Interoperability between MAR3200/WMIC C3205 and APC OmniAccess 4302 V2.5.3

Hi,
I perform interoperability test with a partner between a MAR3200 fitted with a WMIC C3205 and a APC OmniAccess 4302 running a V2.5.3 release. The association is not done.
The WMIC generates an association request including the tags 0, 1, 133, 149 and 221. The APC association response includes only tags 0 and 1. I noticed that the association response provided by a Cisco WLC 2006 includes tags 0, 1, 133, 149 and 221 (See attached files displaying Airopeak traces).
Does the WMIC need the 3 tags to associate? Could any of these tags be optional or at least a few fields in a tag?
Best Regards,
Alain-Claude

Hi,
The message displayed by the WMIC is the following:
%DOT11-4-CANT_ASSOC: Interface Dot11Radio0, cannot associate: no wpa-v1 v2 chk needed
I need urgently some information because tests are stopped until the association is not possible.
Any link or contact would be appreciated.
Best Regards,
Alain-Claude

Similar Messages

  • Choose between a JSPDynPage, DynPage and APC

    Dear All,
    How can I choose between a JSPDynPage, DynPage and an APC?
    Kindly some one tell me what are the advantages and disadvantages of one over the other?
    Regards,
    SrinivaS

    Hi,
    thanks a lot for the reply. Solved. Blog is really very helpful.
    Regards,
    SrinivaS

  • Interoperability between Cisco Nexus 5548UP and IBM FC3171

    Dear Techies,
    We have a Cisco Nexus Switch 5548UP already in our environment with DS-SFP-FC8G-SW installed. We are planning to procure IBM Pure Flex Chassis without FC Switch, since we already have Nexus that can provide this facility. But in order to connect IBM Flex with Cisco Nexus we are planning to use IBM FC3171 Switch with IBM 44X1964 Transceivers which will act as a Mediator/Pass Through Switch for connecting IBM and Cisco.
    If any expert knows OR have used this scenario, please let me know since I am interested to know if it will work in this scenario or not.
    Regards,
    Farhan.

    Dear prkrishn
    I am working on the Data Center Solution between two Data Center, details underneath
    DC 1 Site
    1. 2 x DC Core Switch (Nexus 7009) - will be used for Servers, Application, IBM V7000, Database, etc.
    2. 2 x Network Core Switch (Cisco 6509) - Handle Campus and Inter Building connection.
    3. IBM V7000 (SAN)
    DC 2 Site
    1. 2 x DC Core Switch (Nexus 7009) - will be used for Servers, Application, IBM V7000, Database, etc.
    2. 2 x Network Core Switch (Cisco 6509) - Handle Campus and Inter Building connection.
    3. IBM V7000 (SAN)
    With the above mention setup, can I configure FCIP between DC1 & DC2 using Nexus 7009? or I need FCIP capable Switch such as IBM SAN Switch (SAN06-BR), I was wondering if I can configure FCIP on Nexus 7009 DC Switch.
    Hoping for your kind response at earliest.
    Kind Regards,
    Arnold

  • Interoperability between apache soap toolkit(client)and ms soap toolkit

    Interoperability between apache soap toolkit(client)and ms soap toolkit.Give me an example where i can send and receive a complex data type from apache tomcat in client side to ms soap toolkit on the server side.It is urgent.Plz try to give me a solution as soon as possible.

    The toolkits don't have to work together at all. And by the way, you aren't sending the data to the MS toolkit, you're sending it to some MS product that can process the data. Any data that follows the standards should work.

  • WMIC C3205: radio link break due to lower data rate

    Hi,
    I use a WMIC C3205 within a MAR3200 as workgroup bridge in a test bed environment. The other side of the radio link is made of LAP 1242AG controlled by a WLC2006. Only one AP is used for the time being and the link test results provide RSSI around -40dB.
    Once the WMIC is associated, messages listed below are displayed when data traffic is started (IP camera, IP traffic generator).
    When the WMIC is running the release 12.3(2)JL3, following traces are displayed once:
    *Mar 1 00:19:18.873: %DOT11-4-UPLINK_DOWN: Interface Dot11Radio0, parent lost: Had to lower data rate
    *Mar 1 00:19:21.950: %DOT11-4-UPLINK_ESTABLISHED: Interface Dot11Radio0, Associated To AP tdst_01_ap1 0018.74fb.e75f [None]
    The link break duration is around 3s. When the WMIC is running the release 12.3(2)JL1, the same events occurred every 9s, but the link break duration is less than 200ms.
    Does anybody know the source of this behaviour?
    Best Regards,
    Alain-Claude

