Internet stopped working when connected to Cisco VPN

Hi,
I have configured IPSec (Ikev1) Remote access VPN in ASA 5520, VPN is connecting properly and i am able to access all internal resources but Internet is not working when connected to VPN. I have investigated on this and found problem with the default gateway, i am getting ddefault gateway duringVPN connection. I am surprised in ASA there is no default gateway configured for remote VPN IP pool then how remote clients can get default gateway.
I am describing my problem in below given image Please help me to shootout it.
Thanks in advanve.

Hi,
The top configurations is specified to Tunnel All traffic as you can see from the "split-tunnel-policy tunneall". In this case the Split Tunnel ACL is ignored to my understanding.
The bottom configuration is specified to use Split Tunnel but I cant see the ACL specified there.
To my understanding you should be seeing routes on your actual computers routing table for the networks that are reached through the VPN.
On a Windows machine you can open the command prompt and issue the command "route print" to view the routes
Here is an example when I am connected to one Split Tunnel VPN (click to enlarge)
To my understanding there is no default gateway in the virtual VPN interface configurations as the host forward all the traffic that needs to be tunneled to the actual virtual interface and from there on in it heads through the VPN Connection.
Here is an example what the VPN Client Statistics/Route Details tells me
Both Internet and the remote network/host behind the VPN connection can be reached.
What does the above window show for you in your VPN Client when active?
- Jouni

Similar Messages

Hi Team, Showing Yellow icons after every 15 to 20 Min and internet stop working.when we enable- disbale the network connection then will internet start working fine.Some time network connection is disable but when we renable that connection it will st

Hi Team,
Showing Yellow icons after every 15 to 20 Min and internet stop working.when we enable- disbale the network connection then will internet start working fine.Some time network connection is disable but when we renable that connection it will stuck on enabling
and will not renable till i am not restart that machine. I have 350 Machine in network but facing this issue in 25 machines. Kindly help me on this issue .
Regards
Sahil bhateja

Hi，
So switch a LAN card fix this issue...seems a compatibility issue or maybe some packs or programs you installed recently cause this issue.
Have you manually check the network adapter driver from the PC's manufacture website? sometimes, it will be a time delay before Microsoft push out the driver update.
Check if issue exists in safemode with network, this mode will launch Windows with limited sets of files and drivers.
if you have a restore point, restore the pc to a previous point at which the pc is functioning fine.
Yolanda Zhu
TechNet Community Support

ITunes has stopped working when connecting new iPhone 6

I am getting what seems to be a common error "iTunes has stopped working" which I have tried many different tricks for fixing that I have found online, but nothing seems to work.
I have been using an iPhone 5 and backing up and syncing with no problems, the only problem being when I try to access the iTunes Store. This didn't bother me too much as I can access the store on my phone and everything else on iTunes worked fine.
But today I bought an iPhone 6 and as soon as I connect it (whether iTunes is already open or opens when I plug the iPhone in) I get the above error message and iTunes closes. So I am unable to sync my back up on to the new phone or use it at all.
Can anyone help with a recent fix for this, or a way around it?
I have tried copying recommended files into the correct folder, re-installing, opening as administrator and many other things I have come across online, but majority of these seem to be from a year or more ago. I am using Windows 7 on a PC, with the latest iTunes that I have just re-installed (again).
Any help would be really appreciated!

Same here....also when I restart iTunes afterward, all my devices don't even show up in iTunes at all until after you restart the computer
Even then, the problem persists. And I've tried all kinds of troubleshooting techniques

ITunes stop working when connecting ipod 4th generation on Vista

When connecting ipod 4th generation to a computer running Vista Ultimate, ITunes (version 8) closes. Windows provide the following message - iTunes has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
Thanks!

i have the same issue... but i found a workaround.. i tried 3 diff OS's . didnt change the problem. To Add apps or music to ur Ipod... simply DISCONNECT the Ipod from the PC then add files/folders to library. Then connect the ipod back to PC and sync. it has no problem adding the files that way (at least in my case) I hope this helps... Good Luck =)

ITunes stops working when connecting to store. Solutions?

When attempting to conect to iTunes store a message appears "iTunes has stopped working" and it shuts down. I have updated and re-installed latest version and still I can't connect. All else within iTunes seems to work fine. I have Windows8.
I see many others have had similar issues but I haven't seen any solutions.
Anyone have any idea's?

