Internet

Right i really need this problem sorting out... connecting to the internet on my Macbook (wireless is not an option) i have 2 approaches.
1. Connect directly to the internet via ethernet straight to my Windows PC. But how do i activate Internet sharing so i can do this?
2. Use my Network router, the setup would have to be like this INTERNET - DSL router - Windows PC - Router Macbook. How can i do this?
Any other ideas will also be appreciated.
Thanks
Jimbob 456

ok. im not the best at this but i try and help. i think the 2nd option is the best option. internet to router(they usually have 4 ports) one port goes to the pc and then another port goes to the macbook. you use ethernet cable(cat 5 or cat 6, don't think it really matters though), but why isn't wireless an option. all you would have to do is to replace your wired router with a wired/wireless router. you could still have the wired cable to the pc, but then the macbook could be wireless. hope i could help.
troy

Similar Messages

Since I installed FF4 each time I start up internet FF doesn't open and gives the report that it cannot find the proxyserver.

Already I have changed the settings to no proxy, but it doesn't work. Each time I want to open internet again I get the same report and I have to change the setting to no proxy again! Also I noticed that FF has changed the proxy adjustment himself to 'manual proxy configuration' where it has introduced HTTP-proxy 127.0.0.1 and port 63030 himself! How can I change this for good?! So that I don't have to change the setting each time I want to open internet.

Thank you for this information. I am going to get rid of my i Phone5c because of this policy of Apple! Maybe they need sued to stop this policy!

Sprint says Q10 can not access internet/data in Chas/Hunt WV area

So I upgraded to a new Q10 and spent a few hours loading and configuing all my emails, etc.
Driving to work this morning, I noted that there was no emails received after I left my house (wifi-enabled). Tried to open the Browser and received the error stating there was no connection to the internet. Wasted most of the workday fiddling with the settings --- no joy. So on the way home I stop at the Sprint store. I walk in and showed the guy my phone and said, "I need some help with this."
He immediately said, "No internet or data?" Dayum. He went on to say that BB 3G/4G v10 won't work in this area and that BB was aware of the problem. Something about Sprint sharing towers with Intelos and the phones won't recognize something. Over my head, but all other smartphones work here...just the BB Q10 won't.
Really bites --- when I'm on WiFi the thing rocks and is everything I need in a smartphone. So much better than my daughters iPhone 5...except for this.

Not sure if the same but
my brother is unable to get Data on his Sprint iphone unless its on LTE and most where he is is not LTE enabled.
It still makes calls and recieves calls but no data.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

How do I use my Time Capsule with hotel wired internet

How do I use my Time Capsule as a wireless router on my hotel free internet ethernet cable?

It may not be possible..
If they use a web access page, then there is no way you can set the TC to authenticate.. you must use the computer to authenticate and then use the computer to bridge to the TC for wireless clients to access.
Look up instructions on using ICS (internet connection sharing) in the Mac.
eg for 10.6.8 http://support.apple.com/kb/PH6589
eg http://support.apple.com/kb/PH10740
Of course if there is no login then you could just use it.. but I doubt you would be asking if it just worked.

Internet does not work on my tablet

All of a sudden my tablet stopped connecting to the internet more than a month ago. Actually, it might be around the time that I received an email from Comcast stating that there was free xfinity wifi that the internet stopped working. There seems to be nothing wrong with the modem because the internet connection on my desktop has been working fine. There has been "intermittent" connections but not a reliable, steady connection. What is going on that my tablet can no longer connect to the internet?

I would recommend checking what wifi network you are connecting to. Xfinity wifi is their hotspot not your internal network. if you are connected to the xfinity wifi it will not work unless you sign in.

Internet Streams in Playlists do not show up on Apple TV

I use the following setup:
- Apple TV MD199LL/A (Software 6.0.1) just updated to the latest
- iTunes 11.1.3 for Windows (from a Windows 7 x64)
- iTunes 11.1.3 for MAC (from a Apple MacBook Pro x64, Maverix)
Homesharing is turned on both computers
From both machines I share pictures, videos and music.
All photos, videos and music files are getting displayed on the Apple TV menu, and can be played.
All iTunes playlists from both machines are getting displazed on the Apple TV
BUT!
If a internet stream is added to a playlist, this entry does not show on the Apple TV menu.
If the playlist contains only internet streams the Apple TV menu says "There are no songs in this library"
If I hit the play key on my remote, it will randomly play the first stream in the playlist (not realy reproducable pattern)
I can play those streams in iTunes and send it via AirPlay without problems,
Can anyone help me with this and tell me what I'm doing wrong?
Thank you

You can only view that rental on the iPad. For it to show up it has to be rented directly on ATV or through a computer and streamed via home sharing

Create a public Internet facing site with SharePoint Foundation

Hi,
Would I be able to use SharePoint Foundation to create a public Internet facing site? In addition, where can I find tutorial on how to create public Internet facing sites?
Thanks a lot!
Eduardo

Hi Eduardo,
You can create public Internet facing site using SharePoint Foundation, e.g. www.wssdemo.com
Regards,
Vladimir
MCTS, SharePoint tips blog: http://buyevich.blogspot.com

Possible Internet Tethering/Battery Life Issue

When either Cellular Data is turned Off, or Airplane Mode is turned On, Internet Tethering (Settings>General>Network) appears to have some process that runs continually in the background (evident by continuously spinning wheel next to the option). The running process has a demonstratively negative impact on battery life (1/3 reduction in ~ 30 mins). The Apple Genius at my local Apple Store and I verified the issue on numerous iPhone 4s that were on display. Turning Cellular Data On and ensuring the phone is not in Airplane Mode stops the activity. But obviously that defeats the purpose of having those options.
So if you are experiencing poor battery life, this might be your issue.
Message was edited by: Pahsina

Could this be causing the unexplained usage and data transfer? I have been trying to find what is causing this. http://discussions.apple.com/thread.jspa?threadID=2603718&tstart=0

Internet Connection Became Slow after Introduction of Cisco ASA 5505 to the Network

