Internet slow on new iMac

Hi -
Strange things are going on with my iMac and internet. The iMac is new and up until a couple of weeks ago, it was on FiOS and the internet was blazing fast. We also have an old G4 Titanium laptop on the network wirelessly. The iMac had a wired connection.
We moved and the new place doesn't offer FiOS, so I'm using broadband cable, but with less than desirable internet performance. Pages take anywhere from seconds to minutes to load and often I get a timeout error. The laptop tends to get better performance with either wired or wireless connections than the iMac (also tried wirelessly and wired). I have tried the speedtest.net and pingtest.net. The speedtest came back with 20+ Mbps DL and 1.0 Mbps UL. The pingtest was bad with about 60% data lost.
I have been on the phone with the ISP and they couldn't see any problems on their end, so they sent a technician out to look it over. He couldn't see anything wrong with their service and setup, so he felt something was up with the iMac settings. I'm no expert, but that seems unlikely to me. I'm here to see if maybe there is something to what he said, or if he was just ignorant.
I have signed up with openDNS and that doesn't seem to make a difference. I have pinged the router/modem (Netgear), and get fast response with no data loss. I'm kind of at a loss. Anybody have ideas about this? Help is appreciated!

Hi - have a look at this thread: http://discussions.apple.com/thread.jspa?threadID=2312547&start=0&tstart=0
there's several suggestions for fixing slow internet speed. Doesn't seem that there is just one fix - different things seem to work for different people. Hopefully you'll stumble on a fix in the thread that works for you!

Similar Messages

  • Can't get on the internet with my new Imac.

    My new Imac arrived yesterday. It has Tiger installed and a Leopard disk in the box. I had already downloaded my usb broadband modem's drivers for Tiger 10.4.5 from my Isp and thought it would be a simple matter to install them. No chance! They won't work. It's running Tiger 10.4.10. The modem doesn't sync up and the computer says it doesn't exist. Then I had the bright idea of upgrading to Leopard and using Boot Camp to install Windows XP. Big mistake! I've only got an ancient XP upgrade disk and you need a full SP2 one. But of course I didn't find that out untill I'd put the disk in the superdrive. So now it's stuck in there. Every time I switch the computer on it just boots into the windows setup. Pressing F3 just reboots it into Windows setup. Does anybody know how I can get that cd out of my drive? And how do I get on the internet? My usb modem and it's driver works fine on an old powerbook running Panther.

    Hello again Nevertheless,
    Probably! - Possibly! Almost certainly! Hmmm...
    Belkin equipment has caused more problems than it had solved ( in my experience only )
    Netgear equipment has solved all the problems I have, so far, encountered.
    http://www.netgear.co.uk/wirelessadslrouterdg834g.php
    It's easy. It works and I DONT work for them.
    Regards once more.
    Ian
    Message was edited by a man in a dark suit, wearing Sunglasses.

  • Internet security for new iMAC? What do I use, What do I get, is there any?

    I just bought a new imac and i've swapt over from the other side (pc)
    I can't find any info on internet security software for macs. I'm startign to wonder if it's a built in thing exclusive to mac and comes with the OS or something.
    If there is such a thing, what do I get, what are people using.
    any advice would be more than useful
    cheers, John

    Hello John:
    Welcome to Apple discussions (and welcome from the dark side).
    Breathe a deep sigh of relief. There are NO documented viruses that affect a Mac running OS X - none. I do not use any AV software. IMHO, it is a waste of money and system resources.
    OS X has a built in firewall (default is off). It is robust. I suggest you enable it. This is from the OS X help section:
    +Using a firewall to protect your computer+
    +Mac OS X includes firewall software you can use to block unwanted network communication with your computer. Using a firewall protects your computer from users on other networks or the Internet.+
    +In order to use Mac OS X services, such as personal file sharing, Windows sharing, or FTP access, you need to open ports in the firewall to allow traffic for that service to and from your computer. When you select a service in the Services pane of Sharing preferences, it is automatically selected in the Firewall pane, and the port is opened.+
    +To prevent that service while the firewall is on, turn off the service in the Services pane.+
    +To turn on firewall protection on your computer:+
    +Open System Preferences and click Sharing.+
    +Click Firewall, and then click Start.+
    +To block incoming traffic on ports used by one of the sharing services, disable that service in the Services pane.+
    +You can't edit the firewall ports used by built-in services. They are enabled and disabled automatically when you turn the corresponding service on or off in the Services pane.+
    +If you use iChat Bonjour, iTunes Music Sharing, or iPhoto Bonjour Sharing, make sure to allow those services in and out of your firewall. Turn on their services on the Firewall pane of Sharing preferences.+
    There are also no instances (that I am aware of) of spyware or malware.
    Bottom line, enable the firewall and enjoy a very fine piece of hardware that also has a first class software platform.
    Barry

  • Internet problems with new iMac

    We bought a new iMac about a month ago and all of a sudden it's having issues connecting to the internet. I get the exclamation point in the wifi status. The password is correct, and all of our other apple devices connect just fine to the internet. When we unplug and plug the router back in, the imac will connect just fine, but this is really annoying to have to do after every time the computer falls asleep or gets turned on. Any ideas on why this might be happening and how to fix it

    Maybe there's some help here:
    http://osxdaily.com/2012/11/30/resolving-stubborn-wi-fi-connection-problems-in-m ac-os-x/
    If not, and the Mac is only a month old, it's worth using your warranty and calling AppleCare - 3 months free phone support, or 3 years if you have the extended AppleCare.

  • Permanent loss of Internet connection on new iMac - old G3 works fine

    After 1 month new iMac won't connect to Internet. (Cable modem/ethernet) All usual procedures tried - powering off modem/unplugging connection etc/rebooting. Network connections show valid addresses etc and modem shows correct lights - even sending/receiving!
    Reconnecting old G3 works immediately! So can't be problem with ISP or cable modem.
    Any ideas please?

    Update for anyone reading the first post.
    Solved the problem by archive & install 10.5 and updated again to 10.5.1 and other updates EXCEPT Security Update 2007-009 1.1 which I installed yesterday and coincided with accessing the net problem!
    Question - now to install this Security Update?!

  • Why is firewire 800 slow on new iMac?

