Internet TV in Windows Media Center

Hi there,
I have been trying to set up Internet TV in Windows Media Center but to no avail. I followed all the instructions given by Microsoft but I still cannot get the Guide to show up. I even tried setting up Internet TV in the WMC gadget but it is greyed out. Can anyone offer any advice that hasn't been offered by Microsoft that will help? Thanks in advance. I have a W700 running Windows 7 Ultimate 64.
Noel
Moderator note: subject line adjusted for clarity

From what I can figure out, Canadians are not allowed to use internet TV. I would love a solutiuon.

Similar Messages

Problem connect mac to internet with pc w/windows media center os

I share a wireless DSL connection with my roommate. Everything was working fine for a long time until she bought a Sony PC with Windows Media Center OS on it. Every time she connects to the internet, she doesn't think it works very well for her. But, if she leaves the house (and therefore is not using her computer online) I can reset the DSL modem and the wireless router and then my internet connection from my iBook works like a lovely breeze. Then she comes home, connects her computer and the internet doesn't work for either of us. She insists it is not "her computer" and doesn't believe that I could be receiving such a seamless connection when she's not around. Does anyone know (1) if there are issues with Windows Media Center OS that would cause this problem and (2) What I can do to fix the situation?

Actually, it sounds like her computer might have a Static IP set, which tries to grab your IP... you might cure it by changing your setup to "Using DHCP with Manual Address" and using a couple numbers higher than what it says when it does work.

