Internet speed cuts in half when running a rule thru the router

Can someone explain to me how it is that I can go from a 80+Mbps upload and 39+Mbps download when I have no rules running via my router, to a 34-38.94Mbps upload and a 37Mbps download speed? I observe the warning of the router that it will utilize some resources, but if it is going to chop my upload speed in half, why even offer it as an option?
Thanks

Hi, we've seen that happen when someone configures parental control through the router. It's a known issue that never made the cut when it came to firmware updates. Not sure if it's just a super low use feature and it took backseat to other features and upgrades or of someone didn't want to compete with the Verizon/McAfee family protection software.
If that's the rule your talking about then I would suggest simply using open dns. It's free and more full featured

Similar Messages

RAM cut in half when running bootcamp

I just installed Windows Vista on Bootcamp and noticed that my Ram is at 2 GB when I'm running vista. The Macbook Pro 15inch 2.54 ghz came with 4 Gigs of RAM. Does anyone know why it reduces my RAM to 2 GB when I use bootcamp for Vista? Thank you.

Did you install the 32-bit or 64-bit version of Vista? You can check by opening the Start Menu and typing "System" and choosing the options that appears (if that doesn't work go Control Panel>System).
32-bit operating systems cannot use full 4GB of RAM although it should be capping out at around 3.25, not 2GB.

I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

at the end, you say "import preferences", which program are you describing?
So im safer using footage that is remotely being pulled from iphoto...
vs
using footage that is imported into FCP from imovie?
Is there anything i can do in fcp to make this footage more reliable or safer or more stable as i pull remotely from iphoto?
All the footage, and all the libraries to all programs, or on a new pegasus 12tb raid 5 setup fyi.

TS3274 I get on the internet with my Ipad3 and when I start typing in the search box the ipad guess' what I want before I finish typing and goes to the internet. How do I fix that?

I get on the internet with my Ipad2 and when I start typing in the search box the ipad guess' what I want before I finish typing and goes to the internet. How do I fix that?

Yes if you purchase the tethering data plan for your iPhone. See:
iPhone: System requirements for Personal Hotspot

How Can I Regulate Internet Speed Thru The Router

I have a E3000 router and I want to slow the upload and download speed to my Xbox is there any way to do this thru the router settings. I have internet that is about 20-30mbps down and 2-3mbps up I want to slow it to about 5-6mbps down and 1-2 mbps up.

You can set the priority level of your Xbox. Here are the steps:
Open the web interface,
Go the Applications and Gaming> QoS
Enable Internet Access Priority, under Category select Ethernet(for wired) or MAC add (if it's wireless)
Set your preferred priority level.
Setting up QoS on a Linksys Wireless-N router

RV042 - I have customer who upgraded to 20 meg cable internet service and can only get 10 meg thru the router.

RV042 - I have customer who upgraded to 20 meg cable internet service and can only get 10 meg thru the router. The customer had upgrade to a 20 meg cable internet service from a 10 meg service. The customer is only able to get the 20 meg service going from cable modem to PC. If he goes thru the RV042 router, he is only getting up to 10.7 down and 1.37 up. Additional steps taken….He had a Linksys SRW224P switch connected to the RV042 router and we had disconnected this switch for testing purposes. We performed the speed test again and we get the same speed results so we know the switch is not the issue.He had upgraded to firmware version 1.3.12.19 – TM Feb 13, 2009 – tested speed and no change.We accessed the web management interface and tried several modifications. This includes the following…..- We disabled the firewall – no change- We disabled SPI with is the Stateful Packet Inspection (I was thinking this one would do it) – no change in speed.- We disabled DoS (Deny of Service) – no change.- We set MTU to Manual and tested various byte increments based on MTU ping testing. – Once again, no change in speed. He is NOT using Load balancing on the routerHe has NO access rules but does have a few port forwards. Finally, with each change, he is saving the changes on the router.