COPY QTMovieWin.dll FROM c:\program files (x86)\common files\apple\apple application support\ INTO c:\program files (x86)/iTunes"

Itunes stops working when connecting to itunes store

I just accepted an upgrade to itunes today and since then I can open itunes, but the moment I try to connect to the itunes store it stops working and is closed by Windows. I have unistalled itunes and all linked software and reinstalled, but to no avail!!

Courtesy of another user, and because the Devs are useless, I'm copy/pasting the fix from another thread that only iTunes users figured out
"DonInDassel Minnesota
Re: itunes 11 crashes when accessing the itunes store
Sep 25, 2013 7:21 PM (in response to DonInDassel)
OK - here's the fix! If you are running iTunes 11 on Windows 8 and iTunes crashes when you go to the iTunes store, you just need to copy a dll file:
Dopying the QTMovieWin.dll from c:\program files (x86)\common files\apple\apple application support\ INTO c:\program files (x86)/iTunes"

Stops working when connecting to previous purchases

When I attempt to connect to "download previous purchases" Itunes stops working Windows 7

COPY QTMovieWin.dll FROM c:\program files (x86)\common files\apple\apple application support\ INTO c:\program files (x86)/iTunes"

Hyper v manager: "virtual machine connection has stopped working", when connect to VM

Hello,
cannot find any info on web and View problem details in VIRTUAL MACHINE CONNECTION error box:
"virtual machine connection has stopped working".
I get this error when click Connect in HV Manager. The machines are on and are accessible through RDP.
This is a lab host after restart it randomly works. I have this problem during last week.
Just interesting to know what could cause the problem and if other were seeing something like that...
Also, can connect to machine from SCVMM.
Thx.
"When you hit a wrong note it's the next note that makes it good or bad". Miles Davis

I have the same problem.. Running hyper-v manager from win7 x64 client...
Problem details:
Description:
Stopped working
Problem signature:
Problem Event Name: CLR20r3
Problem Signature 01: vmconnect.exe
Problem Signature 02: 6.1.0.0
Problem Signature 03: 4ce75fbd
Problem Signature 04: vmconnect
Problem Signature 05: 6.1.0.0
Problem Signature 06: 4ce75fbd
Problem Signature 07: 107
Problem Signature 08: 29
Problem Signature 09: System.ArgumentException
OS Version: 6.1.7601.2.1.0.256.4
Locale ID: 1033
I have the exact same issue (running windows 2008 R2 Enterprise). I can RDP to any of the VM but simply cannot connect using console. This is causing me grief since I have to create few more VMs and work with the existing VMs. Without console
access, I cannot create and do any config changes for new VMs. Can someone help. Things that I have tried so far.
1. Exported VMs
2 uninstalled .NET 4 & 3.5.
3. Hyper-v role removed.
4. Reinstalled Hyper-v, reinstalled .NET 4 & 3.5, patch current as of today.
5. Imported the VMs back and still cannot connect. Exactly same error. No errors in any logs in event viewer or Hyper-v logs.
6. Navigated to c:\Program Files\Hyper-v and manually run the VMCONNECT.EXE app (choosing the localhost/server and appropriate VM from the list) but no dice. The app just sits there for ever without any connection.
7. I am baffled and surprised no one has a solution. Tried multiple search engines.
8. The host machine is patch current as of today and there are no patches available to try. Reading through some forums, I have also installed some hotfixes with no luck.
9. Finally, I can see the little graphic for each VM changing as windows is loading or stopping in server manager for hyper-v.
Hoping someone has a solution. The error that pops up is exactly similar and no clues of the faulting module.
Appreciate your time and help.

RH has stopped working when connecting to source control

I have one RH 10 project that connects to TFS for source control. Starting this morning, I get the "Adobe RoboHelp 10 has stopped working. A problem caused the program to stop working correctly" error when I use the Open Project from Version Control icon. The project opens fine if I do it directly from my PC. This is not happening with any other project connected to TFS. Is there a file in the root directory that is corrupted that I can delete?

In that case it means finding out what is going wrong.
First off, will the project work without source control? Make a copy of the project, trash the CPD and remove the link to source control (See October 2004 - Banishing the sorcery) and open the project. Same problem?
The way I would try to find the problem: Create an new project, import some 50 topics from the old, close the project and reopen it again. As soon as RoboHelp starts crashing, you know in which batch the faulty file is located. Finetune untill you find the culprit and fix it.