How do I get fios to work with my new desktop w/ Windows Media Center

Can someone please help me I have "fios".TV and internet 1HDSTB + 1HDDVR with multi room dvr Home media mgr.how do I get fios to work with my new desktop HP Pavillion m9715f**(specs below)**w/ Windows Media Center or did I just throw away my money?
also equipted is 47" Samsung 850series 1080p 120hertz HD LCD TV + 36" Samsung 560series 1080p 60hertz HD LCD TV and 19"Samsung 950b LCD Monitor
** computer specs**
Product number NZ017AA
Introduction date 30-Jun-2009
Country/region sold in: United States,Canada
Hardware Base processor
Phenom-9650 (A) 2.3 GHz (95W) 3600 MHz HyperTransport 3.0 Socket, AM2+
Chipset AMD 780G
Motherboard Manufacturer: MSI Motherboard Name: MS-7548 HP/Compaq motherboard name: Aspen-GL8E
Power supply 300W
Memory
Component Attributes Memory Installed 8 GB Maximum allowed 16 GB (4 x 4 GB) (64-bit OS)
4 GB* (4 x 1 GB) (32-bit OS)
*Actual available memory may be less Speed supported PC2-6400 MB/sec Type 240 pin, DDR2
Hard drive750 GB SATA 3G (3.0 Gb/sec)7200 rpm
Blu-ray player & SuperMulti DVD burner with LightScribe Technology drive
This Blu-Ray Disc DVD drive introduces a player that reads Blu-ray Disc format enabling you to watch high-definition Blu-ray Disc movies. NOTE: This drive does not include high-definition write capability.
Formats/Disc types Write speeds Read speeds Storage capacity Blu-ray Disc BD-ROM SL NA up to 6X up to 25 GB BD-ROM DL NA up to 4.8X up to 50 GB BD-R SL not supported up to 6X up to 25 GB BD-R DL not supported up to 4.8X up to 50 GB BD-RE SL not supported up to 2.3X up to 25 GB BD-RE DL not supported up to 2X up to 50 GB HD DVD not supported DVD DVD-ROM SL NA up to 16X up to 4.7 GB DVD-ROM DL NA up to 8X up to 8.5 GB DVD+R SL up to 16X up to 12X up to 4.7 GB DVD+R DL up to 4X up to 8X up to 8.5 GB DVD+RW SL up to 8X up to 10X up to 4.7 GB DVD+RW DL not supported DVD-R SL up to 16X up to 12X up to 4.7 GB DVD-R DL up to 4X up to 8X up to 8.5 GB DVD-RW SL up to 6X up to 10X up to 4.7 GB DVD-RW DL not supported DVD-RAM up to 5X up to 5X up to 4.7 GB CD CDROM NA up to 40X up to 700 MB CDR up to 40X up to 40X up to 700 MB CDRW up to 24X up to 40X up to 700 MB CD-DA NA up to 32X up to 700 MB Video CD NA up to 10X up to 700 MB
Wireless Wireless LAN 802.11 b/g
Video Graphics Radeon HD4350
512 MB DDR2 memory
I/O Ports: HDMI, VGA, single-link DVI
Television Hauppauge ATSC/NTSC TV tuner card with FM tuner
Sound/Audio High Definition 8-channel audio
ALC 888S chipset
Network (LAN) Integrated 10/100/1000 Base-T networking interface
Memory card reader
Contains an Infrared receiver for remote control
Supports the following cards:
Compact Flash I
Compact Flash II
IBM Microdrive
Secure Digital (SD)
mini-SD
MultiMediaCard (MMC)
Reduced size MultiMediaCard (RS-MMC)
MultiMediaCard Plus (MMC plus)
MultiMediaCard Mobile (MMC mobile)
Memory Stick
Memory Stick Pro
Memory Stick Duo
Memory Stick Pro Duo
SmartMedia
xD Picture Card (xD = extreme digital)
External I/O ports
I/O ports on the front panel
Port type Quantity 15-in-1 (4 slot) with IR Receiver One USB Two Headphone One Microphone One Audio L-R One S-video in One Composite video in One
I/O ports on the back panel
Port type Quantity PS/2 (keyboard, mouse) Two S/PDIF out (coaxial) One VGA One (disabled due to the installation of a graphics card) DVI-D One USB Four 1394a One LAN One Audio (side speaker out, rear speaker out, center/subwoofer-out , line-in, line-out, microphone) One Each
Expansion slots
Slot type Quantity PCI Express x16 One (None available) PCI Express x1 Three (Two available)
Drive bays
Bay type Quantity 5.25" Two (One available) 3.5" Two (One available) Personal Media Drive One (One available) Pocket Media Drive One (One available)
Keyboard and mouse HP multimedia keyboard HP PS/2 optical mouse
Remote Control USB infrared remote control,Remote control expansion card with IR ports,IR emitter cable to transmit codes to a set top box

Based on what you've posted, your computer does not have the right tuner. You need a QAM tuner to record locals from FiOS, or a CableCard tuner to record all local and cable channels from FiOS.
QAM tuners to record local channels only
This requires Windows Vista or Windows 7
Hauppauge WinTV-HVR-2250
SiliconDust HDHomeRun (info on a sale)
CableCard tuner to record local and cable channels
This requires Windows 7 + one CableCard from Verizon for $3.99/mo
ATI TV Wonder Digital PC CableCard Tuner (records one channel at a time) -- $200-$250 on ebay
Ceton MOCUR tuner (records four channels at a time) -- coming in early 2010 for $400-$600
Make sure your computer has Windows 7 Home Premium (or better) installed. That's necessary to support CableCard tuners.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it.

