Internet sites that are using NW-EP

Hi,
if you type www.sdn.sap.com in the Internet Browser, it gets redirected to http://www.sdn.sap.com/irj/sdn , due to the presence of /irj/ in the url, i understand that www.sdn.sap.com is implemented using NW-EP. (let me know if this understnanding is not correct.)
I have seen NW-EP being used for intranet sites for the employees, consumers etc.
my question is: Is EP also used for hosting intranet conent.
are there any sites (other than www.sdn.sap.com) which are available on internet and that are implemented using NW-EP.
thanks,
Madhu.

Hi Madhu,
Check this forum discussio. Hope it helps you.
Good internet company portals running on netweaver portal?
Regards
Veera

Similar Messages

HT4061 I have 2 Internet sites that I use with my job. When I try to log in using my iPad it tells me that I have to use Internet explorer. Is there a way to do this?

I have 2 Internet programs that I am trying to access from my iPad and they say I have to access through Internet explorer?? What do I do?

Internet Explorer does not exist for the iPad. Obviously Safari will not work. There are other browsers available that can identify as Internet Explorer and one of those might work for you. However, there is really no way to know unless you try one of those browsers.
iCab Mobile and Atomic will identify as IE, so you could try one of those.

Internet sites which are built on iStore and iSupport

We are planning to implement iStore and iSupport for our client.
Looking for already implemented internet sites which are built on both istore and iSupport modules.
We have seen many sites which are implemented on istore but none with iSupport.
Any references for the same is highly appreciated.

If you don't have a backup copy of the domain.sites2 file that resides in your Users/Home/Library/Application Support/iWeb folder, you will have to recreate them from scratch. Chapter 2.3 on the iWeb FAQ.org site has tips on using some of the existing files, image, audio, video, etc., from the published site in the recreation of the site.
OT

I want to change my default sites that are restored when i clear history and top sites

How do i change the top sites that are resored after clear of history and top sites?

Alternatives for Help Resetting Security Questions and/or Rescue Mail
     1. If you have a rescue email address or a Security Questions issue, then see:
         If you forgot the answers to your Apple ID security questions - Apple Support.
         Manage your Apple ID primary, rescue, alternate, and notification email addresses - Apple Support
     2. Fill out and submit this form. Select the topic, Account Security. You must
         have a Rescue Email to use this option.
     3. This is the only option if you do not already have a valid Rescue Email.
         These are telephone numbers for contacting Apple Support in your country.
         Apple ID- Contacting Apple for help with Apple ID account security. Select
         the appropriate country and call. Ask to speak to the Account Security Team.
     4. Account security issues almost always require you to speak directly to an
         Apple representative to securely establish your identity as the account holder.
         You can set it up so that Apple calls you, either immediately or at a time
         convenient to you.
            1. Go to www.apple.com/support.
            2. Choose Contact Support and click Contact Us.
            3. Choose Other Apple ID Topics and choose the appropriate topic for
                your issue.
            4. Follow the onscreen instructions.
         Note: If you have already forgotten your security questions, then you cannot
         set up a rescue email address in order to reset them. You must set up
         the rescue email address beforehand.
Your Apple ID: Manage My Apple ID.
                        Apple ID- All about Apple ID security questions.

How to update SP2010 sites that are missing the Visual Upgrade options

So, we are moving towards upgrading some SP 2010 sites that are currently using the old SP 2007 look and feel so that they have the new ribbon Visual Upgrade.
For some reason, some of these sites do not have the Site Actions > Visual Upgrade option nor do they have the Site Actions > Site Settings > Visual Upgrade link.
Does anyone know what can be done to make those available?
Thank you.

Even when I take a look at
http://myfarm/sites/Support/dept1/_layouts/prjsetng.aspx?Source=http%3A%2F%2Fmyfarm%2Fsites%2FSupport%2Fdept1%2FPages%2Fdefault%2Easpx
which is where the site actions > visual upgrade link should take the user, that page does not have the visual upgrade options on it.

