Internet telefone

can someone explain how it works and how to set it up please..

Hi panga
It is using Voip + Voice over internet protocol.
Unless your N95 is branded by certain network providers, you will have found an "internet telephone" icon on your N95.
There are various ways of achieving this. In Nokia beta labs
http://www.nokia.com/betalabs you can find Gizmo software.
You could also look at Truphone and Fring!
Happy to have helped forum in a small way with a Support Ratio = 37.0

Similar Messages

Ich will das iphone4 unterwegs nur als telefon benutzen (keine flatrate) also ohne internet und gps. geht das gefahrlos?

ich will das iphone4 unterwegs nur als telefon benutzen (keine flatrate) also ohne internet und gps. geht das gefahrlos?

Sondele, die Lösung ist gefunden.
Es lag bei mir an einer verbogenen Hosts Datei.
Dort stand irgendwelcher kryptischer Müll in der Datei.
Den Inhalt habe ich entfernt und nun geht es endlich.
Lösung aus diesem Post:
http://forums.adobe.com/message/5866791#5866791

Salve ho un problema con l iPhone da venerdì non posso ricevere ed effettuare chiamate e mandare sms e stranamente però posso andare su internet anche senza il wifi ho provato a mettere la SIM in altri telefoni e funziona!Cosa mi consigliate di fare?

Salve ho un problema con l iPhone da venerdì non posso ricevere ed effettuare chiamate e mandare sms e stranamente però posso andare su internet anche senza il wifi ho provato a mettere la SIM in altri telefoni e funziona!Cosa mi consigliate di fare?

Prova a fare così: spegni qualunque tipo di connessione (wifi, 2G/3G/4G, localizzazione, bluetooth ecc), imposta la modalità aereo, chiudi tutte le app dal multitasking, e poi fai un riavvio (tenendo premuti insieme il tasto power e quello home nello stesso momento; vedrai che lo schermo si spegnerà e si riaccenderà fino a quando comparirà la classica mela all'avvio, in quel momento puoi lasciare i tasti e far finire l'avvio dell'iPhone. Sblocca lo schermo, disattiva la modalità aereo, inserisci il PIN e attendi che riacchiappi la rete e vedi se cambia qualcosa.
Altrimenti potrebbe essere qualche valore inserito ed errato tra le impostazioni del gestore.
Ultima spiaggia prima di andare in un negozio Tre: ripristino iPhone da DFU senza ricaricare il backup precedente e vedi se si ripresenta il problema.

Prepaid Ipad ins internet und telefon???

ich will mir jetzt bald ein IPAd kaufen bin mir aber nicht sicher ob das normale oder 3g kann ich den mit einer prepaid karte telen un ins internet gehen???
bitte schnell hilfe danke im voraus
LG alfwega
Message was edited by: alfwega

Hi,
las deine E-Plus Karte in deinem Handy zum telefonieren und hol dir die blau.de Karte (auch E-Plus Netz). Hier hast Du bessere Konditionen.
Hier erstmal der Link zur SIM-Karte (schon MicroSIM!!!!) http://handyshop.blau.de/handys/blau-de-micro-sim-karte.htm
Und das sind die Preise:
1 MB = 24cent (wenn kein Paket gebucht!)
Oder Paket Preise:
100 MB = 3,90 Euro / Monat
1000 MB = 9,90 Euro / Monat
Flatrate = 19,80 Euro / Monat
Tagesflat = 2,40 Euro / Tag
Empfehlung: Teste die 100 MB mal aus. Falls DU doch mehr surfen solltest, nimmst DU dann halt einen Monat später die 1000 MB (1GB) für 9,90 Euro.
Du kannst jeden Monat hanz einfach online auf blau.de den Tarif wechseln!
Gruß
Thomas
Noch Fragen...?

Nokia Ovi Suite can't connect to Internet

Hi
I was using an old version of Ovi that come with my N95 in a CD.
I'm trying to update my N95 with a new firmware and that request to update Ovi.
After the update I can't login to Ovi in order to update.
There's any problem that Ovi software can't connect or something else.
Obviously, I'm connected to the Internet.
BTW... where's the spanish forum or help assistance?
Thanks in advance!

