Internet with macbook pro

I'm purchasing a macbook pro and have internet capability on my existing G5. What do I need to purchase in order to use the internet simultaneously with both computers? TIA

Ok, so I was having the same problems as everyone has been complaining about, from low signal strength being close to the router, unstable connection, the whole bit since upgrading to 10.5 and 10.5.1. I have a Core 2 Duo 2.33Ghz MBP, did a clean install of Leopard, the whole bit. Did notice with Tiger that my signal strength didn't seem as strong as before the "N" enabler install, but everything still worked. Since the Leopard install it has been a mess. What it seems to be is the "N" drat WiFi that is screwing everything up. I got into the configuration of my Linksys 300N router and switched to "G" only and it has worked flawlessly ever since. My signal strength is back to full even upstairs where I would lose a bar or two before. Much happier now. Will try turning "N" back on when the next update comes out but otherwise I am staying with this setup. If you haven't tried it yet, I suggest that you do. It's real easy to do and doesn't require but less than 2 minutes. Good luck!

Similar Messages

Slow internet with macbook pro retina (late2013)

The longer I'm having my new Macbook Pro Retina, the slower it gets concerning the internet.
There is sometimes no speed at all... I have to wait about half a minute to start the loading of for example an ebay site.
As I use my old Macbook Pro (late 2009) right beside the new one, I have the perfect comparison. The old one is fast as ever. Even my Iphone is much faster in our home WLAN. The new one just works and works on heavy loading site after site.
Shouldn't it be the opposite way?
Has someone the same problems?
Any solutions?
Greetings from Germany,
baldost

1. Power cycle
     Power off the router. Unplug it from the wall. Wait a while.
     Plug it back to the wall. Power the router on. Wait until all the lights are lit properly.
     It will take a   while.
     Restart the computer.
     Start up in Safe Mode
     http://support.apple.com/kb/PH11212
2 Empty Caches
    Safari > Preference > Advanced
    Checkmark the box for "Show Develop menu in menu bar".
    Develop menu will appear in the Safari menu bar.
    Click Develop and select "Empty Caches" from the dropdown.

Slow internet with Macbook Pro

My desktop connects fine in downloading and browsing, but my Mac BookPro is sluggish to the point where I have to refresh just to get it to do anything. Anyone have ideas on why this is? Or simple solutions?

I think this is related to the MBP and possibly 10.5.2. I have just tested my connection speeds on my APEBS on my iMac 10.4..11 and PowerBook G4 10.5.1 and all had reasonable good connection speeds (using speedtest.net). I'm Jupiter, FL and I tested to Jacksonville, FL, Portland, ME, Colorado Springs, CO and San Jose, CA. The download/upload speeds on the iMac were 2836/386; 2801/401; 2577/362; 2474/398. The download/upload speeds on the PowerBook were 1827/365; 1326/406; 1557/319; 872/399.
Compare those to the MBP 10.5.2 2111/45; 1124/46; 930/125; 533/7
You can see a real problem with the upload speed (which is why I keep getting the "Safari can't find server" message).
Now compare these speeds to these when I take out the APEBS and hook the MBP directly to the DSL modem (Westel 6100). 1147/382; 6134/413; 5005/388; 4388/498
Vast improvements in both the download and the upload speeds.
I'm now using my iMac because the MBP is not usable with the internet with the APEBS Wi-Fi (slower than the old dial-up)

I have samsung corby gts3653 mobile and need to connect internet to mac through it but it doesn't have wifi and pcsuite for mac and how could i able to connect it through gprs? GPRS is active in mobile but unable to link it with macbook pro(using lion os)

i have samsung corby gts3653 mobile and need to connect internet to mac through it but it doesn't have wifi and pcsuite for mac and how could i able to connect it, through gprs? GPRS is active in mobile but unable to link it with macbook pro(using lion os) can any one reply.

Until the MacBook Air was released and supported in 10.5, the Mac did not consider USB to be a valid Networking Protocol. So set the Mac with USB solutions aside.
To connect computer-to-computer, you typically need to be using an Ethernet crossover cable. Assigning the same address to two Ethernet devices is never the solution -- it gives a Network Conflict, just as you said.
If your Windows box has some mechanism for Sharing its WiFi connection over Ethernet, you would have to follow its rules. Whether that means Manually assigning an Ethernet Address in the same range or the PC will provide the Address, I do not know.
Best success may be running an Ethernet cable to your Wired/Wireless Base Station, or using a "gaming adapter" (Ethernet-to-Wireless no drivers required) connected to the Mac's Ethernet port to give it WiFi access. What is your Base Station {Cable, DSL, FIOS, Other} ? Ethernet cables can be up to 100 meters (an American Football Field). Often the Base Station can be moved closer for more convenience.

