Internet windows with hype-v virtual machine on ndows 8.1

Hello to all the community technical preview
of Windows 10, use
windows 8.1, I installed
Windows 10 technical preiew in
the management console of
hyper-v in windows 10
install I am asked Which
connection to use, if
no connection or use of the
hyper-v, ch II to
hyper-v.
Once you install the system
from gaming operations,
the launch bar on the right where 'is
the internet connection, it tells
me undefinited network connection
and under limited with a yellow
exclamation point.
how do I connect to the
internet when you finish have installed
Windows 10 on a virtual machine
hyper-v?

You probably need to configure which NIC to use for your VM. Refer to this guide: http://technet.microsoft.com/en-us/library/gg610603.aspx to configure networking in a Hyper-V VM.

Similar Messages

Windows 8 Hyper-V - Virtual Machine Management Service failed to start the virtual machine

I have Hyper-v running on Dell Precision T3600 with Windows 8 OS. I am trying to start a VM (called Windows8VM) to install Windows 8 in the hyper-v virtual machine, but I keep getting the following message:
"Windows8VM" failed to start.
Failed to start the virtual machine "Windows8VM" because one of the Hyper-V components is not running.
"Windows8VM" failed to start. (Virtual machine ID D670D3BB-9AE2-0453D-9191-EA6EFC242A9C)
The Virtual Machine Management Services failed to start the virtual machine "Windows8VM" because one of the Hyper-V components is not running.
I have turned the hyper-v feature on in the "Turn Windows feature on or off. The BIOS has virtualization enable. Help!!! driving me nuts for a week now.
Nick :(

Okay, I turned off hyper-v, went to bios and enabled Intel TXT(LT-SX) Configuration. Made sure that both Virtualization and VT for Direct I/0 are on. Next, I turned on Hyper-V and I create a brand new Virtual Machine call Windows8 and had
the DVD point to Windows8 ISO file on hard drive. When I clicked on start, it stayed in the Starting status mode for about 5 minutes. Then of course it failed. I looked at the Hyper-V-VMMS log and here is what it output:
Log Name: Microsoft-Windows-Hyper-V-VMMS/Admin
1) Error: The virtualization infrastructure driver (VID) is not running.
2) Info: Found a certificate for server authentication. Remote access to virtual machines is now possible.
3) Info: Successfully started the Virtual Machine migration connection manager.
4) Info: Virtual Machine Management service is started successfully.
5) Info: The WMI provider 'VmmsWmiInstanceAndMethodProvider' has started.
6) Info: The WMI provider 'VmmsWmiEventProvider' has started.
7) Info: The WMI provider 'VmmsWmiInstanceAndMethodProvider' has started.
8) Info: The WMI provider 'VmmsWmiEventProvider' has started.
9) Info: The Integration Services Setup Disk image was successfully updated.
10) Error: The virtual machine bus is not running.
11) Error: 'Virtual Machine Bus' driver required by the Virtual Machine Management service is not installed or is disabled. Check your settings or try reinstalling the Hyper-V role.
12) Error: 'Storage Virtualization Service Provider' driver required by the Virtual Machine Management service is not installed or is disabled. Check your settings or try reinstalling the Hyper-V role.
13) Error: The Virtual Machine Management Service failed to start the virtual machine 'Window8' because one of the Hyper-V components is not running (Virtual machine ID 2B393AF4-7B7E-4243-805B-23C09D20F4FB).
14) Error: 'Window8' failed to start. (Virtual machine ID 2B393AF4-7B7E-4243-805B-23C09D20F4FB)
Nick

Create Hyper-V Virtual Machines with Windows PowerShell searching on hostname

Dear,
I’m a starter with PowerShell scripting an I’m looking for a script to create Hyper-V Virtual Machines with Windows PowerShell. The idea behind the script is that when I run the script its first searching for the hostname. I’m migrating 24 locations and each
location have a different hostname like xxx-SRV001. The script needs to use the first 3 signs from the hostname in this case “xxx” and create 2 VM's with below info:
Virtual Machine 1 2048MB
Virtual Machine 2 4096MB
Location D:\VM\
I can create VM's with Powershell into Hyper-V so only a script to first searching for the first 3 characters of the hostname is enough.
Example:
It's the intention that when the script runs it's looking for the hostname. As example we have hostname 000-SRV001
If the script see the first 3 characters of the hostname, in this case 000 he need to create 2 VMs with name xxx-SRV002 and xxx-SRV004
I think it must be something with
$hostname = "Get-WmiObject -computername $Machine Win32_Computersystem"
But then when i'm asking for $hostname he must give me back the hostname and if the hostname is 1 of the 24 locations then he need to create 2 vm's in Hyper-V with above info.
Can you help me or do you have a script for this?