Actiontech router and Windows Media Center on Win8

While waiting for Verizon to solve their network problems and actually get light to the ONT, they left the actiontech router in my house, so I took sometime to get to know it.
It's definitelly something I don't want or need in my network. It's not a bad router if you didn't have a business class product from before (actually it is pretty much the best you can get short of going to hardware firewall routers in the class of Zyxel, Watchguard and some high end, business class, Dells, Ciscos and Netgears).
Well... needless to say, I am running such a router (a Watchguard XTM-26W) and have security subscriptions with them to protect my network. In addition, it offers functionality and discrete access controls otherwise impossible with consumer grade products.
Now, back to the basic subject: I noticed something ominous and wonder if anyone else has noticed it too. I run my TV service through a machine that uses a Ceton 4-HD PCI-E tuner card with a multistream cablecard. It is installed on top of Windows 8 Pro, 64 bit and I use Windows Media Center as my core TV interface (guide and all). The machine is set to go to sleep by itself if no activity (and TV it's the only thing designed and intended to do and the only thong it does) is detected on the tuner for 5 minutes. This works flawlesly and always did while on Comcast service.
Now, the problem: you put the Actiontech router in the network (regardless of whether it's before or after the firewall gateway) and the machine fails to go to sleep. The router introduces some dort of chatter in the networkk that keeps the HDD active and the computer alive in perpetuity. Did anyone notice anything similar? What is your experience with this?
Obviously, I have no intent to keep the Actiontech router in the network under such conditions. For what I know, it is illegal in fact to put out products that send unsolicited traffic through one's network. Not to mention that it is a security risk. Might Verizon re-consider their insistence on deciding what routers to support and what don't or simply drop all support for all the routers since none is ever really needed? They only have the job to deliver a public IP to my equipment and I should be left alone otherwise (according to FCC). Which they otherwise fail to do by putting a piece of equipment that is theirs in the way and mandating that I use it, since 192.168.x.x is NOT a public IP, according to Internet Council.

LeoZ wrote:
Actiontec responded to my inquiry. See below.
It turns out it's another Verizon problem...
"Honestly no idea what would cause the chatter on the network to prevent sleep\stand-by to function.
Verizon would have to review the issue and see what in the code programming would cause this."
Stop the chatter. Put your Media Center hardware behind another firewall. Like I said mine is Linux IP-COP, which constanty drops these trash packets from the single STB I have on the MOCA COAX.
All from the Verizon network router. Almost like a broadcast storm!
This is a Motorola STB, My Cisco had two real IP addresses asigned by DHCP, and they did not do this. I turned in all my STB hardware and ordered a single STB, and was sent Motorola when I had been using Cisco.
wan-1 in into my Linux box and lan-1 is out of it. Then all my harware which includes Media Center PCs are gigabit switches, not exposed to this. I guess you could use another router and not a Linux PC. This STB is going back soon.
Time
Chain
Iface
Proto
Source
Src Port
MAC Address
Destination
Dst Port
22:53:42
RED DROP
wan-1
UDP
169.254.1.135
21302
00:25:f1:3d:d9:37
255.255.255.255
21302
22:53:31
RED DROP
wan-1
UDP
169.254.1.135
21302
00:25:f1:3d:d9:37
255.255.255.255
21302
22:53:22
RED DROP
wan-1
IGMP
192.168.1.1
00:7f:28:5c:07:1b
224.0.0.1
22:53:21
RED DROP
wan-1
UDP
169.254.1.135
21302
00:25:f1:3d:d9:37
255.255.255.255
21302
22:53:11
RED DROP
wan-1
UDP
169.254.1.135
21302
00:25:f1:3d:d9:37
255.255.255.255
21302
22:53:01
RED DROP
wan-1
UDP
169.254.1.135
21302
00:25:f1:3d:d9:37
255.255.255.255
21302
22:52:51
RED DROP
wan-1
UDP
169.254.1.135
21302
00:25:f1:3d:d9:37
255.255.255.255
21302
22:52:41
RED DROP
wan-1
UDP
169.254.1.135
21302
00:25:f1:3d:d9:37
255.255.255.255
21302
22:52:31
RED DROP
wan-1
UDP
169.254.1.135
21302
00:25:f1:3d:d9:37
255.255.255.255
21302
22:52:21
RED DROP
wan-1
UDP
169.254.1.135
21302
00:25:f1:3d:d9:37
255.255.255.255
21302
22:52:11
RED DROP
wan-1
UDP
169.254.1.135
21302
00:25:f1:3d:d9:37
255.255.255.255
21302
22:52:01
RED DROP
wan-1
UDP
169.254.1.135
21302
00:25:f1:3d:d9:37
255.255.255.255
21302
22:51:51
RED DROP
wan-1
UDP
169.254.1.135
21302
00:25:f1:3d:d9:37
255.255.255.255
21302
22:51:41
RED DROP
wan-1
UDP
169.254.1.135
21302
00:25:f1:3d:d9:37
255.255.255.255
21302
22:51:31
RED DROP
wan-1
UDP
169.254.1.135
21302
00:25:f1:3d:d9:37
255.255.255.255
21302
22:51:21
RED DROP
wan-1
UDP
169.254.1.135
21302
00:25:f1:3d:d9:37
255.255.255.255
21302
22:51:17
RED DROP
wan-1
IGMP
192.168.1.1
00:7f:28:5c:07:1b
224.0.0.1
22:51:11
RED DROP
wan-1
UDP
169.254.1.135
21302
00:25:f1:3d:d9:37
255.255.255.255
21302

