Internet Tablet 770 and RS-MMC

Hi
I m wondering if the 770 and OS 2006 will accept RS-MMC with larger memory that the 1 GB mentioned on the specs. RS-MMC currently shipped on the market are up to 8 GB (says Wikipedia).
I find the 770 internal memory quite low in comparizon with a few PDAs that can do the same Internet and multimedia player job...
..and if ever Apple launches a 30 or even 60 GB Ipod with wifi/Bluetooth capacity, a mininum 3,5 inch screen, and a browser, I don't give much of the competition.

At this moment the 770 with OS 2006 only supports a 1 GB RS-MMC DV card. There seems to be an unofficial patch that provides 2GB support. But you have to install this manually at the OS prompt level (linux), so this is only for techies (see maemo.org). I'm waiting for the offical support. At this moment (sept 2006) you can only buy up to 2 GB RS-MMC cards (maybe only Kingston). Wikipedia is incorrect.

Similar Messages

Can a Nokia 770 Internet Tablet link with a Sony E...

Can a Nokia 770 Internet Tablet link with a Sony Ericson K750i as a Modem?

Did a little more digging and found that quite few people have problems getting this phone to do dialup with anything other than a laptop and SEs own software.
reason is that SE use some funny command structure, instead of *99# they use *99***1#
The number 1 there is important, it is the internet profile to use for the dialup, there will probably be several settings in
Menu->Settings->Connectivity-> Internet Settings -> Internet Profiles ->
In the phone, and so the number will need to match the one that is configured for Internet access (and not Wap or MMS)
Also the N770 will need to be configured to send *99***x# (change the x to the number of the connection). I have never used the 770, but looking at the user guide you need to go to
Control panel > Control panel > Tools > Mobile operator setup wizard
Create a connection as described on page 27 of the user guide, the settings will be network operator dependent, but the key thing will be to configure the Dial-Up number to be *99***x#

Java on 770 Internet Tablet

I just received a Nokia 770 and when I go to certain websites (i.e. Pogo.com) it will tell me that Java is not installed on my system and will not open a window to access the games.
How do I get Java installed on my 770 or can I?
Thank you.

There is no Java implementation for the 770 (without using a handheld PC, I don't know of any handheld devices with "full" Java - J2SE - support required by some web sites).

Nokia 770 and Adobe Flash Player

I have been to a number of sites, like youtube.com, where I am directed to get an updated flash player, and then i am routed to the Adobe Flash Player for Linux download page. Unfortunately, the download button is not shown on the 770, while it is shown when I use my computer. Even if I could download it, the instructions pertain to a computer with a Modzilla browser.
Does the 770 have a flash player, and can it be updated?

Question: When is an 'Internet' Tablet not an 'Internet' Tablet?
Answer : When like the nokia 770 it comes with an outdated flash player that can't be updated!
To own one of these 770s with a completely out of date (cira 1998 for flash 6?) flash player is like owning a car (recently purchased) that will not drive on newly built roads!
I got my mind around the 770 not having a decent Calendar a some time ago (eventhough you get a Calendar on the most basic Nokia phone!). The Geeks of Nokia tell us "This is not a PDA & that why it doesn't have a Calendar". Ok so it is not a PDA but if it is an 'Internet' Tablet, why is the flash player so out of date?? Why don't Nokia release an updated version for it?? This device was on sale in the UK upto about 2 weeks ago through Nokia's own web shop for £243 !!
If Nokia think all 770 users should buy an N800 just to get upto date internet capability, here is my answer: IN NO WAY 'JOSE'!! I am looking at alternative options.

Installing on a new Archos 101 internet tablet

I just bought this new Archos 101 internet tablet. I would like to install firefox on it so that it will assist me in reading some of the pdf.files i receive.according to your site, my unit is supported. I would appreciate any assistance. Thank you.

I have tried and tried. Found the Android market app and have tried to install many times. The popup. Window says I do not have any "Android phones" connected with my account. The only thing I have is the Android Tablet. I am begining to think buying the tablet was a mistake. Please help if you can. Thanks.

Using Flashplayer with Archos 101 Internet tablet

I'm having problems streaming flashplayer video on my Archos 101 internet tablet. The audio is fine, but there is a delay in the video. I wanted to know if the processor was too small? 1.0 ghz. Is there anything I can do?

It is working on Archos 101 gen8. The only problem is it tries to reconnect after tablet wakes up and necer manages to sign in until you try to interrupt signing in. Then it signs in.

Archos 101 internet tablet

Can skype please develop a version fot the archos 101 internet tablet which runs frayo, as the tablet has wifi and camera for video calling over the internet via wifi ona bt network. This tablet can then be used over wifi networks. And later to used fr piad service to dial landlinea etc via the internet. The present andriod apps all want mobile phone capability . There is a market for frayo tablets using skype over the internet.

It is working on Archos 101 gen8. The only problem is it tries to reconnect after tablet wakes up and necer manages to sign in until you try to interrupt signing in. Then it signs in.