Juste use :
$vram = 1GB*$vRam
You not need the "
Do you have any error with the creation of the VM?
# Variables
$VMName = Import-Csv "C:\HyperV\input.csv"
$VHD = 40GB
$VMLOC = "C:\HyperV"
$vSwitch = "External"
$ISO = "C:\ISO\WinServer2012R2.iso"
$LocationCode = $env:COMPUTERNAME.Split("-")[0]
# Create VM Folder
MD $VMLOC -ErrorAction SilentlyContinue
Foreach ($VM in $VMNames)
$Name = $VM.name
[int64]$vRam = $vm.vram
$vram = 1GB*$vRam
$VMName = $LocationCode+$Name
# Create Virtual Machine
New-VM -Name $VMName -Path $VMLOC -MemoryStartupBytes $vRam -NewVHDPath "$VMLOC\$VMName\Virtual Harddisks\$VMName.vhdx" -NewVHDSizeBytes $VHD -SwitchName $vSwitch
# Configure Virtual Machines
Set-VMDvdDrive -VMName $VMName -Path $ISO
Start-VM $VMName
# Configure Virtual Machines
Set-VMDvdDrive -VMName $VMName -Path $ISO
Start-VM $VMName
Error message
New-VM : '003' failed to modify device 'Memory'. (Virtual machine ID 8F5F32D7-F1A0-4A68-8B01-CA6661869A1E)
Invalid startup memory amount assigned for '003'. The minimum amount of memory you can assign to this virtual machine is '32' MB. (Virtual machine ID 8F5F32D7-F1A0-4A68-8B01-CA6661869A1E)
A parameter that is not valid was passed to the operation.
At line:20 char:5
+ New-VM -Name $VMName -Path $VMLOC -MemoryStartupBytes $vRam -NewVHDPath "$VM ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (Microsoft.HyperV.PowerShell.VMTask:VMTask) [New-VM], VirtualizationOperationFailedException
+ FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.NewVMCommand
Set-VMDvdDrive : A parameter is invalid. Hyper-V was unable to find a virtual machine with name 003.
At line:23 char:5
+ Set-VMDvdDrive -VMName $VMName -Path $ISO
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (003:String) [Set-VMDvdDrive], VirtualizationInvalidArgumentException
+ FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.SetVMDvdDriveCommand
Start-VM : A parameter is invalid. Hyper-V was unable to find a virtual machine with name 003.
At line:24 char:5
+ Start-VM $VMName
+ ~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (003:String) [Start-VM], VirtualizationInvalidArgumentException
+ FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.StartVMCommand
Set-VMDvdDrive : A parameter is invalid. Hyper-V was unable to find a virtual machine with name 003.
At line:27 char:5
+ Set-VMDvdDrive -VMName $VMName -Path $ISO
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (003:String) [Set-VMDvdDrive], VirtualizationInvalidArgumentException
+ FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.SetVMDvdDriveCommand
Start-VM : A parameter is invalid. Hyper-V was unable to find a virtual machine with name 003.
At line:28 char:5
+ Start-VM $VMName
+ ~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (003:String) [Start-VM], VirtualizationInvalidArgumentException
+ FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.StartVMCommand
New-VM : '003' failed to modify device 'Memory'. (Virtual machine ID C0FC835E-36D4-462E-BD21-69A75A808E2F)
Invalid startup memory amount assigned for '003'. The minimum amount of memory you can assign to this virtual machine is '32' MB. (Virtual machine ID C0FC835E-36D4-462E-BD21-69A75A808E2F)
A parameter that is not valid was passed to the operation.
At line:20 char:5
+ New-VM -Name $VMName -Path $VMLOC -MemoryStartupBytes $vRam -NewVHDPath "$VM ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (Microsoft.HyperV.PowerShell.VMTask:VMTask) [New-VM], VirtualizationOperationFailedException
+ FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.NewVMCommand
Set-VMDvdDrive : A parameter is invalid. Hyper-V was unable to find a virtual machine with name 003.
At line:23 char:5
+ Set-VMDvdDrive -VMName $VMName -Path $ISO
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (003:String) [Set-VMDvdDrive], VirtualizationInvalidArgumentException
+ FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.SetVMDvdDriveCommand
Start-VM : A parameter is invalid. Hyper-V was unable to find a virtual machine with name 003.
At line:24 char:5
+ Start-VM $VMName
+ ~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (003:String) [Start-VM], VirtualizationInvalidArgumentException
+ FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.StartVMCommand
Set-VMDvdDrive : A parameter is invalid. Hyper-V was unable to find a virtual machine with name 003.
At line:27 char:5
+ Set-VMDvdDrive -VMName $VMName -Path $ISO
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (003:String) [Set-VMDvdDrive], VirtualizationInvalidArgumentException
+ FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.SetVMDvdDriveCommand
Start-VM : A parameter is invalid. Hyper-V was unable to find a virtual machine with name 003.
At line:28 char:5
+ Start-VM $VMName
+ ~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (003:String) [Start-VM], VirtualizationInvalidArgumentException
+ FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.StartVMCommand