I have the same problem on pc in the office. I uninstalled and installed the old ovi suite 2, but it dosn`t work. When You connect Your phone it will do, but connect to Your Ovi account through the telefone. I havn`t got any answer until today.
I use Nokia 5230, want to connect to my Ovi account also, when the phone isnt connected to the pc. I hope, we will got a resolution.
By installing the old Ovi suite there are only problems with winxp, it dosn`t work really. Thank everyone for help or answer. philipp

Nokia 2730classic app can't connect to internet

Hi, I'm trying to use the E-mail application of my phone (Nokia 2730 classic) but when I try to connect it says "Comunication Error", I've tried with the Opera mini browser and the native web browser and definitely there is a internet connection available, but when I try with other apps (with the appropiate permissions) there's errors everywhere, "can't connect" "Comunication Error" etc etc etc, does anybody know something about it ? thanks for reading

I have the same problem on pc in the office. I uninstalled and installed the old ovi suite 2, but it dosn`t work. When You connect Your phone it will do, but connect to Your Ovi account through the telefone. I havn`t got any answer until today.
I use Nokia 5230, want to connect to my Ovi account also, when the phone isnt connected to the pc. I hope, we will got a resolution.
By installing the old Ovi suite there are only problems with winxp, it dosn`t work really. Thank everyone for help or answer. philipp

JMF over the Internet / NAT problems

Hi folks,
I wonder if someone could help me out. I'm trying to get RTP streaming to work over the internet; specifically to get a server (with a public IP) to send an RTP stream to a client behind a NAT (so with a private IP address). This is the set-up I have at the moment:
Client expects RTP traffic from server to arrive at its local port A. The server sends out RTP traffic from its local port B (i.e. the RTPManager running on the server is initialised with port B).
Before any RTP transmission occurs, the client sends a few UDP packets from its local port A to the server's port B and also to a different port C. The server listens to these packets on port C, and extracts the client's public IP and port (i.e. the IP address of the NAT router plus the public port on the NAT that is mapped to port A on the client).
When the server starts the streaming shortly afterwards, it sends the RTP packets to the public IP/port it detected earlier. The idea being the NAT should forward those packets to port A on the client. But this doesn't seem to be working....
Does anyone have any ideas what's going wrong? Has anyone else had to tackle similar issues?
Thanks in advance for any help.