I configured a Cisco ASA 5505 (Version Cisco Adaptive Security Appliance Software Version 7.2(3)
Device Manager Version 5.2(3)
in transparent firewall mode and inserted after Cisco 1700 router. However, the internet connection became very slow and users are compaining that they cannot load any pages.
My setup looks like:
Internet --> Cisco 1700 --> Cisco ASA 5505 --> LAN
The license information is:
Licensed features for this platform:
Maximum Physical Interfaces : 8
VLANs                       : 3, DMZ Restricted
Inside Hosts                : Unlimited
Failover                    : Disabled
VPN-DES                     : Enabled
VPN-3DES-AES                : Enabled
VPN Peers                   : 10
WebVPN Peers                : 2
Dual ISPs                   : Disabled
VLAN Trunk Ports            : 0
This platform has a Base license.
The flash activation key is the SAME as the running key.
My running-config looks like:
ASA Version 7.2(3)
firewall transparent
hostname ciscoasa
domain-name default.domain.invalid
enable password 8Ry2YjIyt7RRXU24 encrypted
names
interface Vlan1
nameif inside
security-level 100
no shut
interface Vlan2
nameif outside
security-level 0
no shut
interface Ethernet0/0
switchport access vlan 2
no shut
interface Ethernet0/1
no shut
interface Ethernet0/2
no shut
interface Ethernet0/3
no shut
interface Ethernet0/4
no shut
interface Ethernet0/5
no shut
interface Ethernet0/6
no shut
interface Ethernet0/7
no shut
passwd 2KFQnbNIdI.2KYOU encrypted
regex urllist1 ".*\.([Ee][Xx][Ee]|[Cc][Oo][Mm]|[Bb][Aa][Tt]) HTTP/1.[01]"
regex urllist2 ".*\.([Pp][Ii][Ff]|[Vv][Bb][Ss]|[Ww][Ss][Hh]) HTTP/1.[01]"
regex urllist3 ".*\.([Dd][Oo][Cc]|[Xx][Ll][Ss]|[Pp][Pp][Tt]) HTTP/1.[01]"
regex urllist4 ".*\.([Zz][Ii][Pp]|[Tt][Aa][Rr]|[Tt][Gg][Zz]) HTTP/1.[01]"
regex domainlist1 "\.facebook\.com"
regex domainlist2 "\.diretube\.com"
regex domainlist3 "\.youtube\.com"
regex domainlist4 "\.vimeo\.com"
regex applicationheader "application/.*"
regex contenttype "Content-Type"
ftp mode passive
dns server-group DefaultDNS
domain-name default.domain.invalid
access-list outside_in extended permit ip any any
access-list inside_mpc extended permit tcp any any eq www
access-list inside_mpc extended permit tcp any any eq 8080
pager lines 24
mtu outside 1500
mtu inside 1500
ip address 192.168.1.254 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
access-group outside_in in interface outside
route outside 0.0.0.0 0.0.0.0 192.168.1.1 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout uauth 0:05:00 absolute
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
telnet timeout 5
ssh timeout 5
console timeout 0
class-map type regex match-any DomainBlockList
match regex domainlist1
match regex domainlist2
match regex domainlist3
match regex domainlist4
class-map type inspect http match-all BlockDomainsClass
match request header host regex class DomainBlockList
class-map type regex match-any URLBlockList
match regex urllist1
match regex urllist2
match regex urllist3
match regex urllist4
class-map inspection_default
match default-inspection-traffic
class-map type inspect http match-all AppHeaderClass
match response header regex contenttype regex applicationheader
class-map httptraffic
match access-list inside_mpc
class-map type inspect http match-all BlockURLsClass
match request uri regex class URLBlockList
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map type inspect http http_inspection_policy
parameters
protocol-violation action drop-connection
class AppHeaderClass
drop-connection log
match request method connect
drop-connection log
class BlockDomainsClass
reset log
class BlockURLsClass
reset log
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
policy-map inside-policy
class httptraffic
inspect http http_inspection_policy
service-policy global_policy global
service-policy inside-policy interface inside
prompt hostname context
Cryptochecksum:8ab1a53df6ae3c202aee236d6080edfd
: end
Could the slow internet connection be due to license limitations? Or is there something wrong with my configuration?
Please see the configuration and help.
Thanks

