Internet slow down after installing airport extreme.

I would like to know if there is a reason this slow down occurred. I have tried a locked setting and now have an unlocked setting. Unlocked because that was the only way I could get nintendo ds to work online. Any suggestions would be appreciated.

Beanziez, Welcome to the discussion area!
Unfortunately the Nintendo DS only supports WEP and not the much more secure WPA2 or WPA.
What slow down? You gave no information on this except asking the question.

Similar Messages

  • System slows down after installing AirPort Extreme Update 2007-001

    my macbook's internet related performance has been significantly slowed down recently. i have windows xp installed on my mac from where i can compare the performance of ie and safari or ie and firefox on mac. the result is ie on windows xp is much faster. the wireless connection is even more reliable and has more signal strenth under windows. these "slow" situations of mac only happens recently, and the only thing that i can think of to mark the change is the installation of AirPort Extreme Update 2007-001. please advise what i can do to bring back the good performance of mac. (i.e.:if i type in www.google.ca in the address bar of safari, the blue bar will just be stuck around "http://" for a long time before the simple page gets loaded while the status bar of safari is showing contacting google.ca)

    Same scenario here, though I'm running 10.4.9. on a Mac Pro. I've tried every known fix, but Safari still stalls every few minutes - taking upwards of a minute to continue loading whatever page I was browsing to.
    Other apps, including Mail, Firefox, and Remote Desktop screen sharing aren't affected - I can ping away without issue while Safari is choking, and there is no unusual Safari CPU consumption in Activity Monitor
    Mac Pro Mac OS X (10.4.9)

  • After installing airport extreme, can't recieve mail on comcast/outlook??

    After installing Airport Extreme my internet works well, however I can't recieve email on my comcast/outlook.  Outgoing works I have rechecked my settings and they all seem to be ok. Help?

    Hello mrpardue,
    We've an article that provides information and steps which can help get your mail moving again.
    OS X Mail: Troubleshooting sending and receiving email messages
    http://support.apple.com/kb/TS3276
    Cheers,
    Allen

  • Slow down after installing Lion OS

    My Macbook pro later than 2009 model slowed down after installing the new OS Lion
    any suggestions to speed it up

    First suggestion ,there have been a number of identical user questions like yours, in the Lion Community. If you want to talk to other MacBook Pro owners, try the forum they have.
    http://www.apple.com/support/macbookpro
    What you do not need is some gizmo to "speed up" or clean caches etc.
    Maybe you need to make more room on your hard drive, or add more RAM.
    For now, hold down Command-R and run Disk Utility to check the health of your system drive (Lion Recovery Mode)
    http://www.apple.com/support/lion

  • Has anyone noticed MacBook Air slowing down after installing Maverick

    Has anyone noticed MacBook Air slowing down after installing Maverick?

    Activity Monitor - Mavericks
    Activity Monitor in Mavericks has significant changes
    Performance Guide
    Why is my computer slow
    Why your Mac runs slower than it should
    Slow Mac After Mavericks
    Things you can do to resolve slowdowns  see post by Kappy

  • HT3024 after installing airport extreme card into g4 ibook 1.07ghz 512 ram it will only boot to open firmware, any ideas why? please help!

    after installing airport extreme card into g4 ibook 1.07ghz 512 ram it will only boot to open firmware, any ideas why? please help!

    Hi David,
    Have you done a PRAM reset, CMD+Option+p+r...
    http://support.apple.com/kb/HT1379
    In fact, do 3 in a row, takes a bit of time.
    Tried resetting the PMU for PB/iB?
    http://docs.info.apple.com/article.html?artnum=14449