Reminder app stop working when connecting it to iCloud

The reminder app suddenly stopped working. I can start the app but it doesn´t show any reminder list. I´m not able to show the main window with ⌘+0. This first happened to me under Mountain Lion. After upgrading to Mavericks everything seemed fine again and worked flawlessly. After a couple of weeks the same problem occured again. The only solution I have come up with yet is do disconnect Reminder app from iCloud reminders. After doing that I can start the app again it seems to work fine, without the reminders in iCloud though. I have tried to reinstall Mavericks but with no luck. Is there any solution for this problem available or is this a know bug which will be corrected anytime soon? I use the Reminder app all day at work so now this is very frustrating to me not being able to trust this app.

Do a backup.
Quit the application.
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Select Library/com.apple.quicktimeplayer.plist. Then go to Preferences. Move the .plist to your desktop.
Restart, open the application and test. If it works okay, delete the plist from the desktop.
If the application is the same, return the .plist to where you got it from, overwriting the newer one.
Thanks to leonie for some information contained in this.

Apple TV optical Audio stops working when connected to switch

Hi everyone,
I'm installing a brand new Apple TV in the following setup:
Apple TV (is up to date)
- HDMI to HD Beamer
- Optical Audio to Sonos Playbar (Works instantly)
- Optical audio through switch to Sonos Playbar which doesn't work
UPC Box
- HDMI to HD Beamer
- Optical audio to switch to Sonos Playbar (Works instantly)
I've tested all the ports on the switch and cables already and they all work. So the weird thing is when I connect the optical from Sonos directly to the Apple TV it works perfect. But when I use the switch it doesn't work. I see a light in the switch so there should be signal...
The switch I'm using is:
http://www.allekabels.nl/optische-kabels/5/1424/optische-schakelaar.html
I've read older questions and tried different audio settings but nothing seems to work. Can anybody help me?

so i solved my own problem haha here's what i did incase anyone has the same issue
go to system preferences > sound > output > click on headphones then turn the volume up from mute
for some reason every time i reconnect to the uni wifi it goes back to mute. not the regular volume only the one through that pathway.

Internet wont work when plugged into charger

my internet stops working when i plug my macbook into the charger. does this make any sense at all???

HI and Welcome to Apple Discussions...
It would help if you told us what type of internet connection you are using. Wireless? Ethernet?
Carolyn

Since about 2 weeks ago for no apparent reason, the internet on my iPad suddenly stopped working (when I open Safari, it says: "Safari cannot open the page because it is not connected to the Internet"), even though the Wifi icon in the top left corner sti

hi

Since about 2 weeks ago for no apparent reason, the internet on my iPad suddenly stopped working (when I open Safari, it says: "Safari cannot open the page because it is not connected to the Internet"), even though the Wifi icon in the top left corner still shows full signal. However, I noticed when I went into Wifi settings (Settings>Wifi) that there is no checkmark next to my network name (only the spinning circle icon, as if it's trying to process something). This only happens at home (I can browse the internet while connected to Wifi at university). My other Apple devices (MacBook Pro and iPhone 4S) work perfectly fine at home.
I've tried resetting my router, restarting my iPad, resetting Network Settings on my iPad, and tried following Hynes' instructions on this thread:https://discussions.apple.com/thread/2453187?start=15&tstart=0, but nothing has worked so far (although I have to admit that I found the instructions on that thread somewhat confusing, so there is a chance that I accidentally did not follow them properly).
Could someone please help? It'd be VERY much appreciated.

Message: itunes has stopped working when I connect ipod touch-windows 7

message: "itunes has stopped working" when I connect ipod touch-using windows 7

Make sure to check your internet settings or the settings on your wi-fi server (if accessible). You may also want to make sure that your not in a place where wi-fi is obtructed.(concrete walls other machines, etc.)

Itunes stops working when i connect my ipad windows error message comes up looking for solution but then closes itunes.

Can anyone help my itunes stops working when i connect my ipad to my computer a windows error message comes up looking for solution but then closes itunes.

Hi tokley13,
To troubleshoot this issue where iTunes is quitting unexpectedly, please follow the steps in the article below.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues - Apple Support
Thanks for using the Apple Support Communities!
Cheers,
Alex H.

Internet stopped working when connected to Cisco VPN

Similar Messages

Maybe you are looking for