I have re-configured the ASA 5505 yesterday and so far it's working fine. I am not sure if the problem will re-appear later on. Anyways here is my sh tech-support
ciscoasa# sh tech-support
Cisco Adaptive Security Appliance Software Version 7.2(3)
Device Manager Version 5.2(3)
Compiled on Wed 15-Aug-07 16:08 by builders
System image file is "disk0:/asa723-k8.bin"
Config file at boot was "startup-config"
ciscoasa up 14 hours 16 mins
Hardware:   ASA5505, 256 MB RAM, CPU Geode 500 MHz
Internal ATA Compact Flash, 128MB
BIOS Flash M50FW080 @ 0xffe00000, 1024KB
Encryption hardware device : Cisco ASA-5505 on-board accelerator (revision 0x0)
                             Boot microcode   : CNlite-MC-Boot-Cisco-1.2
                             SSL/IKE microcode: CNlite-MC-IPSEC-Admin-3.03
                             IPSec microcode : CNlite-MC-IPSECm-MAIN-2.04
0: Int: Internal-Data0/0    : address is 001f.9ee8.ffa2, irq 11
1: Ext: Ethernet0/0         : address is 001f.9ee8.ff9a, irq 255
2: Ext: Ethernet0/1         : address is 001f.9ee8.ff9b, irq 255
3: Ext: Ethernet0/2         : address is 001f.9ee8.ff9c, irq 255
4: Ext: Ethernet0/3         : address is 001f.9ee8.ff9d, irq 255
5: Ext: Ethernet0/4         : address is 001f.9ee8.ff9e, irq 255
6: Ext: Ethernet0/5         : address is 001f.9ee8.ff9f, irq 255
<--- More --->
7: Ext: Ethernet0/6         : address is 001f.9ee8.ffa0, irq 255
8: Ext: Ethernet0/7         : address is 001f.9ee8.ffa1, irq 255
9: Int: Internal-Data0/1    : address is 0000.0003.0002, irq 255
10: Int: Not used            : irq 255
11: Int: Not used            : irq 255
Licensed features for this platform:
Maximum Physical Interfaces : 8
VLANs                       : 3, DMZ Restricted
Inside Hosts                : Unlimited
Failover                    : Disabled
VPN-DES                     : Enabled
VPN-3DES-AES                : Enabled
VPN Peers                   : 10
WebVPN Peers                : 2
Dual ISPs                   : Disabled
VLAN Trunk Ports            : 0
This platform has a Base license.
Serial Number: JMX1211Z2N4
Running Activation Key: 0xaf0ed046 0xbcf18ebf 0x80b38508 0xba785cc0 0x05250493
Configuration register is 0x1
Configuration has not been modified since last system restart.
<--- More --->
------------------ show clock ------------------
18:32:58.254 UTC Tue Nov 26 2013
------------------ show memory ------------------
Free memory:       199837144 bytes (74%)
Used memory:        68598312 bytes (26%)
Total memory:      268435456 bytes (100%)
------------------ show conn count ------------------
1041 in use, 2469 most used
------------------ show xlate count ------------------
0 in use, 0 most used
------------------ show blocks ------------------
SIZE    MAX    LOW    CNT
     0    100     68    100
<--- More --->
     4    300    299    299
    80    100     92    100
   256    100     94    100
1550   6174   6166   6174
2048   1124    551    612
------------------ show blocks queue history detail ------------------
History buffer memory usage: 2136 bytes (default)
------------------ show interface ------------------
Interface Internal-Data0/0 "", is up, line protocol is up
Hardware is y88acs06, BW 1000 Mbps
(Full-duplex), (1000 Mbps)
MAC address 001f.9ee8.ffa2, MTU not set
IP address unassigned
18491855 packets input, 11769262614 bytes, 0 no buffer
Received 213772 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 L2 decode drops, 0 demux drops
18185861 packets output, 11626494317 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 late collisions, 0 deferred
<--- More --->
0 input reset drops, 0 output reset drops
input queue (curr/max packets): hardware (0/0) software (0/0)
output queue (curr/max packets): hardware (0/55) software (0/0)
Control Point Interface States:
Interface number is unassigned
Interface Internal-Data0/1 "", is administratively down, line protocol is up
Hardware is 88E6095, BW 1000 Mbps
(Full-duplex), (1000 Mbps)
MAC address 0000.0003.0002, MTU not set
IP address unassigned
18184216 packets input, 11625360131 bytes, 0 no buffer
Received 206655 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 switch ingress policy drops
18490057 packets output, 11768078777 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collisions, 0 deferred
0 lost carrier, 0 no carrier
0 switch egress policy drops
Control Point Interface States:
Interface number is unassigned
Interface Loopback0 "_internal_loopback", is up, line protocol is up
Hardware is VirtualMAC address 0000.0000.0000, MTU 1500
IP address 127.1.0.1, subnet mask 255.255.0.0
<--- More --->
Traffic Statistics for "_internal_loopback":
1 packets input, 28 bytes
1 packets output, 28 bytes
1 packets dropped
      1 minute input rate 0 pkts/sec, 0 bytes/sec
      1 minute output rate 0 pkts/sec, 0 bytes/sec
      1 minute drop rate, 0 pkts/sec
      5 minute input rate 0 pkts/sec, 0 bytes/sec
      5 minute output rate 0 pkts/sec, 0 bytes/sec
      5 minute drop rate, 0 pkts/sec
Control Point Interface States:
Interface number is 28
Interface config status is active
Interface state is active
Interface Vlan1 "inside", is up, line protocol is up
Hardware is EtherSVI
MAC address 001f.9ee8.ffa2, MTU 1500
IP address 192.168.1.254, subnet mask 255.255.255.0
Traffic Statistics for "inside":
7742275 packets input, 903584114 bytes
10645034 packets output, 10347291114 bytes
184883 packets dropped
      1 minute input rate 320 pkts/sec, 35404 bytes/sec
      1 minute output rate 325 pkts/sec, 313317 bytes/sec
<--- More --->
      1 minute drop rate, 17 pkts/sec
      5 minute input rate 399 pkts/sec, 59676 bytes/sec
      5 minute output rate 483 pkts/sec, 503200 bytes/sec
      5 minute drop rate, 9 pkts/sec
Control Point Interface States:
Interface number is 1
Interface config status is active
Interface state is active
Interface Vlan2 "outside", is up, line protocol is up
Hardware is EtherSVI
MAC address 001f.9ee8.ffa3, MTU 1500
IP address 192.168.1.254, subnet mask 255.255.255.0
Traffic Statistics for "outside":
10750090 packets input, 10432619059 bytes
7541331 packets output, 870613684 bytes
109911 packets dropped
      1 minute input rate 328 pkts/sec, 313770 bytes/sec
      1 minute output rate 301 pkts/sec, 32459 bytes/sec
      1 minute drop rate, 2 pkts/sec
      5 minute input rate 485 pkts/sec, 503789 bytes/sec
      5 minute output rate 387 pkts/sec, 57681 bytes/sec
      5 minute drop rate, 2 pkts/sec
Control Point Interface States:
Interface number is 2
<--- More --->
Interface config status is active
Interface state is active
Interface Ethernet0/0 "", is up, line protocol is up
Hardware is 88E6095, BW 100 Mbps
Auto-Duplex(Full-duplex), Auto-Speed(100 Mbps)
Available but not configured via nameif
MAC address 001f.9ee8.ff9a, MTU not set
IP address unassigned
10749794 packets input, 10630700889 bytes, 0 no buffer
Received 2506 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 L2 decode drops
3 switch ingress policy drops
7541070 packets output, 1028190148 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collisions, 0 deferred
0 lost carrier, 0 no carrier
0 rate limit drops
0 switch egress policy drops
Control Point Interface States:
Interface number is unassigned
Interface Ethernet0/1 "", is up, line protocol is up
Hardware is 88E6095, BW 100 Mbps
Auto-Duplex(Full-duplex), Auto-Speed(100 Mbps)
<--- More --->
Available but not configured via nameif
MAC address 001f.9ee8.ff9b, MTU not set
IP address unassigned
7741977 packets input, 1064586806 bytes, 0 no buffer
Received 211282 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 L2 decode drops
0 switch ingress policy drops
10644663 packets output, 10543362751 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collisions, 0 deferred
0 lost carrier, 0 no carrier
0 rate limit drops
0 switch egress policy drops
Control Point Interface States:
Interface number is unassigned
Interface Ethernet0/2 "", is down, line protocol is down
Hardware is 88E6095, BW 100 Mbps
Auto-Duplex, Auto-Speed
Available but not configured via nameif
MAC address 001f.9ee8.ff9c, MTU not set
IP address unassigned
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants
<--- More --->
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 L2 decode drops
0 switch ingress policy drops
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collisions, 0 deferred
0 lost carrier, 0 no carrier
0 rate limit drops
0 switch egress policy drops
Control Point Interface States:
Interface number is unassigned
Interface Ethernet0/3 "", is down, line protocol is down
Hardware is 88E6095, BW 100 Mbps
Auto-Duplex, Auto-Speed
Available but not configured via nameif
MAC address 001f.9ee8.ff9d, MTU not set
IP address unassigned
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 L2 decode drops
0 switch ingress policy drops
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
<--- More --->
0 babbles, 0 late collisions, 0 deferred
0 lost carrier, 0 no carrier
0 rate limit drops
0 switch egress policy drops
Control Point Interface States:
Interface number is unassigned
Interface Ethernet0/4 "", is down, line protocol is down
Hardware is 88E6095, BW 100 Mbps
Auto-Duplex, Auto-Speed
Available but not configured via nameif
MAC address 001f.9ee8.ff9e, MTU not set
IP address unassigned
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 L2 decode drops
0 switch ingress policy drops
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collisions, 0 deferred
0 lost carrier, 0 no carrier
0 rate limit drops
0 switch egress policy drops
Control Point Interface States:
<--- More --->
Interface number is unassigned
Interface Ethernet0/5 "", is down, line protocol is down
Hardware is 88E6095, BW 100 Mbps
Auto-Duplex, Auto-Speed
Available but not configured via nameif
MAC address 001f.9ee8.ff9f, MTU not set
IP address unassigned
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 L2 decode drops
0 switch ingress policy drops
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collisions, 0 deferred
0 lost carrier, 0 no carrier
0 rate limit drops
0 switch egress policy drops
Control Point Interface States:
Interface number is unassigned
Interface Ethernet0/6 "", is down, line protocol is down
Hardware is 88E6095, BW 100 Mbps
Auto-Duplex, Auto-Speed
Available but not configured via nameif
<--- More --->
MAC address 001f.9ee8.ffa0, MTU not set
IP address unassigned
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 L2 decode drops
0 switch ingress policy drops
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collisions, 0 deferred
0 lost carrier, 0 no carrier
0 rate limit drops
0 switch egress policy drops
Control Point Interface States:
Interface number is unassigned
Interface Ethernet0/7 "", is down, line protocol is down
Hardware is 88E6095, BW 100 Mbps
Auto-Duplex, Auto-Speed
Available but not configured via nameif
MAC address 001f.9ee8.ffa1, MTU not set
IP address unassigned
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
<--- More --->
0 L2 decode drops
0 switch ingress policy drops
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collisions, 0 deferred
0 lost carrier, 0 no carrier
0 rate limit drops
0 switch egress policy drops
Control Point Interface States:
Interface number is unassigned
------------------ show cpu usage ------------------
CPU utilization for 5 seconds = 12%; 1 minute: 11%; 5 minutes: 11%
------------------ show cpu hogging process ------------------
Process:      Dispatch Unit, NUMHOG: 1, MAXHOG: 133, LASTHOG: 140
LASTHOG At:   04:45:59 UTC Nov 26 2013
PC:           8be0f7
Traceback:    8bed19 8bf553 302b87 3030a5 2fad69 7674bf 75ca16
              c6251d c62a4c c62f6c 75c653 767820 797f64 769c85
<--- More --->
------------------ show process ------------------
    PC       SP       STATE       Runtime    SBASE     Stack Process
Mwe 00c9bb24 01bb8700 013e3250          0 01733fc8 15616/16384 emweb/cifs
Lwe 001072ac 0176f9c4 013e32d0          0 0176d9f0 8132/8192 block_diag
Mrd 00223a67 01783d5c 013e33b0     314854 0177be18 25752/32768 Dispatch Unit
Msi 00f82847 01b07b84 013e3250        229 01b05bc0 7984/8192 y88acs06 OneSec Thread
Mwe 0011b1a5 01b09cfc 013e3250          0 01b07d88 7864/8192 Reload Control Thread
Mwe 00120606 01b1260c 013e5258          0 01b10988 7256/8192 aaa
Mwe 001486aa 01b19404 013e5ae8          0 01b15450 16020/16384 CMGR Server Process
Mwe 0014c3c5 01b1b4d4 013e3250          0 01b19570 7968/8192 CMGR Timer Process
Lwe 002227a1 01b239b4 013ee360          0 01b219f0 7524/8192 dbgtrace
Mwe 004e1ba5 01b29c34 013e3250        157 01b27d50 6436/8192 eswilp_svi_init
Mwe 01064b1d 01b4a7f4 013e3250          0 01b48890 7848/8192 Chunk Manager
Msi 008b61b6 01b52d54 013e3250        230 01b50da0 7856/8192 PIX Garbage Collector
Lsi 00ecb6ac 01b54e94 013e3250         12 01b52ec0 7552/8192 route_process
Mwe 008a5ddc 01b5dc04 0133b430          0 01b5bc40 8116/8192 IP Address Assign
Mwe 00acb779 01b60604 01346e10          0 01b5e640 8116/8192 QoS Support Module
Mwe 0091eba9 01b6275c 0133c530          0 01b60798 8116/8192 Client Update Task
Lwe 01083c8e 01b656d4 013e3250     123088 01b63770 7840/8192 Checkheaps
Mwe 00acfd7d 01b6b824 013e3250        623 01b69ad0 3476/8192 Quack process
Mwe 00b2a260 01b6dad4 013e3250         22 01b6bbf0 7364/8192 Session Manager
Mwe 00c55efd 01b78564 031d0478          4 01b74a50 14768/16384 uauth
<--- More --->
Mwe 00be3c9e 01b7aaec 0135c010          0 01b78b28 7524/8192 Uauth_Proxy
Mwe 00c52759 01b80e0c 01361770          0 01b7ee88 7712/8192 SMTP
Mwe 00c3f7b9 01b82eec 01361710          0 01b80fa8 7412/8192 Logger
Mwe 00c3fd26 01b8502c 013e3250          0 01b830c8 7492/8192 Thread Logger
Mwe 00f62272 01b9596c 013ac520          0 01b939c8 7188/8192 vpnlb_thread
Msi 00b4097c 01c598c4 013e3250        190 01c578f0 8000/8192 emweb/cifs_timer
Msi 005bd338 017a909c 013e3250      25855 017a7108 7412/8192 arp_timer
Mwe 005c76bc 01b486e4 013fba50      20643 01b46770 7348/8192 arp_forward_thread
Mwe 00c5a919 023fa5fc 013619e0          0 023f8648 7968/8192 tcp_fast
Mwe 00c5a6e5 023fc624 013619e0          0 023fa670 7968/8192 tcp_slow
Mwe 00c754d1 0240d42c 013628a0          0 0240b478 8100/8192 udp_timer
Mwe 0019cb17 01b404a4 013e3250          0 01b3e530 7984/8192 CTCP Timer process
Mwe 00efe8b3 0308c15c 013e3250          0 0308a208 7952/8192 L2TP data daemon
Mwe 00efef23 0308e194 013e3250          0 0308c230 7968/8192 L2TP mgmt daemon
Mwe 00eea02b 030c62ac 013a5c10         43 030c2338 16244/16384 ppp_timer_thread
Msi 00f62d57 030c82f4 013e3250        264 030c6360 7924/8192 vpnlb_timer_thread
Mwe 001b96e6 01b7cbbc 01b1e9c8          1 01b7ac48 7728/8192 IPsec message handler
Msi 001c9bac 01b8d4dc 013e3250       2917 01b8b548 7648/8192 CTM message handler
Mwe 00af93b8 031465b4 013e3250          0 03144640 7984/8192 ICMP event handler
Mwe 00831003 0314a724 013e3250        387 031467b0 16100/16384 IP Background
Mwe 0021b267 031a83c4 013123c0         31 03188450 123488/131072 tmatch compile thread
Mwe 009f2405 03290044 013e3250          0 0328c0c0 16072/16384 Crypto PKI RECV
Mwe 009f305a 03294144 013e3250          0 032901e0 16040/16384 Crypto CA
Mwe 0064d4fd 01b3e24c 013e3250          8 01b3c2f8 7508/8192 ESW_MRVL switch interrupt service
<--- More --->