My macbook pro keeps saying I have 450 gigabytes out of 500 that are used. But when I look on finder there are no files that are anywhere close to that amount. I went through and deleted files from my mac and now I only have 10 gs free

My macbook pro keeps saying I have 450 gigabytes out of 500 that are used. But when I look on finder there are no files that are anywhere close to that amount. I went through and deleted files from my mac and now I only have 10 gigabytes of additional space free. My mac now says I have 440 gigs of other that is used. But does not make sense, do I have a virus?

Since you have not identified the OS your MBP is using, these extract may or may not assist you.
http://pondini.org/OSX/LionStorage.html
http://pondini.org/OSX/DiskSpace.html
You may also download from the Internet OmniDiskSweeper (free) and open it it will show all of the files on your MBP and the respective sizes.
ciao.

How to find out FICO user exits that are used by User

How to find out the FICO user exits that are used by user.

Go to tcode CMOD. In the project field drop down your list there. Put a Z* there and run the list. These should be all the exits that are activated. Search for the ones that pertain to FI. You can also search by development class. You need a little ABAP knowledge to search easily. You get this by going to the tcode then to status then to the program then to the attributes. There you find the development class. Ie FBAS.
pls assign points if helpful as a way to say thanks.

HT204380 Can you FaceTime between 2 iPads that are using the same apple ID but separate emails?

Can you FaceTime between 2 iPads that are using the same apple ID but separate emails?

Yes......I do so all the time.

How do we view a list of the temporary and free sites we are using?

Adobe Web Host - Free Sites /
How do we view a list of the temporary and free sites we are using?
When logged into Creative Cloud we used to be able to see the temporary and hoe many of the 5 free sites we were using.
Can’t find a list on my Creative Cloud account or when linking to "Manage" from within Muse /
No mention of the free sites in the FAQs. Has there been a policy change ? Are free sites still included in the Subscription ?
// from - Adobe Muse Help | Adobe Muse / Common Questions //
When I publish in Adobe Muse CC, do I have to pay for hosting with Adobe?
Adobe Muse CC allows you to publish your temporary website on the Adobe hosting platform at no charge for a 30-day trial period. This gives you the opportunity to send a live URL to your client for review. All sites in trial mode with Adobe will include the domain “businesscatalyst.com” in it. If you decide to take the site live by paying for the monthly hosting, you can transfer your own domain and remove the businesscatalyst.com subdomain. Or you can export the HTML and host the final site with a hosting provider of your choice.

Yeah, not sure why they took it out of the cloud interface.
But if you go to http://www.businesscatalyst.com/partnerportal and login with your cloud ID you will have access to all your cloud sites and many other features.

How to identify reports that are using a specific universe object?

Any idea how to use BO Auditor or Metadata Manager to identify webi reports that are using a specific universe object or universe prompt in the report SQL?

Hi Samuel,
In case you are using BOXIR2 you can do this by editing the crystalenterprise.webi.xml file.
Replace the CrystalEnterprise.Webi.xml file (Take a backup) with the edited one.
Path where you can find this file- Tomcat/webapps/businessobjects/enterprise115/desktoplaunch/WEB-INF/classes/META-INF/CrystalEnterprise.Webapps/ePortfolio/plugins
Paste the Custom Documentation folder in Tomcat\webapps\businessobjects\enterprise115\desktoplaunch\
May I know your email Id so that I can send you the edited crystalenterprise.webi.xml file.
Regards,
Sarbhjeet Kaur

How do I get files from multiple DVDs that are using thesame file names?