    Hi Sandesh,
    Thanks for your answer. Normally, no other wlan are using the selected channel, but I will check again. My surprise is also coming from the unlike behaviour depending on the software release. I work still on this problem and will let you know.
    Best Regards,
    Alain-Claude

  • JMS Interoperability between vendors

    Hi,
    I have been tasked with providing a number or proposals for connecting our enterprise to a number of external partners via a queueing mechanism. i.e. a B2B hub.
    I am pretty familiar with JMS, but concerns have been voiced over the interoperability between vendors; something I have no direct experience of.
    For example as part of my proposal I may suggest that we send out messages to JMS servers hosted on the partners sites. These partners use a variety of technologies including WebMethods, BizTalk, IBM etc. which we can assume all support JMS (including IBM MQ as I have been told).
    Has anyone ever come across interoperability issues with regards to JMS? If I send out JMS messages from one vendor will they be seamlessly received by the target vendors JMS server?
    Any shared experience would be appreciated.

    Hi Joe,
    Thanks for your response. The thing is that this refers to SOAP over JMS, i.e. JMS is the underlying transport protocol not SOAP which brings me back to the original problem interoperability of JMS vendors.
    In fact the specification (taken from your first link) states:
    "It does NOT provide any mechanism for interoperation between two different JMS providers. In the example above, VendorA and VendorB are different providers of a Web services infrastructure, but the customer must still use a single implementation of JMS at both client and service side."
    However your input has highlighted something I was unaware of; that is that there are also interoperability issues within SOAP between different vendors. This is dissapointing; I assumed that SOAP worked without any interoperablity issues whatsover.

  • What is the difference between JSR 168 portlets and WSRP portlets?

    What is the difference between JSR 168 portlets and WSRP portlets?

    Here is the difference between JSR168 and WSRP:
    The WSRP specification does not make any statements as to implemention. Java's portlet specification, JSR 168, and WSRP are not competing technologies. JSR 168 may be used to define a portlet, and WSRP may be used to define a portlet's operations to remote containers. JSR 168 portlets and WSRP may be used together to define a portlet and to provide remote operations. Similarly, .NET portlets may be created for use with WSRP. Interoperability between JSR 168 and .NET WSRP implementations has been demonstrated

  • What is the difference between periodic asset postings and depreciation pos

    Hi,
    What is the difference between periodic asset postings and depreciation postings in asset accounting.
    Regards, Naresh Yadav

    ASKBN or ASKB : Periodic asset posting will update acquisition and depreciation in depreciation area other than area 01 which are maintained as post "APC and depreciation on periodic basis" by using ASKB or ASKBN
    Separate set of GL accounts will be used for ASKBN.  You can run ASKBN or ASKB as and when you need it and not necessarily nonth end
    AFAB : To post a book depreciation at every period and  this activity usually every month end  which posts depreciation 01 Book Depreciation and other areas maintained as realtime at OADB
    Srinivas

  • Possible to segment traffic between 2 interfaces? And other questions...

    I would like to set my G5 up as a server utilizing a second connection and to keep traffic seperated between this server connection and my regular internet connection (would be wireless). I'm pretty sure this alone is fairly straightforward and can be accomplished by setting up the new interface and moving it down to the bottom of the connection list with wireless at the top. That should keep all non-specific traffic from flowing out the ethernet/server connection - I think.
    If the above works the way I stated then I would also want to firewall ONLY the ethernet/server connection (the wireless has it's own hardware firewall). AND - this is the tricky part - I also want to add a fake interface that has a fake IP and bind that to the "real" ethernet/server connection. The reason for that is because I need a static IP to bind the service to. I know if the connection list thing works to flow the traffic that if I had an external router on the server connection, this wouldn't be needed. I'd already have a fake IP to bind to and I wouldn't have to run the firewall on the Mac. But I don't and I'd rather not have to buy one.
    So can this be done through the network/sharing preferance panes? If so, are there any "gotchas" I should be aware of? If not, is there any software tool out there that would make setting this up easier/faster? I'm not opposed to doing it all via command line, but I'm a bit rusty with my linux/unix admin knowledge. Plus I'm not 100% certain how to set all that up command line wise without screwing up OS X!
    Thanks.