Placing a call through the internet tablet

I am thinking of purchasing the 770 internet tablet. I also have a nokia N70. When the two are connected via bluetooth will I be able to place a regular call (not internet) to a contact?

Not using the 770 (note, that it has been replaced by the newer N800, so consider getting that, instead).
Message Edited by petrib on 23-Jan-2007
04:47 PM

Vonage for Nokia 800 Internet Tablet

Hello all,
Has anyone tried to use N800 with a Vonage account? I would like to know that before I get one.
Thank you very much in advance,
Giannis

I updated my N800 late last year and i was able to find the OS2008 update and update using the nokia Internet Tablet Suite update wizard, or whatever it was called lol. Google is your friend here, but it was on the official Maemo repository if thats any consolation.

Nokia n800 internet tablet

Can anyone help me to find tha latest os2008 update. Want to start using my old tablet again but unable to because of some bugs. Tried to find the rx-34 .... firmware to download but that was impossible, there's no place where it's left for downloading. Please someone (or Nokia) help!

I updated my N800 late last year and i was able to find the OS2008 update and update using the nokia Internet Tablet Suite update wizard, or whatever it was called lol. Google is your friend here, but it was on the official Maemo repository if thats any consolation.

I cannot receive email properly now. When I open mail, it says that is downloading about 1,700 emails. At the very end, it gives me my newest ones. But this takes a long time. I've contacted the Internet service provider and verified all the right setting

I cannot receive email properly on either my IPad or my IPhone. I have had them for over a year and they have always worked fine. Until three days ago, when they both started acting up. On the IPad, when I open mail, it says it is downloading about 1,700 emails. At the very end, which takes quite a while to get to, I finally get the most recent ones. The IPad is sending emails just fine.
On my IPhone, when I open mail, it says it is downloading 100 emails, but it doesn't do that. And it gives me no new emails at all. The IPhone is sending email just fine.
I have already deleted the email accounts on both devices and reinstalled them. I've contacted the Internet service provider and verified all the right settings. The Outlook email on my desktop is working perfectly.

WMV is a heavily-compressed format/CODEC, and the processing time will depend on several factors:
Your CPU, which is not that powerful in your case
Your I/O sub-system, which is likely a single HDD on your laptop
The source footage. What is your source footage?
Any Effects added to that footage. Do you have any Effects?
Each of those will have an impact on the time required.
The trial has only one main limitation - the watermark. Now, there are some components, that have to be activated, but are not with the trial, but they would be evident with Import of your source footage, if it's an issue.
Good luck,
Hunt

What do i do if my internet is wep and i need it to be wpa2 because my ipod touch 4th gen connects to the internet but when i click on safari or itunes it says safari cannot open the page because its not connected to the internet

what do i do if my internet is wep and i need it to be wpa2 because my ipod touch 4th gen connects to the internet but when i click on safari or itunes it says safari cannot open the page because its not connected to the internet. i have contacted apple support and they said to change from wep to wpa2 but when i change it to wpa2 and type in password and connect on my laptop it says the saved setting on this computer for the network do not match the require ments of the network

My 2nd gen works fine with WPA2 and AES encryption.
You may need to go back and start over. Reset the router back to factory defaults, log on as the admin, set up security, DHCP, and make sure the IP address pool has enough IP addresses to lease to ALL of the computers/devices that will connect to that the router.

Yoga 2 Pro - Frequent issues after Tablet Mode and Suspend in Windows 8.1

Hi,
I bought a Yoga 2 Pro running windows 8.1 in December 2013. The machine runs fine, but from the beginning I experience frequent system issues whenever I have the Yoga in Tablet mode (display turned to the back).
The issues sometimes arise directly after I resume from tablet mode. More frequent the issues appear once I had the machine in tablet mode and after had it in suspend mode!
Some of the frequent issues that arise after I resume from tablet mode:
Power surge at right USB Port, where I have my mouse connected! The connected device cannot be provided with enough power. (Note, the left port still works), or
WiFi not working any more (No WLAN device detected, WLAN not functional), or
Bluetooth not working (No Bluetooth device detected, BT not functional)
All issues reliably disappear with a system restart!
I have already updated my drivers, scanned the Lenovo and Microsoft forum whether this is known without success and hope this avenue will bring me more luck.
What makes the bug hard to narrow down is that I do not have a recipe to reproduce the error. Not every time I turn the display in tablet mode the symptoms are equal! But what I can is that the tablet mode is the most common denominator I found so far.
Any helped/suggestions much appreciated.
Regards
   Florian

Yea, great... it seems like these articles and suggestions come up in the forum, and then there is always someone that says "it didn't work but this solved it for me" which ammounts to setting the screen at full brightness all the time.   LENOVO, HOW ABOUT FIXING THE ISSUE!!! It definitly has something to do with power, in my case _the only_ thing that fixes it is either plugging in a power cord or closing the screen, reopening it and hitthing the power button to turn it back on (both are REALLY annoying if you're trying to get work done).
I'm a fairly experienced IT guy, and I used to swear by _IBM_ Thinkpads and related laptops, then when they went to Lenovo a few years ago it seems like the support has gone to hell and the hardware appears nice but is sketchy (this thing should have never shipped with this display problem or the wifi card issues that it shipped with).   Honestly if issues like this don't get resolved Im not likely to order any more, ever. Not for my self or for my organization, we will stop persueing contracts with you and certifying the hardware for our work (though with the lenovo purchase it was deemed that the hardware wasn't certifyable for certine applications anyway). Yes, that will cost you a few thousand sales a year, which is a drop in the bucket for you, but I'm sure I won't be the only one.

