Interruption while updating from 12.1.1 to 12.1.3

Dear Legends,
As i am doing an upgrade of 12.1.3 from 12.1.1, first patch 9239089 has been applied successfully but while compiling the APPS schema it shows an error kernel : journal commit I/O error I kindly request you to help me on this by providing your valuable suggestions.
Now what should i do?
1. Either compile the APPS schema again? - which went nearly 5 - 6 hours already still 20000 invalid objects to be compiled but this error occurs in between.
2. Again start the Patch from first?
3. Give a machine restart and then do the option 1.?
SERVER Details
=========
OS : OL 5.7 64 bit
HDD : 1TB
RAM : 8GB
PROC: Core i5
but compared to other servers which i have installed some days before was good and more fast while installing, which contains the same above said configurations but this is the only thing is dead slow while installation.
Normally i captured the time with the same configuration for 3 other machines which takes 15 - 20 hours to upgrade 12.1.3. I'm really getting a big mess with this machine for the past 2 months.
Thanks & Regards,
Karthik Singh
Edited by: karthiksingh_dba on Dec 2, 2012 8:44 AM

As i am doing an upgrade of 12.1.3 from 12.1.1, first patch 9239089 has been applied successfully but while compiling the APPS schema it shows an error kernel : journal commit I/O error I kindly request you to help me on this by providing your valuable suggestions.At what stage/script you are getting this error?
Can you find any errors in the database log file?
Now what should i do?
1. Either compile the APPS schema again? - which went nearly 5 - 6 hours already still 20000 invalid objects to be compiled but this error occurs in between.Why to compile it again? Just compile the rest of invalid objects and continue with the patch (restart failed workers in case workers failed to run(.
2. Again start the Patch from first?No, you can re-run adpatch and continue with the previous failed session after you fix the issue.
3. Give a machine restart and then do the option 1.?Compile invalid objects first then continue with the patch.
Thanks,
Hussein

Similar Messages

TS3694 Hi my iphone 5 is bricked in recovery mode while updating from ios 7 to 7.0.4 and every time when i try to restore Unknoown error 12 pops up.iphone was not jailbroken. please help

Hi my iphone 5 is bricked in recovery mode while updating from ios 7 to 7.0.4 and every time when i try to restore 'Unknoown error 12' pops up each time.iphone was not jailbroken. please help

From the article that your statement was posted from:
Check for hardware issues
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.

Error while updating from 10.8.4 to 10.8.5 on MacBook Pro

Hi,
I wanted to update from 10.8.4 to 10.8.5 as offered by App Store. During installation an error message box showd up saying just "An unexspected error occured" (Translated from german). After hitting "ok", the update disappeared from the AppStore Update Tab. There was a hint before, that for that update I had to restart the computer, but after that error message, there was no notice in the message center (as it normallys shows up) to restart. I did'nt restart until now, since I'm not sure if my system will still work afterwards (at the moment it seems to be all ok). The "About this Mac" windows show already version 10.8.5.
I have an MacBookPro 15'' Retina, German version.
I looked throught the installation protocol and found the line, where it was logged: Here is an excerpt from the log file. I marked the relevant line with "-->".
I don't now what to do now. Can I /Should I restart my Macbook ? Should any action be made to correct this error or is it not important ? Can I redo the update ?
Hope that someone could help me.
Regards
Sep 28 13:57:28 localhost Software Update[16534]: SUAppStoreUpdateController: start download session with 091-9721
Sep 28 13:57:28 localhost Software Update[16537]: Acquired Lock: 501, 16534, 0
Sep 28 13:57:28 localhost Software Update[16534]: SUAppStoreUpdateController: session began for products 091-9721
Sep 28 14:04:42 localhost Software Update[16537]: Releasing Lock: 501, 16534, 0
Sep 28 14:04:42 localhost Software Update[16534]: SUAppStoreUpdateController: session ended for products 091-9721
Sep 28 14:04:42 localhost Software Update[16534]: SUAppStoreUpdateController: start install session with 091-9716
Sep 28 14:04:42 localhost Software Update[16537]: Acquired Lock: 501, 16534, 0
Sep 28 14:04:42 localhost Software Update[16534]: SUAppStoreUpdateController: session began for products 091-9716
Sep 28 14:04:53 localhost Software Update[16534]: Product 091-9716: SU choice not visible
--> Sep 28 14:04:53 localhost Software Update[16534]: SUAppStoreUpdateController: error installing product 091-9716: Ein unerwarteter Fehler ist aufgetreten.
Sep 28 14:04:53 localhost Software Update[16534]: Removing 091-9716
Sep 28 14:04:53 localhost Software Update[16537]: Releasing Lock: 501, 16534, 0
Sep 28 14:04:53 localhost Software Update[16534]: SUAppStoreUpdateController: session ended for products 091-9716
Sep 28 14:06:40 localhost Software Update[18452]: SUAppStoreUpdateController: found in cache: 091-9721, zzzz041-9488
Sep 28 14:06:40 localhost Software Update[18452]: SoftwareUpdate: Scan for client pid 18452 (/Applications/App Store.app/Contents/MacOS/App Store)
Sep 28 14:06:40 localhost Software Update[18452]: SoftwareUpdate: Using filter keys 091-9721, zzzz041-9488
Sep 28 14:06:41 localhost Software Update[18452]: SoftwareUpdate: Using catalog https://swscan.apple.com/content/catalogs/others/index-mountainlion-lion-snowleo pard-leopard.merged-1.sucatalog.gz
Sep 28 14:06:41 localhost Software Update[18452]: Added 11 PPD versions for /Library/Printers/PPDs/Contents/Resources from cache as of 2013-09-21 19:26:46 +0000

