microsoft.com/en-us/library/aa213039(v=sql.80).aspx
    http://www.mssqlcity.com/Articles/Adm/SQL70Locks.htm
    http://www.faqs.org/docs/ppbook/r27479.htm
    http://msdn.microsoft.com/en-US/library/ms187373.aspx
    http://msdn.microsoft.com/en-US/library/ms173763.aspx
    http://msdn.microsoft.com/en-us/library/e7z8d5hf(v=vs.80).aspx
    http://mssqlserver.wordpress.com/2006/11/08/locks-in-sql/
    http://www.mollerus.net/tom/blog/2008/03/using_mssqls_nolock_for_faster_queries.html
        There must be other methods to avoid this problem. But the point is you need to be sure that all access to database for insert/update operations are isolated.
    regards
    Anupam

Maybe you are looking for

  • Should we keep our BR100 document up to date

    Hello, We had a BR100 document creating during the initial impletmanetation of our HR/Payroll ebsuiness suite system. Since this time we have had a few config changes - e.g. values added, flexfields created etc. Is it important to keep the BR100 docu

  • Cannot Read Attachments in Email

    I have had my iPhone since December. I use my iphone for my work e-mail which is a Microsoft exchange server that I use Synchronica. At first I was able to read attachments, but no longer. Has anyone had any issues not being able to read attachments.

  • Accept pin

    Hi haw ru Ihave zd10 but hae i accept pincod my freind add me i can se the pin but i cant accept????? And i can add any pin but no choice for accept pin why

  • Question regarding student version install policies

    HI, Can I install my student version of Creative suite on my work PC in addition to my home PC? I'd like to be able to use it in both places. If so what is the procedure? This was purchased a few (2ish)  years ago, so I dont recall what I did to regi

  • Can I delete the "Public" folder?

    I'm wondering if I can delete the Public folder, or if I should refrain from doing so? I've tried to figure out what the purpose of the Public folder is, but I'm not sure if I've understood correctly.. As far as I can see, it's there for other people