Internet works everywhere in the house, except in the tv room!

For some strange reason, anywhere in my house, I get amazing internet connection. A full four bars. But, as soon as I walk into my TV room, which is literally right beside my router, I still get four bars, but my internet becomes slow. On a good day, it will still load up sites like Facebook or Digg, but it takes a long time. Sometimes, it just doesn't load them at all. But, heres a twist!!!!!!!! If I log into XP via Bootcamp, in the TV room the internet is fast.
Any suggestions?

Jetpacks are not home router replacement devices. They are not designed to cover more than a few feet away from where they are located. If you are using a Jetpack as a normal home router replacement device then you are using the Jetpack outside of its design specs.
VZW has many other products and solutions that would be better suited to perform the duties of covering your entire home from one device. For example the 4G LTE router, Internet Connected or a USB modem with a CradlePoint router. Not only will these devices actually cover the space you are concerned about but they will perform better when left online 24x7 like a normal home router is expected to be.
The problem isn't the Jetpack, its how you intend to use it.

Similar Messages

HT1430 dueing the update ios7 7.0.2 ipad can not open. They show the message is correct the itunes. I back the house and correct the itunes and get the recover the ipad but unsucessful. now the ipad is unavaible to start. pls help

dueing the update IOS 7 7.0.2, ipad show the message is contact the itunes, when I back the house, ipad contact the PC and itunes for recovery the ipad but unsuccessful. Now ipad is not start.please help

I hope this helps. If I understood your question properly, it is the same or similar problem many, including myself, had with the IOS7 update. I'll relay my situation & what I did to rectify it. I have the iPad2 & MACBook Pro. I have an iPhone 5 but won't be updating it.
IF YOU HAVEN'T YET UPDATED YOUR iPAD TO IOS 7... DON'T. NOT UNTIL YOU'RE CERTAIN YOU HAVE BACKED UP YOUR iPAD, AT LEAST. BE ABSOLUTELY CERTAIN YOU HAVE BACKED UP YOUR DEVICE.
FIRST: BACK UP YOUR IPAD, & ALL YOUR DEVICES.
NEXT: CHECK FOR UPDATES ON ALL DEVICES.
I updated my iPad while away from my main wifi connection because using my main wifi for the last update subsequently interfered with my connection thereafter. New problem now.
1.) Once I updated (was it successful/unsuccessful?) Because...
My iPad showed a large apple with a line underneath; then it illustrated & said, "connect to iTunes." i can't accessa thing. (Huh? Doesn't Apple know people TRAVEL FAR away from their MAC with their iPads? I WAS RUDELY LEFT WITH AN INOP DEVICE on the road.)
2.) On my MAC: I checked for all updates, & ensured my iTunes was updated.
3.) I followed thre following instructions from a website (http://www.digitaltrends.com/mobile/ios-7-problems/) I found when researching this common problem. iPhone... iPad... same instructions...
...connect to iTunes and try DFU (Device Firmware Upgrade) mode.
Potential solution:
Hold down the Sleep/Wake button to turn your iPhone off.
Open iTunes on your computer and connect your iPhone.
Hold down the Sleep/Wake button and the Home button together for ten seconds, and then release the Sleep/Wake button.
Continue to hold down the Home button until you see a pop-up on iTunes stating that “iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes.”
Your iPhone screen should be blank, if you see a logo or message on it then you are not in DFU (Device Firmware Upgrade) mode.
Select your iPhone in the left hand column of iTunes and select Summary then Restore.
You may need to install the iOS 7 update again.
------------------ THIS WORKED.
I followed the instruction & so far so good. DO NOT DISCONNECT YOUR iPAD! It will continue to prompt you through SEVERAL items, including the re-installation of one of your previous back-ups. It appears the back-up was successful & that everything is now back to normal.
Except that now I'm stuck with the juvenile appearance of this new IOS. My Notepad no longer looks like a notepad. Why don't I just type on DOS? My APPLE easthetice have disappeared. If I can, I will revert to IOS 6.
Read more: http://www.digitaltrends.com/mobile/ios-7-problems/#ixzz2g7Y2neAU
Follow us: @digitaltrends on Twitter | digitaltrendsftw on Facebook

Error while mapping the BAPI exception to the Fault Messge

Hi
I have a scenario SOAP to BAPI ...
when i try test the scenarion from Altova XML SPY for BAPI exception ... i am getting the following error....
When i tried to map the BAPI exception to the Fault Message its giving me the error...
com.sap.aii.af.ra.ms.api.DeliveryException: com.sap.aii.af.ra.ms.api.MessagingException: Could not parse XMBMessage due to Unexpected length of element <sap:Error><sap:ApplicationFaultMessageNamespace> =

Hi,
Fault messages can be used for inbound proxies....for BAPI also it can be used i am also not sure....How are you tracking that the data is getting posted into the SAP table with the help of BAPI?
Thanks
Arijit

My parents just bought an ipad. Their apple ID is correct in all the places except in the iTunes and App Stores settings. It won't let you click on the Apple ID to change it. What should they do?