Using the Apple Remote with Windows Media Center

Hello guys
First of all, I am Swiss, so excuse me for my bad English (grammar and stuff...)
So, my problem: I bought the Apple Remote and I think it is very awsome! But since Apple has removed Front Row in Lion, I don't really can use it anymore. So I'd tried to use it with Windows 7 Media Center. But it doesn't work correctly. Does anyone know, how to fix that?
Thank you

I had a Green Button remote provided with HP PC XP, Vista for Windows Media Center prior to getting Mac Pro.
Now in Lion, I have Hauppauge WinTV HVR-980 USB adapter (less than $100) including a remote that works in Lion for the Hauppauge TV app.
In Windows, the same remote works with all "Media Center" processes Music, Pictures, TV... instead of mouse/keyboard. If your TV service requires set top box, then you have to use its remote to change channels.
If ISP's internet Co-Ax also carries TV signal, you can get Cable Splitter (smple picture):
http://www.ebay.ca/itm/2-Way-TV-RF-Coaxial-Cable-Splitter-CATV-Signal-/320868649 227?pt=LH_DefaultDomain_0&hash=item4ab543090b
and feed 1 co-ax to USB TV adapter, the other to your Modem/Router.
The Hauppage USB was a good choice because it serves Mac & Windows.
Also, In Windows, if you have an XBox, it can be used as "Extender" for your A/V output.
http://windows.microsoft.com/en-US/windows7/Set-up-a-Windows-Media-Center-Extend er
Although this may not answer your question, it describes other options.

How do I stream my windows media center movies to my Wii U

I have windows 7 & I can`t stream my movies in windows media center to my WII U. I was able to connect the WII-U internet browser to my router for internet access. Can anyone help with this?

Hello,
The TechNet Sandbox forum is designed for users to try out the new forums functionality. Please be respectful of others, and do not expect replies to questions asked here.
As it's off-topic here, I am moving the question to the
Where is the forum for... forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book: Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Windows Media Center

I have a Pavilion p6724y PC with Windows 7 Home Premium 64Bit Service Pack 1 and I'm trying to view tv on my pc. The product code is QP720AA#ABA. When I go to the tv options internet tv is not listed. What do I need to watch tv on my pc????

Hi btunis,
I looked up the specs for your computer model and I don't see a TV tuner listed. Do you have one installed? Typically you'd need to hook up your computer TV tuner to either an antenna, cable or satellite/set top box in order to watch TV with Windows Media Center.
If you don't have a tuner and don't want to purchase one, you might still be able to watch some on-demand programming (not live TV) through Windows Media Center, depending on the region where you live. Check out this article from How-To Geek for information about setting up that functionality: Watch TV Programming Without a TV Tuner in Windows 7 Media Center. According to Microsoft this function is not available in all regions, probably due to licensing considerations.
You mentioned you're not seeing the Internet TV option -- if you live in the US it should be available for you, so make sure you have installed the latest updates for Windows Media Center.
I hope this helps!
Please click the thumbs up button to say "Thanks!"
Clicking "Accept as Solution" on a reply that solves your problem makes it easier for other people to find solutions.
I am an HP employee.