    I have two, new G-drives.  One of them is used for off-site data storage.  I need to copy about 225 GB of data (a single data file) from one drive to the other each week.  Using my 13" MacBook Pro (2.66 GHz Intel Core Duo), the process takes about an hour.  Using the SAME drives and the SAME cables, it takes about 6 hours to copy the same amount of data using our brand, new 21" Intel iMac.  Obviously, the new, state-of-the-art iMac should AT LEAST be as fast as the year + old  MacBook Pro.  Any ideas how to get the iMac up to speed?
    Thanks!
    Philip

    Thanks to everyone who commented on this problem.  This morning I unplugged all the drives and the computer, came back to it five minutes later, plugged in the iMac and cleared the PRAM.  Then I plugged the firewire 800 drives in and began copying the now-259 GB datafile from one G-drive to the other.  The speed is back! It is copying a gigabyte every 20 seconds/ 3 gigs per minute. The 259 GB of data will copy in less than an hour-and-a-half.
    Main lesson learned: At least with these new iMacs and probably with all Macs, using a firewire 400 drive attached to the firewire 800 port will cause the system to switch itself into a firewire 400 mode and keep it there even after removal of the firewire 400 device(s).  Rebooting does not reset firewire 800 functionality.  Zapping the PRAM, however, does clear the problem allowing the computer to revert to firewire 800 functionality.  I had also unplugged the machine so maybe the SMC circuit was reset by that, too. The bottom line is this procedure worked. This experience makes me have to think about eliminating the firewire 400 drives from my systems.

  • Safari, mail, software update very slow on new imac

    Hello,
    I recently upgraded to a 21.5" i3 imac and transferred everything from my old imac (core 2 duo, os 10.4.10)
    anything involving the internet is painfully slow, safari 5.02, firefox, mail, even the software update (but once it "catches"- downloads are fast)
    I have tried the following:
    1.) Repaired disk permissions
    2.) Changed DNS
    3.) Reset Safari
    4.) Restarted computer
    5.) Disabled all plugins (only had one which was an adobe reader)
    No improvement- when I hookup my old computer- internet is fast.
    Now for the really disturbing part- when I run windows 7 inside parallels 6, internet explorer is quick!
    Help!

    Finally- the problem has been solved
    on the second call to the cable company they flashed/reset the modem and now it is working perfectly (roadrunner wideband)-
    the first time I called they just ran a diagnostic which appeared ok.
    the second time they flashed to modem.

  • Think it is about time to get internet security for new iMac. appreciate recommendation of product

    am interested in getting security for my imac g5. dont know of a good product. Have eset on my pc's is highly rated.

    There are many forms of ‘Malware’ that can affect a computer system, of which ‘a virus’ is but one type, ‘trojans’ another. Using the strict definition of a computer virus, no viruses that can attack OS X have so far been detected 'in the wild', i.e. in anything other than laboratory conditions. The same is not true of other forms of malware, such as Trojans. Whilst it is a fairly safe bet that your Mac will NOT be infected by a virus, it may have other security-related problem, but more likely a technical problem unrelated to any malware threat.
    You may find this User Tip on Viruses, Trojan Detection and Removal, as well as general Internet Security and Privacy, useful: The User Tip seeks to offer guidance on the main security threats and how to avoid them.
    https://discussions.apple.com/docs/DOC-2435
    More useful information can also be found here:
    www.thesafemac.com/mmg

  • Safari Painfully Slow on new iMac

    I just got this computer yesterday, so it's state of the art and yet, Safari is totally irritating. It's slower on this computer that on my G4!!!!!!!!! I'm using DSL w/ethernet. Any suggestions?

    Network panel in Tiger is different than Leopard.
    Follow these directions:
    -Location - set up a personal location by clicking on the location drop down menu and selecting "add a location". Use a name familiar to you. Once established, select "apply".
    -Next, click on the "Show" drop down menu and select Network Port Configurations. Depending on whether you use Ethernet or Airport (wireless) for your setup: Only Ethernet or Airport ought to be checked. Move it to the top of the list (you can drag it). Select "apply". Everything else ought to be unchecked unless you use a Bluetooth device.
    -Back to the "Show" menu, select either "Ethernet" or "Airport" (whichever applies to you). Click on the TCP panel. There, if you live outside the US enter 208.67.222.220 and 208.67.220.222 (separate lines) in the DNS servers box - these are Opensource DNS codes. and select "apply". If you live in the US use Verizon's 4.2.2.1 and 4.2.2.2 public codes instead of the OpenDNS codes.

  • New iMac wireless internet crashes repeatedly -- why?

    Just set up the following wireless LAN: Netgear WGT624v3 wireless router as access point between a broadband cable modem, a new 27" iMac, a PowerBook G4, and a Canon wireless printer. Everything works great except for one thing: whenever I'm trying to use the internet on the new iMac, my internet connection crashes and I have to manually reset the modem and router. This happens when downloading a file even as small as 2 Mb. As you can imagine, this has become incredibly irritating, as none of us can get anything done on our new computer without me having to come over and flip a switch on the power strip to repeatedly reset the internet connection.
    The Netgear router is about as old as the PowerBook (3+ years)--I see it's listed "EOL" (end-of-life) on the Netgear website, and I'm wondering if it may not be powerful enough to handle the new iMac? That's the only thing I can think of, since using the internet with the PowerBook causes no problems at all. I don't understand the subtleties of Airport v. Airport Extreme, 802.11b, g, n or whatever, to figure this out on my own.
    Anyone had a similar problem and/or can confirm that the router is the culprit before I needlessly spend money on a new one?

    Some things you can try, if you haven't already:
    -Make sure you don't have any cordless phone base stations operating near your router.
    -Are any other electrical appliances (like microwave ovens or fluorescent bulbs) operating when your wireless connection fails?
    -Power down the router and the iMac, then restart each.
    -Change the channel your router uses to broadcast its signal. You should be able to do this from the web browser interface most routers support.
    -Check Netgear's support website for firmware updates. Some routers can be commanded to check this from the web browser interface.
    Message was edited by: inandoutofgrace

  • New iMac Wifi Problem!

    Sometime the wi-fi connection freezes and internet doesn't work in the new iMac 21".
    How do I fix this?
    Thank you!

    Thanks, but I have no problems with the wireless network. My MacbookPro, iPhone works perfectly with my wireless network and I live in my house without the neighbors. But the Internet to a new iMac freezes sometimes (especially after sleep) and I have to reboot the iMac. My iMac has been updated.

  • Help! Just want to share DSL between new iMac & existing Windows laptop

    I have existing laptop running on Windows XP, connected to a DSL modem via ethernet cable. The modem also has an additional USB slot.
    I want to access the Internet from my new iMac G5, using the same DSL line, but not share anything (files, printer, etc) with the laptop (in other words, I have no desire to "network" with the laptop).
    Can I just connect the iMac using the USB port? Also, do I need a router/firewall to make things easier/more secure?
    iMac G5   Mac OS X (10.4.3)  
    iMac G5   Mac OS X (10.4.3)  

    Theoretically you could connect to the modem via USB, but other than Alcatel, no other modem manufacturer supplies USB drivers for Mac, and even those Alcatel's are not that reliable.
    Yes, a NetGear router would work. Pretty much any router, as networking and IP are platform independent and will work with any OS.
    12064

  • Super-slow internet browsing on brand-new iMac

    I posted this somewhere else and got told to post it here - so here goes:
    I just bought my iMac on Valentine's Day. I'm brand new to the world of Mac, and very excited!
    However - I'm a little upset because it is taking FOREVER for websites to load on Safari - sometimes up to a full minute for a page to load entirely. Sometimes, it simply times out! My internet access is through broadband service provided by my cable company; all computers in the house (including my PC laptop) are wirelessly connected. No problems with any of them BUT the iMac. Also, all other applications on the iMac run very fast indeed.
    I really don't think that at $1,500, internet browsing should be this slow on an iMac right out of the box!!! Is there anything I can do? Is this a known problem with a known fix? Or should I just take it back and exchange it? (and migrate all my old files AGAIN!)
    Thanks for any help/advice you can give.