    I'm not sure I fully understand what you are attempting to accomplish. Lets see if I have the general idea.
    You have a single G5, that you want to use as both your desktop machine and also to provided specific services, such as web, email, etc.
    You have some type of hardware firewall/security appliance.
    You have some type of wireless access point.
    You don't seem to have any type of router or switch in your configuration.
    You want all of your server based traffic to be sent and received on it's own Ethernet port. You want your personal Internet traffic to be sent and received on your wireless connection.
    So my questions are:
    Where is the server traffic going to, coming from? Who is accessing the server, is it users on the Internet, or just computers on your own LAN (which you didn't mention).
    If your server is to allow data from or send to the Internet, then you need to have a way to route the traffic there. Do you have more then one method to access the Internet, or will all traffic, both personal and server being going though the same Internet access pipe?
    If it is all going through the same pipe, and you only have the single computer, I don't understand why you wish to segment the traffic.
    If on the other hand you have multiple computers on your LAN. then segmenting traffic may make sense. This would allow access to your server and keep your LAN well secure.
    Anyway, to get to specifics, you'll need to use the terminal app to bind specific services to specific IP's and ports on your Mac. You will also need to manually configure the firewall to be able to select specific connection ports and bindings. However, while I think it can be done, I'm not sure it makes a great deal of sense.
    I would be more inclined to suggest a router or switch that can provide VLAN support, or a router that provides true DMZ support, would be a good way to go.
    Anyway, a little more info would be helpful.
    Oh and if I have this totally worng in what I think your doing.. My mistake.
    Tom N.

  • Error while adding a used relationship between the New DC and the Web DC

    Hi Gurus
    We are getting the Error in NWDS while Adding  a used relationship between the New DC and the Web DC.
    Steps what we are Done
    1. Create the custom project from inactiveDC's
    2.creating the project for the component crm/b2b in SHRAPP_1
    3.After that we changed the application.xml and given the contect path.
    4.Then we tried to add Dependency to the custom create DC we are getting the error saying that illegal deppendency : the compartment sap.com_CUSTCRMPRJ_1 of DC sap.com/home/b2b_xyz(sap.com.CUSTCRMPRJ_1) must explicitly use compartment sap.com_SAP-SHRWEB_1 of DC sap.com/crm/isa/ like that it was throwing the error.
    so, we skip this step and tried to create the build then it is saying that build is failed..
    Please help us in this regard.
    Awaiting for ur quick response...
    Regards
    Satish

    Hi
    Please Ignore my above message.
    Thanks for ur Response.
    After ur valuble inputs we have added the required dependencies and sucessfully created the projects, then building of the  projects was also sucessfully done and  EAR file was created.
    We need to deploy this EAR file in CRM Application Server by using the interface NWDI.
    For Deploying the EAR into NWDI, we need to check-in the activites what i have created for EAR. once i check-in the activites ,the NWDI will deploy the EAR into CRM Application Server.
    In the Activity Log we are able to check the Activities as Suceeded but the Deployment column is not showing any status.
    When i  right click on my activity Id the deployment summery is also disabled.
    So finally my Question is that where can i get the deployment log file, and where can i check the deployment status for my application..
    Any pointers in this regard would be of great help..
    Awaiting for ur valuble Responses..
    Regards
    Satish

  • The difference between VGA, DVI-D and ADC?