How do I get files from multiple DVDs that are using thesame file names? Message says "file already exists in catalog"
Message was edited by: marcr56

marcr56
I am viewing your question from different perspective, that is, the issue that you face when you are ripping VOBs from a second DVD-VIDEO on DVD disc using Premiere Elements,
It is best to give the Premiere Elements version and computer operating system that it is running on. In the absence of that, I will generalize.
Assuming that you are using
Premiere Elements 12
Add Media
"DVD Camera or Computer Drive"
Video Importer
Typically the Video Importer Save In: is C:\Users\Owner\Videos
Each of your DVD discs is going to have the same names for the ripped VOBs (VTS_01_1.VOB and so on depending on the duration of the movie). Consequently, after the ripping of the first DVD's VOBs and their save to Videos, you will end up with that "files already existing..." block for the ripping of the VOBs from the second DVD.
The answer is, for each DVD disc VOB ripping, to plan ahead and create and set for different folders in Videos in the Save In field of the Video Importer.
Please review and then let us know if that works for you. Please do not hesitate to ask if you need clarification on anything that I have written.
Thank you.
ATR.

Tried to download adobe flash several times on our new Mac and it will not open in any internet sites that we have tried.

Tried to download adobe flash several times on our new Mac and it will not open in any internet sites that we have tried.

test to see if it's installed, Flash Player Help

Editing a movie that was already cut together without transcoding .h264 footage to proresslt. I want to transcode full clips that are used in the edit, but not any of the leftovers.

Editing a movie that was already cut together without transcoding .h264 footage to proresslt. I want to transcode full clips that are used in the edit, but not any of the leftovers. Is there an efficient way to this?
I'm thinking I can convert the files with Compressor and place them in a new folder with their original file names (not sure how to get compressor to do this yet) and then do a major "Reconnect Clip" afterwards.
Not sure if there's a more efficient way to get all the clips in the timeline to compressor. I want the full files, not a sequence export. I can go through one clip and a time and add the master file. I'd rather not.
The more automated processes the better.
Thank you. I'm currently working so I don't have the time to scour the forums. Help or links to help would be greatly appreciated.
B

yeah Media reconnect can be an issue.
Will Media Manager convert files? Another thing I was thinking was to Media Manage the sequence out, copying all the used files to a new folder, and then running that through compressor. But it still leads to a massive reconnect. Fine tuning all those edits would be less involved than re-editing the whole thing, I hope.