The error happened with this : Digital Camera RAW Compatibility Update 4.09
If you have 10.8.5 & things work as expected, you probably don't need to do anything - although there's always the combo update, as Barney mentioned.

Error while updating from front end

Hi,
I'am using oracle forms 6i to connect to a table and i'am trying to update from the frontend, but i get an error saying the following,
'Could not reserve record( 2 tries )...'
what is the reason, is it because the record is locked???
and if so is there any way to find out whether a record is locked without trying to update and find it out??? kindly reply as soon as possible...
Thanks And Regards,
Vairavan.S

Yes.. This message comes when the record that you are trying to update is opened for update by another application or explicitly locked by some other user. So, whenever you try to update the record, the standard practice is to lock the row.
If you are able to lock the row then you can update it.
Example :
CURSOR emp_cur(p_emp_id NUMBER)
SELECT *
FROM emp
WHERE emp_id = p_emp_id
FOR UPDATE OF emp_id NOWAIT;
l_emp_rec EMP_CUR%ROWTYPE;
When you open this cursor and fetch into a Record variable, it fetches the data if the record is not locked. Else it gives you NULL in record variable fields.
Use this if you are using a backend procedures to do operations on your record
Cheers
Kumar

I get an error "iTunes + QuickTime" has an invalid signature while updating from 10.1 to 10.2.2

I get an error "iTunes QuickTime" has an invalid signature. The download has been removed. When trying to update from version 10.1 to 10.2.2. I have a Toshiba laptop running Windows 7 OS. I have tried repairing all the Apple software on the laptop. What do I need to do to get this updated?

I have not had this problem before but the latest update to iTunes + Quicktime, offered today, puts me in the same situation.
The web is covered with reports of this issue over the years, always "iTunes + Quicktime has an invalid signature", but nothing I can see which is a good fix for the problem.
Tried chkdisk, install manually doesn't work, the installer just keeps trying.
Tried installing QT 7.6.4 independently from the Apple download page, that didn't help either.
If this is so prevalent, why isn't there more on the main Apple site about it?

Ora -20001 error coming while updating from a tabular form

Hi
I have a tabular form , which updates a table in the database.
Whenever I update the record first time I getting an error as
Error in MRU internal routine ORA-20001.Error in MRU:row=1,
ORA-1403 no_data_found, update abc.sale_forcast_temp set "PK_ID"=:b1,"W27"=:b2
Error unable to update process
But when I press Ok return to the form and then again try to update , records gets successfully updated
Regards
Shashi

Kamal,
This will be the pseudocode.
Procedure A()
select * from EMP bulk collect into records_array; --Of type RECORD_ARRAY
batch_count = (records_array.length) / batch_size;
--batch_size is say 5000 rows and batch_count is the number of batches
for i in 1..(batch_count+1)
B( records_array);
C();
commit;
Procedure B(records_array in RECORD_ARRAY )
INSERT /*+PARALLEL(EMP_DUMMY, 2) */
INTO TABLE EMP_DUMMY
SELECT * from TABLE(CAST(records_array as RECORD_ARRAY) ;
Procedure C()
Other operations which include reads on the EMP_DUMMY table;
This is the top view of how it looks like. Actually the Select statement for the insert statement is very complex and I do a join on the records that are being passed in by casting it into a table. This query is taking about 40 minutes for 10,000 rows in the records_array. I need to parellelise this query because each row of the records_array yields a different row for the EMP_DUMMY table.
I hope that I made it clear for you.
Can you also tell me if procedure C in which I shall be doing a read on the EMP_DUMMY table, has any affect of the parallel insert
Thanks for your help.