* @(#)RTPSocketAdapter.java     1.2 01/03/13
* Copyright (c) 1999-2001 Sun Microsystems, Inc. All Rights Reserved.
* Sun grants you ("Licensee") a non-exclusive, royalty free, license to use,
* modify and redistribute this software in source and binary code form,
* provided that i) this copyright notice and license appear on all copies of
* the software; and ii) Licensee does not utilize the software in a manner
* which is disparaging to Sun.
* This software is provided "AS IS," without a warranty of any kind. ALL
* EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING ANY
* IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR
* NON-INFRINGEMENT, ARE HEREBY EXCLUDED. SUN AND ITS LICENSORS SHALL NOT BE
* LIABLE FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING
* OR DISTRIBUTING THE SOFTWARE OR ITS DERIVATIVES. IN NO EVENT WILL SUN OR ITS
* LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA, OR FOR DIRECT,
* INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES, HOWEVER
* CAUSED AND REGARDLESS OF THE THEORY OF LIABILITY, ARISING OUT OF THE USE OF
* OR INABILITY TO USE SOFTWARE, EVEN IF SUN HAS BEEN ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
* This software is not designed or intended for use in on-line control of
* aircraft, air traffic, aircraft navigation or aircraft communications; or in
* the design, construction, operation or maintenance of any nuclear
* facility. Licensee represents and warrants that it will not use or
* redistribute the Software for such purposes.
package org.zajacslv.java.Telefon;
import java.io.IOException;
import java.net.InetAddress;
import java.net.DatagramSocket;
import java.net.MulticastSocket;
import java.net.DatagramPacket;
import java.net.SocketException;
import javax.media.protocol.DataSource;
import javax.media.protocol.PushSourceStream;
import javax.media.protocol.ContentDescriptor;
import javax.media.protocol.SourceTransferHandler;
import javax.media.rtp.RTPConnector;
import javax.media.rtp.OutputDataStream;
* An implementation of RTPConnector based on UDP sockets.
public class RTPSocketAdapter implements RTPConnector {
DatagramSocket dataSock;
DatagramSocket ctrlSock;
InetAddress addr;
int port;
int portC;
SockInputStream dataInStrm = null, ctrlInStrm = null;
SockOutputStream dataOutStrm = null, ctrlOutStrm = null;
public RTPSocketAdapter(InetAddress addr, int port) throws IOException {
     this(addr, port, 1);
public RTPSocketAdapter(DatagramSocket dsRTP, DatagramSocket dsRTCP,
InetAddress IaRTP, int portRTP, InetAddress IaRTCP, int portRTCP)
dataSock = dsRTP;
ctrlSock = dsRTCP;
//IaRTP == IaRTCP;
//portRTP+1 == portRTCP przez firewoll moze byc inaczej !!!
addr = IaRTP;
port = portRTP;
portC = portRTCP;
public RTPSocketAdapter(InetAddress addr, int port, int ttl) throws IOException {
     try {
     if (addr.isMulticastAddress()) {
          dataSock = new MulticastSocket(port);
          ctrlSock = new MulticastSocket(port+1);
          ((MulticastSocket)dataSock).joinGroup(addr);
          ((MulticastSocket)dataSock).setTimeToLive(ttl);
          ((MulticastSocket)ctrlSock).joinGroup(addr);
          ((MulticastSocket)ctrlSock).setTimeToLive(ttl);
     } else {
          dataSock = new DatagramSocket(port, InetAddress.getLocalHost());
          ctrlSock = new DatagramSocket(port+1, InetAddress.getLocalHost());
     } catch (SocketException e) {
     throw new IOException(e.getMessage());
     this.addr = addr;
     this.port = port;
portC = port+1;
* Returns an input stream to receive the RTP data.
public PushSourceStream getDataInputStream() throws IOException {
     if (dataInStrm == null) {
     dataInStrm = new SockInputStream(dataSock, addr, port);
     dataInStrm.start();
     return dataInStrm;
* Returns an output stream to send the RTP data.
public OutputDataStream getDataOutputStream() throws IOException {
     if (dataOutStrm == null)
     dataOutStrm = new SockOutputStream(dataSock, addr, port);
     return dataOutStrm;
* Returns an input stream to receive the RTCP data.
public PushSourceStream getControlInputStream() throws IOException {
     if (ctrlInStrm == null) {
     ctrlInStrm = new SockInputStream(ctrlSock, addr, portC);
     ctrlInStrm.start();
     return ctrlInStrm;
* Returns an output stream to send the RTCP data.
public OutputDataStream getControlOutputStream() throws IOException {
     if (ctrlOutStrm == null)
     ctrlOutStrm = new SockOutputStream(ctrlSock, addr, portC);
     return ctrlOutStrm;
* Close all the RTP, RTCP streams.
public void close() {
     if (dataInStrm != null)
     dataInStrm.kill();
     if (ctrlInStrm != null)
     ctrlInStrm.kill();
     dataSock.close();
     ctrlSock.close();
* Set the receive buffer size of the RTP data channel.
* This is only a hint to the implementation. The actual implementation
* may not be able to do anything to this.
public void setReceiveBufferSize( int size) throws IOException {
     dataSock.setReceiveBufferSize(size);
* Get the receive buffer size set on the RTP data channel.
* Return -1 if the receive buffer size is not applicable for
* the implementation.
public int getReceiveBufferSize() {
     try {
     return dataSock.getReceiveBufferSize();
     } catch (Exception e) {
     return -1;
* Set the send buffer size of the RTP data channel.
* This is only a hint to the implementation. The actual implementation
* may not be able to do anything to this.
public void setSendBufferSize( int size) throws IOException {
     dataSock.setSendBufferSize(size);
* Get the send buffer size set on the RTP data channel.
* Return -1 if the send buffer size is not applicable for
* the implementation.
public int getSendBufferSize() {
     try {
     return dataSock.getSendBufferSize();
     } catch (Exception e) {
     return -1;
* Return the RTCP bandwidth fraction. This value is used to
* initialize the RTPManager. Check RTPManager for more detauls.
* Return -1 to use the default values.
public double getRTCPBandwidthFraction() {
     return -1;
* Return the RTCP sender bandwidth fraction. This value is used to
* initialize the RTPManager. Check RTPManager for more detauls.
* Return -1 to use the default values.
public double getRTCPSenderBandwidthFraction() {
     return -1;
* An inner class to implement an OutputDataStream based on UDP sockets.
class SockOutputStream implements OutputDataStream {
     DatagramSocket sock;
     InetAddress addr;
     int port;
     public SockOutputStream(DatagramSocket sock, InetAddress addr, int port) {
     this.sock = sock;
     this.addr = addr;
     this.port = port;
     public int write(byte data[], int offset, int len) {
     try {
          sock.send(new DatagramPacket(data, offset, len, addr, port));
     } catch (Exception e) {
          return -1;
     return len;
* An inner class to implement an PushSourceStream based on UDP sockets.
class SockInputStream extends Thread implements PushSourceStream {
     DatagramSocket sock;
     InetAddress addr;
     int port;
     boolean done = false;
     boolean dataRead = false;
     SourceTransferHandler sth = null;
     public SockInputStream(DatagramSocket sock, InetAddress addr, int port) {
     this.sock = sock;
     this.addr = addr;
     this.port = port;
     public int read(byte buffer[], int offset, int length) {
     DatagramPacket p = new DatagramPacket(buffer, offset, length, addr, port);
     try {
          sock.receive(p);
     } catch (IOException e) {
          return -1;
     synchronized (this) {
          dataRead = true;
          notify();
     return p.getLength();
     public synchronized void start() {
     super.start();
     if (sth != null) {
          dataRead = true;
          notify();
     public synchronized void kill() {
     done = true;
     notify();
     public int getMinimumTransferSize() {
     return 2 * 1024;     // twice the MTU size, just to be safe.
     public synchronized void setTransferHandler(SourceTransferHandler sth) {
     this.sth = sth;
     dataRead = true;
     notify();
     // Not applicable.
     public ContentDescriptor getContentDescriptor() {
     return null;
     // Not applicable.
     public long getContentLength() {
     return LENGTH_UNKNOWN;
     // Not applicable.
     public boolean endOfStream() {
     return false;
     // Not applicable.
     public Object[] getControls() {
     return new Object[0];
     // Not applicable.
     public Object getControl(String type) {
     return null;
     * Loop and notify the transfer handler of new data.
     public void run() {
     while (!done) {
          synchronized (this) {
          while (!dataRead && !done) {
               try {
               wait();
               } catch (InterruptedException e) { }
          dataRead = false;
          if (sth != null && !done) {
          sth.transferData(this);
}

