INTERRUPT process types authorization in process chain

Hi all ,
I include INTERRUPT step in one of my process chains but I'm not able to change it on live system because of unsufficient authorization .  We have sufficient authorization just for START variant on process chains on production system however we also need to have schedule authorization for INTERRUPT process since I need to schedule it several times in live system. Does anyone know about the process to gather required authorization
Thanks in advance ...

.

Similar Messages

  • Interrupt process chain 2004s

    Hi,
    We are using three process chains which trigger events at the end of them those events triggered by them get collected in event collector in BI 3.5 (RSA1->Tools->Eventcollector).After collecting all the events event collector triggers the process chain.In 2004s this feature is not there.They have added the concept of interupt process.I don't know how to use it.Please help me
    Thanks in advance!

    Hi ,
    ebent collcetor is still in BI7.0 the feature is not there but you can check it thoruhg RSA1 OLD transactiona and program se38 >>> RSABW_NEW_START ..
    This Process type helps for interrupting the processing of a process chain up to the point at which a condition is filled.
    if a process chain is only processed either in part or in its entirity if more than one start condition is filled, you use this process type to specify the additional conditions.
    The chain is started when the condition of the start process is filled. However, the interrupt process will interupt the processing of the chain (as long as its status is "active") up until the point at which the condition of the interrupt process is filled. Should the start process condition be filled again before the interupt process condition is filled, the chain will start again and will only run up until the point of interruption. As soon as the interrupt process condition is filled, the system continues the last run of the chain only. The earlier runs remain unchanged.
    interrupt is kind of a waiting time thing like we add in an infopackage or in  a process chain ..it can also be event based or time based ..
    Go to the display varaint of it .. you will find wether its event based or time based ..if the event is the check that event in se16 >> RSPCchain >>> put the event in process varaint .. you wil find from were the event is coming .. it will give you the porgram name also and the corressponding process chain too ..
    regards,
    shikha

  • Interrupt Process Chain

    Hi,
    I want to use the interrupt process in a process chain.
    I have a number of process chains that the users can trigger themselves after inputting data and running planning sequences in BI-IP.  Due to system performance, I need to run the load jobs on the system only at night, when no users are running reports.
    The problem I have is that there is no set time period for these inputs, the data depending on the KPI could be entered monthly, quarterly or yearly and on any day during the month.
    I want to interrupt the process so that if it is triggered that day, it waits until 23:30 before it executes.
    Can this be done using the interrupt process, I have tested it for a set day, so I can set it for today at 23:30 and the process will wait until then, but how to make the date dynamic?
    Thanks
    DJL

    hi
    check these links can help you.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70e59bef-3fe5-2b10-0bb5-c5c479b004f0?QuickLink=index&overridelayout=true
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30cb3053-98a0-2e10-aca3-dde5b649879a?QuickLink=index&overridelayout=true
    process type in BI
    Interrupt Process in Process chain.. pls help

  • Authorizations setting for running the process chain

    Hai
    Iam planning to run the process chain for loading the data into ODS. But i dont have authorization for it.
    so what are the authorizations i need to run the process chain in my system. And how can i set all those authorizations to my user-id.  I have all authorization rights .
    Pls let me knw
    kumar