Error 1603 while updating from iOS5.0 to iOS5.1 on iPhone4

When restarted my computer and reconnects my iPhone, it now prompts saying that iPhone in recovery mode and I must restore before it can be used with iTunes. I am very sure there's 2 backup copies in my (default designated) computer folder, with one being dated 12Mar (the day of updating). I browsed the computer folder while waiting for the downloads in iTunes.
However the backup folder is now empty!! and I can't restore to any previous backup, and my phone cannot be turn on. The iTunes restore button asked if I wanted to restore to original factory settings. How could this happen?!! My Recycle bin has this item "iPhone3,1_5.0.1_9A405_Restore.ipsw".
Please advise. How can I retreive my previous phone backup, or just return to iOS5.0.1 with its data prior to the 5.1?
Please help!! your kind assistance is muchly appreciated. thanks.

I have figured out. My bad. I searched at the wrong backup folder. Anyway, I just proceed with the restore and then when it completes, it will prompt to restore to previous backup. Apology for the inconvenience. Thanks all.

Error in rules while updating from PSA to ODS

Hi Experts,
I am trying to load data from PSA to ODS using DTP. For about 101 records I get the following error:
"Runtime error while executing rule -> see long text     RSTRAN     301"
On further looking at the long text:
Diagnosis
    An error occurred while executing a transformation rule:
    The exact error message is:
    Overflow converting from ''
    The error was triggered at the following point in the program:
    GP4808B5A4QZRB6KTPVU57SZ98Z 3542
System Response
    Processing the data record has been terminated.
Procedure
      The following additional information is included in the higher-level
     node of the monitor:
     o   Transformation ID
     o   Data record number of the source record
     o   Number and name of the rule which produced the error
Procedure for System Administration
When looking at the detail:
Error Location: Object Type    TRFN
Error Location: Object Name    06BOK6W69BGQJR41BXXPE8EMPP00G6HF
Error Location: Operation Type DIRECT
Error Location: Operation Name
Error Location: Operation ID   00177 0000
Error Severity                 100
Original Record: Segment       0001
Original Record: Number        2
Pls can anyone help in deducing and pointing this error to the exact spot in the transformation rule
Thanks & Regards,
Raj

Hi Kazmi:
Runtime Errors         CONNE_IMPORT_WRONG_COMP_TYPE
Exception              CX_SY_IMPORT_MISMATCH_ERROR
Short text
    Error when attempting to IMPORT object "HIST2".
What happened?
    Error in the ABAP Application Program
    The current ABAP program "RSORAT4M" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_IMPORT_MISMATCH_ERROR', was
     not caught in
    procedure "AKT_DAY_HIST2" "(FORM)", nor was it propagated by a RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    When importing the object "HIST2", the component no. 8 in the
    dataset has a different type from the corresponding component
    of the target object in the program "RSORAT4M".
    The data type is "I" in the dataset, but "P" in the program.
How to correct the error
    Try to find out why the type of the object should be different.
    There are various possible options:
    1. The type of the imported field has changed in the Data Dictionary.
       Make sure that the type of the imported field matches the type
       of the field in the Data Dictionary.
       If the data cannot be restored from another source, the data must be
       read by the 'old' structure, converted und again eported with the new
       structure, so that future IMPORTs will always function with the new
       structure.
    2. A new program version is active, which no longer fits the dataset.
       Try to solve the error generating the program "RSORAT4M" again. This
       works as follows: Select transaction SE38 in the SAP system. Enter
       the program name "RSORAT4M". Then activate the function 'Generate'.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"CONNE_IMPORT_WRONG_COMP_TYPE" "CX_SY_IMPORT_MISMATCH_ERROR"
"RSORAT4M" or "RSORAT4M"
"AKT_DAY_HIST2"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
    To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
    Display the system log by calling transaction SM21.
    Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
    In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
The exception must either be prevented, caught wit
"AKT_DAY_HIST2" "(FORM)", or its possible occurren
RAISING clause of the procedure.
Hope this helps.
Thanks to you and all
Raj

Crashed while updating from 10.6.8 to 10.7 and didn't import anything.

Hi all, I have just updated my Mac pro from 10.6.8 to 10.7.5 and it crashed during the last minute of the install. I left it for a few hours, hoping that it would complete the install, but eventually was forced to restart it by holding down the power button. It started up fine, but instead of merging with my files and and applications, it brought up a new, clean operating system with none of my old data or applications. It prompted me to use the migration assistant, but as the data I need is already on the start up volume, it doesn't give me the option of importing it. I did a spotlight search and it seems that it is all still there in a folder called "recovered items". What should I do to get it all in place? Thanks Evan

Evan Harris wrote:
"applications" "system" "library" and "users" and all the data I need will be in them.
You can't simply replace those items, except for files in /Users/yourname/Documents
(if that's where you keep all you files) So the good news is all your own data should be intact.
Migration assistant wouldn't let me access them because they are inside a folder.
I don't understand what you mean by they are inside a folder?