    Try the command under the Safari menu in Safari to +Reset Safari+. I would select all the reset options.
    If that does not help, try downloading another browser as a test to see if this is a general problem or something specific to Safari.
    You can try
    http://caminobrowser.org/
    http://www.mozilla.com/en-US/firefox/
    http://www.opera.com/

  • New iMac slowing down entire network's internet

    I recently purchased a new iMac (warning, I'm a PC user up until a few days ago), and have noticed that any time I have the iMac on (idle, having just started up) the internet for the other 2 computers on the networks drags terrible (long page load times, etc)
    It's as if the new machine is hogging up all the bandwidth, while doing nothing.
    I've experienced this problem in the past, when my younger brother was home from college & had his macbook. Any time he was on his macbook, the connection for the rest of the network would become unreliable. This was on a completely different network from the one I'm currently having a problem with.
    Has anyone else run into this problem?
    Being new to Macs, I'm not even sure where to start looking for the problem.
    Any help/feedback would be greatly appreciated.
    Thanks.

    Welcome to Apple Discussions.
    I'd start by going to System Preferences > Network click on Ethernet or Airport or both and be sure your setup is correct. There's an "Assist me" button in each.
    EDIT: I'd also suggest you take a look atSwitch 101. There's a wealth of info there.
    -mj
    Message was edited by: macjack

