Internet sharing via smartphone with USB

Hi,
I would like to use my smartphone HTC S730 which has a flat fee 3G internet connection to act as modem for my MacBookPro. This way I don't need a seperate datacard for my laptop and, when using USB my smartphone's battery is charged too.
BUT, Leopard > system preferences > internet sharing doesn't show USB (or Bluetooth) as option(s) for sharing. I have to choose Airport, Ethernet or Firewire. My smartphone cannot connect via one of these three options. iCentre store in Amsterdam couldn't answer my question. Any suggestions?
thanx,
Sam van Buuren.

You're not going about it correctly. You want to use your smart phone as a modem. You need set up System Preferences>Network not to use internet sharing. Contact the manufacturer and/or your service provider. You may need a modem script.

Similar Messages

Internet sharing via smartphone and USB

Hi,
I would like to use my smartphone HTC S730 which has a flat fee 3G internet connection to act as modem for my MacBookPro. This way I don't need a seperate datacard for my laptop and, when using USB my smartphone's battery is charged too.
BUT, Leopard > system preferences > internet sharing doesn't show USB (or Bluetooth) as option(s) for sharing. I have to choose Airport, Ethernet or Firewire. My smartphone cannot connect via one of these three options. iCentre store in Amsterdam couldn't answer my question. Any suggestions?
thanx,
Sam van Buuren.

You're not going about it correctly. You want to use your smart phone as a modem. You need set up System Preferences>Network not to use internet sharing. Contact the manufacturer and/or your service provider. You may need a modem script.

Internet Sharing via USB Wifi Dongle?

I just acquired a first gen Mini (1.25Ghz, 1GB RAM) with no Airport built in. I was able to add wireless to it via a Ralink 802.11n USB dongle. Here's my question:
Can I connect the Mini to the internet via ethernet and then use the USB dongle to share the connection with other Macs in my house?
I currently have an old PowerMac G4 acting as a server/wireless router. (Ethernet in to give it a real IP address for easy access from anywhere. Airport out to give internet access to my MacBook Pro.) It's a great setup, and serves me well (no pun intended), but if I could get the Mini to take its place, it would save me room.
Anyone know how to get one of these USB Wifi dongles to share out internets?
Thanks in advance for any thoughts.
SJ (no, not that SJ)

Can I connect the Mini to the internet via ethernet and then use the USB dongle to share the connection with other Macs in my house?
I don't have a USB wireless adapter, but I believe in order for this to work, you would have to be able to select it when attempting to configure Internet Sharing.
Does this USB adapter show up in the list of network devices under the Network panel in System Preferences? If it does, go to the Sharing panel. From this panel, select Internet Sharing; choose the USB adapter for the "Share your connection from" list, and then, choose "To computers using" = "Ethernet."

Internet sharing via dongle, how to set password for wifi network created?

I am using a USB dongle with my Mac book Pro to share internet through AirPort, so that i can access my mac book's wifi from my iphone. This works great, but it is an open network and I woud like to set up a password.
If anyone can point me in the direction I would be very grateful!
Thanks

If you are using OS X's Internet Sharing feature, then you can configure wireless security on your Mac's internal AirPort Card but are limited by the OS X version that you are using. It was not until Mountain Lion that Apple provided WPA2 security. Prior to this only WEP was available.
You configure Internet Sharing via System Preferences > Sharing > Internet Sharing. (I don't have 10.6.x on any of my Macs so this may be different for your case.) Once you configure what is shared, you can then add wireless encryption.

Screen-Sharing and Internet-Sharing via same network connection

Hello out there,
I'm using a TiBook (G4 867MHz) and a MacBook Pro 17". They are connected via a WLAN-router. Additionally the MBP is connected to the internet via an UMTS-connection established with a Merlin 870XU type PC-card.
Network is working fine, including screen-sharing. Also the internet connection on MBP works without error. But if I activate Internet-Sharing via WLAN to get my TiBook connected to the internet, the MBP connection to the WLAN is cut off.
Can somebody tell me what's going wrong and how to solve it?
Greetings from good old Germany
Ansgar

Hello out there,
I'm using a TiBook (G4 867MHz) and a MacBook Pro 17". They are connected via a WLAN-router. Additionally the MBP is connected to the internet via an UMTS-connection established with a Merlin 870XU type PC-card.
Network is working fine, including screen-sharing. Also the internet connection on MBP works without error. But if I activate Internet-Sharing via WLAN to get my TiBook connected to the internet, the MBP connection to the WLAN is cut off.
Can somebody tell me what's going wrong and how to solve it?
Greetings from good old Germany
Ansgar

Internet sharing via airport doesn´t work

Hello to everybody,
my problem is, when I do internet sharing via Airport on my imac (OSX 10.6.8) so I can use my ipad for surfing. The connection establishes for a short time and then it breaks down. Once in a while I can reconnect, but it´s constantly breaking.
I know, this problem is posted a million times, but it still seems not to be solved (or I didn´t find the right thread with the solution).
Bthw. I phoned the apple support. They wanted to charge € 49,--. Now I´m quite mad at apple. This *****. They are having a problem with their software and they want to charge me? That´s incredible. I can´t understand what´s the hype about apple. Such an awfull bad support they´re giving (or not giving at all).