You are expecting 20MB throughput on a $150 router? Well, ok, maybe.. Can you check on your router or switch if the port is set or auto negotiated to 10 or 100? That could explain 10MB limit (although technically a 10Mb port is considered 20Mb theoretical max throughput as 100Mb port is considered 200Mb per Cisco). So maybe you ended up with 10/half somehow? MTU 1500 would also be good for that connection I think and to try to get max throughput.

Running Business rules thru MAXL(or CmdLnLauncher.bat utility)

I want to run the Business rule. Daily 3 times(Like automation) in 11.1.1.3 version
Refering to the forums
Running Business rules thru MAxl
.RTP file format
i found its not possible through Maxl.
But I was not able to understand clearly how to do the process atleast through "CmdLnLauncher"
Where can i Find the utility Folder
and Where and how do i need to write the script to run Business Rule(I also wanted to use the Runtime Prompt)
Note : i went to EAS --> Right click on BR--> Automatice BR --> Saved the File in desktop with .xml file

The utility will be on a machine where EAS has been installed, it will be located at <HYPERION_HOME>\products\essbase\eas\console\bin
The post you linked to .RTP file format has all the details on running it.
Cheers
John
http://john-goodwin.blogspot.com/

I can not get the iPad to connect to the internet thru the router it shows the modum but will not connect

I can not get the iPad to connect to the internet thru the router it shows the modum but will not connect it keeps saying choose a netwokand the IP Address it automaticaly puts in is wrong?

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Additional things to try.
Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
On your iPad go to Settings > General > Reset > Reset network settings and see if that enables you to connect.
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
 Cheers, Tom

Internet Speed slowed to 56k when i get home from work.

From 6pm pacific to 11 pm every night my internet is very erratic. going from 0-1mbps. When i use the tech support they always accelerate the issue and tell me i will get a call from someone else. Everytime i tell the tech support they have to call me after 6pm pacific time. The tech say ok they will call me after 6pm. I then about a week later have always gotten a call back at 3 pm during my work hours. Then they tell me there is nothing wrong with my internet its looking fine. I cant talk to them because im at work and tell them to call me back after 6. They usually say ok and i dont get a call back. WHen the tech support do there scripted testing it always shows im getting the right amount of speed but im still getting a download speed thats compatible to 56k.

Sorry to hear about the speed troubles. So we can get more information from you, I have copied your post to our private support board. Please refer all correspondences to there from here on out. You can easily get to the private support one of two ways. In the email you signed up for the forums with, you will receive a link to click on. Make sure you are already signed into the forums before clicking on this link. Another way of getting there is by clicking on your username anywhere you see it in the forums. This brings you to your account profile. Scroll down to the section labeled "My Support Cases" . In there you will see the link to your case.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

Bluetooth Problems when running other programes in the background

I have been experiening problems with the bluthooth conenctivity on my 2012 Macbook Air.
It is the 2.0GHZ i7 8GB RAm with 256Gb flash storage model released June 2012.
I use it in clamsehll mode hoked up to an external HD monitor using the Mini display port to HDMI adaptor and then link it to an external LG soundbar using bluetooht for audio.
No other device has any issue linking ot the LG soundbar but when i am using my Macbook air and downloading something, even a tiny file that might only be goign at a speed of a few kb/s ( I have very slow internet speed ) it casues the bluetooth to cut out every 5-10 seconds and then some times it will work for an hour uninterupted.
The only other bluthooth device I have connected is my Magic Trackpad and I have tried it without this with the same results occuring.
Has anyone else experienced this and if so has nayone found a soltuion so that i can run a basic video file and hear the sound clearly and uninteruopted while using my Macbook to to run some other vey basic tasks in the background?
Any help is greatly appreciated.