  • New iMac running 10.10.1 frequently pauses, way too slow

    I recently bought a 27 inch iMac, installed Yosemite, and migrated my files by time machine from a 5 year old macbook Pro running Snow Leopard. Since updating to 10.10.1, I frequently get the spinning beachball while I wait to continue, and everything seems much slower than it should. Safari downloads take forever, compared to Firefox. I ran an EtreCheck report pasted below. I tried some easy fixes like removing desktop clutter, reducing transparency, but that doesn't affect the overall slowness. Any solutions welcome!
    Problem description:
    Installed Yosemite on new iMac, migrating from snow leopard on an older macbook pro.  Instead of being fast, processes frequently pause for bit while the beachball spins, then resume. Way too slow, much slower than my old macbook pro.
    EtreCheck version: 2.0.11 (98)
    Report generated November 24, 2014 at 5:06:30 PM EST
    Hardware Information: ℹ️
      iMac (27-inch, Late 2013) (Verified)
      iMac - model: iMac14,2
      1 3.2 GHz Intel Core i5 CPU: 4-core
      8 GB RAM Upgradeable
      BANK 0/DIMM0
      4 GB DDR3 1600 MHz ok
      BANK 1/DIMM0
      4 GB DDR3 1600 MHz ok
      BANK 0/DIMM1
      empty empty empty empty
      BANK 1/DIMM1
      empty empty empty empty
      Bluetooth: Good - Handoff/Airdrop2 supported
      Wireless:  en1: 802.11 a/b/g/n/ac
    Video Information: ℹ️
      NVIDIA GeForce GT 755M - VRAM: 1024 MB
      iMac 2560 x 1440
    System Software: ℹ️
      OS X 10.10.1 (14B25) - Uptime: 2:7:57
    Disk Information: ℹ️
      APPLE HDD ST1000DM003 disk0 : (1 TB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Macintosh HD (disk0s2) /  [Startup]: 999.35 GB (749.24 GB free)
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
    USB Information: ℹ️
      Apple Inc. FaceTime HD Camera (Built-in)
      Apple Inc. BRCM20702 Hub
      Apple Inc. Bluetooth USB Host Controller
      Western Digital Ext HDD 1021 2 TB
      S.M.A.R.T. Status: Verified
      EFI (disk2s1) <not mounted> : 210 MB
      Time Machine New (disk2s2) /Volumes/Time Machine New : 2.00 TB (193.57 GB free)
      Seagate Expansion Desk 2 TB
      S.M.A.R.T. Status: Verified
      NewArchive (disk3s1) /Volumes/ NewArchive : 2.00 TB (11.39 GB free)
      Western Digital Ext HDD 1021 1 TB
      S.M.A.R.T. Status: Verified
      EFI (disk1s1) <not mounted> : 210 MB
      Bootable Backup New (disk1s2) /Volumes/Bootable Backup New : 500.10 GB (254.99 GB free)
      Storage New (disk1s3) /Volumes/Storage New : 499.62 GB (480.72 GB free)
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /System/Library/Extensions
      [loaded] com.Cycling74.driver.Soundflower (1.5.1) Support
      [not loaded] com.Logitech.Control Center.HID Driver (3.6.0 - SDK 10.6) Support
      [not loaded] com.Logitech.Unifying.HID Driver (1.2.0 - SDK 10.6) Support
      [loaded] com.avira.kext.FileAccessControl (1.0.0d1 - SDK 10.9) Support
      [not loaded] com.beceem.BeceemAppleWiMAXAdapter (5.2.56d13) Support
      [not loaded] com.fklt.driver (1.8.0) Support
      [not loaded] com.flipvideo.IOUSBCameraMassStorage (1.0.1) Support
      [not loaded] com.novatelwireless.driver.3G (2.2.8) Support
      [not loaded] com.novatelwireless.driver.DisableAutoInstall (1.2) Support
      [not loaded] com.rogueamoeba.InstantOn (6.0.3 - SDK 10.6) Support
      [not loaded] com.sierrawireless.driver.SierraDevSupport (2.0.2) Support
      [not loaded] com.sierrawireless.driver.SierraFSCSupport (2.0.2) Support
      [not loaded] com.sierrawireless.driver.SierraFSRSupport (2.0.2) Support
      [not loaded] com.sierrawireless.driver.SierraHSRSupport (2.0.2) Support
      /System/Library/Extensions/InstantOn.kext/Contents/PlugIns
      [not loaded] com.rogueamoeba.InstantOnCore (6.0.3 - SDK 10.6) Support
      /System/Library/Extensions/NovatelWireless3G.kext/Contents/PlugIns
      [not loaded] com.novatelwireless.driver.3GData (2.2.8) Support
      /Volumes/Bootable Backup New/Applications/ CD burn & label ƒ/Toast 8.0.5 Titanium ƒ/Toast Titanium.app
      [not loaded] com.roxio.BluRaySupport (1.1.6) Support
      [not loaded] com.roxio.TDIXController (1.7) Support
      /Volumes/Bootable Backup New/Applications/ Multimedia ƒ/TuneClone ƒ/TuneClone.app
      [not loaded] com.tuneclone.driver.TuneClone_Virtual_CDWriter (1.0.0d1) Support
      /Volumes/Bootable Backup New/Applications/ My Utilities ƒ/Little Snitch 2.2 ƒ/Little Snitch Installer.app
      [not loaded] at.obdev.nke.LittleSnitch (2.2.05) Support
      /Volumes/Bootable Backup New/Applications/Cloak.app
      [not loaded] com.bourgeoisbits.cloak.tun (1.0.1) Support
      /Volumes/Bootable Backup New/Applications/Utilities/DiskWarrior ƒ/DiskWarrior.app
      [not loaded] com.alsoft.Preview (4.2) Support
    Startup Items: ℹ️
      NoteburnerService: Path: /System/Library/StartupItems/NoteburnerService
      M-Audio FireWire Audio Helper: Path: /Library/StartupItems/M-Audio FireWire Audio Helper
      Startup items are obsolete and will not work in future versions of OS X
    Launch Agents: ℹ️
      [loaded] com.avira.antivirus.general.agent.plist Support
      [loaded] com.avira.antivirus.ipm.ui.plist Support
      [failed] com.avira.antivirus.notifications.agent.plist Support
      [loaded] com.avira.antivirus.odscan.default.plist Support
      [loaded] com.avira.antivirus.scheduler.agent.plist Support
      [running] com.avira.antivirus.systray.plist Support
      [loaded] com.avira.antivirus.telemetry.agent.plist Support
      [loaded] com.avira.antivirus.update.default.plist Support
      [running] com.flipvideo.FlipShare.AutoRun.plist Support
      [loaded] com.google.keystone.agent.plist Support
      [running] com.Logitech.Control Center.Daemon.plist Support
      [loaded] com.smithmicro.cleaning.quickbackupcheck.plist Support
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist Support
      [not loaded] com.atomicbird.macaroni.launchd.plist Support
      [failed] com.avira.antivirus.dbcleaner.plist Support
      [loaded] com.avira.antivirus.ipm.loader.plist Support
      [running] com.avira.helper.watchdox.plist Support
      [loaded] com.barebones.bbedit.plist Support
      [loaded] com.bombich.ccc.plist Support
      [invalid?] com.bombich.ccc.scheduledtask.EE7EE552-88D4-41A7-BB96-B7F2F891EA0D.plist Support
      [running] com.bombich.ccchelper.plist Support
      [running] com.flipvideo.FlipShareServer.launchd.plist Support
      [loaded] com.google.keystone.daemon.plist Support
      [running] com.m-audio.firewire.helper.plist Support
      [loaded] com.microsoft.office.licensing.helper.plist Support
      [loaded] com.sibelius.sari.plist Support
      [invalid?] com.sierrawireless.SierraReset.plist Support
      [running] com.sierrawireless.SWoCMon.plist Support
      [running] com.smithmicro.schedulerdaemon.plist Support
    User Launch Agents: ℹ️
      [loaded] com.adobe.ARM.[...].plist Support
      [invalid?] com.bombich.ccc-user-agent.plist Support
      [running] com.c-command.SpamSieve.LaunchAgent.plist Support
      [running] com.smithmicro.cleaning.schedulermailer.plist Support
      [running] com.spotify.webhelper.plist Support
      [running] ws.agile.1PasswordAgent.plist Support
    User Login Items: ℹ️
      Garmin Express Service Application (/Applications/Garmin Express.app/Contents/Library/LoginItems/Garmin Express Service.app)
      GrowlMenu Application (/Library/PreferencePanes/Growl.prefPane/Contents/Resources/GrowlMenu.app)
      Dropbox Application (/Applications/Dropbox ƒ/Dropbox.app)
    Internet Plug-ins: ℹ️
      AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
      Flash Player: Version: 15.0.0.223 - SDK 10.6 Support
      AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
      Scorch: Version: (null) - SDK 10.2 Support
      SpeedDownload Browser Plugin: Version: 2.1.5 - SDK 10.6 Support
      iPhotoPhotocast: Version: 7.0 - SDK 10.7
      Myriad Music Plugin: Version: 5.6.2 Support
      RealPlayer Plugin: Version: (null) Support
      DirectorShockwave: Version: 11.5.0r596 Support
      QuickTime Plugin: Version: 7.7.3
      FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 Support
      GarminGpsControl: Version: 4.0.4.0 Release - SDK 10.6 Support
      AmazonMP3DownloaderPlugin: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 Support
      AmazonMP3DownloaderPlugin1017277: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 Support
      DivXBrowserPlugin: Version: 2.1 Support
      CouponPrinter-FireFox: Version: Version 1.1.5
      CANONiMAGEGATEWAYDL: Version: 3.1.0.2 Support
      OVSHelper: Version: 1.1 Support
      Google Earth Web Plug-in: Version: 7.1 Support
      AmazonMP3DownloaderPlugin101750: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 Support
      Default Browser: Version: 600 - SDK 10.10
      Flip4Mac WMV Plugin: Version: 2.4.4.2 Support
      SharePointBrowserPlugin: Version: 14.4.6 - SDK 10.6 Support
      Silverlight: Version: 5.1.30214.0 - SDK 10.6 Support
      JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
      OfficeLiveBrowserPlugin: Version: 12.2.7 Support
    Safari Extensions: ℹ️
      Videobox
      DivX Plus Web Player HTML5 <video>
      PriceBlink-1
      Speed Download
      Add To Amazon Wish List
      Exposer
      Discount Search for Amazon
      StumbleUpon
      WOT-1
      1Password
      YouTube Downloader
      Rotten Tomatoes
      Compass
    3rd Party Preference Panes: ℹ️
      3ivx MPEG-4  Support
      A Better Finder Preferences  Support
      RCDefaultApp
      DivX  Support
      Flash Player  Support
      Flip4Mac WMV  Support
      Growl  Support
      PreferencesPane  Support
      Macaroni  Support
      Perian  Support
    Time Machine: ℹ️
      Skip System Files: NO
      Auto backup: YES
      Volumes being backed up:
      Macintosh HD: Disk size: 999.35 GB Disk used: 250.11 GB
      Destinations:
      Time Machine New [Local]
      Total size: 2.00 TB
      Total number of backups: 33
      Oldest backup: 2014-11-13 07:38:50 +0000
      Last backup: 2014-11-24 21:19:47 +0000
      Size of backup disk: Adequate
      Backup size 2.00 TB > (Disk used 250.11 GB X 3)
    Top Processes by CPU: ℹ️
          3% WindowServer
          1% avlogwriter
          1% loginwindow
          1% avguard-ondemand-mgmt
          0% fontd
    Top Processes by Memory: ℹ️
      601 MB savapi
      352 MB mds_stores
      309 MB avguard.bin
      301 MB loginwindow
      206 MB Mail
    Virtual Memory Information: ℹ️
      2.80 GB Free RAM
      3.83 GB Active RAM
      978 MB Inactive RAM
      974 MB Wired RAM
      5.87 GB Page-ins
      0 B Page-outs