Windows 10 Technical Preview - There is NO "Hyper-v Virtual Machine Management" service???

hi all,
There's no such Windows Topic as "WTP Virtualization", so I post this thread here, a somewhat "VIRTULIZATION" related.
I installed WTP (not server) x64 enterprise 9879, and added "Hyper-v Management" feature (management only, without Hyper-v core) in Control Panel. Then I found that there was no "Hyper-v
Virtual Machine Management" in Services panel, and there was no such file "c:\windows\system32\vmms.exe". Therefore I cannot connect to Windows Server 2012 R2 Hyper-v through WTP Hyper-v Manager.
I confirm the reason is what I state above. Firewall rules are properly configured on both Hyper-v server and WTP. I also used hvxxxx.wsf to configre anondcom to be "allow". When
I connect WS 2012 R2 through WTP, Hyper-v manager on WTP says "Please confirm VMMS server is running".
Is it a bug, or lack of implementation, or restriction of preview edition?
Any suggestion is appreciated! Thanks!

Okay, I turned off hyper-v, went to bios and enabled Intel TXT(LT-SX) Configuration. Made sure that both Virtualization and VT for Direct I/0 are on. Next, I turned on Hyper-V and I create a brand new Virtual Machine call Windows8 and had
the DVD point to Windows8 ISO file on hard drive. When I clicked on start, it stayed in the Starting status mode for about 5 minutes. Then of course it failed. I looked at the Hyper-V-VMMS log and here is what it output:
Log Name: Microsoft-Windows-Hyper-V-VMMS/Admin
1) Error: The virtualization infrastructure driver (VID) is not running.
2) Info: Found a certificate for server authentication. Remote access to virtual machines is now possible.
3) Info: Successfully started the Virtual Machine migration connection manager.
4) Info: Virtual Machine Management service is started successfully.
5) Info: The WMI provider 'VmmsWmiInstanceAndMethodProvider' has started.
6) Info: The WMI provider 'VmmsWmiEventProvider' has started.
7) Info: The WMI provider 'VmmsWmiInstanceAndMethodProvider' has started.
8) Info: The WMI provider 'VmmsWmiEventProvider' has started.
9) Info: The Integration Services Setup Disk image was successfully updated.
10) Error: The virtual machine bus is not running.
11) Error: 'Virtual Machine Bus' driver required by the Virtual Machine Management service is not installed or is disabled. Check your settings or try reinstalling the Hyper-V role.
12) Error: 'Storage Virtualization Service Provider' driver required by the Virtual Machine Management service is not installed or is disabled. Check your settings or try reinstalling the Hyper-V role.
13) Error: The Virtual Machine Management Service failed to start the virtual machine 'Window8' because one of the Hyper-V components is not running (Virtual machine ID 2B393AF4-7B7E-4243-805B-23C09D20F4FB).
14) Error: 'Window8' failed to start. (Virtual machine ID 2B393AF4-7B7E-4243-805B-23C09D20F4FB)
Nick

