Internet won't work when connection goes through WRT54GS wireless router

I get the page not found error when I open the internet when my connection goes through my WRT54GS router. It works fine when it is plugged into the wall, although I have to disable/enable the local area connection in the network connection to reset the IP address.
Any suggestions?

Who is your ISP. You can configure your Router manually.
If your Internet Service Providor is Cable follow this link
If your Internet Service Providor is DSL follow this link

Similar Messages

Ichat won't work when connected to links WRT54GS ROUTER

does anybody know why ichat wont work behind linkswireless router (WRT54GS) i tried opening the port 5190 and still doesnt work on G5 running tiger. Pls help????

Hi Joel,
Many LinkSys set uppages look the same.
This one is for the WRT54g (no S at the end)
http://portforward.com/english/routers/port_forwarding/Linksys/WRT54G/iChat.htm
In the Adminstration option you should find UPnP which is an On or Off setting.
Try that.
Also check that the modem and the Linksys are not both doing DHCP as this creates subnets which ichat also doe not like
Ralph

I want to buy an hp m1536 laserjet for my ipad printing, I believe the printer is not wireless but has sprint. Is the print job going through my wireless router and does that router need to support AirPrint.

I want to buy an hp m1536 laserjet for my ipad printing, I believe the printer is not wireless but has sprint. Is the print job going through my wireless router and does that router need to support AirPrint.

The following model is airprint compatible, is this the one you have?
HP LaserJet Pro M1536dnf MFP
If not the "dnf MFP" model, then no.
The router needs to support the Bonjour protocol. If not, the airprint won't work.

Dial up connection sharing via WRT54G wireless router

Can someone help me out? Here's my issue
I have an XP based desktop computer that connects to the internet via a dial up 56K modem. I would like to share the connection with my new XP vista laptop using the wireless adapter on the laptop. I have a Linsys WRT54G wireless router. The desktop pc with the connection I want to share is connected to the router via ehternet cable. How do I go about configuring the laptop wireless & the router to allow for this. I assigned a static ip 192.168.1.253 to my desktop from the router (192.168.1.100). When I enable ICS it changes the ethernet to 192.168.0.1.

Your connection download speed should be about the same 8-9Mbits, whether you are wired directly to your modem, or wired through your router .
You said you reset the router to factory defaults and that it was working better. Did the download connection speed through the router go to 8-9Mbits/sec ? If it is still 5-6 Mbits, then this suggests that something in your modem-router system is not setup quite right. If you still have this slow speed problem, then please post the following info:
1) Your ISP (internet service provider)
2) Your modem model number and version.
3) Open your router's setup pages, and go to the Setup tab. List all your settings in the "Basic Setup - Internet Setup" section.
4) List the operating system (Windows XP, Win 98SE, etc.) on the wired computer that you are using for the test.
After you list this info, hopefully someone in this community will be able to guide you to optimizing your settings, given your ISP and equipment.

My Internet won't work unless I'm close to the router

I've got the iPod touch, 5th generation with up up to date software.
Every time I try to connect to the Internet, I have to be within one meter from my router, and that's the only time I can connect to the Internet.
I've got a family member with an iPhone 5 and they're connect to the Internet router and we've got the same IP address and information for the router.
So I'm slightly confused on why my Internet wont work properly.

- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Airport Express Stopped Working when I switched to FIOS wireless router

AirPort Express worked for several years with Linksys router. When I upgraded to FIOS service, it came with a new wireless router. I have two Macs (iMac-G5 and MacBook 2.0 GHz) and work-supplied Lenovo T-61. Network is set up with WPA2 with 23-character-long pass phrase. AE (802.11B/G) will not connect to network. I can reset it to factory defaults and Airport Utility will find it. I then change the wireless interface on iMac to match the default network and I can configure the AE. When I apply the configuration changes, the AE reboots and never comes on-line. It stays in either the blinking orange pattern or in the alternate between orange and green pattern.
I have tried setting the AE up manually as well as "automatically" and have not had any success. I was a network engineer for over 10 years, so I have lots of experience configuring IP routing and switching. The log files on the FIOS router do not show any attempts by the AE to connect to my LAN.
Does anyone have any suggestions?