    Start time: 10:22:44 01/10/15
    Model Identifier: iMac11,1
    System Version: OS X 10.10.1 (14B25)
    Kernel Version: Darwin 14.0.0
    Time since boot: 20:24
    SATA
       Hitachi HDS722020ALA330                
    USB
       Hub (NEC Corporation)
       Backup+ Desk (Seagate LLC)
       Backup+  Desk (Seagate LLC)
       Backup+  Desk (Seagate LLC)
       Backup+  Desk (Seagate LLC)
       Backup+  Desk (Seagate LLC)
       Backup+  Desk (Seagate LLC)
       Backup+  Desk (Seagate LLC)
       My Book 1110 (Western Digital Technologies, Inc.)
       Backup+  Desk (Seagate LLC)
       Hub (NEC Corporation)
       Backup+ Desk (Seagate LLC)
       My Book 1110 (Western Digital Technologies, Inc.)
       Backup+  Desk (Seagate LLC)
       hp LaserJet 3380 (Hewlett Packard)
       Officejet Pro 8600 (Hewlett Packard)
    Diagnostic reports
       2014-12-19 DashlaneAgent crash
       2014-12-21 QuickLookSatellite crash
       2014-12-22 DashlaneAgent crash
       2014-12-27 DashlaneAgent crash
       2014-12-28 HelpViewer crash
       2014-12-30 DashlaneAgent crash
       2015-01-05 Microsoft Word hang
    Log
       Jan 10 10:19:18 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
       Jan 10 10:19:28 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
       Jan 10 10:19:38 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
       Jan 10 10:19:48 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
       Jan 10 10:19:59 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
       Jan 10 10:20:09 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
       Jan 10 10:20:19 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
       Jan 10 10:20:29 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
       Jan 10 10:20:39 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
       Jan 10 10:20:49 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
       Jan 10 10:20:59 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
       Jan 10 10:21:09 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
       Jan 10 10:21:19 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
       Jan 10 10:21:29 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
       Jan 10 10:21:39 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
       Jan 10 10:21:49 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
       Jan 10 10:21:59 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
       Jan 10 10:22:09 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
       Jan 10 10:22:19 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
       Jan 10 10:22:29 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
       Jan 10 10:22:39 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
       Jan 10 10:22:49 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
       Jan 10 10:22:59 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
       Jan 10 10:23:09 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
       Jan 10 10:23:19 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
    Memory: kernel_task (UID 0) is using 1332 MB
    kexts
       com.seagate.driver.PowSecDriverCore (5.2.6)
       com.seagate.driver.PowSecLeafDriver_10_5 (5.2.6)
       com.vmware.kext.vmci (90.5.7)
       com.vmware.kext.vsockets (90.5.7)
       com.vmware.kext.vmnet (0188.79.83)
       com.vmware.kext.vmx86 (0188.79.83)
       com.vmware.kext.vmioplug.12.1.17 (12.1.17)
    Daemons
       com.carbonite.daemon
       com.apple.installer.osmessagetracing
       com.microsoft.office.licensing.helper
       com.oracle.java.Helper-Tool
       com.apple.aelwriter
       com.adobe.fpsaud
       com.bombich.ccchelper
       com.seagate.TBDecorator.plist
       com.bombich.ccc
    Agents
       com.sony.PMBPortable.AutoRun
       com.bombich.ccc-user-agent
       com.google.Chrome.framework.service_process/Users/USER/Library/Application_Supp ort/Google/Chrome
       com.leadertech.PowerRegister.SEA1.UUID
       com.adobe.AdobeCreativeCloud
       com.carbonite.carbonitestatus
       com.adobe.PDApp.AAMUpdatesNotifier.96592.UUID
       com.apple.MassStorageCamera.315272.UUID
       com.adobe.ARM.UUID
       com.bombich.cccuseragent
       com.seagate.dashboard
       com.adobe.CS5ServiceManager
       com.oracle.java.Java-Updater
       com.citrixonline.GoToMeeting.G2MUpdate
       com.adobe.ARM.UUID
       com.google.keystone.user.agent
       com.apple.AirPortBaseStationAgent
       com.hp.scanModule3.64216.UUID
       com.carbonite.carbonitealerts
    Startup items
       /Library/StartupItems/HP IO/HP IO
       /Library/StartupItems/HP IO/StartupParameters.plist
       /Library/StartupItems/HP USB EWS Gateway/HP USB EWS Gateway
       /Library/StartupItems/HP USB EWS Gateway/StartupParameters.plist
       /Library/StartupItems/HPlaserjet Trap Monitor/HPlaserjet Trap Monitor
       /Library/StartupItems/HPlaserjet Trap Monitor/StartupParameters.plist
       /Library/StartupItems/VirtualBox/StartupParameters.plist
       /Library/StartupItems/VirtualBox/VirtualBox
    Bundles
       /System/Library/Extensions/JMicronATA.kext
       - com.jmicron.JMicronATA
       /System/Library/Extensions/MicrosoftMouse.kext
       - com.microsoft.driver.MicrosoftMouse
       /System/Library/Extensions/Seagate Storage Driver.kext
       - com.seagate.driver.PowSecDriverCore
       /Library/Extensions/VBoxDrv.kext
       - org.virtualbox.kext.VBoxDrv
       /Library/Extensions/VBoxNetAdp.kext
       - org.virtualbox.kext.VBoxNetAdp
       /Library/Extensions/VBoxNetFlt.kext
       - org.virtualbox.kext.VBoxNetFlt
       /Library/Extensions/VBoxUSB.kext
       - org.virtualbox.kext.VBoxUSB
       /Library/Internet Plug-Ins/AdobeAAMDetect.plugin
       - com.AdobeAAMDetectLib.AdobeAAMDetect
       /Library/Internet Plug-Ins/AdobeExManDetect.plugin
       - com.AdobeExManDetectLib.AdobeExManDetect
       /Library/Internet Plug-Ins/AdobePDFViewer.plugin
       - com.adobe.acrobat.pdfviewer
       /Library/Internet Plug-Ins/AdobePDFViewerNPAPI.plugin
       - com.adobe.acrobat.pdfviewerNPAPI
       /Library/Internet Plug-Ins/EPPEX Plugin.plugin
       - N/A
       /Library/Internet Plug-Ins/Flash Player.plugin
       - N/A
       /Library/Internet Plug-Ins/JavaAppletPlugin.plugin
       - com.oracle.java.JavaAppletPlugin
       /Library/Internet Plug-Ins/SharePointBrowserPlugin.plugin
       - com.microsoft.sharepoint.browserplugin
       /Library/Internet Plug-Ins/SharePointWebKitPlugin.webplugin
       - com.microsoft.sharepoint.webkitplugin
       /Library/Internet Plug-Ins/Silverlight.plugin
       - com.microsoft.SilverlightPlugin
       /Library/PreferencePanes/Carbonite.prefPane
       - com.carbonite.prefpanel
       /Library/PreferencePanes/DashboardPreferences.prefPane
       - com.seagate.dashboard.preferences
       /Library/PreferencePanes/Flash Player.prefPane
       - com.adobe.flashplayerpreferences
       /Library/PreferencePanes/Growl.prefPane
       - com.growl.prefpanel
       /Library/PreferencePanes/JavaControlPanel.prefPane
       - com.oracle.java.JavaControlPanel
       /Library/PreferencePanes/Microsoft Mouse.prefPane
       - com.microsoft.microsoftmouse
       /Library/ScriptingAdditions/Adobe Unit Types.osax
       - N/A