My parents just bought an ipad. Their apple ID is correct in all the places except in the iTunes and App Stores settings. It won't let you click on the Apple ID to change it. What should they do?

Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

The back and forward arrow, the house icon and the refresh icon are missing. How do I find them, thanks

The back and forward arrows are missing, as are the house icon and the refresh icon. All that goes in that area. Can you tell me how to find them? Thanks

This article will help you restore them - [[Back and forward or other toolbar items are missing]]

ATT Microcell works with one iPhone in the house but not the other

A client of mine got new two new iPhone 6 phones when he and his wife signed up for ATT service. What ATT failed to tell him is that they don't have a tower in the area where he lives and he gets no cell reception from his house, and has one bar while standing in his driveway. Extremely frustrated, they went back and complained. ATT's answer (of course) was to then sell them a Microcell device. Oddly the Microcell they received is a small black box with only a single ethernet port in back. It is not like the white 'Y' designs you see online. The whole thing seems like a money making scam to me but that's beside the point. Anyway, I went over and hooked up the Microcell to their Xfinity router from Comcast, then logged into their ATT account and initiated the activation process. It took about 30 minutes to complete all four stages which included downloading a software update. Once the Microcell was activated, one of the Iphones had full bars. However, the other iphone still only had a single bar. Why would one iPhone have full bars and the other still have only a single bar? 1. Tried turning off both phones and turning them back on. Problem persisted.2. Tried moving the phone with a single bar coverage right next to the Microcell. Problem persisted. 3. Tried turning off just the iphone that had full bars. Problem persisted.4. Tried resetting the Microcell device. Problem persisted.5. Tried disconnecting both phones from the wireless internet network for the house. Problem persisted. Really confused on this could be happening with just one of the two iphones in the house.

AT&T has not completely updated the MicroCell page and links. The new MicroCell is the black DPH-154 model which is replacing the white "Y" shaped models and you describe it. Functionally, they are currently the same. The only difference is that Cisco/AT&T has done away with the external antenna port and the Computer port. It's not a money making scam.
You can have multiple phones connected to the MicroCell at any one time without issues. One of the iPhones I assume has the phone number that is associated with the AT&T mobile account. That should be the phone number used to register the MicroCell with (what we call the primary number). The other iPhone, which I will assume is on the same account, needs to be added to the Approved Users List. Once you add the "problem" phone, turn off the phone and then turn it back on so that it can add the MicroCell to its cellular neighborhood.

My apps work everywhere but my house

My apps cannot be accessed from my home for some reason, everytime though I go somewhere and connect to the wifi, they work, but will not load from home. I know my internet is good, everything works on my windows phone and computer, so I do not understand.

Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Wireless internet work on MAC's but not on the PC's

I just bought the time capsule recently, set it up and all that good stuff. I have two MAC's connecting wirelessly with on and off speeds. I also have two PCs with wireless card. Before time capsule i was running on a Linksys WRT54G and the wireless worked fine on both MAC's and the PC's. The problem i am having is that the internet on the PC's are always down. I would have to go through the diagnostics test or making the internet come back to life with renewing the IP's or clicking "Repair". When it does work it works fine, then couple hours later the internet dies. It is never connected. Where as on the MAC's it is perfectly fine anytime. Before on the Linksys i could have my PC's up 24/7 and the internet wouldn't die. Any suggestions or tips? anything please. THANK YOU!
running from the DSL PPPoe directly to the time capsule through WAN port.
Connection : ALWAYS ON.
Wireless Security : WPA/WPA2
Channel: 1(Automatic)
Radio Mode : 802.11m (802.11b/g compatible)

I have had a couple of occaisions where the WiFi on my Macbook Air got in a knot. It seemed to come good after power cycling the router.
You could try removing your network from the computer and then adding it back again.
System Preferences > Network > select WiFi > click Advanced > select the WiFi tab > click the name of your network > press the minus button to remove it. Then add the network back again.
Hope this helps - Mark

My ipad2 only connects to wifi when next to the router. Three more iPads in the house connects to the wifi fine.what do I do?