Suspecting a problem with the security key, I began to experiment with different security settings. My first attempt was to change the security setting on the Verizon router from WPA2 to WPA. I did not change the key. When I did, I was able to configure the AirPort Express and then get the Airport Express to reboot and establish wireless communications with the FIOS router. Again, the only change I made was to switch the encryption type on the FIOS router from WPA2 to WPA. I have no idea why the AirPort Express would not properly join the network when the main wireless access point (the FIOS router) was using WPA2 security.

Booted off Broadband connection with new WRT54g Wireless Router

I recently moved to a new place with Comcast Broadband. My boyfriend and I both want to access the Internet so we got a Linksys Wireless Router to connect our computers to the broadband connection. It's not going very well, however, because almost daily we are booted off the Internet. I called Comcast and they said the Modem is working fine, which just leaves the Router. Does anyone have any suggestions on what might be causing this?
Thanks,
Patricia

How did Comcast determined that your modem is working fine? When you are connected directly to modem , do you have the same problem? because if you do, then it would have the same problem with the router, no matter what you do with the router. Try isolating problem by checking if the connection would drop when you are connected directly to modem.
If through isolation process you found out that modem is stable, there might be a problem with router itself or that the router isn't properly configured, is your computer wired or wireless? how about your boyfriend's?
" I can do all things through Christ which strengthens me. "

Internet won't work when VPN on

If my VPN is on I cannot use web based apps including Safari. I get the message that the iPad is not connected to the internet when it clearly is. I need the VPN to access email. I use Any Connect for my VPN. Email works fine when VPN on, but audio streaming apps, Yahoo Mail app, and Safari do not. Used to with iOS 7. Not since upgrading to iOS 8.

Could be the frequency of your router and bluetooth that are conflicting with each other.
If you can get into your router's settings, try changing the channels from 7 which is usually the default channel to 6, 5, or even 9 and see if you're still have conficts.

My iPhone 4S 3G Internet won't work when Bluetooth is on.

When I turn on my Bluetooth and connect it to my i'mwatch I lose the 3G Internet connection on my phone. I cannot access my Internet my email or any app using my Internet connection. I have to turn off my Bluetooth and restart my phone. Why does my Internet connection go away when my Bluetooth is on and connected. Is there a way to fix this so I can have Bluetooth on AND keep my Internet connection. I have an iPhone 4S with sprint.

Could be the frequency of your router and bluetooth that are conflicting with each other.
If you can get into your router's settings, try changing the channels from 7 which is usually the default channel to 6, 5, or even 9 and see if you're still have conficts.

HT4199 Hi I have a iPad which works fine on my wireless router and a iPad mini which won't work all the time on my wireless router it's work for a minutes then stops, it won't work on my apps the loading icon just goes round, but the iPad works fine all t

I've even tried only having the iPad mini on the router but that's not even worked. Safari works but the apps are the worst and its what I use most.

Hi Friends,
I found the solution for this problem (because I faced it too): go to Settings>>General>>Reset>>Reset Internet Settings (the third option in IOS 6).
Five minutes later my iPhone 4S works fine again.
If the issue persists, forget the wifi connection, then sign in again.
Hope it helps

Internet stopped working when connected to Cisco VPN

Hi,
I have configured IPSec (Ikev1) Remote access VPN in ASA 5520, VPN is connecting properly and i am able to access all internal resources but Internet is not working when connected to VPN. I have investigated on this and found problem with the default gateway, i am getting ddefault gateway duringVPN connection. I am surprised in ASA there is no default gateway configured for remote VPN IP pool then how remote clients can get default gateway.
I am describing my problem in below given image Please help me to shootout it.
Thanks in advanve.