       Library/Address Book Plug-Ins/SkypeABDialer.bundle
       - com.skype.skypeabdialer
       Library/Address Book Plug-Ins/SkypeABSMS.bundle
       - com.skype.skypeabsms
       Library/Caches/com.apple.Safari/Extensions/Dashlane-2.safariextension
       - com.dashlane.dashlanesafari
       Library/Internet Plug-Ins/CitrixOnlineWebDeploymentPlugin.plugin
       - com.citrixonline.mac.WebDeploymentPlugin
       Library/Internet Plug-Ins/Dashlane.plugin
       - com.DashlaneLib.Dashlane
       Library/Internet Plug-Ins/Google Earth Web Plug-in.plugin
       - com.Google.GoogleEarthPlugin.plugin
       Library/Widgets/HP Ink Widget.wdgt
       - com.hp.widget.inkwidget
    Apps
       /Volumes/iMac27 Desktop Clone/Applications/Google Drive.app
       /Volumes/iMac27 Desktop Clone/Applications/Google Drive 2.app
       /Applications/Google Drive.app
       /Applications/Google Drive 2.app
    Contents of /System/Library/LaunchDaemons/com.seagate.TBDecorator.plist (checksum 3070240373)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <!--
          com.seagate.TBDecorator.plist
          SeagateDiagnostics
          Created by John Brisbin on 3/10/10.
          Copyright 2010 Seagate Technologies LLC.. All rights reserved.
       -->
       <plist version="1.0">
       <dict>
        <key>KeepAlive</key>
        <true/>
        <key>Label</key>
        <string>com.seagate.TBDecorator.plist</string>
        <key>RunAtLoad</key>
        <true/>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/Application Support/Seagate/TBLoopDriveParams</string>
        </array>
       </dict>
       </plist>
    Contents of /Library/LaunchAgents/com.carbonite.launchd.carbonitealerts.plist (checksum 3096452879)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Disabled</key>
        <false/>
        <key>Label</key>
        <string>com.carbonite.carbonitealerts</string>
        <key>OnDemand</key>
        <true/>
        <key>RunAtLoad</key>
        <false/>
        <key>WatchPaths</key>
        <array>
        <string>/Library/Application Support/Carbonite/CarboniteAlerts.app/Contents/Resources/</string>
        </array>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/Application Support/Carbonite/CarboniteAlerts.app/Contents/MacOS/CarboniteAlerts</string>
        </array>
       </dict>
       </plist>
    Contents of /Library/LaunchAgents/com.carbonite.launchd.carbonitestatus.plist (checksum 2411194237)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Disabled</key>
        <false/>
        <key>Label</key>
        <string>com.carbonite.carbonitestatus</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/Application Support/Carbonite/CarboniteStatus.app/Contents/MacOS/CarboniteStatus</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        <key>OnDemand</key>
        <false/>
       </dict>
       </plist>
    Contents of /Library/LaunchAgents/com.oracle.java.Java-Updater.plist (checksum 1821332316)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Label</key>
        <string>com.oracle.java.Java-Updater</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/Internet Plug-Ins/JavaAppletPlugin.plugin/Contents/Resources/Java Updater.app/Contents/MacOS/Java Updater</string>
        <string>-bgcheck</string>
        </array>
        <key>StandardErrorPath</key>
        <string>/dev/null</string>
        <key>StandardOutPath</key>
        <string>/dev/null</string>
        <key>StartCalendarInterval</key>
        <dict>
        <key>Hour</key>
        <integer>16</integer>
        <key>Minute</key>
        <integer>33</integer>
        <key>Weekday</key>
        <integer>4</integer>
        </dict>
       </dict>
       ...and 1 more line(s)
    Contents of /Library/LaunchAgents/com.sony.PMBPortable.AutoRun.plist (checksum 2288250257)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>KeepAlive</key>
        <false/>
        <key>Label</key>
        <string>com.sony.PMBPortable.AutoRun</string>
        <key>OnDemand</key>
        <true/>
        <key>Program</key>
        <string>/Library/Application Support/Sony/PMBPortableAutoRun.app/Contents/MacOS/PMBPortableAutoRun</string>
        <key>RunAtLoad</key>
        <true/>
       </dict>
       </plist>
    Contents of /Library/LaunchAgents/com.teamviewer.teamviewer.plist (checksum 2593636600)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Debug</key>
        <true/>
        <key>Disabled</key>
        <true/>
        <key>Label</key>
        <string>com.teamviewer.teamviewer</string>
        <key>LimitLoadToSessionType</key>
        <string>Aqua</string>
        <key>OnDemand</key>
        <false/>
        <key>ProgramArguments</key>
        <array>
        <string>/Applications/TeamViewer 8/TeamViewer.app/Contents/MacOS/TeamViewer</string>
        <string>-RunAsAgent</string>
        <string>YES</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        <key>WorkingDirectory</key>
        <string>/Applications/TeamViewer 8/TeamViewer.app/Contents/MacOS</string>
       </dict>
       ...and 1 more line(s)
    Contents of /Library/LaunchAgents/com.teamviewer.teamviewer_desktop.plist (checksum 2362964135)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Debug</key>
        <true/>
        <key>Disabled</key>
        <true/>
        <key>Label</key>
        <string>com.teamviewer.desktop</string>
        <key>LimitLoadToSessionType</key>
        <array>
        <string>LoginWindow</string>
        <string>Aqua</string>
        </array>
        <key>OnDemand</key>
        <false/>
        <key>ProgramArguments</key>
        <array>
        <string>/Applications/TeamViewer 8/TeamViewer.app/Contents/Resources/TeamViewer_Desktop</string>
        <string>-RunAsAgent</string>
        <string>YES</string>
        <string>-Module</string>
        <string>Full</string>
        </array>
       ...and 6 more line(s)
    Contents of /Library/LaunchDaemons/com.bombich.ccc.plist (checksum 3730953884)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Disabled</key>
        <false/>
        <key>Label</key>
        <string>com.bombich.ccc</string>
        <key>OnDemand</key>
        <true/>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/PrivilegedHelperTools/com.bombich.ccc</string>
        </array>
        <key>ServiceIPC</key>
        <true/>
        <key>Sockets</key>
        <dict>
        <key>MasterSocket</key>
        <dict>
        <key>SockFamily</key>
        <string>Unix</string>
        <key>SockPathMode</key>
        <integer>438</integer>
        <key>SockPathName</key>
       ...and 7 more line(s)
    Contents of /Library/LaunchDaemons/com.bombich.ccc.scheduledtask.UUID.plist (checksum 1847580806)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Disabled</key>
        <true/>
        <key>Label</key>
        <string>com.bombich.ccc.scheduledtask.UUID</string>
        <key>OnDemand</key>
        <false/>
        <key>ProgramArguments</key>
        <array>
        <string>/Users/USER/Downloads/Carbon Copy Cloner.app/Contents/MacOS/ccchelper.app/Contents/MacOS/ccchelper</string>
        <string>UUID</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        <key>ServiceDescription</key>
