Internet stopped working via airport express

Up till 2 nights ago everything was working great, Now I've lost my internet thru my airport.
I've done a direct connect and that is working great. I've also used a secondary wireless network(not Mine) that gets 40% signal strength and that seems to work fine. I have tried two different Airport Express units both send out full signals and run my printer fine. The diagnostic tool is showing red(fail) on the internet and server.
I'm afraid clicking too buttons for fear of really messing things up.
Please help
Dennis

Hello dcsj. Welcome to the Apple Discussions!
It sounds like the "communication" between your DSL/cable modem and the AirPort Express Base Station (AX) has become "lost."
Try the following, in order, until resolved:
1. If the modem has a reset switch, use it to reset the modem. Wait at least 5-10 minutes for the modem to initialize.
2. Remove power from the modem. If it has a backup battery, remove this as well. Wait 5-10 minutes. Replace the battery, and add power back to the modem.
3. Perform a complete power recycle of your network components as follows:
Modem/Router Power Recycling - Quick
o Power-off the modem, AX, & computer(s); Wait at least 5 minutes.
o Power-on the modem; Wait at least 5 minutes.
o Power-on the AX; Wait at least 5 minutes.
o Power-on the computer(s)
If this fails to get the modem to "recognize" the Internet router, then try the "Full" version.
Modem/Router Power ReCycling - Full
o Power-off the modem, AX, & computer(s). (Wait at least 30 minutes. If possible, leave the modem off overnight.)
o Power-on the modem; Wait at least 15 minutes.
o Power-on the AX; Wait at least 5 minutes.
o Power-on the computer(s)
4. Contact your ISP to have them perform a "modem reset."

Similar Messages

Mail stopped working on Airport Express wifi.

Using Airport Express. Suddenly, only Mail stopped working on my iPad & iPhone, using my home Airport Express. Other internet site work. Mail works on different wifi network. I deleted Yahoo Account in iPad Settings. Re-entering the Yahoo Account gives the msg "IMAP server 'apple.imap.yahoo.com' is not respondig. Check network connection ant that you entered correct info in 'Incoming Mail Server' field.

Had the very same problem with ATT DSL and mail @ my domain. Tried everything including pestering the crap out of my hosting service. Turned out to be AirPort Extreme firmware version 7.6.4 (the latest). I downgraded with Airport Utility to 7.6.3 and all is fine.

Internet Connection Not via Airport Express

I have a iMac connected to the internet via a DSL modem upstairs and an airport express downstairs connected to the stereo with the ethernet port turned off. It works fine for itunes. The airport express is configured as a base station and is using the 10.0.1. subnet. When I use an ibook to connect to the wireless network, I can see the iMac and transfer files, mount locations etc. fine, but I cannot get to the internet from the ibook. How do I configure the base station so that the ibook can get to the internet via the iMac, which uses a different IP assigned by the ISP.?

I have a iMac connected to the internet via a DSL
modem upstairs
I assume an ethernet cable from modem to iMac, right?
and an airport express downstairs
connected wirelessly to the iMac on the different network created by the Express, right?
How do I configure the
base station so that the ibook can get to the
internet via the iMac, which uses a different IP
assigned by the ISP.?
The Internet IP can be shared from iMac's ethernet to it's Airport via System Preferences/Sharing/Internet. Then the Express would need to connect to the iMac as a client which would continue to work for AirTunes but since the iMac sharing can't be a WDS Main Station the iBook wouldn't work.
The best strategy is to connect the DSL modem to the Express and then connect both the iMac and iBook wirelessly. That probably re-arranges where your stereo gets AirTunes so buy another Express or better yet an Extreme Base Station!

Imac internet not working with airport express

Hi there,
I purchased an imac for my upstairs bedroom, but the signal from the time capsule was weak, so I bought an airport express and set it up. But still I cannot connect to internet even though after running the network diagnostics say I am connected to internet. My macbook works perfectly in the bedroom with all airport bars working, but the imac still has only two bars. I've tried everything, help!!

Same issue you have except I never connected the printer directly to my Mac via the USB. Went straight to the wireless Airport Base Station and connected the printer. Printer is found in "Printer Setup Utility" and connected via "Bonjour", unsure what that is. However the *"Printer Setup Utility"* is asking me to select: *"Print Using"* and giving choices such as CANON BJC-1000 - GIMP-PRINT v5.0.0 beta2. I am unsure what to select. And the printer still doesn't print even with one of these 20 choices selected. Any ideas from anyone?