Telefon mit Router SRP526W verbinden!

Hallo zusammen.
Ich hoffe das mein Problem so einfach für den ein oder anderen Experten ist, dass mir jemand weiterhelfen kann.
Für unser Büro haben wir einen neuen Router bekommen und zwar den SRP526W. Ich denke das er viel mehr kann, als wir eigentlich benötigen. Das Einrichten der DSL Verbindung hatte schon etwas länger gedauert, aber anhand einiger Foren, kamen wir dann soweit, das Internet nun funktioniert.
Nun stehen wir jedoch noch vor dem Problem, das ein einfaches Telefon angeschlossen werden soll. Den NTBA haben wir bereits mit dem Router über den LINE Eingang verbunden und auch das Telefon mit einem der beiden Telefoneingänge. Irgendwann leuchtete dann auch die entsprechende Lampe am Router, das es mit einem Telefon verbunden ist. Leider ertönt aber kein Freizeichen und Anrufe gehen weder rein noch raus.
Hat vielleicht jemand einen Rat oder gibt es entsprechende Standarteinstellungen die man im VOICE Bereich einstellen kann?
Liebe Grüße,
Josefa

Hallo,
im Falle eines Fehlkers der Breitbandleitung verbindet sich Telefonleitung 1 mit dem FXO Port. D.h. ich kann dann telefonieren.
Koennen Sie mal bitte testen, ob sie telefonieren koennen , wenn die ADSL Leitung aus ist ?
Aus dem admin guide:
Understanding Voice Port Operations
The SRP520 has a number of voice ports that allow calls to be made from locally connected analog handsets or fax machines by using SIP based Internet phone services. In addition to the four handset (FXS) ports, the SRP also has a single line (FXO) port that can be used to place calls to the telephone network in the event of broadband or even SRP failure.
Note: The SRP520 line port is a passive interface that connects the PSTN line with FXS port 1 during failure conditions. Calls cannot be routed dynamically to this interface under normal operating conditions.

After 3.0 uipdate: connection to internet only via WIFI!

After the successful update 3.0 my iphone does only connect me to the internet via WIFI. If that is not avialable - which is the case most of the time - I cannot get into the internet at all. It only says "mobile network could not be activated", but does not connect me via telefone provider as before. This means I cannnot use mail and apps unless I am in a wireless network. Does anyone have experienced the same problem? I tried everything from taking out the sim-card to restart and sychronise again, but no change! Help please, as this is a very serious problem!

Phil,
Thanks for your interest in the problem. My network is rather complicated. A VDSL modem from my ISP does DHCP and NAT for the whole network. An AEBS Gigabit connected to it by Ethernet provides the wireless service, and an AEBS 1st Generation extends it. That network is configured for 802.11n 5GHz. A ZyXel 802.11g router is connected to the AEBS Gigabit via Ethernet and provides wirleess service for slower devices, which don't "see" the 802.11n network. It's the second wireless network to which the iPhone connects. The Macs are connected to the faster one, but can be connected to the slower one. Apparently the devices connected to the 802.11g network weren't getting a DNS, but that wasn't evident when connecting the Macs, because they specify my provider's DNS. (That was necessary because the Mail app was taking a long time to resolve URLs otherwise.) After restarting both AEBS and the ZyXel didn't resolve the problem,. I restarted the VDSL modem. That seems to have done the trick. I can't explain what happened, but I'm happy that the problem seems resolved.

