Interpreting the Check Effective Rights Category Permission - Project Grid

I am seeking clarification - I was advised that a user could not access projects so I checked their Effective Rights and noticed a RED cross against the Project Heading at the top of the list of rights for the Category Permission - Project when I selected
any project in the drop down list.
I assumed that a RED Cross at the very top indicated an Overall Block on those permissions, however using Delegation as the afflicted user I found that I could do things that they had reported they were unable to do.
There was one permission that had been removed - PWA Permissions "Delete Project" which I reinstated and this resulted in there being a Grey Cross at the Project heading for the list. Reinstating this did not appear to enhance the users permissions
and reinstating it did not appear to diminish them. The only evident difference being the RED cross against the Project Heading at the top of the list of rights for the Category Permission - Project when any project was selected.
Looking at permissions when a person belongs to more than one security group and there is an allowed permission for one group and a not allowed permission for the other group the permission level itself tends to show a grey cross in such circumstances so
in effect green ticks are negated by red crosses at the group level when viewing the permission level that they are listed beneath.
Am I right to assume that this RED cross simply indicates that at some point there is a permission that is denied?
Dominic Moss | MAPM Microsoft Certified Technology Specialist | Our Newsletter:
PM News Project Server Specialists
Project Server PRIME | Twitter:
@Twitter | Facebook:
@Facebook | Linkedin:
Wellingtone

I have investigated a bit further and from what I can deduce if there is a Red Cross at the Project level in the Category
Permission - Project list it would appear that it is simply indicating that there is a Deny or Unavailable permission at some point in the list. Can anyone confirm this?
Dominic Moss | MAPM Microsoft Certified Technology Specialist | Our Newsletter:
PM News Project Server Specialists
Project Server PRIME | Twitter:
@Twitter | Facebook:
@Facebook | Linkedin:
Wellingtone

Similar Messages

  • After Effects CS6 Missing 'Template Projects'

    Hello,
    The following support page identifies the problem...
    Library, title templates, template projects missing: Premiere Pro, After Effects, Encore
    • When you access the template projects in After Effects CS6 or CC, the template projects are missing.
    After Effects Solution: Download and install content from the Adobe After Effects Exchange
    Here is the link provided by above solution....
    https://creative.adobe.com/addons
    However, there does not appear to be any After Effects 'Template Projects' posted at the Add-ons site.
    This help page provides a description of the missing content...
    After Effects Help | Projects
    Could someone please identify where I can download these files from.
    Thanx.../John

    Hi Todd,
    There is still no solution to the After Effects CS6 Missing 'Template Projects'.
    Could you please post this requested content and provide a link.
    .../John

  • In Encore I get an error in the check project window of "can't execute end action because of final chapter marker"

    I have imported a project to Encore and while it worked the first time, this time I get an error in the check project winder of can't execute chapter 2 end action because of final end marker?  I have two different sections that have buttons on the menu.  When you get to the end of the first sequence I need it to go back to the menu and it is saying that it can't because of the end action on the final marker.

    The 'unable to locate' message means that you don't have those music files on that computer, or that they are not where iTunes is expecting them to be. How did you get the entries for those tracks in your new computer's iTunes ?
    If you still have your old computer then you can try copying them over again : http://support.apple.com/kb/HT4527
    You may also be able to re-download them from the store (checking for available downloads only checks for items that have not yet been downloaded, not for past purchases) via the Purchased link under Quick Links on the right-hand side of the iTunes store home page (re-downloading music isn't possible in all countries). You may need to delete them form your library first (where you are getting the 'unable to locate' message), otherwise iTunes will assume that you still have them somewhere and won't let you re-download them.
    Re-downloading : http://support.apple.com/kb/HT2519

  • Can i export an Imovie project with special effects as a quick time movie then import into final cut express keeping the special effects?

    Hi, Can i export an Imovie project with special effects as a quick time movie then import into final cut express keeping the special effects?

    Absolutely.  Go to File->Export->QuickTime Movie (do NOT use QuickTime Conversion).  Make sure you check the Self-Contained box.  The export will be an exact copy of your Sequence, complete with any filters or other effects you've added.  Import the self-contained movie back into the project (or another project) if needed.
    -DH

  • I HAVE COMPLETED SEVERAL IMOVIES AND FINALIZED JUST FINE.  NOW I GET THE FOLLOWING MESSAGE FROM MY LATEST PROJECT.  "The project could not be prepared for publishing because an error occurred.  (File already open with write permission)"!  What is going on

    I HAVE COMPLETED SEVERAL IMOVIES AND FINALIZED JUST FINE.  NOW I GET THE FOLLOWING MESSAGE FROM MY LATEST PROJECT.  "The project could not be prepared for publishing because an error occurred.  (File already open with write permission)"!  What is going on?