HP 1200 Laserjet is no longer working via Airport express &MacBook pro

Connection has been working just fine for 2 years and suddenly It gives me just one line of little symbols when trying to print. If I connect printer directly via USB works fine. I have made no changes that can explain what happened.What I have done already: restart everything, computer, the printer and also the Airport express connection. I downloaded the latest driver version as well.
When checking via printer utilities the connection it says there are problems connecting the printer and the server.
Any lights on this?
Thanks!

I just got my airport express tonight and had the same problem with my HP 1200 all in one deskjet. After a couple hours of searching and installing the gimpdrivers that did not work I ran across another post that linked me to: http://www.linuxfoundation.org/en/OpenPrinting/MacOSX/hpijs
It worked!
Install all 3 dmg files
gplgs-8.64so-ub.dmg
Foomatic-RIP 4.0.1
hpijs-3.9.2-ub.dmg
Install in that order. They won't install unless you do. One of them does say it is for 10.3 or newer but that did not effect me on 10.4.
Once installed, Add a new printer (delete old ones) then select HP from drop down and scroll and select : HP PSC foomatic/hpijs.
After that you should be go to go.

HT1515 How to setup laptop use both 3G internet and audio via Airport Express

Laptop connected to internet via 3G mobile phone network, but when connected simultaneously an Airport Express to stream audio, the laptop can not connect to internet as it try to connect internet through Airport Express. So how to setup to use both.

Thanks jakeloveslucy.
I tried to setup the network by using Airport Utility, the problem is Airport Utility can not find Airport Express while I can use Airport Express to stream music very well. Can you suggest to fix this.
I use windows 7 64 bit sp1 ; Airport Utility 5.6.1.
[img]http://no4.upanh.com/b2.s29.d3/cc356ba2635bf1f46b71912fa1e6ce43_46991874.2012070 8133759.jpg[/img]
[img]http://no6.upanh.com/b4.s29.d4/a0f5f05c0f2ec0f5e94b40bc7c8e2986_46991876.2012070 8135000.jpg[/img]

When playing my i-tunes library through my hi-fi via Airport Express, how can I get i-tunes to play a single album and then stop, without continuing on through my entire library. It's a problem that doesn't occur when I'm listening through my i-pod.

When playing my i-tunes library through my hi-fi via Airport Express, how can I get i-Tunes to play a single album and then stop, without continuing on through my entire library? It's a problem that doesn't occur when listening on my i-pod.

Hey everyone in Apple world!
I figured out how to fix the flashing yellow screen problem that I've been having on my MBP! Yessssss!!!
I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
I followed the instructions on this page and here's what I did:
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process. Since I did that, my MBP boots up just like normal. No flashing yellow screen anymore!!
(Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
Let me know if this works for you!
Elaine

I am having trouble connecting to wifi network via airport express on my windows xp pc, but I know it is working because I can connect on my macbook, does anyone know what the problem is?

I am having trouble connecting to wifi network via airport express on my windows xp pc, but I know it is working because I can connect on my macbook, does anyone know what the problem is?

Tell us more about the problem, I can think up 100&1 different reasons, but don't have time to go through all the possibilities. So.. what happens?

Internet speed slows down when connected via airport express

Internet speed slows down when connecting via airport express. When connecting directly via the timecapsulethe internet speed is ok, when connecting via the airport express the speed slows down.What can I do to change that? Any suggestions?

Turn off the AirPort Express completely as a test, and move your computer very close to the location of the Express.
As I said before, the Express can only extend the bandwidth (speed) that it receives from the Time Capsule, so the speed that you see there with the Express powered off will be the fastest speed of which the Express is capable.
The Express will make the signal go further when it extends....but it will not make the signal go faster.
A good location for a device that extends wirelessly is a point that is about half the distance from the Time Capsule and the general area that needs more wireless coverage.
If you locate the AirPort Express too far from the Time Capsule or there are more than a couple of walls in the signal path, the signal will be very slow by the time that it reaches the Express....and the Express simply extends a signal that has already slowed down significantly.
If you already have the Express located about half the distance between the Time Capsule and general area that needs more wireless coverage, how many walls, ceilings or other obstructions are there in the signal path between the Time Capsule, the AirPort Express and the area that needs more coverage?
Often, due to obstructions, it is just not possible to achieve good performance when you try to extend a network wirelessly. The solution is connect the AirPort Express to the Time Capsule using a wired Ethernet connection.
There is virtually no signal loss with this type of connection, so the Express can be located exactly where it is needed and it will produce a much faster wireless signal in this type of setup.