        <string>CCC will copy the selected items from "Media Disk" to "Music". If you have backed up to this destination in the past, only items that have been modified since the last backup task will be copied.
       • Files and folders unique to the destination will be left alone.
       • Files on the destination will be updated only if they are newer on the source.
       • Older versions of updated files will be archived.
       • CCC will not prune archive content.</string>
        <key>StandardErrorPath</key>
        <string>/Library/Logs/CCC.log</string>
       ...and 229 more line(s)
    Contents of /Library/LaunchDaemons/com.bombich.ccc.scheduledtask.UUID.plist (checksum 1637450734)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Disabled</key>
        <true/>
        <key>Label</key>
        <string>com.bombich.ccc.scheduledtask.UUID</string>
        <key>OnDemand</key>
        <false/>
        <key>ProgramArguments</key>
        <array>
        <string>/Users/USER/Downloads/Carbon Copy Cloner.app/Contents/MacOS/ccchelper.app/Contents/MacOS/ccchelper</string>
        <string>UUID</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        <key>ServiceDescription</key>
        <string>CCC will copy the selected items from "Pictures" to "Pictures Backup". If you have backed up to this destination in the past, only items that have been modified since the last backup task will be copied.
       • Files and folders unique to the destination will be left alone.
       • Files on the destination will be updated only if they are newer on the source.
       • Older versions of updated files will be archived.
       • CCC will not prune archive content.</string>
        <key>StandardErrorPath</key>
        <string>/Library/Logs/CCC.log</string>
       ...and 207 more line(s)
    Contents of /Library/LaunchDaemons/com.bombich.ccc.scheduledtask.UUID.plist (checksum 1138618051)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Disabled</key>
        <true/>
        <key>Label</key>
        <string>com.bombich.ccc.scheduledtask.UUID</string>
        <key>OnDemand</key>
        <false/>
        <key>ProgramArguments</key>
        <array>
        <string>/Users/USER/Downloads/Carbon Copy Cloner.app/Contents/MacOS/ccchelper.app/Contents/MacOS/ccchelper</string>
        <string>UUID</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        <key>ServiceDescription</key>
        <string>CCC will copy the selected items from "Aperture Library" to "Aperture Library Backup". If you have backed up to this destination in the past, only items that have been modified since the last backup task will be copied.
       • Files and folders unique to the destination will be left alone.
       • Files on the destination will be updated only if they are newer on the source.
       • Older versions of updated files will be archived.
       • CCC will not prune archive content.</string>
        <key>StandardErrorPath</key>
        <string>/Library/Logs/CCC.log</string>
       ...and 233 more line(s)
    Contents of /Library/LaunchDaemons/com.bombich.ccc.scheduledtask.UUID.plist (checksum 3444763627)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Disabled</key>
        <true/>
        <key>Label</key>
        <string>com.bombich.ccc.scheduledtask.UUID</string>
        <key>OnDemand</key>
        <false/>
        <key>ProgramArguments</key>
        <array>
        <string>/Users/USER/Downloads/Carbon Copy Cloner.app/Contents/MacOS/ccchelper.app/Contents/MacOS/ccchelper</string>
        <string>UUID</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        <key>ServiceDescription</key>
        <string>CCC will copy the selected items from "MacHD" to "iMac27 Desktop Clone". If you have backed up to this destination in the past, only items that have been modified since the last backup task will be copied.
       • Files and folders unique to the destination will be permanently deleted.
       • Files on the destination will be updated if the size or modification date differs.
       • Older versions of updated files will not be archived.
       </string>
        <key>StandardErrorPath</key>
        <string>/Library/Logs/CCC.log</string>
       ...and 209 more line(s)
    Contents of /Library/LaunchDaemons/com.bombich.ccchelper.plist (checksum 495358405)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Label</key>
        <string>com.bombich.ccchelper</string>
        <key>MachServices</key>
        <dict>
        <key>com.bombich.ccchelper</key>
        <true/>
        </dict>
        <key>Program</key>
        <string>/Library/PrivilegedHelperTools/com.bombich.ccchelper</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/PrivilegedHelperTools/com.bombich.ccchelper</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
       </dict>
       </plist>
    Contents of /Library/LaunchDaemons/com.carbonite.launchd.carbonitedaemon.plist (checksum 2948711974)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Label</key>
        <string>com.carbonite.daemon</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/Application Support/Carbonite/CarboniteDaemon.app/Contents/MacOS/CarboniteDaemon</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        <key>OnDemand</key>
        <false/>
        <key>WorkingDirectory</key>
        <string>/Library/Application Support/Carbonite</string>
        <key>StandardOutPath</key>
        <string>/Library/Logs/Carbonite1.log</string>
        <key>StandardErrorPath</key>
        <string>/Library/Logs/Carbonite2.log</string>
       </dict>
       </plist>
    Contents of /Library/LaunchDaemons/com.teamviewer.teamviewer_service.plist (checksum 13465011)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Debug</key>
        <true/>
        <key>Disabled</key>
        <true/>
        <key>Label</key>
        <string>com.teamviewer.service</string>
        <key>OnDemand</key>
        <false/>
        <key>ProgramArguments</key>
        <array>
        <string>/Applications/TeamViewer 8/TeamViewer.app/Contents/Resources/TeamViewer_Service</string>
        <string>-Module</string>
        <string>Full</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        <key>WorkingDirectory</key>
        <string>/Applications/TeamViewer 8/TeamViewer.app/Contents/Resources</string>
       </dict>
       </plist>
    Contents of Library/LaunchAgents/com.adobe.ARM.UUID.plist (checksum 578238223)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Label</key>
        <string>com.adobe.ARM.UUID</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Applications/Adobe Acrobat Pro.app/Contents/MacOS/Updater/Adobe Acrobat Updater Helper.app/Contents/MacOS/Adobe Acrobat Updater Helper</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        <key>StartInterval</key>
        <integer>12600</integer>
       </dict>
       </plist>
    Contents of Library/LaunchAgents/com.adobe.ARM.UUID.plist (checksum 926752576)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Label</key>
        <string>com.adobe.ARM.UUID</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Applications/Adobe Acrobat X Pro/Adobe Acrobat Pro.app/Contents/MacOS/Updater/Adobe Acrobat Updater Helper.app/Contents/MacOS/Adobe Acrobat Updater Helper</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        <key>StartInterval</key>
