Internet sharing--sometimes the 2nd computer is connected, sometimes not.
Our set-up: the G4 is connected to DSL via ethernet. We've got the old G3 (for the kids) connected to the G4 by firewire.
Following the instructions in David Pogue's book Mac OS X The Missing Manual, we turned Internet Sharing "on" for the G4, the gateway computer, and set the network settings on the G3 to get internet connection via firewire.
We were triumphant! The G3 had internet connection. Yay!
Lo and behold, it didn't last. The next day, the G3 was not online. We double-checked the settings, and they were okay.
Internet Sharing was still "on", on the G4, and the G4 had internet connection.
The G3 indicated it had internet by a green light next to fireware in the Network panel, however Safari could not load anything and Mail couldn't get any mail.
Argh!
I ran Tech Tools on the G3, restarted it, checked the settings once again, and YAY!, the G3 had internet. Then...same thing...it didn't last. Safari won't load, Mail can't connect....
This has happened more than once. Sometimes the G3 is connected, and then it isn't.
Ideas, please. Why isn't the G3 staying online?
M.
If the host machine is allowed to sleep, the connection it shares will be lost.
Perhaps you need to attempt some other means of sharing internet; maybe
a router or other device to share the source between one or more computers.
Mine can use my AEBS (white orb version) to share the internet; they can
also use Ethernet, from the DSL modem.
So seldom do I think about this anymore, I am at a loss for details. Short
of looking online to see for sure what they call the hardware, exactly.
Good luck & happy computing!
Similar Messages
-
When I try to open the shared library on the 2nd computer (the one I want to xfer music to), the only songs that come up are those that are already in that same library (the library on the 2nd computer). While I can see computer #1 listed under 'shared,' when I click on it the only songs I can see are those that I already have on the 2nd computer. Hopefully that makes sense. Basically, the library from computer #1 isn't loading up.
What level of OS X is installed on your Mac (your profile is incomplete)?
Barry -
I am trying to set up internet sharing from my macbook air but there does not seem to be an option for this because the air is connected to the internet via wifi connection. Is it possible to still share this?
It depends upon how the other machines are connecting to your MBA:
If the the other machines are also using wi-fi, they can connect directly to the wireless access point (router) without going through your MBA
If the other machines are connecting to the MBA using ethernet you can share your wi-fi connection to them -
Internet sharing between cellphone and computer us...
I have watched some videos in youtube about internet sharing between cellphones and computer using "BLUETOOTH"... How do they do that? How can we do this? Anybody here can share to us how to do this??
24-Aug-2008 12:28 PM
monkeyboy85 wrote:
I personally would not of thaught this is possible as bluetooth is essentially just a radio signal, obviously it can transmit data but i dont think it has the ability to stream a broadband connection. Could be completely wrong but thats what i think.
You are wrong
Most Nokia phones with a bluetooth interface can let you connect your computer to the Internet using your phone as a modem connected by bluetooth. So, BT definitely can support the data stream.
Enabling a computer to use the phone's Internet connection over BT or via USB cable is possible with no additional software on the phone. Doing the opposite, allowing the phone to use the computer's Internet connection via BT, requires additional software. GNUBox does just that.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you! -
If I have my iMac internet sharing turned on, the Airport Utility won't recognize the Airport Express I want to use to stream iTunes to my stereo. When I turn the iMac internet sharing off, the Airport Express appears but calls itself a base station. I just bought the Airport Express and it's not clear how I should set up my System Preferences for Sharing. Thx
Yes. Unfortunately the stereo is too far from the wired ethernet connection My iMac is connected to the internet using an ethernet cable from the DSL modem (plugged into the wall, not wireless). The Airport Express is plugged into an outlet 25' away from the iMac and connected to my speakers. I've turned on the iMac Airport wireless Internet Sharing, hoping to stream iTunes to the Express connected to the stereo. The iMac Airport picks up several neighborhood networks so I know it's working (and I connected my iPhone wifi to it just to check as well).
When I use Airport Utility to set up the Express, the only time Utility recognizes the Express is when the iMac Airport is off. When I turn on the iMac Airport, the Airport Utility immediately loses the Express and asks to rescan.
Maybe that explains my problem better. -
I'm trying to install Adobe CC on the 2nd computer, a Macbook and after downloading the CC desktop app I double click to intall. When it looks to be done installing I go to double-click on the ourobouros icon at the top and I am rewarded with the spinning beach all of death. Any suggestions?
