Interop problem between brocade 300d/200e and MDS 9509

Hi, I want to know if mds 9509 can interop with the SAN equipment below.
If yes, can you help me to configure (VSAN and type of ports - TE or T or F).
I tried with the interop VSAN 1 and 3, but there is still no communication.
MDS 9509
kickstart: version 5.2(2d)
system: version 5.2(2d)
and
Brocade 200E or 300D
V6.1.0J

You want Cisco MDS to be the principal switch, this is all explained in the FC standards.
The switch with the lowest wwn becomes the principal switch if the domain priorities set the same.
It is all explained in MDS config guide:
http://www.cisco.com/en/US/products/ps5989/products_configuration_guide_chapter09186a0080664c6a.html
http://www.cisco.com/en/US/products/ps5989/products_configuration_guide_chapter09186a0080664cd1.html#wp1185238

Similar Messages

I have connection problems between the mini ipad and my powerbook g4, you are not allowed to see or share applications.

I have connection problems between the mini ipad and my powerbook g4, you are not allowed to see or share applications.

That is not possible.

Wireless Communication problem between HP Photosmart C309g and Linksys E2500 router

Hello,
I used C309g connected to DLink Dl-624 router (wireless connection) and everything was working correctly. Now I changed the router to Linksys E2500 (dual band router) and I've got strange problem I cannot fix.
The printer connects to router, obtaint IP address and network report does not indicates any problem. Also HP Print & Scan Doctor does not report any problem.
But when I try to print from my laptop, the pint start and is quickly broken, and I've got the message that printer is diconnected. The printer stops. When I leave it for a coupl of minutes, the printing starts and after few lines stops again with the same message on the laptop.
When I return to DLink router, everything works correctly.
I tried with 4 different laptops, with different operating systems, and i've gor the same issue. But the laptops communicates well, the network does not break..
I enforced router to use IP reserved number for the printer, used the same IP range and number for my network and printer on Linksys and DLink, does not help. I've turn off firewall on the router - does not help. I've change the channel range for 2.4 GHz network to 20MHz only - does not help.
What would be the problem with it? Is there something related to dual-band? Any idea?

Well, I did not install the printer drivers from cd, I did it from the Hp webpage. Looking for the potential problems I reinstall the drivers and it did not helped. I also turn off the firewall router application and it also did not help.
I suspect I have the printer firmware up to date e.g my version is WHM1FN0931BR.
I've made some test with router settings: switch from automatic WPS configuration to manual and tried network mode as wireless b only (default was mixed). This makes the communication between router and printer continuous (no breaks), I could normally scan documents directly to network drive, but could not print at all: the printing option on my laptop pops up, and looks like document was sent to nowhere.. printer did not start to print at all. But other network devices starts to experience connection breaks and performance issues. When I returned to mixed mode, the communication between network devices returns to normal operation, but not with the printer - where I experiences original problems.
My network is quite complex - 4 laptops and 2 TV sets communicates (wireless or LAN 100mbit cable ) via cental router with NAS server (with DLNA) and internet (DSL cable modem). Router also works as DHCP server, where any server type devises (e.g my printer) has reserved IP addresses (based on MAC number). No matter if I try to print from wireless or via LAN cable laptop, no matter what OS is on laptop. I have even tried to connect the printer via LAN (forcing DHCP to give the LAN pronter the same IP as was previously for wireless ), and stil the same: communication is broked and the print starts and suddenly stops.., then starts angain after few minutes - and stops (the same problem as wireless). So I do not understand what the hell is going on. Rest of my network works perfect .. except this printer.. Any other idea, what coul be the issue?

DB link problem between active Data Guard and report application database

My database version in 11.2.0.2.0 and OS is Oracle Solaris 10 9/10.
I am facing a problem in my Active data guard Database for reporting purpose. Active Data guard information is as below.
SQL> select name, database_role, open_mode from v$database;
NAME DATABASE_ROLE OPEN_MODE
ORCL PHYSICAL STANDBY READ ONLY WITH APPLY
Problem detail is below
I have created a db link (Name: DATADB_LINK) between active data guard and report application database for reporting purpose.
SQL> create database link DATADB_LINK connect to HR identified by hr using 'DRFUNPD';
Database link created.
But when I run a query using db link from my report application database I got this below error.
ORA-01555: snapshot too old: rollback segment number 10 with name "_SYSSMU10_4261549777$" too small
ORA-02063: preceding line from DATADB_LINK
Then I check Active Data Guard database alart log file and get below error
ORA-01555 caused by SQL statement below (SQL ID: 11yj3pucjguc8, Query Duration=1 sec, SCN: 0x0000.07c708c3):SELECT "A2"."BUSINESS_TRANSACTION_REFERENCE","A2"."BUSINESS_TRANSACTION_CODE",MAX(CASE "A1"."TRANS_DATA_KEY" WHEN 'feature' THEN "A1"."TRANS_DATA_VALUE" END ),MAX(CASE "A1"."TRANS_DATA_KEY" WHEN 'otherFeature' THEN "A1"."TRANS_DATA_VALUE" END )
But the interesting point if I run the report query directly in Active Data Guard database, I never got error.
So is it a problem of DB link between active Data Guard and other database?