OK. To your information. Today I tried the following: I switched off and on internet sharing twice after boot and voila, wifi seems to work fine. Yeah, that´s what I call a sophisticated computer system. Really crappy stuff!

Why my MacBook pro with Maverick, when I'm connected with internet key and connect with usb cable my HTC One the Mac restat with error?

Why my MacBook pro with Maverick, when I'm connected with internet key and connect with usb cable my HTC One the Mac restat with error?

Solution may be found if you search in the "More Like This" section over in the right column.

HT2020 if you have internet sharing on imac with Mountain Lion its stil problem with sleep mode ! why ???

if you have internet sharing on imac with Mountain Lion its stil problem with sleep mode ! why ???

Log a bug with Apple, with whatever details you can provide. In the interrim, consider acquiring a router; either a repurposed x86 box running open-source networking or gateway software, or a commercial device.

Internet Sharing via USB 3G

Hi,
Since upgrading to Lion, I was unable to share my USB 3G internet connection via ethernet.
Sharing the USB 3G internet via Wi-Fi works fine though.
Any ideas?

Your carrier needs to support it and you need to subscribe to a tethering plan. Check this list for supported carriers and details on who supports the personal hotspot feature: http://support.apple.com/kb/ht1937

Windows 7 wont connect to Lion Internet Sharing via Wifi

I have a 2011 Macbook Pro 15" with i7. I know the internet sharing feature works, because I used the wifi internet sharing with a Macbook Air and that worked fine. But when I try to connect from a Windows 7 Ultimate laptop, the connection cannot be established. I tried:
Changing the Wireless Name
Changing the encryption key
Tried no encryption key
Rebooted
Am I missing someting? Am I correct to assume that the built in internet sharing allows you to connect your devices to macbook pro as a router? I appreciate your assistance, thanks!

Same here.
I have all my machines (rather HAD) connected to the internet via a shared single connection through a 3G dongle (welcome to the countryside). I made the mistake of upgrading my machine to Lion only to realise a couple of days later that all the other machines had been starved of internet access.
Now only my main machine has access, even though according to all of my thousands worth of apple gear the green lights are on and all is ok. The Airport extreme says it's connected, its lying. The Timecapsule says its connected, its lying. The Mac mini says its connected, its actually admits there is a problem when you run the network diagnostics. Same for our macbook pro. At least the Windows machine says it's connected but no internet.
This is pathetic as apple have know there was an issue since june last year. Once more I get the feeliing Apple couldn't give a fiddlers'. Most likely greedily eyeing the forthcoming cash bonanza from the ipad 3.