I believe the process to do this is to:
1) Go to transaction SM36 to create a batch job.
2) Enter a job name
3) Select "Step", specify the ABAP program name (for ME2M, this is RM06EM00), then type in the variant you wish to use
4) Save, then go to Start Condition and specify when you want this batch job to run, along with the frequency
Edit - nevermind, I misunderstood the issue. I am unsure of how to have the layout automatically populated.
Edited by: Andy Slania on Jan 26, 2011 10:28 PM

Issue with date formula when running a report on the 1st day of the month

We have a formula that compares last month data against last year last month, the report runs on the 1st of every month although the report errors when it tries to run in January being the first month of the new year it tries to look for a month begining with Zero instead of looking back at decemeber which would be 12.
Does anyone any solutions for this issue?
Thanks,
Chris
Example of some formula's we have tried but none seem to work.
if {@MonthName} = "December" then year({CDCCHD.CDOPDT}) in year(currentdate)-1 to year(currentdate)-2 else year({CDCCHD.CDOPDT}) in year(currentdate)
OR
(if {@Last Full Month Name}= "December" then year({CDCCHD.CDOPDT})= year(currentdate)-2 or
{CDCCHD.CDOPDT} in lastyearytd else {CDCCHD.CDOPDT} in lastyearytd or
{CDCCHD.CDOPDT} in yeartodate)
OR
({CDCCHD.CDOPDT} in dateserial(year(currentdate)-1,month(currentdate),01)-1 to dateserial(year(currentdate)-1,month(currentdate)-1,01) or
{CDCCHD.CDOPDT} in lastfullmonth)
OR
if {@monthname} = "December" then {CDCCHD.CDOPDT} in dateadd("m", -28, (currentdate)) to (currentdate)-14 else {CDCCHD.CDOPDT} in dateadd("m", -14, (currentdate)) to (currentdate)

Chris,
Give these formulas a try...
Beg of Last Month
DateAdd("m", DateDiff("m",#1/1/1900#, CurrentDate) - 1, #1/1/1900#)
End of Last Month
DateAdd("m", DateDiff("m",#1/1/1900#, CurrentDate), #1/1/1900#)
Beg December of Last Year
IF DatePart("m",CurrentDate) = 1
THEN DateSerial(DatePart("yyyy",CurrentDate) -2, 12,1)
ELSE DateSerial(DatePart("yyyy",CurrentDate) -1, 12,1)
End December of Last Year
IF DatePart("m",CurrentDate) = 1
THEN DateSerial(DatePart("yyyy",CurrentDate) -1, 1,1)
ELSE DateSerial(DatePart("yyyy",CurrentDate), 1,1)
Note that the "End" formulas produce a value that shows midnight of the following day that you would normally expect to see... For example, if you are expecting to see 12/31/2009, it will show 1-1-2010.
The reason is that the formulas come out to be midnight of the day shown... So a range of 12/1/2009 - 1/1/2010 will include 12/31/2009's data but none of 1/1/2010... (12/1/2009 - 12/31/2009 would actually cut off 12/31/2009).
If for some reason your data is stored w/o time values then an adjustment would need to be mande.
HTH,
Jason

Error connecting to Essbase Server when running business rules

We recently migrated from v9.3 to v11.1.1.3. I have two users with Administrative access who need to run business rules on a native Essbase application, but cannot. They get the message 'Error connecting to Essbase Server'. They get this message when trying to set this execution database. They can't even expand the server to see the list of applications. I have tried deprovisioning them in Shared Services, refreshing security, then adding it all back in and refreshing again, but it doesn't work. My own id has identical access to that which I'm granting them, and I have no problems. I even created a native user with the same access and it works as well. No matter what I do, I cannot get these two users to be able to run their business rules in EAS.
We also have a Planning application, and the Planning Administrative user has the same issue. However, this user is able to get around it by running rules using the Planning connection rather than the Essbase connection. She has the same issue of not seeing anything under the Essbase Servers when trying to set the execution database though.
In version 9, we were not using Shared Services for Essbase security. Unfortunately our consultant chose to set it up using Shared Services security when migrating, and according to the documentation, one cannot go back to using Native Essbase security.
I also tried running the Externalize Users wizard and the three users with issues failed to externalize. My own id did, and the native user I created succeeded.
Has anyone experienced an issue like this or have any ideas on how to resolve?
Thanks,
Sabrina

Follow up - Oracle has finally resolved this. It's so simple, yet no one thought to check until now. The three users with problems all have mixed case user id's in ldap. They have always logged into EAS with all lower case ids. In version 9, on native security, this was never a problem. But in version 11 using Shared Services (not sure which factor changed it), it doesn't work. The simple solution is to log in with their exact mixed case user ids. It only took Oracle three months and the creation of a bug issue to figure this out for us.
Sabrina