My ipad 2 openly connects to wifi if next to the router. All other iPhones and iPads in the house are working great.what do I do to fix this?

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at
http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are drooping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.hmL
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Signal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Macbook pro logs out of network when left idle and then I need to turn off the router and all computers in the house to reset the system.

I have a macbook pro running 10.6.8. Since I got it over a year ago it will disconnect from the network when left idle and then not be able to reconnect. All computers in the house have to be shut down and the router turned off in order to reconnect again.   My son just updated his macbook using my os disc and now his computer is doing the same thing. What can we do?

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Also
If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.

If I purchase a second Airport, will it strengthen the signal from the router in one part of the house , so that the printer, in a basement can see it?

I have a router in my upstairs, main floor of the house.   My iMac connects easily to the router, but the printer does not. If I purchase a second Airport, will it strengthen the signal from the router so the printer will connect wirelessly to the network?
I had the printer connected to the iMac by USB , but when I upgraded the iMac to Maverick OS10 my scanner no longer worked, the more I fussed with it the less productive it was.   Now the printer no longer is available at all.   The computer does not see it.
The message when I turn them on is that the USB is not compatible.    I unplugged the USB cable, and would like to connect wirelessly.
Thank you for any hints
Carol Havens

If you have an Apple router now providing your wireless network, you could add another....like an AirPort Express, for example....to "extend" the signal wirelessly and provide more coverage.
This is always a bit tricky, because the AirPort Express would need to be located where it can receive a strong signal from the main AirPort wireless router.
For example, if you need more wireless signal in a bedroom at the end of the house, you would locate the AirPort Express about half way between the main AirPort router and the bedroom.
On a side note......only the print function will work when you connect an All-in-One device to the USB port on an AirPort, so connect the All-in-One using wireless for full functionality.

How to obtain the house bank in the customer invoice posted by FB70?

Hi All,
Could anyone tell me how to obtain a certain house bank in the customer invoice posted by FB70?
I've made a test. I've filled an house bank in master data of the customer (company data). When I've posted the invoice by FB70, i've expected finding it in the item.... instead it wasn't there...
Cuold anyone help me?
Thanks
gandalf

Dear,
The House bank will not reflect in customer invoice, it is used in outgoing or incoming payments.

Just bought my first i Pad and can't connect to wi fi in the house even when the password is correct. Now what??

Just bought my first iPad and can't seem to connect even in the house. Have verified the netgear password but it won't let me connect..any ideas?

What type of encryption are you using with your wireless network -WEP or WPA?
If your wireless router supports both which it should unless it is quite old and you are using WEP, try switching to WPA which is much more secure than WEP which is important if you have a Windows PC or any Windows based device connected to your network.
In addition, when was the last time you checked Netgear's website to see if there is a firmware update available for your wireless router model that you haven't installed?

HT5973 Maps has errors in it. It shows my subdivision with all of the houses, but shows the streets and street names in the middle of a field about a mile down the road. How do I report this to get it fixed.

How do I get errors in Maps corrected? It shows the subdivision I live in, The streets and houses are in the correct place, however it does not name the streets. It then shows the correct street names in the middle of a field about a mile down the street from my subdivision.

Similar issues here.
I purchased five movies for download and having nothing but problems getting them downloaded. I keep receiving error messages and the download stops and I have to restart it, just to get another minute worth of download with each restart. Now Apple has my money and I have nothing.

I do not get the back button icon on my browser. It's not just 9.01 it's all of the browser except for the first. Please Advise

If I go to a web page and I want to go back to the previous page there is no icon to do it with. It use to be in the top left corner of the browser. The way I do it now is click on the left mouse button and there's a back there. Please advise

Right-click an empty section of the Tab Strip and select '''Customize''' and the Customize Toolbar window opens then '''find and drag the BACK button''' from the Customize Toolbar window''' into the toolbar where you want it to appear''' then click '''Done'''.
read for more info :
[https://support.mozilla.com/en-US/kb/Back%20and%20forward%20or%20other%20toolbar%20items%20are%20missing Back and forward or other toolbar items are missing]
[https://support.mozilla.com/en-US/kb/Back%20and%20forward%20or%20other%20toolbar%20items%20are%20missing#w_restoring-the-default-toolbar-set Restoring the default toolbar set]
[https://support.mozilla.com/en-US/kb/how-do-i-customize-toolbars?redirectlocale=en-US&redirectslug=How+to+customize+the+toolbar How do I customize the toolbars?]
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

Internet works everywhere in the house, except in the tv room!

Similar Messages

Maybe you are looking for