Hi,
Please refer to the help document below to fix the issue:
App doesn't open | Progress wheel spins continually
Regards,
Sheena -
I am trying to load my library on the new computer but it will not let me import. when i shut off the old computer the shared library disappears.
Yeah... that's exactly the way it is supposed to work. Sharing the library does not move it anywhere.
To move the library to the new computer, copy the entire iTunes folder from the old computer to the new computer. -
I can't connect to Internet. On the list of network connections it has Wireless and thats it. My network isn't on there. I reset connections and there wasn't no change. Please help.
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1. -
I have 2 iMac's. I installed snow leopard on one. Can the snow leopard I purchased be installed on the 2nd computer?
If you bought the family pack.
The single version is licensed to use on one machine.
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents -
My computer crashed with all my itunes files. I was able to get some off and transfer them to another computer. I am afraid to sync my ipod to the new computer becaused I do not want to loose all of my playlists and other music. Will this happen?
To import music into your iTunes library on the computer go to iTunes>Help>iTunes Help>Add items to iTunes and follow the instructions
Delete the "songs" that do not play in your iTunes library and reimport them. -
I just bought a new Retina Display macbook pro, and I plugged in my iPod touch (4th gen) into the new computer, but it will not show up, even after I typed in the passcode. How do I get my iTouch to sync with my new computer without restoring my itouch?
iOS: Device not recognized in iTunes for Mac OS X
-
How can I get the 2nd copy of my fiscal note? I live in Brazil and my iphone was bought in USA
How can I get the 2nd copy of my fiscal note? I live in Brazil and my iphone was bought in USA
What is a fiscal note? Contact the place where you bought your iPhone in the US.
Warranty is valid only in US. -
I switched from Internet Explorer to Mozilla Firefox and my bookmarks don't appear to have been transferred. The FAQ's say it should be in a folder marked Internet Explorer in the "Bookmarks Menu", but it's not there.
Did you see a "Bookmark" tab in your Menu Bar? All of your IE Favorites should be there if you pull it down.
FYI, It's called Bookmarks in Firefox. -
My computer crashed and I have to buy a new one. What happens to my Contacts, Photos, etc when i use the new computer? I do not have an iTunes backup.
Do you have the iCloud set up? If you don't you need to buy a third party software that will do it for you when you plug your phone into the new computer. You can google: iPad/iPhone/iPod to Computer Transfer. You have to pay for the software but it's really a life saver and you get free updates for life. It'll save you a lot of pain and suffering in the future. I've used it many times.
-
I thought I would restore my iphone so I backed it up and everything it backed up fine.
It will put the firmware on the phone fine it also syncs but it come up and says warring it didn’t sync the number of apps. Then I press ok then I get this.
iTunes could not sync information to the iphone because a connection could not be established to the iphone
When I re plug in the I phone in it shows it the data synced but it’s all other
It’s just a 8 gig I phone
I up dated to windows 7 so I thought that was it so I tried it with windows xp the same thing happened
And the newest I tunes would a older I tunes workI thought some screen shots may help
The first one is at it syncs you can see at the bottom the apps are green and the other is yellow like it should be.
this one is after it syncs and the frist Warning notice the other now
warn #2
warn #3
and the i phone
Maybe you are looking for
-
For reasons explained below, I want to try to re-import all my images into LR and hope that none/few are in fact considered new and are imported. Yet, for some folders, LR is apparently unable to detect that my source images are already in the catal
-
Only want one document open at a time
Can I stop all items created with that program from opening when I open just one document? Sometimes when I open Preview all items that have recently been opened with that application will open. Is there a way to prevent that from happening? Thanks.
-
New to LiveCycle - Submit Email problem
When I try to distribute a form LiveCycle wants to attach the form to my email. I'm using Yahoo mail. The LiveCycle attachment specifies the folder for the attachment but I've tracked it down to a hidden system folder. Is there a way to specify the f
-
Java not starting... Failing in starting apps phase
Hi experts, We are facing a probling while starting a PI 7.1 instance. the Java stack is not getting up. It is coming up to the phase 'starting apps' and failing from there. We had recently updated the support pack of the instance from 6 to 7. But th
-
Screen Layout for Purchase Orders
Hello, Using the screen layout settings in config, I want to set a particular field to display only in change mode in ME22N. But enjoy PO's are all controlled by entry ME21N only in config, So this means if I set AKTV (change) to display in ME21N tra