Msi 00646f5c 032c134c 013e3250    3059378 032bf448 7184/8192 esw_stats
Lsi 008cbb80 032dc704 013e3250          3 032da730 7908/8192 uauth_urlb clean
Lwe 008afee7 034a0914 013e3250        197 0349e9b0 6636/8192 pm_timer_thread
Mwe 0052f0bf 034a35ac 013e3250          0 034a1648 7968/8192 IKE Timekeeper
Mwe 00520f6b 034a8adc 0132e2b0          0 034a4e38 15448/16384 IKE Daemon
Mwe 00bf5c78 034ac7ac 01360680          0 034aa7f8 8100/8192 RADIUS Proxy Event Daemon
Mwe 00bc32de 034ae79c 034dcbe0          0 034ac918 7208/8192 RADIUS Proxy Listener
Mwe 00bf5e0f 034b099c 013e3250          0 034aea38 7968/8192 RADIUS Proxy Time Keeper
Mwe 005aac4c 034b3154 013fb980          0 034b1250 7492/8192 Integrity FW Task
M* 008550a5 0009fefc 013e33b0       3183 034e3b20 24896/32768 ci/console
Msi 008eb694 034ed9d4 013e3250       2370 034ebc40 6176/8192 update_cpu_usage
Msi 008e6415 034f7dac 013e3250       1096 034f5eb8 6124/8192 NIC status poll
Mwe 005b63e6 03517d1c 013fbd10       1963 03515d78 7636/8192 IP Thread
Mwe 005becbe 03519e4c 013fbcb0          3 03517e98 7384/8192 ARP Thread
Mwe 004c2b36 0351befc 013fbae0          0 03519fe8 7864/8192 icmp_thread
Mwe 00c7722e 0351e06c 013e3250          0 0351c108 7848/8192 udp_thread
Mwe 00c5d126 0352008c 013fbd00          0 0351e228 7688/8192 tcp_thread
Mwe 00bc32de 03a6982c 03a5ee18          0 03a679b8 7512/8192 EAPoUDP-sock
Mwe 00266c15 03a6b614 013e3250          0 03a699e0 7032/8192 EAPoUDP
Mwe 005a6728 01b27b94 013e3250          0 01b25c30 7968/8192 Integrity Fw Timer Thread
-     -        -         -      47686621    -         -     scheduler
-     -        -         -      51253819    -         -     total elapsed
------------------ show failover ------------------
<--- More --->
ERROR: Command requires failover license
------------------ show traffic ------------------
inside:
received (in 51429.740 secs):
7749585 packets905087345 bytes
67 pkts/sec17013 bytes/sec
transmitted (in 51429.740 secs):
10653162 packets10355908020 bytes
40 pkts/sec201026 bytes/sec
      1 minute input rate 412 pkts/sec, 51803 bytes/sec
      1 minute output rate 475 pkts/sec, 522952 bytes/sec
      1 minute drop rate, 24 pkts/sec
      5 minute input rate 399 pkts/sec, 59676 bytes/sec
      5 minute output rate 483 pkts/sec, 503200 bytes/sec
      5 minute drop rate, 9 pkts/sec
outside:
received (in 51430.240 secs):
10758403 packets10441440193 bytes
42 pkts/sec203021 bytes/sec
transmitted (in 51430.240 secs):
7548339 packets872053854 bytes
<--- More --->
63 pkts/sec16037 bytes/sec
      1 minute input rate 479 pkts/sec, 523680 bytes/sec
      1 minute output rate 387 pkts/sec, 46796 bytes/sec
      1 minute drop rate, 3 pkts/sec
      5 minute input rate 485 pkts/sec, 503789 bytes/sec
      5 minute output rate 387 pkts/sec, 57681 bytes/sec
      5 minute drop rate, 2 pkts/sec
_internal_loopback:
received (in 51430.740 secs):
1 packets28 bytes
0 pkts/sec0 bytes/sec
transmitted (in 51430.740 secs):
1 packets28 bytes
0 pkts/sec0 bytes/sec
      1 minute input rate 0 pkts/sec, 0 bytes/sec
      1 minute output rate 0 pkts/sec, 0 bytes/sec
      1 minute drop rate, 0 pkts/sec
      5 minute input rate 0 pkts/sec, 0 bytes/sec
      5 minute output rate 0 pkts/sec, 0 bytes/sec
      5 minute drop rate, 0 pkts/sec
Aggregated Traffic on Physical Interface
<--- More --->
Ethernet0/0:
received (in 51431.740 secs):
10758462 packets10640075825 bytes
42 pkts/sec206042 bytes/sec
transmitted (in 51431.740 secs):
7548383 packets1029818127 bytes
63 pkts/sec20023 bytes/sec
      1 minute input rate 485 pkts/sec, 537048 bytes/sec
      1 minute output rate 395 pkts/sec, 54546 bytes/sec
      1 minute drop rate, 0 pkts/sec
      5 minute input rate 485 pkts/sec, 511723 bytes/sec
      5 minute output rate 387 pkts/sec, 65495 bytes/sec
      5 minute drop rate, 0 pkts/sec
Ethernet0/1:
received (in 51433.570 secs):
7749780 packets1066328930 bytes
67 pkts/sec20064 bytes/sec
transmitted (in 51433.570 secs):
10653359 packets10552787020 bytes
40 pkts/sec205006 bytes/sec
      1 minute input rate 419 pkts/sec, 59621 bytes/sec
      1 minute output rate 480 pkts/sec, 533950 bytes/sec
      1 minute drop rate, 0 pkts/sec
      5 minute input rate 399 pkts/sec, 67618 bytes/sec
<--- More --->
      5 minute output rate 482 pkts/sec, 511073 bytes/sec
      5 minute drop rate, 0 pkts/sec
Ethernet0/2:
received (in 51434.730 secs):
0 packets0 bytes
0 pkts/sec0 bytes/sec
transmitted (in 51434.730 secs):
0 packets0 bytes
0 pkts/sec0 bytes/sec
      1 minute input rate 0 pkts/sec, 0 bytes/sec
      1 minute output rate 0 pkts/sec, 0 bytes/sec
      1 minute drop rate, 0 pkts/sec
      5 minute input rate 0 pkts/sec, 0 bytes/sec
      5 minute output rate 0 pkts/sec, 0 bytes/sec
      5 minute drop rate, 0 pkts/sec
Ethernet0/3:
received (in 51434.730 secs):
0 packets0 bytes
0 pkts/sec0 bytes/sec
transmitted (in 51434.730 secs):
0 packets0 bytes
0 pkts/sec0 bytes/sec
      1 minute input rate 0 pkts/sec, 0 bytes/sec
      1 minute output rate 0 pkts/sec, 0 bytes/sec
<--- More --->
      1 minute drop rate, 0 pkts/sec
      5 minute input rate 0 pkts/sec, 0 bytes/sec
      5 minute output rate 0 pkts/sec, 0 bytes/sec
      5 minute drop rate, 0 pkts/sec
Ethernet0/4:
received (in 51434.870 secs):
0 packets0 bytes
0 pkts/sec0 bytes/sec
transmitted (in 51434.870 secs):
0 packets0 bytes
0 pkts/sec0 bytes/sec
      1 minute input rate 0 pkts/sec, 0 bytes/sec
      1 minute output rate 0 pkts/sec, 0 bytes/sec
      1 minute drop rate, 0 pkts/sec
      5 minute input rate 0 pkts/sec, 0 bytes/sec
      5 minute output rate 0 pkts/sec, 0 bytes/sec
      5 minute drop rate, 0 pkts/sec
Ethernet0/5:
received (in 51434.870 secs):
0 packets0 bytes
0 pkts/sec0 bytes/sec
transmitted (in 51434.870 secs):
0 packets0 bytes
0 pkts/sec0 bytes/sec
<--- More --->
      1 minute input rate 0 pkts/sec, 0 bytes/sec
      1 minute output rate 0 pkts/sec, 0 bytes/sec
      1 minute drop rate, 0 pkts/sec
      5 minute input rate 0 pkts/sec, 0 bytes/sec
      5 minute output rate 0 pkts/sec, 0 bytes/sec
      5 minute drop rate, 0 pkts/sec
Ethernet0/6:
received (in 51435.010 secs):
0 packets0 bytes
0 pkts/sec0 bytes/sec
transmitted (in 51435.010 secs):
0 packets0 bytes
0 pkts/sec0 bytes/sec
      1 minute input rate 0 pkts/sec, 0 bytes/sec
      1 minute output rate 0 pkts/sec, 0 bytes/sec
      1 minute drop rate, 0 pkts/sec
      5 minute input rate 0 pkts/sec, 0 bytes/sec
      5 minute output rate 0 pkts/sec, 0 bytes/sec
      5 minute drop rate, 0 pkts/sec
Ethernet0/7:
received (in 51435.010 secs):
0 packets0 bytes
0 pkts/sec0 bytes/sec
transmitted (in 51435.010 secs):
<--- More --->
0 packets0 bytes
0 pkts/sec0 bytes/sec
      1 minute input rate 0 pkts/sec, 0 bytes/sec
      1 minute output rate 0 pkts/sec, 0 bytes/sec
      1 minute drop rate, 0 pkts/sec
      5 minute input rate 0 pkts/sec, 0 bytes/sec
      5 minute output rate 0 pkts/sec, 0 bytes/sec
      5 minute drop rate, 0 pkts/sec
Internal-Data0/0:
received (in 51435.510 secs):
18513901 packets11784250044 bytes
25 pkts/sec229023 bytes/sec
transmitted (in 51435.510 secs):
18207269 packets11641332179 bytes
19 pkts/sec226078 bytes/sec
      1 minute input rate 891 pkts/sec, 595715 bytes/sec
      1 minute output rate 863 pkts/sec, 588935 bytes/sec
      1 minute drop rate, 0 pkts/sec
      5 minute input rate 885 pkts/sec, 584035 bytes/sec
      5 minute output rate 870 pkts/sec, 580393 bytes/sec
      5 minute drop rate, 0 pkts/sec
Internal-Data0/1:
received (in 51436.010 secs):
18207323 packets11641364184 bytes
<--- More --->
19 pkts/sec226076 bytes/sec
transmitted (in 51436.010 secs):
18513954 packets11784281987 bytes
25 pkts/sec229022 bytes/sec
      1 minute input rate 855 pkts/sec, 575808 bytes/sec
      1 minute output rate 884 pkts/sec, 582339 bytes/sec
      1 minute drop rate, 0 pkts/sec
      5 minute input rate 869 pkts/sec, 578350 bytes/sec
      5 minute output rate 883 pkts/sec, 581924 bytes/sec
      5 minute drop rate, 0 pkts/sec
------------------ show perfmon ------------------
PERFMON STATS:    Current      Average
Xlates               0/s          0/s
Connections         17/s          6/s
TCP Conns            8/s          2/s
UDP Conns            7/s          2/s
URL Access           0/s          0/s
URL Server Req       0/s          0/s
TCP Fixup            0/s          0/s
TCP Intercept        0/s          0/s
HTTP Fixup           0/s          0/s
<--- More --->
FTP Fixup            0/s          0/s
AAA Authen           0/s          0/s
AAA Author           0/s          0/s
AAA Account          0/s          0/s
------------------ show counters ------------------
Protocol     Counter                     Value   Context
IP           IN_PKTS                  168960   Summary
IP           OUT_PKTS                 169304   Summary
IP           TO_ARP                       61   Summary
------------------ show history ------------------
------------------ show firewall ------------------
Firewall mode: Transparent
------------------ show running-config ------------------
<--- More --->
: Saved
ASA Version 7.2(3)
firewall transparent
hostname ciscoasa
enable password
names
interface Vlan1
nameif inside
security-level 100
interface Vlan2
nameif outside
security-level 0
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
<--- More --->
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
passwd
regex domain1 ".facebook\.com"
regex domain2 ".fb\.com"
regex domain3 ".youtube\.com"
ftp mode passive
access-list ACL_IN extended permit ip any any
pager lines 24
mtu inside 1500
mtu outside 1500
ip address 192.168.1.254 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-523.bin
no asdm history enable
<--- More --->
arp timeout 14400
access-group ACL_IN in interface outside
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout uauth 0:05:00 absolute
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
telnet timeout 5
ssh timeout 5
console timeout 0
class-map type regex match-any DomainBlockList
match regex domain1
match regex domain2
match regex domain3
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
<--- More --->
message-length maximum 512
match domain-name regex class DomainBlockList
drop-connection log
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
service-policy global_policy global
prompt hostname context
Cryptochecksum:bb5115ea1d14ee42e7961ef0c9aaed86
: end
<--- More --->
------------------ show startup-config errors ------------------
INFO: No configuration errors
------------------ console logs ------------------
Message #1 : Message #2 : Message #3 : Message #4 : Message #5 : Message #6 : Message #7 : Message #8 : Message #9 : Message #10 : Message #11 : Message #12 : Message #13 : Message #14 :
Total SSMs found: 0
Message #15 :
Total NICs found: 10
Message #16 : 88E6095 rev 2 Gigabit Ethernet @ index 09Message #17 : MAC: 0000.0003.0002
Message #18 : 88E6095 rev 2 Ethernet @ index 08Message #19 : MAC: 001f.9ee8.ffa1
Message #20 : 88E6095 rev 2 Ethernet @ index 07Message #21 : MAC: 001f.9ee8.ffa0
Message #22 : 88E6095 rev 2 Ethernet @ index 06Message #23 : MAC: 001f.9ee8.ff9f
Message #24 : 88E6095 rev 2 Ethernet @ index 05Message #25 : MAC: 001f.9ee8.ff9e
Message #26 : 88E6095 rev 2 Ethernet @ index 04Message #27 : MAC: 001f.9ee8.ff9d
Message #28 : 88E6095 rev 2 Ethernet @ index 03Message #29 : MAC: 001f.9ee8.ff9c
Message #30 : 88E6095 rev 2 Ethernet @ index 02Message #31 : MAC: 001f.9ee8.ff9b
Message #32 : 88E6095 rev 2 Ethernet @ index 01Message #33 : MAC: 001f.9ee8.ff9a
Message #34 : y88acs06 rev16 Gigabit Ethernet @ index 00 MAC: 001f.9ee8.ffa2
Message #35 :
Licensed features for this platform:
Message #36 : Maximum Physical Interfaces : 8
<--- More --->
Message #37 : VLANs                       : 3, DMZ Restricted
Message #38 : Inside Hosts                : Unlimited
Message #39 : Failover                    : Disabled
Message #40 : VPN-DES                     : Enabled
Message #41 : VPN-3DES-AES                : Enabled
Message #42 : VPN Peers                   : 10
Message #43 : WebVPN Peers                : 2
Message #44 : Dual ISPs                   : Disabled
Message #45 : VLAN Trunk Ports            : 0
Message #46 :
This platform has a Base license.
Message #47 :
Message #48 : Encryption hardware device : Cisco ASA-5505 on-board accelerator (revision 0x0)
Message #49 :                              Boot microcode   : CNlite-MC-Boot-Cisco-1.2
Message #50 :                              SSL/IKE microcode: CNlite-MC-IPSEC-Admin-3.03
Message #51 :                              IPSec microcode : CNlite-MC-IPSECm-MAIN-2.04
Message #52 :   --------------------------------------------------------------------------
Message #53 :                                  .            .
Message #54 :                                  |            |
Message #55 :                                 |||          |||
Message #56 :                               .|| ||.      .|| ||.
Message #57 :                            .:||| | |||:..:||| | |||:.
Message #58 :                             C i s c o S y s t e m s
Message #59 :   --------------------------------------------------------------------------
<--- More --->
Message #60 :
Cisco Adaptive Security Appliance Software Version 7.2(3)
Message #61 :
Message #62 :   ****************************** Warning *******************************
Message #63 :   This product contains cryptographic features and is
Message #64 :   subject to United States and local country laws
Message #65 :   governing, import, export, transfer, and use.
Message #66 :   Delivery of Cisco cryptographic products does not
Message #67 :   imply third-party authority to import, export,
Message #68 :   distribute, or use encryption. Importers, exporters,
Message #69 :   distributors and users are responsible for compliance
Message #70 :   with U.S. and local country laws. By using this
Message #71 :   product you agree to comply with applicable laws and
Message #72 :   regulations. If you are unable to comply with U.S.
Message #73 :   and local laws, return the enclosed items immediately.
Message #74 :
Message #75 :   A summary of U.S. laws governing Cisco cryptographic
Message #76 :   products may be found at:
Message #77 :   http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
Message #78 :
Message #79 :   If you require further assistance please contact us by
Message #80 :   sending email to [email protected].
Message #81 :   ******************************* Warning *******************************
Message #82 :
<--- More --->
Message #83 : Copyright (c) 1996-2007 by Cisco Systems, Inc.
Message #84 :                 Restricted Rights Legend
Message #85 : Use, duplication, or disclosure by the Government is
Message #86 : subject to restrictions as set forth in subparagraph
Message #87 : (c) of the Commercial Computer Software - Restricted
Message #88 : Rights clause at FAR sec. 52.227-19 and subparagraph
Message #89 : (c) (1) (ii) of the Rights in Technical Data and Computer
Message #90 : Software clause at DFARS sec. 252.227-7013.
Message #91 :                 Cisco Systems, Inc.
Message #92 :                 170 West Tasman Drive
Message #93 :                 San Jose, California 95134-1706
ciscoasa#