Airport not maintaining internet connection on my D-link router with Macbook Pro 5.5 with Snow leopard

Airport keeps throwing me out of internet connection on my D-link router with Macbook Pro 5.5 with Snow leopard. Pls if anyone has a solution to this then let me know

I'm using my PC notebook because connecting with my iMac is IMPOSSIBLE!!! If I get connected at all, it's worse than dial-up speed.
We are wireless via a D-Link DIR-625 (new) -- but was having some problems before with a netgear. Problem much worse now. My computers are not the primary computers. My sister gets that coin toss. She is a PC user. I share with her using WPA2. When the iMac "wakes" the signal bands are strong, but when I go to a page I lose all signal strength. And several times a day I get a message indicating an error joining the network -- arghhhhh -- HELP!
Is the problem with D-Link or Mac? Thanks for any help.

Time Capsule works with MacBook Pro (Mavericks) but not with IOS devices? recent problem starting March 1, 2015.

I have a Time Capsule version 7.7.3 (model A1470) which has worked fine for almost 2 years with all devices, Apple and otherwise. As of beginning of this month, March 2015 - no longer works with a new IPAD mini 3 and 6-month old iPhone 6 (both updated as of last night) BUT still works fine with MacBook Pro (Mavericks 10.9.5) and Epson printer XP-600.
On both IOS devices Airport Utility shows the Time Capsule and shows green light connection to internet, but never does the connection. The little status circle just keeps going round and never shows the Wifi rainbow symbol. both devices work fine on other Wifi's. Airport Utility on iPhone actually connects enough to check on Airport base station's firmware 7.7.3 and says it is up to date! but sadly stays on LTE.
Have tried resetting, replugging etc...
Also, tried checking on updates. Nothing shows in Airport Utility. When I try to go to see past updates ~/Library/Application Support/Apple/AirPort/Firmware to see if updated, there is no Airport in the Apple folder?
A mystery...

Reset the TC to factory and redo the setup. see details below.
Here is the typical list of things you should try.. and if this doesn't help post again.
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Setup the TC again.
ie Start from a factory reset. No files are lost on the hard disk doing this.
Then redo the setup from the computer or perhaps it is better using iOS on the phone or ipad currently having issues.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg TCgen5 and TCwifi for basestation and wireless respectively.
Even better if the issue is more wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round. For iOS the fixed channels particularly for 2.4ghz has helped.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place makes for poor networking. If the TC is main router it will not be an issue. This is a problem for a TC in bridge mode.
If this is of no help.. what modem do you have? What function other than modem does it have.. ie none or router??
How is the TC connected into the network? What function does it have? Router or bridge for example.
Post a few screenshots of the setup.

I have a problem with macbook pro OS 10.5.8 and cannot play youtube anymore, before Yes

i have a problem with macbook pro mac os 10.5.8 and cannot play youtube but before ther is no problem abou this. now there is warning sign to install adobe flash player, but when i install adobe it said cannot be compatible, and I went to the apple store, they sid need to upgrade the system to mac IOS 10.6 and i dont want to spend much... somebody to help me this

Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mavericks if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading from Snow Leopard to Lion or Mavericks
To upgrade to Mavericks you must have Snow Leopard 10.6.8, Lion, or Mountain Lion installed. Purchase and download Mavericks (Free) from the App Store. Sign in using your Apple ID. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mavericks- System Requirements
       Macs that can be upgraded to OS X Mavericks
         1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
             Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
         7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
         See App Compatibility Table — RoaringApps.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
This, Adobe Flash Player 12.0.0.70, is the current version of Flash. It should work with Snow Leopard or later.

Poster printing with MacBook Pro

How can one print posters with MacBook Pro? For example, 16 A4 pages to tape together.

I found system preferences but once I get there I
can't find the internet and network.
wait. in the System Preferences window, the third row down should be "Internet & Network"... the second icon from the left should be "Network".
are you saying you don't see the Network icon?
I clicked show
all and it doesn't add anything.
correct that's just a "return to the main menu"-type thingy - i.e. if you click on "Appearance" from System Preferences window, and then decide that you want to go back to the System Preferences main window, you'd just click on "Show All"
What am I missing?
I'm brand new to OS X.
well, i don't think you need Virtual PC... but i think we should first figure out why you're not able to get to the network setup section of system prefs....
cheers

Best modem to use with Macbook pro

I have a new Macbook Pro which won't stay connected to the internet. Apple don' t have the answer. I have noticed it is stable in other locations so I suspect it is not compatible issue with my wireless modem. Can anyone suggest a modem which is stable with Macbook Pro?

First: On your Macbook Pro, Make sure that your Wireless is actually turned on.
Once that is confirmed:
You need to connect to the router via an Ethernet cable connected from your computer (Your Macbook Pro has an ethernet port on the left side) to the router.
Find out the IP address of your router (Usually 192.168.1.1) But you should be able to find this within Settings->Network
Type that IP Address into the address bar of your Safari web browser.
Go through the router's settings and make sure that your Wireless is actually turned on.
If all else fails, Just reset the router to factory settings. This usually works because Wireless is typically turned on by default.
Unfortuately, Cable ISPs and DSL ISPs usually won't provide any support for home networking (using your own router) unless you buy the services from them (which is a huge waste of money).
Good luck.