    Hi,
    Authorizations for Process Chains
    Use
    You use authorization checks in process chain maintenance to lock the process chain, and the processes of the chain, against actions by unauthorized users.
    ·        You control whether a user is allowed to perform specific activities.
    ·        You control whether a user is allowed to schedule the processes in a chain.
    The authorization check for the processes in a chain runs when the system performs the check. This takes place upon scheduling or during synchronous execution. The check is performed in display mode. The check is performed for each user that schedules the chain; it is not performed for the user who executes the chain. The user who executes the chain is usually the BI background user. The BI background user automatically has the required authorizations for executing all BI process types. In attribute maintenance for the process chain, you can determine the user who is to execute the process chain.
    See also: Display/Maintenance of Process Chain Attributes ®  Execution User.
    Features
    For the administration processes that are bundled in a process chain, you require authorization for authorization object S_RS_ADMWB.
    To work with process chains, you require authorization for authorization object S_RS_PC. You use this authorization object to determine whether process chains can be displayed, changed or executed, and whether logs can be deleted. You can use the name of the process chain as the basis for the restriction, or restrict authorizations to chains using the application components to which they are assigned.
    Display/Maintain Process Chain Attributes
    Use
    You can display technical attributes, display or create documentation for a process chain, and determine the response of process chains during execution.
    Features
    You can display or maintain the following attributes for a process chain:
    Process Chain ® Attribute ® ...
    Information
    Description
    ( Rename)
    You can change the name of the process chain.
    Display Components
    Display components are the evaluation criterion in the process chain maintenance. Assigning the process chains to display components makes it easier to access the chain you want.
    To create a new display component, choose Assign Display Components in the input help window and assign a technical name and description for the display component in the Display Grouping dialog box that appears.
    Documents
    You can create and display documents for a process chain.
    For more information, see Documents.
    Last Changed By
    Displays the technical attributes of the process chain:
    ·        When it was last changed and who by
    ·        When it was last activated and who by
    ·        Object directory entry
    Evaluation of Process Status
    If you set this indicator, all the incorrect processes in this chain and in the overall status of the run are evaluated as successful; if you have scheduled a successor process upon error or always.
    The indicator is relevant when using metachains: Errors in the processes of the subchains can be evaluated as “unimportant” for the metachain run. The subchain is evaluated as successful, despite errors in such processes of the subchain. If, in the metachain, the successor of the subchain is scheduled upon success, the metachain run continues despite errors in “unimportant” processes of the subchain.
    Mailing and alerting are not affected by this indicator and are still triggered for incorrect processes if they have an upon error successor.
    Polling Indicator
    With this indicator you can control the response of the main process for distributed processes. Distributed processes, such as the load process, are characterized as having different work processes involved in specific tasks.
    With the polling indicator you determine whether the main process needs to be kept until the actual process has ended.
    By selecting the indicator:
    -         A high level of process security is guaranteed, and
    -         External scheduling tools can be provided with the status of the distributed processes.
    However, the system uses more resources; and a background process is required.
    Monitoring
    With the indicator in the dialog box Remove Chain from Automatic Monitoring?, you can specify that a process chain be removed from the automatic monitoring using CCMS.
    By default CCMS switches on the automatic process chain monitoring.
    For more information about the CCMS context Process Chains, see the section BW Monitor in CCMS.
    Alerting
    You can send alerts using alert management when errors occur in a process chain.
    For more information, see Send Alerts for Process Chains.
    Background Server
    You can specify here on which server or server group all of the jobs of a chain are scheduled. If you do not make an entry, the background management distributes the jobs between the available servers.
    Processing Client
    If you use process chains in a client-dependent application, you can determine here in which client the chain is to be used. You can only display, edit, schedule or execute the chain in this client.
    If you do not maintain this attribute, you can display, edit, schedule or execute the process chain in all clients.
    Process variants of type General Services that are contained in a process chain with this attribute set will only be displayed in the specified client.
    This attribute is transported. You can change it by specifying an import client during import. You must create a destination to the client set here in the target system for the import post processing (transaction RSTPRFC)  The chain is activated after import and scheduled, if necessary, in this client.
    Execution User
    In the standard setting a BI background user executes the process chain (BWREMOTE).
    You can change the default setting so that you can see the user that executes the process chain and therefore the processes, in the Job Overview. You can select the current dialog user who schedules the process chain job, or specify a different user.
    The setting is transported.
    The BI background user has all the necessary authorizations to execute all BI process types. Other users must assign themselves these authorizations so that authorization errors do not occur during processing.
    Job Priority
    You use this attribute to set the job priority for all of the jobs in a process chain.
    Hareesh

  • Monitoring process chains: authorizations

    Hi,
    We have an issue about monitoring of BW process chains.
    We have a support desk in our IT department doing first-level support on basically all our it systems.
    The support desk have only limited SAP knowledge (they can do simple things like unlocking users, etc.).
    Currently our BW developers are also responsible of day-to-day monitoring of BW process chains.
    We would like to move this task to the support desk.
    The support desk will be responsible of identifying problems and maybe doing simple corrective actions (restarting a process chain?).
    In case of "real" problems the support desk will hand over the issue to our BW developers.
    We have tried to create a role giving access to transaction rspcm for the support desk.
    But we have not been able to restrict the authorizations.
    From rspcm it is possible to go into process chain maintenance, and we would like to make sure that no one makes changes to the process chains by accident.
    We would like to have a role giving "display only" access to monitoring process chains.
    Anyone with experience in doing this?
    /Casper

    Hi Vijay,
    We have tried adding only the transaction RSPCM (object S_TCODE) and the object S_RS_ADMWB as suggested by you.
    The problem is that when "clicking" on a process chain in transaction RSPCM authorizations for transaction RSPC is required.
    We have then added transaction RSPC to object S_TCODE.
    When displaying the process chain, the user is not able to maintain info packages (this must be controlled by S_RS_ADMWB?).
    But the user are still able to maintain the other process types (attribute change run as an example) ???
    Are we missing another auth.object?
    Best regards,
    Casper

  • What are the varoius type of process chain errors how we can solve them.