Fazlul Kabir Mahfuz wrote:
My database version in 11.2.0.2.0 and OS is Oracle Solaris 10 9/10.
I am facing a problem in my Active data guard Database for reporting purpose. Active Data guard information is as below.
SQL> select name, database_role, open_mode from v$database;
NAME DATABASE_ROLE OPEN_MODE
ORCL PHYSICAL STANDBY READ ONLY WITH APPLY
Problem detail is below
I have created a db link (Name: DATADB_LINK) between active data guard and report application database for reporting purpose.
SQL> create database link DATADB_LINK connect to HR identified by hr using 'DRFUNPD';
Database link created.
But when I run a query using db link from my report application database I got this below error.
ORA-01555: snapshot too old: rollback segment number 10 with name "_SYSSMU10_4261549777$" too small
ORA-02063: preceding line from DATADB_LINK
Then I check Active Data Guard database alart log file and get below error
ORA-01555 caused by SQL statement below (SQL ID: 11yj3pucjguc8, Query Duration=1 sec, SCN: 0x0000.07c708c3):SELECT "A2"."BUSINESS_TRANSACTION_REFERENCE","A2"."BUSINESS_TRANSACTION_CODE",MAX(CASE "A1"."TRANS_DATA_KEY" WHEN 'feature' THEN "A1"."TRANS_DATA_VALUE" END ),MAX(CASE "A1"."TRANS_DATA_KEY" WHEN 'otherFeature' THEN "A1"."TRANS_DATA_VALUE" END )
But the interesting point if I run the report query directly in Active Data Guard database, I never got error.
So is it a problem of DB link between active Data Guard and other database?
Check this note which is applicable for your environment
*ORA-01555 on Active Data Guard Standby Database [ID 1273808.1]*
also
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:8908307196113

Problem between K7T266 Pro2-RU and ASUS GeForce 3 V8200

Hi, i've installed an ASUS GeForce 3 V8200 in my K7T266 Pro2-RU.
The system starts correctly, but when i force the AGP from BIOS at 4x all games doesn't run very well...
I usually play games like UT or RTCW and when i run they i see many problem with the 3D rendering and shadow build...
All drivers are up to date...
How can i resolve this problem ???
Thanx...

Quote
Originally posted by Fredrik Åsenius
I guess you got your problem solved. Just wondered about:
Did you uninstall the previous drivers?
Do you have any PCI cards near the AGP?
What are your system temperature, according to BIOS?
I think i'll follok the Toenne suggest. The difference between the AGP 2x and 4x is very small, anyway my drivers are (un)installed correctly and i don't have any PCI card near the AGP slot. Instead i think that in the future i'll pay more attention at the temperature problem: my Athlon XP 2000+ is hot also with a good copper cooler...
Another questios is, can anyone help me to find the best BIOS settings for my system?
In the next days i'll post my BIOS configuration so we can see where i've mistaken.
Thanx again...

HT4623 Problem between iPhone 4, PC and iTunes. Please help!!

I inserted the plugs between my iPhone 4 and my PC. And then, the iTunes connected automatically. However, I dont know why the update function cannot stop at my iTunes and my mobile cannot run again automatically. Please help. Tks

It could be caused by a weak phone connection.

Problems between a Wireless Controller and a Switch.

I have a Wireless Controller 4402 connected to one sw2960G.
I configured the controller with LAG and the switch (sw2960G) with etherchanel.
I connected the controller 2 distribution ports to the 2 ports of the switch (configured with etherchanel).
It worked like it should work.
But the problem is like this: if I take one cable that is connected to the switch and unplugged that cable from the switch (if that cable is the one connected to controllers port one) I have connectivity between both machines.
If I plug in the switch the cable connected to controller port one and take the other cable and unplugged that cable from the switch I stop the connectivity between the two machines.
I think that was not supposed to happenâ¦ because the LAG in the controller should put every AP in the second controller's port, and the connectivity between the machines should not end.
Can any one help me?
Can any one tell me what I am doing wrong?
Thanks in advance,
Rui

With LAG enabled in the controller I think I can have only one ap-manager interface.
The LAG will (it is supposed to) do the load balance automatically.
I mean, if one of the interfaces is âdownâ the other will have to coupe with all the AP's.
I should have always connection between the controller and the switch.
The STP of the controller is configured by default (STP Mode = OFF).
In the case of etherchannel load balanceâ¦ I saw the Cisco documentation and I did not saw any thing about that. I think that The LAG as to do that for the controllerâ¦ I'm right about that?
I will see the link that you advisedâ¦
Can you help me?
Thanks,
Rui

