INTERVALS in a Domain
Hi All,
I want to have search help for a field enhancing the standard table. The search help should give 0-99 as a range and 99-999 in a range.
Say,
It should display 0 - 99. I tried by passing lower limit and upper limit values to the domain as 0 and 99. But it didn't fetch me all the values from 0 till 99. Please guide to me achieve this. I know I'm pretty much wrong this way.
All ur quick inputs is highly appreciated!!
Thanks in Advance,
VV
Yeah, I did try friend, but it didn't work. It just gave me two values in the search help. I wanted all the values from 0 till 99 instead it gave 'Lower Limit' as '0' and 'Upper Limit' as '99'.
Can you suggest an alternative way to go?
Thx in advance.
VV
Similar Messages
-
Warning: Backing up your iWeb 'Domain' file will not save you.
Here's the transcript from my chat with a MobilMe Support Rep. after losing (they simply disappeared) all of my blog's very valuable comments (hundreds), for nearly two years of blog entries.
I have many backed up 'domain' files, and each shows the comments that have been received and saved for all the entries when iWeb first starts up. But then, for some reason iWeb scrubs them (they just disappear) and when I "Publish All" to the web, the entries are published but not the comments attached.
Read MobilMe's response and consider yourselves warned. Backups won't save you. They simply won't. And yet . . . I was actually told I should have backed up. When I told my tech rep I had, then the reality of the situation came out. This is amazing to me.
Read on . . .
You are chatting with Omran A, a MobileMe Support Representative
Hi, my name is Omran A. Welcome to Apple!
Omran A: How are you?
Omran A: I see that you have lost your comments.
Omran A: Correct?
Perry: Yes. Phone just rang, so my responses will be a bit slow for a few
Omran A: I apologize for the inconvenience.
Omran A: Have you upgraded iWeb recently?
Perry: Yes, Omran, is there any way to retrieve them?
Omran A: I am sorry this has happened to you. Losing comments tend to happen when upgrading iweb:
Perry: I'm running the latest version, and have been since it came out. Had problems with people even leaving comments for a while, as did everyone who was using iWeb, but that had become an issue of the past for a few months as memory serves.
Omran A: http://support.apple.com/kb/HT2094
Omran A: Please let me know if you can view the link
Perry: We are well past the info in this upgrade doc. Upgraded long ago
Perry: Yes, I've got it up
Omran A: I just wanted to show you that upgrading iWeb tends to delete comments
Perry: I am at step 6, contact MobilMe support.
Omran A: Can you please give me a link to your site?
Perry: http://web.me.com/davidperryphoto1/GardenBlog/APhotographers_Garden_Blog/A_Photographers_GardenBlog.html
Omran A: Can you please give me a link to your site?
Omran A: Thank you
Omran A: Please hold while I do some investigation
Omran A: Did your comments get deleted after updating to iWeb 2.0 or did happen month after that?
Perry: More than a month afterward. Just a week or so ago
Omran A: OK
Omran A: Thank you
Omran A: Please hold while I do some further investigation
Perry: Still there?
Omran A: Yes
Omran A: I am still performing a investigation.
Omran A: Please give me a few more minutes.
Perry: Thanks. I'll just keep on working here...
Omran A: Thank you for your patience
Omran A: I am terribly sorry. I search all over the servers and I am not able to recover your comments.
Omran A: I suggest backing up comments regularly.
Omran A: I suggest backing up comments regularly.
Perry: When I start up iWeb with my saved "domain" file, I see the comments, but then, within moments, the program scrubs them, because, apparently they are no longer out there on the web. Is there anyway to recapture them from the saved domain file?
Perry: How the heck do I back up my comments if they are stored in some obscure place on one of your servers and seperate from my website?
Omran A: So you see them and then they disappear
Perry: yes
Omran A: OK
Omran A: I believe the following link shows you how to backup to save comments
Omran A: http://support.apple.com/kb/HT2094
Perry: Omran, look. I have a backed up copy of my domain, just as they direct. When I start up iWeb with this file, I see the saved comments. But when I publish all, as directed, I get the blog but I get no comments published. That's why you and I are talking. I've apparently got the comments still in some form in my saved domain, but the program, or .ME scrubs them. What the **** good does the backed up file do me if I can't get Mobil Me to recognize the comments and re-post them? This is my issue.