Hi,
The top configurations is specified to Tunnel All traffic as you can see from the "split-tunnel-policy tunneall". In this case the Split Tunnel ACL is ignored to my understanding.
The bottom configuration is specified to use Split Tunnel but I cant see the ACL specified there.
To my understanding you should be seeing routes on your actual computers routing table for the networks that are reached through the VPN.
On a Windows machine you can open the command prompt and issue the command "route print" to view the routes
Here is an example when I am connected to one Split Tunnel VPN (click to enlarge)
To my understanding there is no default gateway in the virtual VPN interface configurations as the host forward all the traffic that needs to be tunneled to the actual virtual interface and from there on in it heads through the VPN Connection.
Here is an example what the VPN Client Statistics/Route Details tells me
Both Internet and the remote network/host behind the VPN connection can be reached.
What does the above window show for you in your VPN Client when active?
- Jouni

Internet won't work with wireless and ethernet connected at the same time. Airport extreme

Why can I not connect ot the internet when both the ethernet cable is connected. The connection is fine when only on wireless and fine when only the ethernet cable is connected but won't work when the cable is plugged in.
any ideas?

opps forgot to set router as bridge turned off NAT and problems solved

HT1363 hi, i use an old but great black photo/video ipod. Suddendly it won't recharge, when connected it emits several clicks and an ipod icon appears together with the apple support email address. I have tried to restore and reset but it won't work. Any

hi i use an old black 60G photo/video ipod. Suddenly it won't recharge, when connected to the pc it emits several cicks in serires and then it shows at intervals a low battery signs and another sign, a sad faced ipod icon with the apple support email address. Any clues and to how I can rescue it? Thank you very much. Alf1962

I am having essentialy the same problem, but my iPod came from a PC and is now on a PC. The person who gave me the iPod didn't give me the wall adapter piece, so I bought a "Griffin" brand that was said to be compatible with this model. When I first plugged it into the wall, the Apple appeared with a bar underneath as though it was loading the new software. When the bar got to the end, the "plug into the wall" icon reappeared, but when I plug it in to the wall now, that icon is the only thing that shows, even after resetting and trying to run diagnostics.
When I doc the iPod on a charger I have or plug the USB into my computer and "reset" it, a battery with a charge icon appears, but there is no "motion" in the icon so it doesn't appear to be charging. The screen eventually goes back to the apple then to the "plug it into the wall" icon. HELP!!! Is is possible the wall adapters isn't the right one? Should I be charging through a firewire cable instead (which I also don't have...)?
Message was edited by: shenards
Message was edited by: shenards

So, about a week ago my macbook pro started having lots of issues: wifi connectivity, slow performance, sound issues, spotlight wasn't working. After going through the issues with apple support, they decided the best course of action was to erase it...

So, about a week ago my macbook pro started having lots of issues: wifi connectivity, slow performance, sound issues, spotlight wasn't working. After going through the issues with apple support, they decided the best course of action was to erase the hard drive and do a reinstall. Since I have a recent backup this seemed like a good enough option. They were kind enough to send me a copy of the snow leopard disk to do the install since we couldn't get it to complete through the disk utility. Not sure why, since it says we are fully connected, it just never completed.
Anyway, so now that you have the background here is the new issue. The macbook pro keeps spitting out the disk I'm trying to install from. Disk utility and using the 'Startup Disk' function from the apple menu doesn't read the disk.
Can anyone suggest a solution to this vexing problem?
Thanks in advance.

Jeremy.Laurin,
have you tried agb76’s approach here?

My nano works when connected to a computer but won't work when unconnected. The battery is full.

My nano won't work when it is not connected to a computer. It won't even reset. If I pull it into my computer it will work and it shows that the battery is full. What might be the problem?

Then that sounds to be the Apple ID that owns this Mac, the OS and any preinstalled apps. Did that Apple ID set the Mac up when new?

Internet won't work when connection goes through WRT54GS wireless router

Similar Messages

Maybe you are looking for