My internet keeps going down and when I try to renew the DHCP lease it stops working altogether

Every couple of weeks my internet would go down, I would be surfing the web and suddenly my connection would fail. I would try renewing my DHCP lease and every time I did I would get an IPv4 address of 192.168.0.100. Originally, restarting the router would fix the problem but the past couple of times they needed a technician from the provider to fix it. Even using the Ethernet cable doesn't work either.
is there a reason why this keeps happening and how do I stop it from happening again? Is there anything I can try to fix it on my end?
my computer is a five year old MacBook, running OS X 10.9.4

Having the same problem. Watched 25 minutes of a rental and it stopped with the message"unable to load video"
Using current version IPad mini.
Ios7 is HUGH PIECE OF CRAP!!!!

Network Error []: Cannot Get Host Name when running business rules

Guru's
We are getting the following error intermittently when we are running business rules (Planning Application >>Tools>>Business Rules) or running SmartView refreshes:
Network error []: Cannot Get Host Name
The following is then logged in the Essbase Application logs:
Local/Application/Database/admin@Native Directory/Error(1042022)
Network error []: Cannot Get Host Name.
A quick look at the Essbase Error Messages Doc says it is a network error and we have to consult the network documentation. Unfortunately this is not very descriptive so we logged an SR with Oracle but we don't seem to be getting a resolution.
The environment is 11.1.2.0 and the architecture is as follows:
Server 1 - MS Server 2008 x64:
Planning, Calc Manager, Foundation Services, Framework Web Services, EAS, APS, Web Analysis, FR Web Services
Server 2 - MS Server 2008 x64:
Essbase Server
Server 3 - MS Server 2008 x64:
Framework Services, FR Print Services
We have tried doing the following:
1. Put in the server host names into the hosts file on the Hyperion Servers
2. Applied the following TCP/IP settings on all the Hyperion Servers and one of the user machines as a test:
      - Added a new DWORD Value named TcpTimedWaitDelay and set it to 30.
     - Added a new DWORD Value named MaxUserPort and set it to 65534.
     - Added a new DWORD Value named MaxFreeTcbs and set it to 6250
3. Confirmed that there are no packet drops by monitoring the server NICs so no packet loss could be the cause of this issue
4. The Essbase Config file has the following settings:
NETDELAY 2000
NETRETRYCOUNT 2500
Has anyone come across this issue and if you managed to resolve it, how did you go about it.
Thanx

Hi Rahul
The issue is happening to a number of calcs so it it not one calc specifically. I will ask the functional consultants to enhance the logging in the business rules so that we can see if the issue happens on a specific member\block etc and yes we do use Xrefs
We can run this as a calc in EAS without any issues and it's intermittent because this business rule runs 95% of the time in Planning Application >> Tools >>Business Rules without any issues.
Thanks

Opening Balances changes when running business rules

Good morning,
We are experiencing problems with the opening balance calculation (Flow: F100) when running the consolidation business rules in BPC 10.1.
For example, in 2013.12, Entity 1111 and Account C_ENL_DIV, the ending balance (Flow: F900) is 180.000 euros. When we run the copy opening balance package, the opening balance (F100) for 12.2014 is 180.000 euros, what which is correct.
The problem comes when some consolidation rules are executed, for example, AU_DIVCTA. For the previous case, we can see that the opening balance changes, previously it was 180.000 euros, coinciding with the final balance of 12.2013 and now the cell is empty, what which is incorrect. This occurs for more than one business rule.
The definition for the AU_DIVCTA business rule, is the next one. You can see that this do not affect to the opening balance in any case.
We attached an Excel where you can see this and much more similar cases the definition for the business rule AU_DIVCTA:

Hi,
Looks like the substitution variables its looking for are missing.
Can you check that?
Regards,
Amol

Internet speed cuts in half when running a rule thru the router

Similar Messages

Maybe you are looking for