What are main events in that are used in ALV reports

hi gurus
what are main events in that are used in ALV reports....
regards
baskar

hi
i think this will help u.
Events in alv and their FM    The main events in alv and their FM and why we use these:
1. SLIS_PRINT_ALV.
2. SLIS_T_LISTHEADER.
3. SLIS_T_EVENT.
4. SLIS_T_SORTINFO_ALV.
5. SLIS_T_LAYOUT_ALV.
6. SLIS_T_FIELDCAT_ALV.
and in classic reports what is the sequence of events:   === Events are
At selection-screen output.
Initialization.
At selection-screen on field
At selection-screen on end of field
At selection-screen on Radiobutton Group R1. (If you have any radio buttons)
At selection-screen on block b1. (If you have any blocks)
Start-of-selection.
Get node. (if the data is retreived from a logical database)
Get node late. (if the data is retreived from a logical database)
Top-of-page. (if the write statement is in the end-of-selection event or we can say that before the first write statement)
end-of-selection.
and fuction modules are
LISTHEADER - Is used to print the header information in the ALV List. Name, Date, Time, ALV Name and other details are called as Header information.   EVENT - Basically this is the FM to handle Event's. When the user needs to do some event operation like when double clicking the a particular field we need to perform some operation.   These events are captured by this FM.   LAYOUT - This FM is used to define the layout of the List. There are many options available in this FM to define the Layout style.   FIELDCAT - These are used to populate the List header. We can change them according to our req.
User-defined Text Output Event
    Application
      print_end_of_list
    Define output text to be printed at the end of the entire list
      print_top_of_list
    Define output text to be printed at the beginning of the entire list
      print_end_of_page
    Define output text to be printed at the end of each page
      print_top_of_page
    Define output text to be printed at the beginning of each page
      subtotal_text
    Define self-defined subtotals texts
Mouse-controlled Actions in the Grid Control Event
    Application
      button_click
    Query a click on a pushbutton in the ALV Grid Control
      double_click
    Query a double-click on a cell of the ALV Grid control
      hotspot_click
    Query a hotspot click on columns defined for this purpose in advance
      onDrag
    Collect information when elements of the ALV Grid Control are dragged
      onDrop
    Process information when elements of the ALV Grid Control are dropped
      onDropComplete
    Perform final actions after successful Drag&Drop
      onDropGetFlavor
    Distinguish between options for Drag&Drop behavior
Processing of Self-defined and Standard Functions Event
    Application
      before_user_command
    Query self-defined and standard function codes
      user_command
    Query self-defined function codes
      after_user_command
    Query self-defined and standard function codes
Definition of Self-defined Functions Event
    Application
      toolbar
    Change, delete or add GUI elements in the toolbar
      menu_button
    Define menus for menu buttons in the toolbar
      context_menu_request
    Change context menu
      onf1
    Define self-defined F1 help
All of these can be found under type group SLIS.
Events
SLIS_EV_ITEM_DATA_EXPAND        TYPE SLIS_FORMNAME VALUE 'ITEM_DATA_EXPAND',
SLIS_EV_REPREP_SEL_MODIFY       TYPE SLIS_FORMNAME VALUE 'REPREP_SEL_MODIFY', SLIS_EV_CALLER_EXIT_AT_START TYPE SLIS_FORMNAME VALUE 'CALLER_EXIT',
SLIS_EV_USER_COMMAND              TYPE SLIS_FORMNAME VALUE 'USER_COMMAND',
SLIS_EV_TOP_OF_PAGE                     TYPE SLIS_FORMNAME VALUE 'TOP_OF_PAGE',
SLIS_EV_DATA_CHANGED                TYPE SLIS_FORMNAME VALUE 'DATA_CHANGED',
SLIS_EV_TOP_OF_COVERPAGE       TYPE SLIS_FORMNAME VALUE 'TOP_OF_COVERPAGE',
SLIS_EV_END_OF_COVERPAGE       TYPE SLIS_FORMNAME VALUE 'END_OF_COVERPAGE',
SLIS_EV_FOREIGN_TOP_OF_PAGE TYPE SLIS_FORMNAME
VALUE 'FOREIGN_TOP_OF_PAGE', SLIS_EV_FOREIGN_END_OF_PAGE TYPE SLIS_FORMNAME
VALUE 'FOREIGN_END_OF_PAGE',
SLIS_EV_PF_STATUS_SET                  TYPE SLIS_FORMNAME VALUE 'PF_STATUS_SET',
SLIS_EV_LIST_MODIFY                      TYPE SLIS_FORMNAME VALUE 'LIST_MODIFY',
SLIS_EV_TOP_OF_LIST                       TYPE SLIS_FORMNAME VALUE 'TOP_OF_LIST',
SLIS_EV_END_OF_PAGE                    TYPE SLIS_FORMNAME VALUE 'END_OF_PAGE',
SLIS_EV_END_OF_LIST                      TYPE SLIS_FORMNAME VALUE 'END_OF_LIST',
SLIS_EV_AFTER_LINE_OUTPUT       TYPE SLIS_FORMNAME VALUE 'AFTER_LINE_OUTPUT', SLIS_EV_BEFORE_LINE_OUTPUT     TYPE SLIS_FORMNAME VALUE 'BEFORE_LINE_OUTPUT',
SLIS_EV_SUBTOTAL_TEXT                TYPE SLIS_FORMNAME VALUE 'SUBTOTAL_TEXT'.
with regards
sravani
award points if found useful.

How to find all oaf pages that are using a table in their VOs

Hello everyone,
I need to findout all the View Objects and Entity Objects that are using a table lets say A. Is there a smart way to find out all the VOs and EO's that are using my table?
Thanks
Sunny

Technically there would be only one EO for your table (if its Oracle code). VOs contain queries and there might be many which refer the table.
One option I can think of is doing a table name search in the various (EO and VO) directories on JAVATOP. Its the XML (99% cases) that would have the queries. Rest 1% having dynamic VOs, it would be difficult to determine.
Regards

Internet sites that are using NW-EP

Similar Messages

Maybe you are looking for