    Hi,
    I  need to work with process chains maintainace , Can any body tell me what are the different type of process chain errors generelly we used to get ,how we can solve them . IF possible  please provide me any document also  so that i can solve my
    abnormal problems for process chain errors.
    Thanks in advance .

    Hi,
    1) Invalid characters while loading: When you are loading data then you may get some special characters like @#$%...e.t.c.then BW will throw an error like Invalid characters then you need to go through this RSKC transaction and enter all the Invalid chars and execute. It will store this data in RSALLOWEDCHAR table. Then reload the data. You won't get any error because now these are eligible chars done by RSKC.
    2) IDOC Or TRFC Error: We can see the following error at u201CStatusu201D Screen:Sending packages from OLTP to BW lead to errorsDiagnosisNo IDocs could be sent to the SAP BW using RFC.System responseThere are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of the SAP BW.Further analysis:Check the TRFC log.You can get to this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".Removing errors:If the TRFC is incorrect, check whether the source system is completely connected to the SAP BW. Check especially the authorizations of the background user in the source system.Action to be taken:If Source System connection is OK Reload the Data.
    For more errors and solutions go thorugh the link below
    http://indelasap.blogspot.com/2009/04/sap-bi-production-support-issues.html
    Regards,
    Marasa.

  • Authorization for Process Chains in BW 3.5 (2004)

    Hi all,
      I wanted to know if there is any way to limit actions on process chains.  I would like to give some users display only access to process chains.  Is that possible?
    Thanks

    Hi,
    In your system go to
    'Transport Connection' tool-->
    Click on 'Object Changeability' pushbutton-->
    And for Object types RSPC and ISIP make "changeable/Not Changable" .
    Note: This will work only if your system is lockect aganist the changes as it is normally in Production.
    Also check the below links:
    1) Authorisation for process chains
    2) Authorization Object for Process Chain
    3)http://help.sap.com/saphelp_nw2004s/helpdata/en/35/c7e442e3c15704e10000000a155106/frameset.htm
    4) http://help.sap.com/saphelp_nw04/helpdata/en/80/1a6859e07211d2acb80000e829fbfe/frameset.htm

  • Error "Object 'DM' (APCO) of type 'Application' is not available in version 'A'" while transporting process chain to production system.

    Hi Gurus,
    Whenever I try to transport a process chain ZFI_0FIGL_C10 from dev. to qua. & prod. the error “Object 'DM' (APCO) of type 'Application' is not available in version 'A'” is displayed in the end of creating transport package.
    The process chain was created to load data to 0figl_c10 and it works all right on all systems (dev. qua. prod.).
    The process chain contains processes for:
    - starting the process chain
    - executing infopackage (for loading data to 0figl_o10),
    - ACR (activate data in 0figl_o10)
    - delete index 0figl_c10
    - DTP loading data from 0figl_o14 to 0figl_c10    
    - executing infopackage 80FIGL_O10
    - creating index in 0figl_c10
    - building DB statistics
    - rolling up aggregates in 0figl_c10
    - deleting of requests from the changelog 0figl_o10
    - deleting of requests from PSA (0fi_gl_10)
    How to find what cause that error.
    Regards,
    Leszek

    Hi,
    A SAP consultant told me to ignore that error. 
    Indeed, after creating transport with some new process chains (again I was informed about that error "APCO ...") and transporting it to production everything works all right.
    The problem is described in sap note: 883745.
    Regards, Leszek  

  • Email Alert for Process Chain for ABAP Process Type

    Hi BW Experts,
                             I created a process chain based on ABAP Process Type ( for Broadcasting rsrd_broadcast_starter). I want to add alert message for each ABAP process if it is failed. But I cant see any option showing Successfull or Error or Always when I select create message option on the process type. How ever I can see for other process chain which is loading data (Process Type is Info Package ) from SAP into BW.
                             Please some one tell me why it is not showing alert message for ABAP Process Type.
    Thanks
    Ganesh Reddy.
    Edited by: Ganesh Reddy on Jul 13, 2009 10:16 PM