Best way to extend wireless via airport express and time capsule

best way to extend wireless via airport express and time capsule
i live in a two storey house where i use my airport express to create a wireless network in the main floor, and time capsule to extend it in the upper floor, where my room is. i have like 16 mbps in the main floor, and 2-3 mbps in the upper floor after having speediest.
i used time capsule in the upper floor because i use wireless backup daily and don't want to put internet down while i im doin it and consequently my parent can have internet access in the main floor, am i right? or do i have make just the opposite in order to have a good internet speed?
secondly, while checking airport express wireless mode on airport utility, there is like 4 different type of radio mode(802 11n bg comp, 802 11n 2.4, 802 11n a comp, 802 11n 5ghz) which i have no idea what they mean
what do you recommend?
we have like iphone4, iphone 3g, mbookpro, ipad, ipad 2, samsung tv and a sony vaio laptop in the wireless network
thank you

What you have would appear to be working but I can comment how I would redefine your setup. Note that both Airport Express and Time Capsule can function as wireless base stations so you do have wireless everywhere and at all times — using the Time Capsules for backups doesn’t mean your parents won’t have internet access regardless of the where the base stations are located.
You appear to have devices to connect to your network that use the 2.4 GHz band with 802.11g such as the iPhone 3G and perhaps the 5 GHz band with 802.11n such as likely the Macbook Pro if it’s a recent model. The iPhone 4 can use 5 GHz and 802.11n. Can’t comment on the Sony and Samsung but you can check their specs.
Now the Time Capsule (if it’s a recent version), can simultaneously supply 2.4 GHz and 5 GHz band signals, but the Airport Express (if it’s recent) can only use one of those bands at one time. Likely the lowest common denominator for your devices is going to be the 2.4 GHz band since the devices that are capable of using 5 GHZ also support 2.4 GHz. If you don’t use 5 GHz, you won’t lose much in a two-storey home because likely it’s the 2.4 GHz band is better signal anyway because 5 GHz signals drop off quickly with several walls/floors to penetrate.
You also didn’t mention if the Airport Express is used to support a printer and/or AirPlay (using iTunes to play on remote speakers via the Airport Express connection) but that might also be a factor in the best location to place the Airport Express. Although the printer could be switched between the Time Capsule and the Airport Express if needed, only the Airport Express will support your remote speakers.
Recommend you use the Time Capsule as the Base station. When using Airport Utility to define the network, after you name your network, etc., select the Wireless tab, check the box “Allow this network to be extended” and set the Radio Mode to "802.11n (802.11b/g compatible)”.
Using the Airport Utility, click on the Airport Express; after you define the device and network name, select the Wireless tab, define the Wireless Mode as “Extend a Wireless Network” and check the box “Allow wireless clients”.
Hope that helps.

Wireless Speakers via Airport Express

I have two sets of powered speakers which I play my music from iTunes via Airport Express units. My issue is after months of excellent sound and no problems, it appears I am now losing connection to the speakers which means the music stops and starts, VERY frustrating....! The internet connection via the Airport Express units is not a problem, just the music.
Has anyone had similar problems and is there an answer...??????

Check out this article:
http://www.macfixit.com/article.php?story=20070322005336248
I don't know if it's good or anything, but it looks like the info you want.

Trouble printing to Epson Workforce 435 via airport express network

We have an Epson Workforce 435 printer that connects wirelessly to our home network via Airport Express. After we switched to AT&T, we could no longer print from our Windows 7 PC connected to the network via Airport as well. Our Macbook air works just fine. The printer's network status sheet says it is connected, but it's like our computer can't find it on the network. Can't ping the printer's IP address either.

Okay, I have checked the settings on the AX - it is set up to be 802.11b/g compatible, so that doesn't appear to be the problem.
I had a friend come over with her macbook - she was able to detect the wireless network, but wasn't able to connect to it, even when I gave her the password. Does this help diagnose the problem?
Here is additional information about how the AX is currently configured:
In the Airport tab in AirPort Utility:
Wireless Mode: Create a wireless network
Radio Mode: 802.11b (802.11b/g compatible)
Channel: 1
Wireless security: WEP
MAC Address Access Control: Not Enabled
In the Internet tab in Airport Utility:
Connect using: Ethernet
Configure IPv4: Using DHCP
Ethernet WAN port: Automatic
Connection sharing: Off (Bridge mode)
I have tried turning wireless security off, but that didn't help the problem. I have also tried turning MAC Address Access Control to Timed Access, inputted the MAC address of the printer, and gave it permission to access the network all day, everyday, but this didn't work either. I have looked at changing the connection sharing settings, but I don't really understand what I'm doing here, so I am reluctant to mess with things much. This seems like the most promising potential solution?
Thanks!