Hyper-V Virtual machine disappeared

Hello,
I am running Windows Server 2008 R2 SP1. I have the Hyper-V role installed with to virtual machines. I rebooted yesterday after windows updates loaded and now one of my virtual machine have disappeared. I have run through hours of technet
forums trying to find the answer and have come up empty.
I checked ProgramData\Microsoft\Windows|Hyper-V\Virtual Machines and the symbolic link is gone. I tried to recreat it using the mklink command, but every time I recreate the symbolic link to the .xml it comes back as a link to a file folder.
I checked the acl on the virtual machine .xml on my D: drive and the GUID SID is missing. I also tried to add it back via the iacls command but it doesn't seem to exist.
After all that, I decided to recreate the entire virtual machine, but now I can't create virtual machines. I get teh following error:
"Failed to create external configuration store at 'folder path': A required privilege is not held by the client. (Virtual machine ID 0x80070522)"
After that error I opend azman.msc and verified that the initalstore.xml has the administrators group in it.
I do not know what else I can do from here. Any help would be appreciated.

Hi Jumar2,
This will help others who are fighting with similar issues.
Thanks for your sharing .
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Hyper V Virtual Machine Creation

While we try creating a new virtual machine for our windows phone application, we are facing the following error.
-Failed to add device 'Virtual Hard disk
-Hyper V virtual machine management service account does not have permission to open attachment.
ERROR: General access denied error(0x80070005)

Unblock whatever it is that you downloaded.
Check that your antivirus software is set with the proper exclusions.
I don't recall anyone reporting this error before - as the installer for the phone emulator generally takes care of the machine creation and permissions.
I can only guess that you are attempting to duplicate the phone emulator VM. If so, use Export and Import.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.

Hyper-V virtual machines disappearing

Running W10 Enterprise TP with no security software, nothing fancy.
Twice now my Virtual Machine running locally in Hyper-V Manger have disappeared after a reboot. They are still running in the background by their VHDs being in use, but I can't see them to do anything.
Last time this happened, I had to remove Hyper-V, reboot, re-add Hyper-V, and the VM appeared. However, there was something wrong with the VM so I deleted it and started over.
Any ideas?
My idea of a party is a virtualization server and a room of TechNet DVDs