Omran A: OK
Omran A: I am sorry I did not fully understand you
Omran A: One moment please.
Omran A: I am sorry even though you are able to see the comments for a split second. You can not recover them from the domain file.
Omran A: Just for clarification
Perry: Can we agree that this is a gigantic "cluster #@$*" and that this wonderful new opportunity presented us in the form of MobilMe has been very painful and expensive for many of your loyal customers?
Omran A: You see the comments with the domain file you backed up in iweb but can not see them once you published them to the internet, correct?
Perry: correct.
Omran A: Do they disappear in iWeb ?
Perry: But the program or something tends to scrub them within a minute or so of the program starting up. They are there, in all the entries dating all the way back, and then they are not. They just disappear.
Omran A: I am sorry the domain is there but We can not recover the comments. I am sorry that you have had a bad experience with MobileMe. We have given our loyal customers a 90 day extension for your patience with us.
Perry: Do you or anyone there know of a resource that I can send the domain file to take it apart and retrieve the comments. Someone has to know how to burrow into the file and pull that stuff. Anybody there know of a resource?
Omran A: Let me check
Omran A: I just checked with my supervisor and he checked the servers and said there is no way to recover your comments.
Omran A: My sincere apologies. I understand loosing comments that span for two years is very sad.
Omran A: If there was a way I would let you know.
Omran A: I am sorry that you experience with MobileMe has not been that great, you may leave a feedback and let us know what issues has frustrated you
Omran A: MobileMe feedback
Omran A: Upper manager reads the feeback
Omran A: Feedback
Perry: Thanks to you personally Omran for your efforts. I'll be saving and perhaps publishing this dialogue between us on the blog as a warning to others, along with a few choice words and pictures illustrating my newly formed opinion of MobilMe. Watch for it.
Omran A: If you select the blue close button and you will receive a survey.
Omran A: Please note that the survey reflects only me.
Omran A: I am sorry that I was not able to help you.
Perry: NO worries. Thanks!
Omran A: If you create the blog can you change my name to something else
Omran A: It would be horrible to have people coming in and saying oh no it is you!
Perry: Why, you were awesome. It is iWeb and this new, rammed down our throats long before it should have been, MobilMe that is the problem, not you. You were a real peach.
Omran A: Thank you Perry
Omran A: Thank you for chatting and I hope MobileMe services improve to meet your needs
Omran A: And have a great day
Perry: You can be certain that I do too! Thanks again!Yeah, if your Domain won't fit on a CD or you don't have space to save it, at LEAST set up Backup to annoy you at regular intervals. Once you've clicked cancel a few times due to wanting to get something else done, perhaps it will begin to wear on your psyche and guilt you into going ahead and doing it!
-
Active Directory domain controller could not be contacted
Hello
Help please.
I am trying to add a new server (2008) to domain 'bridgelimited.local' - only one DC (2003) doing everything at the moment. The plan is to add the new server, then move everything over from the old machine, then retire/upgrade the old machine and use as a backup.
I am currently trying to dcpromo on the new machine but I get the following error:
The following error occurred when DNS was queried for the service location (SRV) resource record used to locate an Active Directory Domain Controller for domain bridgelimited.local:
The error was: "DNS name does not exist."
(error code 0x0000232B RCODE_NAME_ERROR)
The query was for the SRV record for _ldap._tcp.dc._msdcs.bridgelimited.local
Common causes of this error include the following:
- The DNS SRV records required to locate a AD DC for the domain are not registered in DNS. These records are registered with a DNS server automatically when a AD DC is added to a domain. They are updated by the AD DC at set intervals. This computer is configured to use DNS servers with the following IP addresses:
212.50.160.100
196.168.16.2
- One or more of the following zones do not include delegation to its child zone:
bridgelimited.local
local
. (the root zone)
For information about correcting this problem, click Help.
192.168.16.2 is IP address for the DC.
Any help would be grately appreciated.
Kind Regards
RichardManaged to get the DCDIAG
Here goes (I know my harddisk is failing - that's why I am desperate to get everything shifted to the new server).