'Windows Media Center Receiver Service' stops and cannot be restarted

Hi,
I have had some issues with running my Hauppage TV Tuners (WinTV-HVR-2200) on a new Windows 7 Home Premium Installation.
After installing the TV Tuner card, drivers and WMC support software - I am able to configure my TV channels through Windows Media Centre and all is working fine. I can watch and record TV, so it all seems to be OK. It is only AFTER I restart my computer
that I get an error 'Viewing/Listening Device is currently not available' when trying to watch TV in WMC again.
I troubleshooted this issue and found that 'Windows Media Centre Receiver Service' was not running and when I tried to restart the service (via services.msc) it comes up with the following error:
"0x80070003: File path not found"
I have checked the Windows directory for ehrecvr.exe (the file that the service is linked to) and it is not corrupted or moved but I cannot re-link or restart the service.
I tried the following tasks to remedy the issue and none of them were successful:
Run SFC from cmd prompt - no issues were found
Changed the 'logon' details for the service from Network to Local
Changed the start type of the service from manual to automatic
Restored previous versions of windows - prior to windows updates
Re-install TV Tuner drivers and software
Updated to the latest drivers and software version of 'WinTV' (Hauppage TV Tuner Software)
Complete new installation of windows, including a format of the HDD - without installing additional third party software or anit-virus software
Re-seat the TV tuner in a new PCI slot
The only way that I am able to remedy the issue is if I disable and then re-enable WMC via 'optionalfeatures'. This then allows the service to start again, I can then configure my TV tuner in WMC but it still has issues after restarting the PC!
It would appear that by configuring the TV tuners in WMC, it causes a conflict in the service so that it cannot be restarted after it is stopped. Note: I can start/stop the service with the TV tuner cards installed on my PC - it is only when I configure
the TV channels in WMC that it then has issues.
I have had these TV tuners running without any issues for over 2 years; however I have upgraded the motherboard and CPU and this issue has only just started happening. I am at a loss of what to look at next...
Any help would be much appreciated!
Thanks

I shall suggest you :
1. uninstall WinTV software and reinstall WMC from the scratch.
2. Disable AV or any other internet security application during configuring WMC.
3. Update the TV Tuner card driver from Hauppage's website (only WMC driver and no other application)
Run Setup Again.
Open WMC > Tasks > Settings > General > Windows Media Center Setup > Run Setup Again
Does it help?
If the above doesn't help then try resetting WMC:-
Open Control Panel > Uninstall a Program > Turn Windows Features on or off > Scroll down to Media Features > Uncheck the box against Windows Media Center > Follow on screen instructions > Reboot > Again open Turn Windows Features on
or off under Control Panel > Scroll down to Media Features > Check the box against Windows Media Center.
Now reconfigure WMC again
S.Sengupta, Windows Entertainment and Connected Home MVP

Windows media center on the xbox with wrt110

I have my network set up, and it works really well. My only complaint is that I can not get a conection between my PC & xbox 360 so I can use windows media center. I can connect to the internet with the 360, but I can not get a connetion to my pc.
I am using a Wirless-G PCI Adapter with SpeedBooster & 2.4GHz 802.11g. Windows Vista, & WRT110.
How can I get this to work????????

To use Windows Media Center with your Xbox 360 console, you must have a PC running Windows Media Center. You have a compatible Windows Media Center PC if you have:
Windows XP Media Center Edition 2005
Windows Vista Home Premium
Windows Vista Ultimate
Note : Windows Media Center is not included with Windows XP Home, Windows XP Professional, Windows Vista Home Basic, or Windows Vista Business.
To set up Windows Media Center on your console:
   1. On your Windows Media Center PC, go to www.xbox.com/pcsetup to make sure your software is up-to-date.
   2. In the Xbox Dashboard, go to My Xbox and open Windows Media Center.
   3. Follow the instructions on the screen to finish Windows Media Center setup.
For more help, see www.microsoft.com/extender/help...