@ThrashZone, Thank you but this is an issue that occurs after it has already been up and running.
@h_vHE I'm running Windows 10. Interesting: Everything has disappeared from C:\Users\Public\Documents\Hyper-V\. However, the virtual machine "IMAGEBASE" appears in C:\ProgramData\Microsoft\Windows\Hyper-V\. Here's a dir /b /s:
C:\ProgramData\Microsoft\Windows\Hyper-V\data.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\Groups
C:\ProgramData\Microsoft\Windows\Hyper-V\Groups Cache
C:\ProgramData\Microsoft\Windows\Hyper-V\IMAGEBASE
C:\ProgramData\Microsoft\Windows\Hyper-V\Persistent Tasks
C:\ProgramData\Microsoft\Windows\Hyper-V\Planned Snapshots
C:\ProgramData\Microsoft\Windows\Hyper-V\Planned Snapshots Cache
C:\ProgramData\Microsoft\Windows\Hyper-V\Planned Virtual Machines
C:\ProgramData\Microsoft\Windows\Hyper-V\Planned Virtual Machines Cache
C:\ProgramData\Microsoft\Windows\Hyper-V\Resource Types
C:\ProgramData\Microsoft\Windows\Hyper-V\Snapshot Groups
C:\ProgramData\Microsoft\Windows\Hyper-V\Snapshot Groups Cache
C:\ProgramData\Microsoft\Windows\Hyper-V\Snapshots
C:\ProgramData\Microsoft\Windows\Hyper-V\Snapshots Cache
C:\ProgramData\Microsoft\Windows\Hyper-V\UndoLog Configuration
C:\ProgramData\Microsoft\Windows\Hyper-V\UndoLog Configuration Cache
C:\ProgramData\Microsoft\Windows\Hyper-V\Virtual Machines
C:\ProgramData\Microsoft\Windows\Hyper-V\Virtual Machines Cache
C:\ProgramData\Microsoft\Windows\Hyper-V\Groups\groupregistry.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\Groups Cache\groupregistry.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\IMAGEBASE\Virtual Hard Disks
C:\ProgramData\Microsoft\Windows\Hyper-V\IMAGEBASE\Virtual Machines
C:\ProgramData\Microsoft\Windows\Hyper-V\IMAGEBASE\Virtual Hard Disks\IMAGEBASE.vhdx
C:\ProgramData\Microsoft\Windows\Hyper-V\IMAGEBASE\Virtual Machines\DC334ED4-B8DF-4EFB-A6F0-10C508E7BA54
C:\ProgramData\Microsoft\Windows\Hyper-V\IMAGEBASE\Virtual Machines\DC334ED4-B8DF-4EFB-A6F0-10C508E7BA54.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\IMAGEBASE\Virtual Machines\DC334ED4-B8DF-4EFB-A6F0-10C508E7BA54.VMRS
C:\ProgramData\Microsoft\Windows\Hyper-V\Resource Types\06FF76FA-2D58-4BAF-9F8D-455773824F37.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\Resource Types\118C3BE5-0D31-4804-85F0-5C6074ABEA8F.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\Resource Types\146C56A0-3546-469B-9737-FCBCF82428F4.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\Resource Types\19839BFF-6F04-4B24-B4B5-1AFCCBE729DE.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\Resource Types\353B3BE8-310C-4CF4-839E-4E1B14616136.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\Resource Types\4764334E-E001-4176-82EE-5594EC9B530E.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\Resource Types\4EA4F71F-16E6-4250-99A8-A2315332CC64.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\Resource Types\6A45335D-4C3A-44B7-B61F-C9808BBDF8ED.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\Resource Types\70BB60D2-A9D3-46AA-B654-3DE53004B4F8.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\Resource Types\72027ECE-E44A-446E-AF2B-8D8C4B8A2279.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\Resource Types\78AA0C27-B2BD-45BA-83D1-5F2A8C4C6656.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\Resource Types\7951A5ED-8DC5-42D7-AA8C-9F14C54CEB84.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\Resource Types\B637F347-6A0E-4DEC-AF52-BD70CB80A21D.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\Resource Types\BDE5D4D6-E450-46D2-B925-976CA3E989B4.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\Resource Types\D45268DA-37C5-44DA-B827-B0C55CCB3BDC.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\Resource Types\D92D268E-9AA8-49DD-8C7D-821CEFB5F597.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\Resource Types\DACDCF3F-6F67-4EB8-A4D0-5D93B48A2468.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\Resource Types\ED28BF6C-B698-4513-B8F4-7BDD01E006A2.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\Resource Types\F6293891-F32F-4930-B2DB-1A8961D9CB75.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\Snapshot Groups\groupregistry.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\Snapshot Groups Cache\groupregistry.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\Virtual Machines Cache\DC334ED4-B8DF-4EFB-A6F0-10C508E7BA54
C:\ProgramData\Microsoft\Windows\Hyper-V\Virtual Machines Cache\DC334ED4-B8DF-4EFB-A6F0-10C508E7BA54.vmcx
My idea of a party is a virtualization server and a room of TechNet DVDs

Hyper V virtual machine randomly loses network connectivity

I have an extremely odd issue happening on one of my Hyper-V virtual machines. For no apparent reason and completely sporadically my virtual machine will lose all network connectivity. It is a linux Vyatta firewall image. Digging through
the logs shows nothing at all when the machine actually goes offline, but when the machine starts back up I just get a Warning stating the network driver on my virtual machine loaded but has a different version from the server. Server Version 3.2 Client
version 0.2
I've ran the integrated services setup disk and nothing has fixed this. When the VM loses connectivity it is for no apparent reason, sometimes at 1am sometimes at noon, just happens. The only solution is to reboot the VM to bring it back online.
Has anyone else seen this or know of a fix for it? Its starting to slowly drive me insane!
Hyper V Server - Windows Server 2008 R2 - Hyper V Manager Version 6.1.7601.17514
VM - Linux Vyatta Core 6.3