New MBP - wireless/internet access networking problem - a summary!

Greetings!
New MBP here, with all the trimmings (MacOS X 10.4.10 - Safari 3 Beta). New also to the Apple/MAC world
MBP >> wireless networking into a Linksys WRT54G router and >> thru HughesNet DW7000 Satellite Internet connection (not the fastest, but hey, the US and especially rural areas are NOT S. Korea when it comes to speedy internet connections!
Frankly, I bought into it for two reasons: First, hearing about the vaunted Mac a/v/ and doc/photo editing capabilities,... and about MacOS stability, etc... Well, it all needs a little work still: on the part of new users like me, but also probably on the part of the Apple/Mac people as well. 2nd reason I decided to purchase the MBP - i.e. ability to run Windows (I have not yet tried BootCanp, etc...: still resolving preliminary issues!). I still live in a heavy Win environment at my business - no other way of course!
Communications issues seem to still prevail: I am hanging out at several VERY HELPFUL forums (AppleDiscussionForum, MacRumorsForums, etc...) and the same issues keep popping up. Im my case, same as all above reported, with a few additional points, as follows:
1. Xmission errors: seem to be - at least in my case - a constant factor, regardless on how close/far i am from my wireless router. For example, I would be attempting to dwnload an upgrade (large)QT or MacOS file. i am barely into the dowmoad, and I already have several Read/Send errors. By the end of the download, I will have probably about 15 Rcv and 5 Send errors. Never gets quite that bad in my Win machines, I must mention. Anything to do here (I know, there are such things always affecting wireless com). AND, MOST importantly, how that this affect the effectiveness of the upgrade (I spotted same thing with MacOS 10.4.10 and Safari Beta 3 upgrade downloads!). Would it be likely that applying upgrades in such circumstances would screw up the OS??? Could OTOH such errors be automatically "compensated" by re-xmits from the source, and eventually the download would be OK? Because quite frankly, I do NOT know if my important upgrade download was OK to apply to the system, given those errors!!!
Also same thing with PING errors. Quite frequent when pinging another device on my network.
2. Quite often, accessing a site will proceed somehow OK, and then things will get stuck twd the end, as if some buffer somewhere gets overloaded??? Of course, as elsewhere reported, same can often happen with com getting stuck right over the "www" part of the URL!
3. AND, of course, the often reported "NO connection to the Internet", but computer shows good signal level and connection otherwise.
4. Strangely enough, seems that the Airport Extreme wifi card sort of "warms up the the internet" as one proceeds to start using it. It eventually picks up on a network, and often "improves" its connection over time!
5. Built in Airport Extreme seems to not exhibit up all immediately surrounding networks. Sensitivity issue?? iStumbler does.
6. iStumbler permanently posts noise level of 9% regardless of how close to my wireless router/broadband modem I am. Anyone uses iStumbler to monitor network traffic?
This is getting longuish: I just want to get over all those p*ant issues and get into putting my a/v stuff together!!
- Roger T
Thanks for just reading all this!. I am not sure it is all fixable (back to the Win "features" terminology, really meaning "bugs"??)