Recovering Downloads not in Windows Media Center

I download an item and when I try to open it, it goes to Windows Media Center and I can not find it their or any other downloads I have.
I am using Windows 7 and this did not happen in XP - Why?
How can I open my downloads without Windows Media Center?
Thanks for your help
Leon

Hi Leon,
If you are using Internet Explorer, when you click to download a file, choose Save when the download window appears. This will then open another window showing you where the file is going to be saved. If you are happy with this, click Ok. When the download has finished, click Open Folder to go straight to where your file is.
Hope this helps.
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Problem streaming from Windows Media Center to XBOX 360 with Airports?

Good evening,
I have been having an issue trying to stream windows media center from my windows 7 ultimate (64 bit if that helps) to my Xbox 360. My network setup is:
I have an airport extreme (G) that is plugged into my cable modem and my windows 7 machine. In my living room I have an airport express that extends my wireless signal through out the house but my xbox 360 is plugged into it via ethernet. I have a very fast internet connection that is stable but any transfer between my computer and xbox is very limited it seems. I was wonder if there is a way to get this to work better. When I lunch windows media center on the xbox it sees my pc and it shows the available files but when I try and move from one to the other nothing happens and eventually I get a can't connect error. Would I be better off not connecting via ethernet to the airport express and just buying a wireless adapter?
Thanks

You don't say how your devices are connected, whether through your Verizon router or some other way. If through, say, an Actiontec then you may be having bottleneck issues. I used to run all my devices through my Actiontec and got poor transfer speeds (it only handles 10/100). Moving everything on my network to a 10/100/1000 switch helped my transfer speeds to shoot right up ten fold. This way only the switch gets connected to my Actiontec and my network devices can still get out on the 'net if needed.
It's ok to try to reinvent the wheel, but just make sure it's round.

Window Media Center opens all my programs

Windows media center opens all my programs. It won't allow me to get on the net. Now I got this window that opens every time I try to do anything it is called View Downloads-Windows Internet Explorer. Would appreciate any help

Which computer? See the label on the bottom.
Please attach a picture of the message you get when you try "whatever." And explain what "whatever" is.
-Jerry

Windows Media Center TV Guide DATA servers at AKAMAI and MS are broken

For the love of ... can someone in here with actual direct contact to NETWORK Engineers @Microsoft, let them know that Windows Media Center is broken. in both my 3 year old working SSD drive with W7 Home Premium which has been working
up to a month ago or so, and the FRESH install on a new drive with ALL the updates, except those that failed, are both not getting TV Guide data , so recording can not be scheduled
I have been told by folks at Silicodust.com and at AVSforum and TheGreen Button forums , it has to do with regional DNS servers pointing to the wrong or broken AKAMAI servers , but even when given direct server name and IP addresses
and added those the the HOSTS file and then flushed the DNS settings withing Windows 7 , the error messages go away and you can see SOME files get downloaded but the DATA always fails
the paranoid little person in me keep telling me, maybe MS is giving up on WMC or they are doing it to force us to upgrade to 9. sure wish things would get fixed either way or just start charging us for WMC separetely for
it, so we can rely on tv guide data
thanks

You need a tv tuner card to watch movies, I use my cogeco hdtv as a tv tuner card, that works well with MC.
Microsoft dropped internet TV in sept 2012. Who cares about internet TV HDTV is much better for movies.