I tried downloading new integrated services disk setup for linux, but Vyatta wouldn't work with it so I was kind of stuck there. And not sure where you are talking about changing NIC to legacy at. I did disable some TCP chimpney settings as
per an article I found, but not sure if it will fix it or not. Sometimes the machine will stay on for a month before losing network connection and sometimes it comes in spurts and happens like 3-4 times over a couple days. Its really odd

Modify the headless options of the BIOS on a Hyper-V Virtual Machine

Hi everyone,
I am attempting to do something which is (surprisingly) complex using a Hyper-V virtual machine. Using VMware Workstation I have been able to boot from the network using VMware autodeploy. This loads ESXi 5.5 as the operating system. This
works great, but I would like to try to accomplish he same feat using Hyper-V, and I've succeeded. This creates is a nested ESXi 5.5 host.
The process was long and painful, but I have gotten to the point that I am able to successfully boot a Hyper-V virtual machine off the network (legacy network card as the boot device) then load the OS. The only problem is that in order to get it to
boot I need to hit shift + o during the ESXi boot startup, and enter the following line:
ignoreHeadless=TRUE
The problem is that I can't do this manually every time. To understand how to fix this, I first needed to understand what exactly "ignoreHeadless=TRUE" was doing. My understanding is that this has to do with the display, specifically:
"Some systems which have a video display device can be configured to report themselves as headless via the configuration, usually in the system BIOS."
I believe this is my issue, by default a Windows Hyper-V virtual machine reports itself as headless, therefore you need to ignore this configuration on startup or ESXi thinks there is a display error.
My question is, can I fix this from the virtual machine side? Can I modify the virtual machine so that it does NOT report itself as headless?

Hi,
The Hyper-V is the full virtualization technology, and it must installed on bare-metal computer, personal experience, if you are using the WDS with Hyper-V environment to
deploy the Windows system, the performance will lower than the physical computer and you must choose the corresponding method if you have the different environment.
More information:
Windows Deployment Services Overview
http://technet.microsoft.com/en-us/library/hh831764.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Will I be able to run Windows XP on a virtual machine (such as VirtualBox) in Mountain Lion?

Hello. Will I be able to run Windows XP on a virtual machine (such as VirtualBox) in Mountain Lion? Currently, I have a Late-2009 MacBook with Snow Leopard, and I am planning on installing VirtualBox and Windows XP soon, then I'm planning on upgrading to Mountain Lion afterwards. Thanks.

Yes.

Error Creating VM on 2011 iMac - The Hyper-V Virtual Machine Management service encountered an unexpected error: The remote procedure call failed. (0x800706BE).

I am running Hyper-V in Windows 8.1 on a late 2011 27 inch iMac. Whenever I try to create a virtual machine I get the error below and Windows warns that it will restart in 1 minute. I tried a clean install of Windows, but my PC still crashes ever
time I try to create a VM. I was able to successfully use Hyper-V in prior versions of Windows on this same PC. Any clue as to what is going on? A driver? Windows 8.1? Mac Hardware related?
I see the following two entries in event viewer but have no other clue as to what is happening:
Log Name:      Microsoft-Windows-Hyper-V-VMMS-Admin
Source:        Microsoft-Windows-Hyper-V-VMMS
Date:          1/10/2014 10:48:46 AM
Event ID:      16000
Task Category: None
Level:         Error
Keywords:
User:          SYSTEM
Computer:      Charles-PC.CHARLESPOOL.local
Description:
The Hyper-V Virtual Machine Management service encountered an unexpected error: The remote procedure call failed. (0x800706BE).
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-Hyper-V-VMMS" Guid="{6066F867-7CA1-4418-85FD-36E3F9C0600C}" />
    <EventID>16000</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2014-01-10T15:48:46.770451300Z" />
    <EventRecordID>58</EventRecordID>
    <Correlation />
    <Execution ProcessID="2488" ThreadID="8704" />
    <Channel>Microsoft-Windows-Hyper-V-VMMS-Admin</Channel>
    <Computer>Charles-PC.CHARLESPOOL.local</Computer>
    <Security UserID="S-1-5-18" />
</System>
<UserData>
    <VmlEventLog xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://www.microsoft.com/Windows/Virtualization/Events">
      <ErrorMessage>%%2147944126</ErrorMessage>
      <ErrorCode>0x800706BE</ErrorCode>
    </VmlEventLog>
</UserData>
</Event>
Log Name:      Microsoft-Windows-Hyper-V-VMMS-Admin
Source:        Microsoft-Windows-Hyper-V-VMMS
Date:          1/10/2014 10:48:46 AM
Event ID:      16010
Task Category: None
Level:         Error
Keywords:
User:          SYSTEM
Computer:      Charles-PC.CHARLESPOOL.local
Description:
The operation failed.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-Hyper-V-VMMS" Guid="{6066f867-7ca1-4418-85fd-36e3f9c0600c}" />
    <EventID>16010</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2014-01-10T15:48:46.773497100Z" />
    <EventRecordID>59</EventRecordID>
    <Correlation />
    <Execution ProcessID="2488" ThreadID="8704" />
    <Channel>Microsoft-Windows-Hyper-V-VMMS-Admin</Channel>
    <Computer>Charles-PC.CHARLESPOOL.local</Computer>
    <Security UserID="S-1-5-18" />
</System>
<ProcessingErrorData>
    <ErrorCode>15005</ErrorCode>
    <DataItemName>Parameter0</DataItemName>
    <EventPayload>
    </EventPayload>
</ProcessingErrorData>
</Event>