        <integer>12600</integer>
       </dict>
       </plist>
    Contents of Library/LaunchAgents/com.bombich.ccc-user-agent.plist (checksum 1605626007)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Disabled</key>
        <false/>
        <key>KeepAlive</key>
        <true/>
        <key>Label</key>
        <string>com.bombich.ccc-user-agent</string>
        <key>Program</key>
        <string>/Users/USER/Downloads/Carbon Copy Cloner.app/Contents/MacOS/CCC User Agent.app/Contents/MacOS/CCC User Agent</string>
        <key>StandardErrorPath</key>
        <string>/Users/USER/Library/Logs/CCC.log</string>
        <key>StandardOutPath</key>
        <string>/Users/USER/Library/Logs/CCC.log</string>
       </dict>
       </plist>
    Contents of Library/LaunchAgents/com.google.Chrome.framework.plist (checksum 2813695882)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>KeepAlive</key>
        <dict>
        <key>SuccessfulExit</key>
        <false/>
        </dict>
        <key>Label</key>
        <string>com.google.Chrome.framework.service_process/Users/USER/Library/Applicat ion_Support/Google/Chrome</string>
        <key>LimitLoadToSessionType</key>
        <string>Aqua</string>
        <key>Program</key>
        <string>/Applications/Google Chrome.app/Contents/Versions/25.0.1364.152/Google Chrome Helper.app/Contents/MacOS/Google Chrome Helper</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Applications/Google Chrome.app/Contents/Versions/25.0.1364.152/Google Chrome Helper.app/Contents/MacOS/Google Chrome Helper</string>
        <string>--type=service</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        <key>Sockets</key>
        <dict>
        <key>ServiceProcessSocket</key>
       ...and 7 more line(s)
    Contents of Library/LaunchAgents/com.google.keystone.agent.plist (checksum 4195197102)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Label</key>
        <string>com.google.keystone.user.agent</string>
        <key>LimitLoadToSessionType</key>
        <string>Aqua</string>
        <key>ProgramArguments</key>
        <array>
         <string>/Users/USER/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bu ndle/Contents/Resources/GoogleSoftwareUpdateAgent.app/Contents/MacOS/GoogleSoftw areUpdateAgent</string>
         <string>-runMode</string>
         <string>ifneeded</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        <key>StartInterval</key>
        <integer>3523</integer>
        <key>StandardErrorPath</key>
        <string>/dev/null</string>
        <key>StandardOutPath</key>
        <string>/dev/null</string>
       </dict>
       </plist>
    Contents of Library/LaunchAgents/com.leadertech.PowerRegister.SEA1.UUID.plist (checksum 2799483814)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Label</key>
        <string>com.leadertech.PowerRegister.SEA1.UUID</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Applications/Seagate Dashboard.app/Contents/Resources/Seagate.app/Contents/Resources/SeagateRegRemin der.app/Contents/MacOS/SeagateRegReminder</string>
        </array>
        <key>StartInterval</key>
        <integer>3600</integer>
       </dict>
       </plist>
    Contents of Library/LaunchAgents/com.seagate.dashboard.plist (checksum 1981328959)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Label</key>
        <string>com.seagate.dashboard</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Applications/Seagate Dashboard.app/Contents/MacOS/Seagate Dashboard</string>
        <string>-runMode</string>
        <string>autoLaunched</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
       </dict>
       </plist>
    Contents of Library/LaunchAgents/org.virtualbox.vboxwebsrv.plist (checksum 3654809970)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
         <key>Disabled</key>
         <true/>
         <key>KeepAlive</key>
         <false/>
         <key>Label</key>
         <string>org.virtualbox.vboxwebsvc</string>
         <key>Program</key>
         <string>/Applications/VirtualBox.app/Contents/MacOS/vboxwebsrv</string>
         <key>Sockets</key>
           <dict>
           <key>Listeners</key>
           <dict>
             <key>SockServiceName</key>
             <string>18083</string>
             <key>SockType</key>
             <string>stream</string>
             <key>SockFamily</key>
             <string>IPv4</string>
           </dict>
         </dict>
       </dict>
       ...and 1 more line(s)
    Global login items
       /Applications/HP LaserJet Software/HP Setup Assistant.app
       /Library/Application Support/hp/laserjet/Trap Monitor/HPEventHandler.app
    Firewall: On
    DNS: 216.40.77.126
    Listeners
       cupsd: ipp
       kdc: kerberos
       launchd: afpovertcp
       launchd: microsoft-ds
    User login items
       iTunesHelper
       - /Applications/iTunes.app/Contents/MacOS/iTunesHelper.app
       VMware Fusion Start Menu
       - /Applications/VMware Fusion.app/Contents/Library/VMware Fusion Start Menu.app
       Google Drive
       - /Applications/Google Drive.app
       Canon IJ Network Scanner Selector2
       - /Library/Printers/Canon/IJScanner/Utilities/Canon IJ Network Scanner Selector2.app
       Android File Transfer Agent
       - /Users/USER/Library/Application Support/Google/Android File Transfer/Android File Transfer Agent.app
       AdobeResourceSynchronizer
       - /Applications/Adobe Acrobat X Pro/Adobe Acrobat Pro.app/Contents/Support/AdobeResourceSynchronizer.app
       Eye-Fi Helper
       - /Applications/Eye-Fi/Eye-Fi Helper.app
       Google Chrome
       - /Applications/Google Chrome.app
       Launch Nikon Message Center 2
       - /Applications/Nikon Software/Nikon Message Center 2/Nikon Message Center 2.app/Contents/SharedSupport/Launch Nikon Message Center 2.app
    Safari extensions
       Dashlane
    Restricted files: 513
    Lockfiles: 4
    High file counts
       Desktop: 125
    Elapsed time (s): 584

Maybe you are looking for

  • [CS3 JS] XML markup with a loop

    Hello, I'm creating a script that outputs a calendar list for a month into a textframe in Indesign. I would like to have each line (representing a day) marked up with a tag (monday to tag "monday"). I'm using the function below, but i is not creating

  • Obsolete IPad

    Has anyone else brought any apple product and now found them to be obsolete. I have been trying to update apps on my iPad for sometime now, every time I do it says for me to update my iPad which I can't as it won't let me update past 5.1.1. I rang ap

  • Need help in fetching data based on date

    i want to  write the query for the below statements ? 1) net_bank_cr from rm_memorandum for the previous year end 31st March 2) net_bank_cr from rm_memorandum for the as on date 3) net_bank_cr from rm_memorandum as one year prior to current reporting

  • Process Chain Step by Step

    Hi to all, Please can any one tell me, how to designe Process Chain Step by Step. Or any Document Related to that. i shall be thankful to you for this. Regards Pavneet Rana

  • Transporting users from BW system

    Hi all        Is there a way to transport users existing in BW3.5 system to another BW system,if yes can somebody give the steps.Please help. Thanks.