IPhone - OSX 10.5.6 internet sharing via wifi has packet loss

I try to access the web on the iPhone (for testing purposes) via the bult-in internet sharing capability of my MacBookPro via WiFi. I get very slow connections and high packet loss on distances of less than a foot.
If I activate Internet sharing (eth0 - AirPort) I have packet loss of up to 80% on a Ping to the iPhone. This results in an unusable connection. In this case the iPhone gets a DHCP address from the DSL box (10.0.2.2). Pay attention to the HUGE standard deviation of the packets in case of the internet sharing!!
If anyone has config hints, I appreciate that very much. Does anyone know how to bridge en0 to Airport with WEP enabled?
Internet sharing activated:
--- 10.0.2.2 ping statistics ---
202 packets transmitted, 150 packets received, 25% packet loss
round-trip min/avg/max/stddev = 18.312/1768.538/8198.289/2201.202 ms
If I set up a Computer-Computer network with a WEP password I get no packet loss, but of course I cannot access the internet that way because there is no way in preferences to bridge the networks.
--- 169.254.246.154 ping statistics ---
443 packets transmitted, 442 packets received, 0% packet loss
round-trip min/avg/max/stddev = 1.441/1.983/57.068/2.691 ms
Internet Sharing (ifconfig):
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0 mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::21b:63ff:fe92:d74%en0 prefixlen 64 scopeid 0x4
inet 192.168.0.17 netmask 0xffffff00 broadcast 192.168.0.255
ether 00:1b:63:92:0d:74
media: autoselect (100baseTX <full-duplex,flow-control>) status: active
supported media: autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 10baseT/UTP <full-duplex,flow-control> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback> 100baseTX <full-duplex,flow-control> 1000baseT <full-duplex> 1000baseT <full-duplex,hw-loopback> 1000baseT <full-duplex,flow-control> none
fw0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 4078
lladdr 00:1b:63:ff:fe:77:99:ac
media: autoselect <full-duplex> status: inactive
supported media: autoselect <full-duplex>
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::21b:63ff:fec1:e75b%en1 prefixlen 64 scopeid 0x6
inet 169.254.149.180 netmask 0xffff0000 broadcast 169.254.255.255
inet 10.0.2.1 netmask 0xffffff00 broadcast 10.0.2.255
ether 00:1b:63:c1:e7:5b
media: autoselect status: active
supported media: autoselect
en2: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::21c:42ff:fe00:0%en2 prefixlen 64 scopeid 0x7
inet 10.37.129.2 netmask 0xffffff00 broadcast 10.37.129.255
ether 00:1c:42:00:00:00
media: autoselect status: active
supported media: autoselect
en3: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::21c:42ff:fe00:1%en3 prefixlen 64 scopeid 0x8
inet 169.254.149.180 netmask 0xffff0000 broadcast 169.254.255.255
ether 00:1c:42:00:00:01
media: autoselect status: active
supported media: autoselect
C-C Network:
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0 mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::21b:63ff:fe92:d74%en0 prefixlen 64 scopeid 0x4
inet 192.168.0.17 netmask 0xffffff00 broadcast 192.168.0.255
ether 00:1b:63:92:0d:74
media: autoselect (100baseTX <full-duplex,flow-control>) status: active
supported media: autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 10baseT/UTP <full-duplex,flow-control> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback> 100baseTX <full-duplex,flow-control> 1000baseT <full-duplex> 1000baseT <full-duplex,hw-loopback> 1000baseT <full-duplex,flow-control> none
fw0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 4078
lladdr 00:1b:63:ff:fe:77:99:ac
media: autoselect <full-duplex> status: inactive
supported media: autoselect <full-duplex>
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::21b:63ff:fec1:e75b%en1 prefixlen 64 scopeid 0x6
inet 169.254.149.180 netmask 0xffff0000 broadcast 169.254.255.255
inet 10.0.2.1 netmask 0xffffff00 broadcast 10.0.2.255
ether 00:1b:63:c1:e7:5b
media: autoselect status: active
supported media: autoselect
en2: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::21c:42ff:fe00:0%en2 prefixlen 64 scopeid 0x7
inet 10.37.129.2 netmask 0xffffff00 broadcast 10.37.129.255
ether 00:1c:42:00:00:00
media: autoselect status: active
supported media: autoselect
en3: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::21c:42ff:fe00:1%en3 prefixlen 64 scopeid 0x8
inet 169.254.149.180 netmask 0xffff0000 broadcast 169.254.255.255
ether 00:1c:42:00:00:01
media: autoselect status: active
supported media: autoselect

I accidentally found a workaround:
1. Activate internet sharing
2. Goto network preferences and use AirPort: "Create network ..."
3. Check require Password and create a C2C network
4. The Airport Icon changes from the up-arrow to the computer icon
5. Connect with the iPhone.
Packet loss is gone and sharing works fine.
BIG BUG: Procedure has to be repeated every time AirPort is turned on/off, as Internet Sharing disables/resets the airport setup!

Internet Sharing via Firewire

I am trying to use my Intel iMac (10.5.7) as a gateway computer and connect my eMac (10.4.11) to it via Firewire to access the internet. (My router is faulty) I am able to share files successfully between both computers using the Firewire cable, but I cannot get the eMac to access the internet from the iMac. I have the iMac set up for sharing but the eMac cannot access the internet this way. I have followed the steps described in the Missing Manual but the Network page on the eMac doesn't allow me to click "Apply Now" because the button is grayed out. I suspect some of the boxes need some information entered, but I don't know what.
Any suggestions gratefully received.
Robin.

Noah,
Well, yes, replacing the router is the obvious solution. I had stopped using the suspect router to see if it was the cause of my connection dropouts. While I was conducting this experiment I thought I would try out the Firewire connection for Internet sharing, just for fun. Since I have had a trouble free connection since I removed the router I think I have isolated the cause of the problem.
What has puzzled me is why did internet sharing work with the eMac as the gateway computer, but not the other way around with the iMac as the gateway computer. Anyway, it is rather academic as I will probably replace the router, if Netgear cannot suggest a trouble free configuration.
Thanks for your reply.
Robin.