Adobe Updater overloads data line while updating from Acrobat Reader 8.1.2 to 8.1.3

Hello
I'm from germany but I'm doing my best to get you understanding me.
I'm experiencing some problems updating Adobe Reader from version 8.1.2 to 8.1.3 in our company. Our users have no administrative rights on their PCs and therefore are not able to install any update manually. That's why I want to use the Adobe Updater.
We're also using a proxy which doesn't allow our users to download any *.exe files. I configured Adobe Updater to search for Adobe Reader updates once a month.
But then from time to time our data line was fully overloaded. When I checked the logfiles of our proxy I mentioned that Adobe Updater tried to reach ardownload.adobe.com for more than 1500 times in only 3 hours from only 1 PC. This means that nearly every 7 seconds ardownload.adobe.com has been contacted by one PC. When I deactivated Adobe Updater the problem was solved. So it seems to me, that Adobe Updater is the reason why our data line get's more and more loaded by this update function.
What is happing during the discovery of available updates and wherefore does Adobe Updater tries to download the same file for more than 1500 times? Does anyone have an answer to this? If you have any proposal to solve this problem I would be glad if you answer me. And let me add that I don't want to grant our users access for downloading .exe files :-)
Thanks so much
Macke

The latest release of the Adobe Updater has fixes for networking with proxy servers. If you aren't running the latest (because it can't connect), you can manually download and then install the Adobe Updater for Reader & Acrobat 8 from the URLs below.
>Windows: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4103
>Mac: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4104
There are similar fixes in the latest Adobe Updater for CS4 and Acrobat & Reader 9, downloadable from:
>Windows: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4231
>Mac: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4232
Rodney Smith
Developer
Adobe Systems

Error while updating from Ios5 to Ios5.0.1

When i try to upgrade mi original ipad from 5.0 to 5.01 it marks me an error at the end of the download
ill aprecciate any help about it

If you are getting a network timeout error then try temporarily turning off your firewall and antivirus software until the download has completed. If it's a different error then if you say what it is somebody might be able to help.

Regarding syntax error while updating from 4.6b to ECC 6.0

hello Experts,
I'm presently working in upgrade project, Here it shows an error for one of the form pasted below.
FORM MAKEPRINT USING TXT.
DATA: BEGIN OF CVT_TABLE,
        X0(1) TYPE X VALUE 0,
        C0(1) VALUE '#',
        X1(1) TYPE X VALUE '7F',
        C1(1) VALUE '#',
        END OF CVT_TABLE.
TRANSLATE TXT USING CVT_TABLE.
ENDFORM.                    "MAKEPRINT
Error - CVT_TABLE must be a character type data object ( data type C,N,D,T or STRING ).
I dont have solution for the above code, Would you please kindly provide me the solution.
<removed_by_moderator>
Thanks,
Abdur
Edited by: Julius Bussche on Sep 22, 2009 1:26 PM
Edited by: Julius Bussche on Sep 22, 2009 1:26 PM

Hi,
       This happens due to unicode conversion in ECC.You will have to change the type X to type C using the class cl_abap_char_utilities. For code help see the below link
http://help.sap.com/saphelp_nw04/helpdata/EN/79/c554d9b3dc11d5993800508b6b8b11/content.htm

3194 error while updating from 4.3.5 to 5.1.1

i have just downloaded the latest itunes and have successfully downloaded the latest 5.1.1 for ipad 2 but right after sync i get the extracting software msg and after that i get 3194 error. i have even tried reinstalling itunes and rebooting ipad 2 but i have failed to get the thing going. help me

Try and get your iPad in Recovery Mode
http://support.apple.com/kb/ht1808

HT4623 I have an apple 3GS phone .I connected to iTunes while updating from 4.1 version, after the updation has been completed it's coming unable to activate iPhone because. the activation server is temporarily unavailable.I connected to iTunes but its no

My iPhone cannot be activated can u tell me the reason.

Has the device ever been hacked or jailbroken?

Itouch froze on "connect to itunes" screen while updating

Itouch froze on "connect to itunes" screen while updating from 5 to 5.01, what to do???

It happen to me several times, I just simply wait until it is out of battery and connect it to my itunes and it will show up in my computer. if the problem cannot be solved in this way, you can connect it to computer after several days of running out of battery and it may work. I know it is a little bit stupid idea,but it did work on my itouch

Interruption while updating from 12.1.1 to 12.1.3

Similar Messages

Maybe you are looking for