Thanks, BDaqua. This support forum is quite well stocked: I have been perusing all its nooks and cranies!
On the www.dslreports.com - All things Mac - forum, I spotted a couple of mentions of the following type of infromation:
link: »www.hardmac.com/news/2007-07-27/#7039
- The first TechNote provides information concerning the Airport problem affecting the MBP Santa Rosa (but also other Mac Intel). When used on battery, the wireless connection drops and one can even experience kernel panic. Apple Centers are asked not to exchange affected notebook as this is due to a unidentified bug in the Atheros driver, and should be fixed in the future with a simple Airport system update. So for the moment, unfortunate users are asked to directly power their notebook when using wireless network, or using Ethernet connection when running on battery... in other words, turn your notebook into a desktop
to forum · permalink
I am wondering if you and folks on this close-to-Apple forum know anything about this. At least, we could just await remedy instead of messing around endlessly looking for solutions and... pondering as to whether it was a wise thing to purchase an expensive machine which happens to have trouble communicating online. After all, seems that the Mac folks are prone to spend MORE time online uploading/downloading music and videos instead of my being normally doing with the rest of my (Win) computers, i.e. work on customer lists, correspondence, inventories, accounting, data bases, etc....
So, seems to me we do have a pb and Apple might just save a few $$$ on silly ads and get to work on com instead. if nothing else to avoid the appearance of further - admittedly rather funny - ad-spoofs!
So back to your further inquiry. I run a wireless network from a HughesNet satellite modem, thru a Linksys WRT54GL wireless router, into some nearby office LANed desktops and point of sale equipment, to another neighbouring facility via wireless bridge, and to my Mac laptop. Distance from the laptop to the router: 50 ft max.
It all works surprizingly very well: up to 200kbps up and 1000 kbps down (in prime time, 150 up and 600 down). OK, my set up looks complex and incurring LOTS of activity. Actually, online activity is quite minimal and well scheduled - right now I am the only machine on the network online. Otherwise, our office processes online money wiring for customers among other things.
I'll try your DNS server choice on the Mac settings first. Will report accordingly.
Thanks for everything!
- Roger T