Turning on Internet Sharing via Airport disrupts internet connection!

I have a very strange problem.
My iMac G5 (10.4.10) is connected to broadband via an Ethernet cable. Everything works perfectly, Google Earth works, emails come through, internet downloads are perfect...
BUT!!
When I turn on my Internet Sharing to share my Ethernet connection via my Airport connection (to let my husband surf the net on his PC) all **** breaks loose on my Mac.
Google Earth does not function properly, all internet downloads (.dmg) come up with "codec overrun errors", all images sent via email downloaded through Entourage are corrupted, the list is endless. I have to turn off my Internet Sharing, turn off Airport, and then everything returns to normal again.
Why is this, and can someone help stop the fights my Husband and I are having when it comes to sharing the Broadband connection through my Mac - I don't want to because my Mac goes crazy!
Ta muchly!!!

Sorry but an Ethernet hub will NOT properly share the ISP connection. The ISP only gives you a single IP address. If you use a hub (or Ethernet switch), the first computer you turn on will win and get the only IP address. The other computer will not be able to connect.
To properly share the connection, you need to get a router. The router uses the single public IP address provided by your ISP and creates multiple local IP addresses for your computers.

Making internet sharing work (Issue with Network Address Translation)

Trying to use internet sharing to enable a BluRay player to get access to the internet for firmware updates, BDLive, etc.
MacBook Pro is setup with Airport (en1) enabled and connected to the internet.
Ethernet port (en2) is set to "Configure IPv4: Off."
I have configured the /etc/bootpd.plist file with the following configuration as mentioned in http://www.macosxhints.com/article.php?story=20071223001432304&query=xbox%2B360.
<key>replythresholdseconds</key>
<integer>0</integer>
After starting up Internet Sharing, the following is observed:
Ethernet port(en2) is reporting 192.168.2.1 as its IP address in Network Utility but not in the Network System Preferences Pane.
The Mac is responding to the DHCP request from the BluRay player and the BluRay is assigned an IP address of 192.168.2.2/24 with a default gateway and DNS of 192.168.2.1.
So you think there would be success with this but wrong. The system log is reporting that NATD "failed to write packet back (No route to host)" or "failed to write packet back (Host is down) and the connection test on the BluRay player is consistently failing.
Even manually configuring the ethernet port on the Mac is resulting in failure. Is there something else I'm overlooking?
Hoping someone can spread some light on this. Thanks.

Ashy Larry wrote:
So you were able to get it to work then?
I ask because I want to get the Sony BDP-N460 Bluray player for my parents, as it's the only Sony player aside from the Playstation 3 that is Netflix capable. I'm not sure why their other wi-fi enabled player doesn't have Netflix on it. I suppose I could get them a Playstation 3, but they don't really need one.
More than likely that Sony is positioning its products that way so people do go for the PS3 and increase it install base and possibly get you to by a game or two.
I want to connect the player to an old iBook G3 that's running 10.4 and share its connection. I did this successfully with the iBook and my Xbox 360 and wanted to know if it was possible to do so with a Bluray player.
I would bet that you will be able to accomplish this if you were able to get a 360 running through it. Just ignore the Blu-Ray player's test connection tool and try to connect to Netflix. Just play it safe and buy it through a retailer like Amazon where returns are hassle free.

Lumia 920 Internet Sharing not working with Window...

I am unable to get Internet Sharing to work from a nokia Lumia 920 to Dell XPS running Windows 8 with Intel Centrino Wireless-N 1030. Help !!
Things I have tried:
+ Checked the phone was actually working with Internet sharing: Different laptop running Winows XP connected fine, everything worked
+ Checked the Dell XPS could connect to inernet sharing using an HTC One as the hot spot: everything worked fine.
+ Tried turning on FIPS: made no difference:
+ Tried updating/different drivers: made no difference
+ Tried turning of N, and only using g: made no difference
+ Tried different access point settigns on the phone: made no difference
This is one of those things I expect to just work, like it does when the phoen is used with a different laptop, or when a different phone is used with this laptop.
I've run out of ideas. Any help appreciated.

Finally fixed it. First I tried using the latest Intel drivers, but to no avail. So I did a driver rollback, and that seems to be working. Driver version now at 14.2.1.3, Microsoft release.
So problem is a compaitibility issue with the drivers on the windows laptop. All I can advise others having similar problems is keep trying different drivers (newest not necessarily the best)

Internet sharing via smartphone with USB

Similar Messages

Maybe you are looking for