    I dont have the exact answer for your question, But as a work around i can suggest you that.
    If these ABAP programs are included in a chain and this local chain is a part of meta chain then you can create a message on the local chain.By right clicking on the local chain >Create Message>Success
                                                                                    --->Failure
    >Always
    Hope this resolves the problem tempervorly.I will get back to you once i have
    Or the permanent solution is
    Its big and also easy method to perform, by this you will be able to get all the options for a ABAP Program also.If you have any questions please let me know.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/a-c/creating%20an%20abap%20process%20type%20for%20process%20chains%20in%20bi.pdf

  • Process Type ABAP does not work properly via process chain

    Dear SDNers
    I am running a process chain and it contains process type ABAP program. ABAP program was running correctly till now via this process chain. ABAP program process type generally takes approximately 2 hours to run. But now, this process type for ABAP program just run for less than 1 minute and finishes successfully. The issue is that ABAP program does not run at all.
    I ran the ABAP program in background and it took approximately 2 hours to run. ABAP Program is local means in our BW system and does not involve Remote Function call. We have BI7.0 system
    Has some one came across this type of issue?
    Best Regards
    Pradip

    Has the aleremote user or which ever user you have defined for background scheduling changed permissions recently?
    What happens if you create an adhoc chain and include this ABAP variant, does it run then?
    What does the log say in SM37 when run via process chain?
    Cheers
    Craig

  • List of all the process types used in the creation of process chains

    Hi Gurus,
    I am new to process chains creation, can any one give the list of all the process types used in the creation of process chains and there uses also.
    Please search the forum before posting a thread
    Edited by: Pravender on Jan 4, 2011 4:18 PM

    Hi,
    As process chain is to automate the data load step.
    For Ex:- If you are loading data from R/3 to DSO CUBE.
    Here you require Info package to load till PSA.
                                 DTP to load till DSO
                                  Another DTP to load Cube.
    And all other process like psa deletion AND process you can find in RSPC tab.
    Thnaks,
    Saveen Kumar

  • How To use process type in Process Chain

    Hi,
    I am new in Procc. chain and now seeking documentation of The process type in Process chain that's describing how and when to use it.
    Can you please help ?
    thanks
    supriatna
    Message was edited by: BW - xltrs

    Hello Supriatna,
    Please have a look on SAP help portal to understand complete work flow of BW process chain.
    http://help.sap.com/saphelp_nw04/helpdata/en/86/6ff03b166c8d66e10000000a11402f/frameset.htm
    Regards,
    ~Ketan

  • Decision type in process chain

    Hi
    I have added decision type in process chain with below formula.
    WORKINGDAY_MONTH( SYST-DATUM, 'US', '' ) <= 7
    now, i want to run this same process for last working day of the month as well,,
    How can i add that here.
    Please guide.
    Thanks
    Anuja

    Hello Anuja,
    You can try with below formula !
    DATE_MONTH( SYST-DATUM + 1 ) <> DATE_MONTH( SYST-DATUM )
    This will check  if today is the last day of current month, means this code will check if today's month is equal to tomorrow's month . If not then this is last working day of the month.
    And on every lst working day it will be successful.
    Secondly you can try writing the ABAP Code ( Customer Exit) for this.
    Hope this helps !
    Regards
    YN

  • Process type "Delete overlapping request in cube " in process chain

    Hi
    can somebody suggest me where i need to place the process type "Delete overlapping request" for an infocube.
    Regards,

    Hi,
    When you use the corresponding process in the process
    chain maintenance screens to specify the conditions for
    automatic deletion, these conditions are applied to all
    the InfoCubes for the selected InfoPackages
    Overlapping: If you set this indicator, existing requests are also
    delete from the InfoCube if the selection criteria of the new request partially or wholly overlap the selection criteria of the request to be deleted
    Same or Comprehensive: If you set this indicator,
    requests are only deleted from the InfoCube if
    the selection conditions of the new request are
    the same as or more comprehensive than the selection
    conditions of the request to be deleted.
    Thanks
    Bhagesh

  • Process type in Process chain

    HI all;
    I want to cancel the process type if it takes let's say more than 2 hrs.; the reason is sometimes the rollup job don't finish and just hang it forever...until more than 12 hrs and we have to manually cancel the job in the morning when we come to the office. This is affecting the runstats job when we do after the process chain completes.
    so, is there any set up that I can do to cancel the process types let's say rollup for a cube if this doesn't finish by 2 hrs automatically.
    thank you.

    Bhanu;
    they are SEM cubes; and there are several situations sometimes the rollup gets stucks..; for example if some users do the planning in the same cube, or locks.,,etc..we tried to tell all the planner not to do any activities during the daily process chain time. we are doing rollup and compress every day for the sem cubes.

Maybe you are looking for