G5 & PC NOT STAYING CONNECTED VIA AIRPORT EXPRESS!

I've got a G5 and a PC - Hoped that Airport Express would allow both to access internet (via cable modem).
The connection drops after a little while. Everything says its working but obviously it's not.
ANY HELP??!!!
Thx!

reinis wrote:
I have white Macbook (802.11g capable) and Airport Express (802.11g capable).
I have a LAN internet connection, which is pretty fast. When I connect the cable to my ethernet and try to download something (for instance, speedtest.net) then the download speed is 33Mbit/sec, and upload is 20Mbit/sec.
I also have an Airport Express router - the 802.11g to be specific. So in the Airport Utility, under Wireless I selected "802.11g ONLY" and selected 24Mbit/sec Multicast rate.
When I tried to download something when conected to my Airport Express router - what actually happened, is that my computer is 2 m away from the Airport Express and the max download speed approximately should be ~24 Mbit/sec, but it turns out that the down speed is ONLY 14 Mbit/sec and the upload speed is 11 Mbit/sec.
So it means, that the Airport Express actually cannot deliver the 24 Mbit/speed.
I am actually pretty dissapointed, because I was kind of okay with the fact that I will loose those ~10 Mbit/sec from my actual internet sped when connected via Airport express, but I did not expect that it would be halved.
Any solutions?
According to one source, the maximum throughput of 802.11g is 25 Mbps. That assumes ideal conditions. To learn more about those conditions in your case, launch AirPort Utility, double-click on your AirPort station to enter "Manual Setup" mode, select the "Advanced" panel, click on the "Logs and Statistics" button, then click on the "Wireless Clients" tab. There you will see values for signal and noise. The closer those two numbers are together, the worse throughput you can expect.
If the value for noise is high, you might try setting your AirPort unit to a different channel.
All the above is based on your having no other Wi-Fi equipment.

Connecting via AirPort Express: Performance Help Needed.

Hello,
I'm grateful for ideas, instruction, pointers to threads I may have missed re: improving performance/determining the cause of poor performance when connecting via AirPort Express.
The deal: Up to 6 devices are connected to our AirPort Express. Only three of these are ever used simultaneously, though all remain "on," in either sleep or hybernate mode. Performance across the network is terribly uneven. Current data rate stats (a snapshot by way of the AirPort utility, in order of distance from the router):
iMac: 130 Mb/s
Printer: 54 Mb/s
Macbook Pro: 144 Mb/s
iPhone: currently "off"
PC (Connected via Belkin USB-type Wireless Adapter): 2 Mb/s
iPad: 39 Mb/s
Note: the Macbook Pro is often located in a room farthest from the hub, some 120 feet away and with partial direct line of site. Still, its performance is unimpeded.
At first glance, logic would dictate the worst problem is on the PC and caused by the Belkin adapter. But I've swaped that out for different USB solutions. Performace is seldom improved.
Wondering if:
a) The PC problem is in the data transfer rate of the PC bus. (Foregive me if I'm using "bus" incorrectly here. I'm guessing you'll know what I mean.) Or is it the nature of the USB adapters?
b) Please also note that the Printer, which sits close to the router, often has a drop in data rate, sometimes to the single digits.
Again, I'm grateful for ideas, instruction, or pointers. Also for wisdom on "extending" the network, perhaps by adding another AirPort device. I'm rather clueless about such stuff.
Thanks in advance- Best for the weekend-

Thanks,
I'm pretty sure the card is seated properly (it works most of the time after all). I couldn't get it to work when I installed it because it wasn't seated properly, I pushed it in as far as it could possibly go and it has worked since (except after extended periods of use). The Airport express is three feet from the eMac with only a couple of bits of wood between them. The connection does not go down at times which I can link with the use of any particular appliances (When the eMac stops working, the iBook is always fine, even in a similar position). It is the apparently time-dependent aspect that I can't figure out (I only notice it on those, fairly infrequent, occasions when I am online for a few hours at a time). The eMac discussion group is a good tip. Ta.

Unable to print to my Oki C3200 via Airport Express

Hi
I wish to print wirelessly via Airport Express using my Oki C3200 printer. I have followed all the recommended install procedures.
I am using a Windows Vista Home Premium 32 bit PC, have configured the printer with Bonjour for Windows, and still cannot print.
The printer works fine if connected by USB direct to the PC.
Any help appreciated.

Yes, my iMac is hooked to my Airport Extreme through it's ethernet port.
No, I don't have AIM.

Internet stopped working via airport express

Similar Messages

Maybe you are looking for