  • Internet slow with G5 using Airport Extreme ethernet

    I have the reverse of everyone else's Airport issues-I run SLOWER on ethernet! I bought & installed Airport Extreme two days ago. It's running into a DSL modem which is set up as a bridge. Our wireless computers (iMac/Intel and Dell netbook) have no problems. My newest Mac (2.26 GHz Quad Core, OS 10.6, ethernet connected), is fine, but my G5 (pre-Intel Dual 2GHz PowerPC, OS 10.4.11), also connected via ethernet, is taking 40-50 seconds to load a page. The G5 doesn't even have wireless capability, so I never loaded those software updates. Because of this I thought the G5 might be having a problem communicating with Airport, even through ethernet, so last night I updated to the latest Airport Utility package for 10.4.11 (21-20-49.pkg) This didn't seem to help.
    I usually use Firefox, but tried Safari and Explorer-same problem. If I reset the DSL modem to standalone mode and connect the computer directly, the G5 downloads at its normal fast speed.
    One last thing, and it's really kind of weird. I went to Network Utility and 10-pinged a couple of sites (google & bbc.uk). The average speed on the G5 for google was 23.945. The average speed on the QuadCore was 24.479! Slower!! I may be misunderstanding what this means. A page that takes 60 seconds to load on the G5 will load in 4 seconds on the Quad.
    Is it Tiger? Is it because my G5 is pre-Intel? Is it because Airport doesn't like me? Please help!

    Changing ports didn't work. But then I thought of running from the G5 to a different ethernet line altogether (got one for clients on the other side of the room) and the downloads were spot on. I went back to the original config-wall jack to a Belkin UPS for isolation, out of the Belkin to the computer. Swapped all the ethernet patch cords with no difference, but taking the Belkin out of the equation solved the problem. Got to find another way to isolate though.
    Last thought: I don't know why the Airport and Belkin have this issue.

  • Trouble with Maya 8.5 after installing Airport Extreme

    Installed Airport Extreme 802.11n a couple weeks ago - using OS 10.4 on an iMac and 10.3 on G4 Quicksilver.
    Network is working fine.
    Tried to use Maya 8.5 this week and program freezes on startup. Only change to Mac system is installing network.
    Is Autodesk license manager unable to recognize computer with network setup?
    Thanks for any help.

    Maya not being able to recognize the license dat file will not cause Maya to lock up or crash. Have you run a Maya crash log to confirm what is causing this? Since upgrading from Tiger to Leopard I also upgraded to Maya 2008 (don't know why Autodesk didn't call it 9.0..lol) from 8.5. I haven't experienced any system crashes on Leopard, even on the MacBook Pro (Core 2 Duo 2.33 GHz, 3 GB RAM, ATI X1600). Note: I'm also using the AEBS in the SOHO and no issues with the license server.

  • Problems after installing Airport Extreme Update 2008-001

    ever since I installed the Airport Extreme update 2008-001 my internet connection has been dropping and it's so frustrating. I normally wait and don't install updates immediately after they are released. I installed this one and now my internet connection keeps dropping.
    Anyone have any suggestions??

    Same scenario here, though I'm running 10.4.9. on a Mac Pro. I've tried every known fix, but Safari still stalls every few minutes - taking upwards of a minute to continue loading whatever page I was browsing to.
    Other apps, including Mail, Firefox, and Remote Desktop screen sharing aren't affected - I can ping away without issue while Safari is choking, and there is no unusual Safari CPU consumption in Activity Monitor
    Mac Pro Mac OS X (10.4.9)

  • PowerMac G4 (FW 800) Won't Start After Installing Airport Extreme Card!

    After installing an Airport Extreme Card in my G4 FW 800, the computer will not Chime or Start Up; shortly thereafter, the Fan begins to Run erratically.
    Without the Airport Card installed, the CPU runs normal, with the exception of the clock needing to be reset.
    Any help is Greatly Appreciated! -Nico

    Hey Tom, thanks for the response. I have tried holding Command-Option-R-P down (resetting the PRAM) at startup with no avail. I have also pressed the PMU button with and without the Airport Card installed. Still no luck. I am pretty stumped. I ran a hardware check on the machine, and it has come back successful without the card.
    The previous owner installed an extra internal HD and some memory. I have since installed a new PCI graphics card. Do you think these have anything to do with it?

  • SAP GUI slow down after installed Eastern Asian Language Package

    Hello,
    Have any idea what happened to SAP GUI after installed Eastern Asian Language Package on Windows XP ?
    I am working on smartforms translations in SE63 and during entering the japanese or chinese text my working area is slowing down(problems with scrolling), like missing memory or sth?
    How to overcome it?
    Regards,
    Mateusz.