New FIOS customer with dropped VOIP calls and Internet connection

I am a new FIOS customer. Got my 50/25 connection a week ago, switching from a TWC 6/1 connection. Ever since the new connection, I've had numerous issues.
My VOIP (Ooma) connection constantly drops and re-connects during conversations
I've had random Internet connection losses, which picks up again after a few minutes
My home alarm starts chirping every once in a while
I've contacted Verizon several times due to these problems and have received varying answers with no resolution of the problem.
The first time I spoke with support, the tech logged into my router and changed the WiFi channel saying that would fix the problem. It didn’t.
The second time I contacted them, the tech ran a bunch of diagnostics and said everything looked fine so it must be an IP address conflict with my devices, because I had a couple devices using static IP addresses. He said everythinf should be DHCP and the last two digits could not be higher than 99 (192.168.1.99). He said FIOS does not support 3-digit numbers at the end.
So I changed all my devices to DHCP and ran some online VOIP tests. It showed a packet loss of 2-5% and MOS score of 1 (which is bad). I was still getting dropped connections, so I disconnected all devices and connected just one computer to the router and tested again. I was still getting packet loss.
Then I called support a third time, this time the tech said there were no 2-digit IP restrictions and that he was detecting there was no UPS baterry backup for the ONT which was probably causing the problem, so he dispatched a field tech to my house.
Today the field tech came (same guy as before), he took one look at the box and said it was too close to my Electric meter and the RF from the meter was causing interference to the FIOS connection and resulting in dropped connection.
He moved the ONT to another location and said that should fix it.
Well, I'm still seeing packet loss and low MOS score when I run the VOIP test.
I don't know how much of what the techs are saying is true and how much is made up stuff.
Has anyone had similar issues and have thoughts on solutions or likely causes for dropped VOIP calls and connections? Could RF be causing this?
I thought going from a 6/1 Cable connection to a 50/25 FIOS connection would be awesome, but this has turned out to be a nightmare, and I may have to switch back to cable if the problem is not resolved.
I would appreciate any help.
Thanks!