Since I installed FF4 each time I start up internet FF doesn't open and gives the report that it cannot find the proxyserver.

Already I have changed the settings to no proxy, but it doesn't work. Each time I want to open internet again I get the same report and I have to change the setting to no proxy again! Also I noticed that FF has changed the proxy adjustment himself to 'manual proxy configuration' where it has introduced HTTP-proxy 127.0.0.1 and port 63030 himself! How can I change this for good?! So that I don't have to change the setting each time I want to open internet.

Thank you for this information. I am going to get rid of my i Phone5c because of this policy of Apple! Maybe they need sued to stop this policy!

Sprint says Q10 can not access internet/data in Chas/Hunt WV area

So I upgraded to a new Q10 and spent a few hours loading and configuing all my emails, etc.
Driving to work this morning, I noted that there was no emails received after I left my house (wifi-enabled). Tried to open the Browser and received the error stating there was no connection to the internet. Wasted most of the workday fiddling with the settings --- no joy. So on the way home I stop at the Sprint store. I walk in and showed the guy my phone and said, "I need some help with this."
He immediately said, "No internet or data?" Dayum. He went on to say that BB 3G/4G v10 won't work in this area and that BB was aware of the problem. Something about Sprint sharing towers with Intelos and the phones won't recognize something. Over my head, but all other smartphones work here...just the BB Q10 won't.
Really bites --- when I'm on WiFi the thing rocks and is everything I need in a smartphone. So much better than my daughters iPhone 5...except for this.

Not sure if the same but
my brother is unable to get Data on his Sprint iphone unless its on LTE and most where he is is not LTE enabled.
It still makes calls and recieves calls but no data.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

How do I use my Time Capsule with hotel wired internet

How do I use my Time Capsule as a wireless router on my hotel free internet ethernet cable?

It may not be possible..
If they use a web access page, then there is no way you can set the TC to authenticate.. you must use the computer to authenticate and then use the computer to bridge to the TC for wireless clients to access.
Look up instructions on using ICS (internet connection sharing) in the Mac.
eg for 10.6.8 http://support.apple.com/kb/PH6589
eg http://support.apple.com/kb/PH10740
Of course if there is no login then you could just use it.. but I doubt you would be asking if it just worked.

Internet does not work on my tablet

All of a sudden my tablet stopped connecting to the internet more than a month ago. Actually, it might be around the time that I received an email from Comcast stating that there was free xfinity wifi that the internet stopped working. There seems to be nothing wrong with the modem because the internet connection on my desktop has been working fine. There has been "intermittent" connections but not a reliable, steady connection. What is going on that my tablet can no longer connect to the internet?

I would recommend checking what wifi network you are connecting to. Xfinity wifi is their hotspot not your internal network. if you are connected to the xfinity wifi it will not work unless you sign in.

Internet Streams in Playlists do not show up on Apple TV

I use the following setup:
- Apple TV MD199LL/A (Software 6.0.1) just updated to the latest
- iTunes 11.1.3 for Windows (from a Windows 7 x64)
- iTunes 11.1.3 for MAC (from a Apple MacBook Pro x64, Maverix)
Homesharing is turned on both computers
From both machines I share pictures, videos and music.
All photos, videos and music files are getting displayed on the Apple TV menu, and can be played.
All iTunes playlists from both machines are getting displazed on the Apple TV
BUT!
If a internet stream is added to a playlist, this entry does not show on the Apple TV menu.
If the playlist contains only internet streams the Apple TV menu says "There are no songs in this library"
If I hit the play key on my remote, it will randomly play the first stream in the playlist (not realy reproducable pattern)
I can play those streams in iTunes and send it via AirPlay without problems,
Can anyone help me with this and tell me what I'm doing wrong?
Thank you

You can only view that rental on the iPad. For it to show up it has to be rented directly on ATV or through a computer and streamed via home sharing

Create a public Internet facing site with SharePoint Foundation

Hi,
Would I be able to use SharePoint Foundation to create a public Internet facing site? In addition, where can I find tutorial on how to create public Internet facing sites?
Thanks a lot!
Eduardo

Hi Eduardo,
You can create public Internet facing site using SharePoint Foundation, e.g. www.wssdemo.com
Regards,
Vladimir
MCTS, SharePoint tips blog: http://buyevich.blogspot.com

Internet telefone

Similar Messages

Maybe you are looking for