    There is a known performance problem with certain SAPGUI patches in certain constellations:
    Note 1460669 - Performance problems in SAP GUI for Windows
    You may try to install the newest patches or downgrade to a patch that does not have that problem.
    Markus

  • Cant restart MBP1.83 after installing AirPort Extreme Update 2007-001, Help

    Today I have installed that update on my macbook pro 1.83 mghz as the only update available, accordingly to apple software update utility. After a succesfull download and preinstallation, when I have restarted a lot of unix command lines appeared on a black screen. Then restarted again and the same thing happened (command lines stopping at a empty line). After a hard restart, the system tries to start but it stays on fisrt screen (apple logo with round timer keeping rotating).
    Help please!!! and be carefull anyone who tries to install this patch. Thanks!
    PS: I have tried disk check and permissions test and everything is ok, the problem continues
    Macbook Pro 1.83mghz   Mac OS X (10.4.8)   2Gb Ram

    You cant have a macbook pro 1.83 you must just have a normal macbook 1.83ghz processor. The lowest model of macbook pro has a 2.16ghz processor. I currently have a 2.0Ghz macbook core duo machine and after installing the airport update the machine restarted then came up with a dialog box instead of booting the os saying that i should do a hard restart in order for everything to work properly so once i did a hard restart by holding down the power button till the machine went off everything has worked fine so far.

  • My wifi printer is not recognised after installing airport extreme

    Hi,
    I have recently changed internet provider and took the opportunity to change router. I removed a netgear modem/router and installed a Draytek Vigor120 modem and Apple AirPort Extreme. My existing wifi HP all in one printer (which was working normal before change) is no longer recognised. I want to use the USB port on the extreme for an external hard drive so don't want to connect the printer to it. Any solutions? I am using an imac with OS X 10.8.3.

    Well the printer wont be recognized until it has been connected to the new wifi. Most wifi printers use either an LCD screen on them or software that came with them. You will likely need to reconfigure the printer so that it can connect to your new network.

  • IBook G4 won't start up after installing Airport Extreme card

    Hi,
    just installed an Airport Extreme Card into girlfriends iBook G4 (10.4.5), which now won't start up. After pressing the start button all I hear is the fan spin (pretty fast actually), but nothing else happens.
    When I remove the card the iBook starts up normally.
    Any thoughts what could be wrong? Bad card? Bad connection?
    Thanks a lot

    Sven, Welcome to the discussion area!
    Are you certain that you have an AirPort Extreme card?
    Are you certain that it is an iBook G4? The iBook G3s require the original AirPort card.
    If both of those are OK, then one (or more) of these is true:
    The card isn't installed correctly.
    The AirPort Extreme card is defective.
    The iBook's motherboard is defective.

  • Blank screen on my eMac after installing Airport Extreme Card

    I just bought and installed (the right way, I checked) the Airport Extreme card on my eMac G4 desktop and at first the computer couldn't find it at all and after restarting several times, now the computer turns on but the screen is absolutely blank. I took the card out and restarted and it came on just fine. Can the card be affecting the screen? ANy help appreciated, I have no idea on this one.

    This symptom is commonly seen when the Airport card is not FULLY seated into its socket. It can take a fair bit of force to do this.

Maybe you are looking for

  • Won't boot from 10.2 CD

    However I tell my computer to boot from my 10.2 CD, it won't get past the silver apple screen, specifically it gets there, the drive sounds like it's not able to read the CD, and the screen freezes with the same exact horizontal distortion thing. Kin

  • Duplicate PO

    hi Gurus, We can activate SAP standard functionlity of duplicate po check for sales document types in VOV8. I want to know this activation of field(Check po number in vov8 transaction for a sales document type) will determine duplicate PO even if PO

  • Vivid light blend mode

    I'm having a problem flattening a file with a layer set to Vivid Light mode. When flattening or stamping the effect disappears - any suggestion?

  • Printing comment in reader 8.0

    I am a long time reader but first time post. I have done plenty of search on this and found the solution but just need to clarify one thing. I was able to print comments in reader 8.0 via editing the registry. When it does print, it prints out the co

  • Need to best working compression setting vs space.

    Hi all, I am working with some uncompressed video clips they come in at 25 gb a clip. These are profesional animation clips I am looking to save some disk space and still get near the same quality. I am editing the clips for mobile use so i need to s