Don't know where the packet loss is happening. I ran the VOIP test on myspeed.visualware.com and it shows a packet loss of 2-5% at different times and a MOS score of 1.
The report says MOS should be around 4 for good VOIP calls.
The Verizon tech who came to the house just blamed the electric meter box for RF interference and move the ONT farther away.
My concern is that I'm getting different answers from different techs at Verizon.
Regarding IP addresses. The Router shows a DHCP range from 192.162.1.2 to 192.168.1.254 as available for devices on the network. So, if I need to assign a static IP to a device should I use a number below 99 or above 151?
Thanks!

How to connect my smart tv to internet using Apple TV?

Is it possible to connect my smart tv to internet through Apple TV?

I am wondering if Apple TV can connect my TV to internet or should I get a TV wireless device

Problem with jinitiator in my internet explorer

I am using Forms and Reports 10g and Database 10g. Installed both successfully.
When i try to run a form(even Test.fmb) , it is not working in internet explorer.... i still could not understand the problem. But, i noticed one thing... either, JInitiator is not installed or it is not invoking automatically when i run the forms... this is the problem.. can someone help me on this please?

I am using Forms and Reports 10g and Database 10g.
Installed both successfully.
When i try to run a form(even Test.fmb) , it is not
working in internet explorer.... i still could not
understand the problem. But, i noticed one thing...
either, JInitiator is not installed or it is not
invoking automatically when i run the forms... this
is the problem.. can someone help me on this please?When you say "it is not working..." what do you mean??
What is the error message raised??
Does the browser crashes??
Keep in mind that to run a form from the forms builder (including test form) you must start the OC4J instance.
Tony

How to connect a Sony Bravia TV to the internet through your Airport network

Since it took me a lot of time to figure out how to connect my Sony Bravia TV to the internet through my Airport network, I better share how to do it. Hopefully saving others a lot of time.
My 32EX600 Sony Bravia TV is Ethernet connected to my Mac Mini, which is part of my Airport network, together with another Mac, an Airport Extreme Base Station and an ADSL modem/router. Moreover, the Mac Mini is connected to the TV by HDMI.
Whatever I tried in the TV’s Wired Network Set-up (Auto, or Manual with manual IP, Subnet Mask, Default Gateway and DNS IPs), I couldn’t get it right. Cable Connection and Local Access were mostly OK, Internet Access always Failed.
The solution lies in the Sharing panel of the System Preferences of the Mac Mini. In the Internet Sharing item of that panel, you should choose to “share your internet connection from WiFi to computers (the TV in this case) using Ethernet“, and NOT (as I had chosen before and seemed so obvious) “share your internet connection from Airport to computers using Ethernet“. After that change, the Bravia Network Set-up, using the Wired and Auto options, flawlessly connected to the internet. No expensive (Sony) WiFi USB dongle needed.

I have now had a detailed reply from Sony Europe and the way to do this is to:
1.       Press Home on the TV Setup
2.       Use the right and left arrow to select Setting.
3.       Use the up and down to select Network, press Enter.
4.       Select Network Setup.
5.       Select Wireless setup.
6.       Select Scan
7.       Select your network
8.       A new screen will appear asking for entering the security key.
9.       Enter your WPA2 key.
10.   Select Enter.
11.   It will take you back to the same screen asking for entering the
security key.
12.   Press the right arrow.
13.   Select Auto.
14.   Press the right arrow.
15.   Select Save and connect.
These instructions are not the same as shown on the TV but they worked fine for me so they may help others with a similar problem.

I have a 2.2 GHz Intel Core i7 macbook pro that has lion installed when I recieved it, according to the support pages AHT is supposed to work over the internet if it wasn't installed, Mine wasn't and it doesn't work. Where can I download it from?

I Have a 2.2 GHz Intel Core i7 macbook pro, I recieved it with OSx 7.2 lion installed, I need to us AHT (apple hardware test) according to the support page that I copy here
Additional Information
Apple Hardware Test is included on the DVDs that are shipped with some Macintosh computers. If the copy on your hard drive becomes unavailable, use the DVDs to run Apple Hardware Test.
For Intel-based Apple computers that shipped with Mac OS X v10.5.4 or earlier, Apple Hardware Test is located on the Mac OS X Install Disc 1 and should be included with your computer.
For Apple computers that shipped with Mac OS X v10.5.5 to 10.6.7, Apple Hardware Test is located on the Applications Install Disc 2 and should be included with your computer.
For some Apple computers that shipped with OS X Lion, if Apple Hardware Test cannot be found on the hard drive, an Internet-based version starts up instead.
This doesn't work as the additional information statement says it should above. Could someone at apple give me an idea of where to get it or what the "REAL" solution is, since it doesn't work on an internet version which was confirmed today at the Genius Bar in the Apple store.
Please help me

chrisfrommarion wrote:
Thanks, while it worked on yours it doesn't work on mine, any other ideas?
Are you holding down the "d" key, all by itself, just after the system shuts down for a restart?
And how long did you hold it down?
I held mine down for about 40-50 seconds. Then I lookat at my routers WAN light and it was flickering so I let up on the d key.
If that does not work then maybe there is something wrong with your MBP. Is that the reason you want to run this test, something isn't right with your unit?

I cannot receive email properly now. When I open mail, it says that is downloading about 1,700 emails. At the very end, it gives me my newest ones. But this takes a long time. I've contacted the Internet service provider and verified all the right setting

I cannot receive email properly on either my IPad or my IPhone. I have had them for over a year and they have always worked fine. Until three days ago, when they both started acting up. On the IPad, when I open mail, it says it is downloading about 1,700 emails. At the very end, which takes quite a while to get to, I finally get the most recent ones. The IPad is sending emails just fine.
On my IPhone, when I open mail, it says it is downloading 100 emails, but it doesn't do that. And it gives me no new emails at all. The IPhone is sending email just fine.
I have already deleted the email accounts on both devices and reinstalled them. I've contacted the Internet service provider and verified all the right settings. The Outlook email on my desktop is working perfectly.

WMV is a heavily-compressed format/CODEC, and the processing time will depend on several factors:
Your CPU, which is not that powerful in your case
Your I/O sub-system, which is likely a single HDD on your laptop
The source footage. What is your source footage?
Any Effects added to that footage. Do you have any Effects?
Each of those will have an impact on the time required.
The trial has only one main limitation - the watermark. Now, there are some components, that have to be activated, but are not with the trial, but they would be evident with Import of your source footage, if it's an issue.
Good luck,
Hunt

Internet

Similar Messages

Maybe you are looking for