    Hi
    Error -49 opWrErr  File already open with write permission
    Trash the preference files while application is NOT Running.
    Easiest way to find out if this is the problem is by:
    • Create a new User-Account
    • Log out of Your old one and into this
    • Re-try iMovie
    If it now works OK - then 99.9% the problem is iMovie pref. file that needs to be trashed.
    from Karsten Schlüter
    Some users notice on exporting larger projects from within iMovie that this operation is aborted with an 'error -49'
    This issue occurs only on MacOs machines using 10.7x
    try switching-off the Local Mobile Backup
    in Terminal copy/paste
    sudo tmutil disablelocal
    Re-launch Mac
    Yours Bengt W

  • I try to export my Imovie and I always get the error code"Unable to prepare project for publishing...File already open with write permission"  it even does it when I am just trying to export to my external hard drive to save the file

    I try to export my Imovie and I always get the error code"Unable to prepare project for publishing...File already open with write permission"  it even does it when I am just trying to export to my external hard drive to save the file

    Thanks!!! I had same error (with -49) and the mac had an external hard drive attached.. and it was doing a backup.  Stopped, disconnected and the project exported!

  • The check number does not appear on the top right hand corner of check

    Hi
    Friends,
    I posted an Invoice (FB60) and did payment through F110, But cheque no. is not displayed, when i have given print preview/print. or T.code SP01.
    My configuration is correct in FBZP say....
    1. Payment methods in company code ZLF_PRENUM_CHEC1
    2. Payment method in country ZF110_US_AVIS
    (Q) How to get the cheque no. When I do invoice and payment?
    (Q) The check number does not appear on the top right hand corner of check as it should in the print check layout and does not appear in the check number box?
    Anil

    Go to this address: http://mycroft.mozdev.org/search-engines.html?country=AU
    Item 24 lists 3 installable major search engines for Australia.
    You can also restrict your search in Google by including ''country:au'' or ''location:au'' or ''city:perth'' (for example) in your search terms. Example: ''city:sydney plumbers'' in the Google search box will list plumbers in cities named sydney.

  • "Check that you have permission to write to the library directory." I had this error pop up when trying to access a iPhoto Library from Finder.

    The error, "Check that you have permission to write to the library directory." Displayed after trying to access a iPhoto Library from finder. The file is located on the local hard drive and was accessed not 5 minutes before the error displayed. Upon searching the forums I found a similar problem and the instructions said to check a permission box in the "Get Info" tab. There was no box visible and after clicking the arrow to open the "Open With" tab, the rainbow wheel started to spin and I could no longer access Finder or the desktop. I was deleting files trying to make space on my hard drive and noticed as I was deleting files more data was being added to the iPhoto Library. My question is how can I fix this and how can I prevent this in the future, thank you very much for any help, I would really like to keep these pictures.

    I found a similar problem and the instructions said to check a permission box in the "Get Info" tab.
    This applies only when the Library is on an external drive. You cannot ignore permissions on the system drive.
    I was deleting files trying to make space on my hard drive
    What were you deleting?
    and noticed as I was deleting files more data was being added to the iPhoto Library.
    Hard to see how deleting files can add data to the iPhoto Library. Can you explain why you thought this?
    I would really like to keep these pictures.
    Make a back up now.
    Most Simple Back Up:
    Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
    Slightly more complex: Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically.
    Example of such apps: Chronosync - but there are many others. Search on MacUpdate or the App Store

  • My Final Cut Projects folder were missing some files, I went to my time machine backup to restore and it said I don't have permission to access the time machine folder "Final Cut Projects". Why?

    My Final Cut Projects folder were missing some files, I went to my time machine backup to restore and it said I don't have permission to access the time machine folder "Final Cut Projects". Why?

    Yes, I've done all "the ususal suspects.." repaired permissions, zapped pram, "reintroduced Time Machine to the backup drive by turning it off and on... etc

  • Change Default resources Assignment Owner in Project Professional, in the checked-out Enterprise Resource Pool?