BIG PROBLEM BETWEEN PREMIERE PRO CS6 and FAST TRACK PRO

Hi there...im running premiere pro cs6 on macbook pro 2010 with 8 gb of ram...im editing a project of hd material from a canon 5d..i got all the sound from an external recorder, all the sound is already syncronized... i need to do some cleaning on it....i got an USB fast track pro from M-audio that work well....
the problem is this : every time i have to send a clip to another aplication for the cleaning of the sound( audition with dynamic link or soundtrack pro exporting a .wav file) after a while (it can be a couple of minutes or more) i listene a clic on my headphones and the sound goes back to the speakers of the macbook pro, after that i must reconfigure again the audio hardware and audio output mapping again ( this happen almost with every clip and only between audition and premiere) anyway i started to use soundtrack pro to avoid this problem... but what is happening now is that many times after i listen the clic on the headphones or after im tryng to go back from one audio application to premiere, premiere freeze out or shhot down....
the poject is kind of big and restart premiere 3 or 4 times in an hour of job in my mac book pro its not what i call a productive hour oj job...
somebody have the same issue??
please let me know becouse im starting to get really mad...
anyway ill post also in the m- audio website to check it out over there
thanks in advance

Hu Simon...thanks for the answer but how i already writed in my post im on a macbook pro(internal audio card are out of the question)...
anyway are you suggesting that adobe doesnt work well with usb audio devices???
becouse for now i have to stick with it....
if somebody got a suggestion please let me know

Communication problem between USB MIDI keyboard and logic

Haven't used program in a while, but ready to record a bunch of new stuff and when I started up Logic I cannot get my keyboard to send logic a MIDI signal. I don't ever remember having this happen before. I have always just plugged my keyboard in through the USB port and it works fine but there is no signal at all in the transport window where it says 'no in no out.' Usually whatever chord or note is played is read here as well as note velocity. I thought I could troubleshoot this on my own but I'm stumped. The only thing I can think of that might be the problem is that I have upgraded to 10.5 from 10.4 since the last time I've done any recording. I also have an older version of logic (7) but I don't want to upgrade as I (at one point anyway) was pretty familiar with this version and I have the book to this version. Please help!
Thanks

phudnut wrote:
The only thing I can think of that might be the problem is that I have upgraded to 10.5 from 10.4 since the last time I've done any recording.
That seems like the most likely reason that it doesn't work now - you don't say what kind of keyboard it is, but I'd look on the manufacturer's website to see if there's a 10.5 compatible driver available.

2nd Laptop causing Syncing Problem between iPhone, Address Book, and Google

I sync my iPhone with my Macbook Pro at home, which allows me to sync my Address Book with Google. However, since buying a Macbook Air and syncing everything via MobileMe, I no longer can sync with Google. I think I could solve this problem with syncing my iPhone with my Macbook Air, but I don't want to (all my media is on the Pro).
Since Address Book isn't allowing my to sync with Google, several problems have manifested:
• iChat no longer shows any of my friends (if I try to manually add them they simply show as "off-line" even when they're not).
• Google Chat no longer shows any of my friends
AIM still works fine in iChat, so this is definitely a Google-Address Book problem.

Never received help, so I gave up.

Problem between (10.9) Mavericks and Photosmart Premium C310 series with the scan(ner)

Hello,
I have a serious problem with my Photosmart Premium C310 series with the scan(ner). I get a black image with white stripes (or an error 30) when I save my picture or my document on Mavericks (Mac OS X 10.9) installed yesterday.
With Moutain Lion all was OK.
My HP Scan is 2.4.3
Model name : CN503B
Serial Number : {Private Information Removed}
An update is planned as soon as possible ?
Thanks in advance.
Valorisa

Hello
Can you please advise what software you are using to scan ? HP Scan app or Image Capture or Preview ??
I think you are using HP Scan app, yes ?
Did you know you can also scan using Preview or ImageCapture ? You might try this as a test. Make sure printer is turned on and available on same network as your Mac.
Open up Apple's Preview app from your dock. Under File menu, select "Import from scanner", you may have to do this twice to get printer to show up. You should get a scan dialog window with many options to help you scan and save the file.
Please let us know if this works, I'd like to know if the issue is with the HP scan software or something else.
If this reply helped you, please say thanks by clicking the blue Kudos star.
I am an HP employee

Competition problem between Windows 8.1 and Windows 7 on Photosmart C5180 connected via LAN