Exchange Server 2010 Mailflow between Internet Facing-Site and No Internet Facing-Site

Hi all,
My environment there are two sites, Internet Facing-Site and No Internet Facing-Site.
The mail flow between them, it isn't working. The messages stuck in the queue.
Default Receive Connector No internet facing-site is configured, bellow:
Defaul....
- Transport layer....
-Basic Authentication...
- Exchange Server Authentication.
- Integrated windows....
Configuration the Internet Facing-Site, bellow:
From intenet
- Transport layer....
-Basic Authentication...
- Integrated windows....
And i configured a new receive connector on the Internet Facing-Site, follow bellow:
Sites
- Transport layer....
-Basic Authentication...
- Exchange Server Authentication.
- Integrated windows....
But, the messages yet stay stuck in the queue.
Queue error:
451 4.4.0 Primary target IP address responded with: “421 4.2.1 Unable to connect.” Attempted failover to alternate host, but that did not succeed. Either there are no alternate hosts, or delivery failed to all alternate hosts.
I'm needing help, pls.

Please check SMTP traffic filtering/scanning enabled on the router/firewall. You can telnet even if the SMTP
traffic filtering/scanning enabled on the router/firewall. But emails will not pass through if the configuration is incorrect.
May be speed between sites causing this issue (not sure). Anyway please try changing the Tarpitinterval as a test.
To see the current setting "Get-ReceiveConnector | Select name,tarpitinterval "To set new value "Set-ReceiveConnector “<Connector-Name>”
–TarPitInterval:00:00:010"
Try restarting "MSexchange-Transport-sevice" on both servers as well
Can you send email one-way or
both ways not working?
MAS

Issue with Internet facing site and Intranet sites

Hello All,
I have migrated the SP2013 environment using database attach method for our intranet site. We also working on the
SP2013 Internet facing site using the same content database as Internet site.
When I extended the web application for Internet facing site, zone to
Internet and these are the URLs: The Intranet website URL is
https://intranet.contoso.com/SitePages/home.aspx (Root Site) and
SP2013 Internet facing site http://contoso.com (not a root site and publishing site template)
However, I found on the http://contoso.com users can still access the
http://contoso.com/SitePages/home with same content as Intranet.
After done some Google search, bloggers mentioned to have move https://intranet.contoso.com/SitePages/home.aspx to another site collection so that Internet facing site can exist root site.
Can 2 we have to two root sites in same web application? I need the content database to be same so that managers can check
Internet facing site and after signing into SP2013, redirects to
Internet site.
Which is the best option to achieve this with same content database.
Please advice.
Regards,
Aroh
Aroh Shukla

Business Requirement:
Content Managers want to control internal Internet site (https://intranet.contoso.com) (with default zone, port 443, Root site) and also want to have SP2013 Internet site (with Internet zone
http://www.contoso.com (not a root site and publishing site template)), Anonymous access at Web Application level. I configured the site architecture
to have intranet zone as default zone and extended Web Application for Internet facing site with Anonymous site. This the current site architecture
Because content managers do not want to duplicate public site (Internet facing site) with will be shared with some lists that are stored in intranet site.
For e.g. a sub site named “News and Events” will be shared with Public site as well as Internet users. Therefore, if a manger wants to update a list in the public site, it should reflect in intranet site as well. Thus, managers
don’t want to have separate database but same content database.
Problem:
I have extended web application to have different Internet zone, the site URL looks this: http://www.contoso.com/sites/public with publishing template and Anonymous access. Managers want to have public site URL to be just
http://www.contoso.com and not   http://www.contoso.com/SitePages/Home.aspx. As I am using path based site collection for extending site collection, I am
getting this URL http://www.contoso.com/SitePages/Home.aspx
We also tried host named site collection, but it does not provide anonymous access and keep on asking for user credentials.
Q1: We want to have Intranet and Public site with same content database as per business requirements, Shall I following link       http://sharepoint.stackexchange.com/questions/81172/moving-content-db-for-a-site-collection-to-another-db-server?
Q2: Because I am constrained that I don’t want to have separate web application, (I know, its not regular requirement), how could achieve this requirements?
Q3: Do have to completely re-design web site architecture, with
www.contoso.com as main web application, then copy Intranet site collection and move this to
www.contoso.com/intranet using
Move-SPSite command
Any kind of pointer and help will be highly appreciated as I am struggling for 2 weeks to solve this.
Regards,
Aroh
Aroh Shukla

Internet Tablet 770 and RS-MMC

Similar Messages

Maybe you are looking for