    Hi,
    i'm not able to change the default Assignment Owner (massive) in the Checked-out Enterprise resource pool in Project Professional 2013.
    I've also unlocked the "Windows account edit" in the Register Editor.
    Do you know if is this possible or i have to change it for each resource one by one???
    Thanks
    Best regards 
    Daniele
    Daniele

    Hello Daniele,
    I think what you are seeing is by design behavior. Per below article you can set the Default Assignment owner in Project Web Access and it appears in various places in Project client.
    http://office.microsoft.com/en-in/project-help/default-assignment-owner-resource-field-HA010167482.aspx
    If you want to set the same default assignment owner for multiple resources then you can try bulk edit option in resource center.
    Hope this helps.
    Thank you,
    Kiran K.

  • Metadata and the After Effects Project Link

    Here's one that could be very useful - when I render, I always leave the Project Link choice turned on. That way, if I lose track of the project I created the output from, I can always open the clip from within AE, choosing Project, and it finds the project based upon the embedded link. Great so far...
    What I want to be able to do is view the Metadata on the Project Link within Bridge, or in something else which will view Metadata, so that I don't have to open the clip in AE as a Project, then shut it down and open the project in the regular way, since opening as a project collapses the whole project into a folder, which I find inconvenient. Does any of this make sense? The Project Link has to live somewhere in the Metadata, but poring over it in Bridge, I have yet to find the project name anywhere in the "usual" Metadata. I assume the Project Link must be embedded, since there are no sidecars in my AE folders. Thanks...
    Joe Bourke
    Owner/Creative Director
    Bourke Media
    [link removed]

    Mylenium -
      I found the information I needed - this is a huge one for me, since I organize all of my projects using Bridge - I just discovered that in Bridge, if you go into the XMP Metadata by right-clicking the .mov file, the window which opens has a Tab view - the second from the end is Advanced. If you then roll open the Schema entry, under creatorAtom:aeProjectLink (struct), lo and behold, there sits the project name with the full path!
    This is huge, in terms of being able to pinpoint the project which created the final output on my system.
         Joe Bourke
         Bourke Media

  • How do I apply effects equally to the left and right channels.

    I am an intermittent user of Sound Track Pro. I've made some cool audio beds with it in the past but right now I'm having two problems since I have not used it in so long and never was pro with it to begin with.
    1. Seems like the lift and stamp tool only works in multi-track mode and not in the wave editor.
    2. so I put my file in the wave editor to redo the effects from scratch there but now I don't know how to apply them equally to the left and right channels.

    Thank you! One more question: I've got quite a bit of interview tape and would like to increase the playback speed to 1.5X or 1.75 x so that I can get through everything faster. Is there a way to set it at those tempos? I only see the 2X, 4X, 6X, etc. options, but these are too fast and I can't understand what is being said. Is there a way to set this to 1.5X the original speed?
    Thanks!

  • Not the right category but........

    I know this not the right category, but I've talked to many here about the free program MPEG streamclip. I have a friend who has a Koadak HD zI8 camcorder and is unable to edit the .MOV files using anthing else, other than the Koadk software that he doesn't like.
    He would prefer to use Windows Movie Maker (ya, I know), which takes WMV files as well as AVI files.
    Does anyone know if MPEG streamclip for a PC will work for this scenario?
    Thanks a bunch in advance!

    Well I got this to work using a poop quality setting, which was DV/DVCPRO-NTSC but this was not HD or widescreen. Doesn't MPEG Streamclip have a setting that will preserve a little more quality and work on a PC since it works on a PC???
    Thanks,

  • Cp 8 - How to add ppt slides to an existing project with space to the left and right ?

    After much trial and error, i know exactly what I want. The priority for me is clear and unscaled captured video, and my project resolution shall be 1260x700. 
    now, i want to bring my ppt slides in and respect the aspect ratio- this means that there will be blank space to the left and right of the slides. The active area of the ppt slide should be about  700 h and 4/3 * 700 width. To avoid scaling, i would love them to be 699 x 932 and have the areas to the left and right blank. i am also willing to make my project 1260x702.
    The objective here is to avoid scaling. I have seen that things look great when scaling is avoided.

    Maybe you'll find some ideas here: Create and Use a "Knockout" Master Slide - Captivate blog

  • Is this the right category for HR Technical ppl?

    Hi All,
    I am new to this forum and new to SAP as well.
    Can anyone suggest me the right category in this forum, for HR technical knowledge?
    Please advice..

    Hi,
    SAP ERP Solution HCM as well ABAP.
    Good Luck
    Om

Maybe you are looking for