    Hi.
    The difference between VGA, DVI-D and ADC and which should be used with a T244 widescreen monitor into a Quicksilver G4 with a GeForce2 MX nVIDIA (0x10de) card. What's a good upgrade card if the above is not good enough?
    Thank you for your input.
    Walter

    Look at this link http://en.wikipedia.org/wiki/DigitalVisualInterface
     Cheers, Tom

  • The difference between AIR-ANT5135D-R and AIR-ANT5135DB-R

    Hi,
    Anyone know what is the difference between AIR-ANT5135D-R and  AIR-ANT5135DB-R ?
    From the dynamic configuration tools for 1252 and 1242, AIR-ANT2422DB-R is inside one of the antenna option.
    However, I can't find it in the "Cisco Aironet Antennas and Accessories Reference  Guide"
    http://www.cisco.com/en/US/prod/collateral/wireless/ps7183/ps469/product_data_sheet09186a008008883b.html
    Inside the document there is only AIR-ANT5135D-R.
    likewise for the 2.4 GHz,  AIR-ANT2422DB-R is inside the dynamic configuration tools and not inside "Cisco Aironet Antennas and Accessories Reference  Guide"
    Any help would be appreciated
    Thanks,
    Richard

    Found the difference, AIR-ANT5135DB-R and       AIR-ANT2422DB-R are  non-articulating antennas.
    Thanks!
    Richard

  • The difference between Telepresence Content Server and MSE 3500

    Good day! Could someone explain me what's the difference between Telepresence Content Server and MSE 3500? Why do I need to obtain two these devices for sorting out my tasks? I want to understand gist of the first and the second devices.

    In addition to what Jonathan posted above, here is a Capture Transform Share Solution Guide that goes over a little bit of what the TCS and MXE are and some possible deployment scenarios.
    In short, TCS is used to record video conferences or lectures that can be streamed on demand or live using various streaming or distribution methods.  One such distribution method is using the MXE 3500 to ingest the recordings from TCS and convert them to different media types and add in-video content such as logos etc.  However, from the MXE, you can't send the video back to the TCS for viewing, you'd need to send that off to another viewing portal such as Show and Share.

  • The difference between SSO/NSF(GR) and NSR

    Hello
    I have question about the differnce between SSO/NSR(GR) and NSR.
    In my understanding SSO/NSR is stateful switchover from Active to Backup
    Mainly take over teh startup configuration and FIB TCAM table and so on.
    But this protocol need to re-establish the routing table and topology database etc.
    But if NSR functions when stateful switchover happens then it takes over routing table
    and toplogy database etc. right? 
    If so, I think BGP peer down/up (flapping) , OSPF/EIGRP neighbor state change does not happen right?

    ITS is used for accessing R/3 through browser....to implement SSO from Portal to access backend R/3 systems over ITS you need to follow certains step ...
    1. Create RFC Destination in J2EE Engine RFC JCo Provider
    2. Create RFC Destination in the R/3   Transaction: SM59
    3. Maintain Portal Server Settings for the Portal
    4. Maintain Single Sign-On in the R/3 System
    5. Export  R/3 Certificate to the Portal System
    6. Import  R/3 Certificate to the Portal
    7. Create  R/3 System in the Portal
    8. Configure User Management in the Portal
    9. Export Portal Certificate from Portal
    10. Import Portal Certificate to the R/3 System
    11. Set Up Repository Manager for R/3 in the Portal
    12. Maintain User management as SAP Logon Ticket in the Portal
    Hope I have answered your query in proper way.......
    If you want step by step details pl s let me know
    Swapnil

  • RFC connection error between BW 3.5 and ECC 6.0

    Hi gurus,
    We've defined an RFC destination between BW 3.5 and ECC 6.0. Connection test  (SM59) is ok, but authorization one fails and ALEREMOTE users block. These users on both systems have good profiles. We look ST22 and find a runtime error on CALL_FUNCTION_REMOTE_ERROR. We've cleaned source system on BW and RFC destination and we've created one more time, but error doesn't disappear. We've looked OSS but don't find anything.
    Any idea? Is there any other place (users, RFC) where we have to change user password on system?
    Thanks a lot!
    Regards,
    Iván.
    Edited by: Iván Cabezas Castillo on Nov 6, 2009 12:09 PM

    Solved!
    This is because of the incompatibility of password handling between
    640 and 700 systems.
    We have to use a maximum 8 character long password with only capital letters (numbers are also allowed) for the user "ALEREMOTE".
    1. Change the password for the user in SAP R/3.
    2. Maintain the password in SAP BW for the RFC destination (transaction SM59 - Logon/Security tab)
    3. Authorization test is now successful.
    (SM59 - Test - Authorization).
    Regards!

Maybe you are looking for