Hi CharlesPool,
I am assuming that the win8.1 is in-place updated from win8 .
Maybe you need to check the state of hypervisorlaunchtype .
If it is off , please run command " bcdedit /set hypervisorlaunchtype auto "
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Backing up Windows Server 2012 R2 Virtual Machine

When I try to back my Windows Server 2012 R2 Virtual machine up to a NAS, using the Windows Server Utility I get the following errors:
There was a failure in preparing the backup image in one of the volumes in the backup set.
Detailed error: The process can not access the file because another process has locked a portion of the file.
When viewing the errors in Event viewer I get the following error:
The backup operation that started at '‎2014‎-‎03‎-‎12T10:23:08.681735200Z' has failed with following error code '0x807800C5' (There was a failure in preparing the backup image of one of the volumes in the backup set.). Please review the event details for
a solution, and then rerun the backup operation once the issue is resolved.
Any help will be appreciated.
Regards
Louis

Have a look, check whether the solution is working for you.
http://answers.microsoft.com/en-us/windows/forum/windows_8-performance/windows-8-backup-error-code-0x807800c5/0ec7fea0-bb4d-44d2-9381-c364ef2c1f6c
Regards,
Rafic
If you found this post helpful, please give it a "Helpful" vote.
If it answered your question, remember to mark it as an "Answer".
This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion in a test environment before implementing!

Hyper-v virtual machine management in status stopping

Hello,
I had a problem with one vm showing status backing up.
I read on TechNet that restarting the hyper-v virtual machine management service would solve the problem.
I have tried to shutdown the service but it now says status stopping...
How long time does it take to shutdown the service? Is there anything I can do to hurry it up?
ps. I have production vm running on the host that I can't take down...
Regards
Roger

Hi Roger,
I also tested in my lab to disable that service forcibly ,then I found that it will leads the VMs to unexpected shutdown .
Based on this ,it seems that restarting the host is necessary .
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to find out whether a program is running in Hyper-V virtual machine or not?

If I want to make a program which only running in Hyper-V virtual machine, how can I find out whether
the program is running in Hyper-V virtual machine or not?

https://gallery.technet.microsoft.com/scriptcenter/Determine-if-a-computer-is-cdd20473
http://social.technet.microsoft.com/wiki/contents/articles/942.hyper-v-how-to-detect-if-a-computer-is-a-vm-using-script.aspx
http://www.grouppolicy.biz/2014/01/how-to-target-group-policy-to-virtual-computers/
Mike Crowley | MVP
My Blog --
Baseline Technologies

Hyper v virtual Machines should have installed integrated services or not ?

Hi
In my prodcution found hyper v virtual machines have no integrated services was installed should we installed on production servers is any impact if we didnt installed them.
if it should installed then what is the best approch to installed.
Thanks

You posted in the Group Policy forum...
That's a good question for the Hyper-V forum:
http://social.technet.microsoft.com/Forums/en-US/home?forum=winserverhyperv
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Internet windows with hype-v virtual machine on ndows 8.1

Similar Messages

Maybe you are looking for