Hello everyone, I am writing because I need some advice / help on a problem last night while configuring a small network.
The network is made up as follows:
2 notebook: Windows 8.1 and Windows 7
3 different printers:
2 USB connected to the respective notebook,
1 HP Photosmart C5180 network printer connected via LAN via a router.
The situation is the following:
both notebooks recognize the various printers and are able to send and print documents but,
when the print command starts from both notebook SIMULTANEOUSLY or at a distance of a few seconds, the only document printed is ALWAYS the one sent from the notebook with WINDOWS 8.1. The other one submitted by WINDOWS 7 IS LOST without being reported.
So if I ask of you is someone experienced in the print queues, print drivers, competition in the print jobs that can help me in solving this problem.
Thanks in advance

Hello cesco,
Welcome to the HP Forums.
I see that you are having a communication issue when attempting to print on two separate printers at the same time.
This will be a communication issue for sure. The computer can only send to one printer at a time. You will have to print to one printer, wait for it to finnish the print job and then send it to the other printer.
There is no way that you can print from one computer to two separate printers at the same time.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Performance problem between Oracle.DataAccess v1 and v2

Hi, I have serious performance problem with OracleDataReader when I use the GetValues method.
My server is Oracle 9.2.0.7, and i use ODAC v10.2.0.221
I create a dummy table for benchmark :
create table test (a varchar2(50), b number)
begin
for i in 1..62359 loop
insert into test values ('Values ' || i, i);
end loop;
commit;
end;
I use the same code for benchmark Framework v1 and Framework v2.
Code :
try {
OracleConnection c = new OracleConnection("user id=saturne_dbo;password=***;data source=satedfx;");
c.Open();
go(c);
c.Close();
catch (Exception ex) {
MessageBox.Show(ex.Message);
private void go(IDbConnection c) {
IDbCommand cmd = c.CreateCommand();
cmd.CommandText = "select * from test";
cmd.CommandType = CommandType.Text;
DateTime dt = DateTime.Now;
IDataReader reader = cmd.ExecuteReader();
int count = 0;
while (reader.Read()) {
object[] fields = new object[reader.FieldCount];
reader.GetValues(fields);
count++;
reader.Close();
TimeSpan eps = DateTime.Now - dt;
MessageBox.Show("Time " + count + " : " + eps.TotalSeconds);
Result are :
Framework v1 with OracleDataAccess 1.10.2.2.20 "Time 62359 : 0.5"
Framework v2 with OracleDataAccess 2.10.2.2.20 "Time 62359 : 3.57" FACTOR 6 !!!!!
I notice same problem with oleDb provider and Microsoft Oracle Client provider..
It's a serious problem for my production server, the time calculation explode...
Where is the explication ?
Do u know solution ?

Can you please try out following -
1. Create a .NET 1.x DLL with your benchmark code. This will obviously use ODP.NET for .NET 1.x.
2. Call this assembly routine from a .NET 1.x executable and note the results.
3. Now call this assembly routine from a .NET 2.0 executable and note the results.
The idea is to always use "ODP.NET for .NET 1.x" even in .NET 2.0 runtime. This will tell us whether the performance degradation is a runtime issue.

Synchronization problems between Logic Pro 8 and Roland's groovebox MC-909

Hi everybody,
I recently purchased a (used) Roland MC-909 and tried to synchronize it with Logic but the whole procedure seems too complicated.
Logic gets digital audio input (S/PDIF-RCA) from the MC-909 (through M-audio Fast Track Pro) and I've tried all shorts of adjustments (e.g. connecting Logic's MIDI out (through M-audio Fast Track Pro) to Roland's MIDI in port and the opposite with different master/slave setups etc.).
I can't get these two to synchronize.I suppose there is a logical solution for everything,but I'm really running out of patience...
I want to use Logic Studio to internally record Roland's (synchronized!!) audio output,avoiding sampling patterns from Roland and then transferring them to Logic (import audio file).After that,I would like to use these two combined in a live set.
I hope there are people out there having faced similar problems in the past...share any bit of useful info please..
Thanks everybody!
Mario,Greece

MIDI Out from Logic via the M-Audio interface.
In Logic's synchronization setup, be sure "Transmit MIDI Clock" is enabled and the port is selected.
In the Roland, set clock to external/slave, you may have to press play, the unit should now wait for, and sync to MIDI clock from Logic.
caveat... I don't have a Roland unit, but this way ---should--- (hate that word) work.
pancenter-

Problems between Macbook pro retina and CS6

Hi, the problems with the macbook pro retina and CS6 are solved? problems with the pixelated interface in PS, InDesign, Illustrator...
Thanks

Photoshop and Illustrator with their latest patches are compatible with retinal displays. InDesign CS6 is not and never will be compatible. You'll need CC for that.

Interop problem between brocade 300d/200e and MDS 9509

Similar Messages

Maybe you are looking for