ITunes won't open after using Windows Media Center

Today I used Windows Media Center so I could play my music and videos through my X-Box. Now when I try to open iTunes it comes up with the message "The folder itunes is on a locked disk or you do not have write permission for this folder". Nothing has been changed, I did not lock anything, and now the folder automatically reverts itself to Read-Only. Please help

I also tried un and re-installing itunes but it did nothing

How can I convert the metadata tags on my mp4s to xml files so that they can be read in Windows Media Center?

I have a library with almost 3000 movies and TV shows that I have fully tagged. However, I have decided to start using Windows Media Center and it does its metadata tagging through XML files. I wanted to know if anyone could tell me if there was a way to extract the metadata from those mp4s and convert them to a format that WMC could read? Thanks!!!!

iTunes can make XML playlists so it might be all you need, I made a simple one file playlist and exported it from iTunes. The result is shown below. In principle I could delete the playlist and the entry from the library, as long as I don't delete the file, then later reimport the XML playlist file. I haven't tested this particular scenario, but I assume that iTunes will read all the properties as listed unless it can read some kind of tag from the file itself in which case the current value of the tag would take precedence.
What I don't know is what media center would make of this file, or what its files look like, however assuming they have a similar structure that can be decoded then it should be possible to read data from the iTunes library and write out a text file that will make sense to media centre.
Video Test.xml
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Major Version</key><integer>1</integer>
<key>Minor Version</key><integer>1</integer>
<key>Date</key><date>2013-09-26T23:30:26Z</date>
<key>Application Version</key><string>11.1</string>
<key>Features</key><integer>5</integer>
<key>Show Content Ratings</key><true/>
<key>Music Folder</key><string>file://localhost/E:/iTunes/iTunes%20Media/</string>
<key>Library Persistent ID</key><string>CCF046191585EA85</string>
<key>Tracks</key>
<dict>
<key>155170</key>
<dict>
<key>Track ID</key><integer>155170</integer>
<key>Name</key><string>Abbott & Costello: "Two Tens For A Five" & "Who's On First"</string>
<key>Artist</key><string>Abbott & Costello</string>
<key>Album Artist</key><string>Abbott & Costello</string>
<key>Album</key><string>Abbott & Costello: "Two Tens For A Five" & "Who's On First"</string>
<key>Genre</key><string>Comedy Clip</string>
<key>Kind</key><string>MPEG-4 video file</string>
<key>Size</key><integer>110483524</integer>
<key>Total Time</key><integer>532096</integer>
<key>Year</key><integer>1950</integer>
<key>Date Modified</key><date>2013-06-19T17:35:18Z</date>
<key>Date Added</key><date>2012-12-01T17:30:57Z</date>
<key>Bit Rate</key><integer>156</integer>
<key>Comments</key><string>www.dvdvideosoft.com</string>
<key>Artwork Count</key><integer>1</integer>
<key>Persistent ID</key><string>5AF2C490D1E065CD</string>
<key>Track Type</key><string>File</string>
<key>Has Video</key><true/>
<key>HD</key><false/>
<key>Video Width</key><integer>1136</integer>
<key>Video Height</key><integer>640</integer>
<key>Location</key><string>file://localhost/E:/iTunes/iTunes%20Media/Home%20Vide os/Abbott%20&%20Costello_%20_Two%20Tens%20for%20a%20Five_%20&%20_Who's%2 0on%20First_.mp4</string>
<key>File Folder Count</key><integer>3</integer>
<key>Library Folder Count</key><integer>1</integer>
</dict>
</dict>
<key>Playlists</key>
<array>
<dict>
<key>Name</key><string>Video Test</string>
<key>Playlist ID</key><integer>1930541</integer>
<key>Playlist Persistent ID</key><string>30BF2769C94F7F29</string>
<key>All Items</key><true/>
<key>Playlist Items</key>
<array>
<dict>
<key>Track ID</key><integer>155170</integer>
</dict>
</array>
</dict>
</array>
</dict>
</plist>
Such files are easier to interpret if opened with Notepad++.
tt2

Internet TV in Windows Media Center

Similar Messages

Maybe you are looking for