Can't connect to internet via MacBook Pro to Airport Extreme

I can't connect to internet via MacBook Pro to Airport Extreme. I reset AE and modem (power down and back up again). Some computers on my home network will connect fine and others won't. The ones that won't don't populate the DNS server or the Search Domains. AE shows up on all the machines. I have one computer also connect to AE via ethernet and it has the same symptoms. Why do some Macs connect and others don't. Even when I get them to connect when I shutdown or put in sleep mode over night I lose the internet connection and have to start all over. Very frustrating.

Regrettably no replies. I have struggled with this for days with no success and I have given up on the Airport Extreme. I have found several other Forum posts with very similar problems and no one seems to have a solution to this. It seems other wireless routers work better than the Apple product. I was able to get my old Linksys wireless router reset and it is set up and working well. The Linksys router does populate the DNS servers and domains where as the AE does not. Apple engineers should look into this. If I am mistaken and there is a fix for this someone please let me know, otherwise my AE will probably appear on Ebay very soon.

Apple TV 7.0.2 Airplay with MacBook PRO OS X 10.10.1 is not working.

Apple TV 7.0.2 Airplay with MacBook PRO OS X 10.10.1 is not working, I have validated all settings and rebooted all systems (per Apple recommendation) and still not working what seems to be the issue?

You need to upgrade your OS. It's your responsibility to verify if your equipment meets the system requirements, not the Apple Store.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.

Cinema Display (clear) with DVI/ADC box doesn't work with MacBook Pro

Cinema Display (clear) with DVI/ADC box doesn't work with MacBook Pro when plugged in with a dvi to mini dvi cable. Any ideas what to do to make it work? I lugged the 23" 2500 miles into the wilderness and I need help

Okay, here's an update: the DVI to ADC adapter does work with the Apple displays that I have tried, but it won't work with the Formac. I have tried multiple time to contact them, but to no avail... they don't even respond to threats of posting my opinion of them, which is this:
DON'T BUY ANYTHING FROM FORMAC! They make quality products, but their customer service is a big time joke! They won't take care of you.

How can I restore data from my iPhone after sync with macbook pro?

I accidentally syncronized my Iphone with MacBook Pro on iTunes and lost all data from my phone (calendar, contacts, photos, etc.). Is there a way to recover that information? Thank you!

Welcome to Apple Support Communities
You cannot. However, you can solve this problem by setting the iPhone as a new device and upgrading iOS in Settings -> Software Update.
After upgrading iOS, open Settings -> General -> Reset -> Erase All Content and Settings. Finally, Setup Assistant will let you restore the backup.

External hard drive compatible with macbook pro 10.5.8

external hard drive compatible with macbook pro 10.5.8, i need a hard drive that will work with 10.5.8 to back everything up before upgrading to 10.6. a hard drive that is compatable with 10.5.8 has been impossible to find, a hard drive that works with both opperating systems is what i am looking for, any information that can help is appreciated

You can buy just about any USB2.0 hard drive and use it with your MacBook Pro. Many older external drives come pre-partitioned and formatted FAT32 for use on Windows. Your Mac can use that file system as well, but it has limitations on file sizes. You can always re-partition your external drive and re-format it as HFS+ (MacOS Extended Journaled) then your old Mac OS version and your new one should both be able to access it just fine. One thing to keep in mind is that many older OSes don't really handle drives larger than 2TB well, so you would probably want to try to keep your external drive to something smaller than 2TB...

Does Adobe Photoshop Elements work with MacBook Pro with Retina display?

Does Adobe Photoshop Elements work with MacBook Pro with Retina display, please?
Have searched Adobe website for answer - most recent is 2013 answer, saying no.
Contradicted by a staff ember who only referred to Photoshop, not Elements.
Reason I need it is that iPhoto does not support very high resolution photos - which I have now scanned onto my MacBook and do not want to re-scan!! After 90 minutes at my local Genius bar (lovely folk, very conscientiously searching for an answer...), re-scanning was their final piece of advice.
Help, please...

Hello Smis,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand you are having issues with your HP Monitor on your MAC. I am providing you with an HP Support document: Updating a Monitor Driver, where it states under the sub-heading Using HP monitors on a Mac "HP monitors are not supported in a Mac environment. However, newer Macs use graphics with VESA modes and can display to most HP LCD monitors. To do this, connect the monitor to the Mac while the Mac is off, and then turn on the MAC. The monitor should operate at 60Hz. The INF and software for the HP monitor are for Microsoft Windows and cannot be run in a standard MAC OS environment."
This being said all I can advise is that you check to see that the monitor is set to operat at 60Hz and contact Apple for assistance if that does not get your monitor displaying correctly.
I hope I have answered your question to your satisfaction. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Internet with macbook pro

Similar Messages

Maybe you are looking for