Domain Controller Diagnosis
Performing initial setup:
* Verifying that the local machine bridgeserver, is a DC.
* Connecting to directory service on server bridgeserver.
* Collecting site info.
* Identifying all servers.
* Identifying all NC cross-refs.
* Found 1 DC(s). Testing 1 of them.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\BRIDGESERVER
Starting test: Connectivity
* Active Directory LDAP Services Check
* Active Directory RPC Services Check
......................... BRIDGESERVER passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\BRIDGESERVER
Starting test: Replications
* Replications Check
* Replication Latency Check
DC=ForestDnsZones,DC=BridgeLimited,DC=local
Latency information for 2 entries in the vector were ignored.
2 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
DC=DomainDnsZones,DC=BridgeLimited,DC=local
Latency information for 2 entries in the vector were ignored.
2 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
CN=Schema,CN=Configuration,DC=BridgeLimited,DC=local
Latency information for 2 entries in the vector were ignored.
2 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
CN=Configuration,DC=BridgeLimited,DC=local
Latency information for 2 entries in the vector were ignored.
2 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
DC=BridgeLimited,DC=local
Latency information for 2 entries in the vector were ignored.
2 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
* Replication Site Latency Check
......................... BRIDGESERVER passed test Replications
Starting test: Topology
* Configuration Topology Integrity Check
* Analyzing the connection topology for DC=ForestDnsZones,DC=BridgeLimited,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for DC=DomainDnsZones,DC=BridgeLimited,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for CN=Schema,CN=Configuration,DC=BridgeLimited,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for CN=Configuration,DC=BridgeLimited,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for DC=BridgeLimited,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
......................... BRIDGESERVER passed test Topology
Starting test: CutoffServers
* Configuration Topology Aliveness Check
* Analyzing the alive system replication topology for DC=ForestDnsZones,DC=BridgeLimited,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for DC=DomainDnsZones,DC=BridgeLimited,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for CN=Schema,CN=Configuration,DC=BridgeLimited,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for CN=Configuration,DC=BridgeLimited,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for DC=BridgeLimited,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
......................... BRIDGESERVER passed test CutoffServers
Starting test: NCSecDesc
* Security Permissions Check for
DC=ForestDnsZones,DC=BridgeLimited,DC=local
(NDNC,Version 2)
* Security Permissions Check for
DC=DomainDnsZones,DC=BridgeLimited,DC=local
(NDNC,Version 2)
* Security Permissions Check for
CN=Schema,CN=Configuration,DC=BridgeLimited,DC=local
(Schema,Version 2)
* Security Permissions Check for
CN=Configuration,DC=BridgeLimited,DC=local
(Configuration,Version 2)
* Security Permissions Check for
DC=BridgeLimited,DC=local
(Domain,Version 2)
......................... BRIDGESERVER passed test NCSecDesc
Starting test: NetLogons
* Network Logons Privileges Check
......................... BRIDGESERVER passed test NetLogons
Starting test: Advertising
The DC BRIDGESERVER is advertising itself as a DC and having a DS.
The DC BRIDGESERVER is advertising as an LDAP server
The DC BRIDGESERVER is advertising as having a writeable directory
The DC BRIDGESERVER is advertising as a Key Distribution Center
The DC BRIDGESERVER is advertising as a time server
The DS BRIDGESERVER is advertising as a GC.
......................... BRIDGESERVER passed test Advertising
Starting test: KnowsOfRoleHolders
Role Schema Owner = CN=NTDS Settings,CN=BRIDGESERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=BridgeLimited,DC=local
Role Domain Owner = CN=NTDS Settings,CN=BRIDGESERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=BridgeLimited,DC=local
Role PDC Owner = CN=NTDS Settings,CN=BRIDGESERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=BridgeLimited,DC=local
Role Rid Owner = CN=NTDS Settings,CN=BRIDGESERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=BridgeLimited,DC=local
Role Infrastructure Update Owner = CN=NTDS Settings,CN=BRIDGESERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=BridgeLimited,DC=local
......................... BRIDGESERVER passed test KnowsOfRoleHolders
Starting test: RidManager
* Available RID Pool for the Domain is 2609 to 1073741823
* bridgeserver.BridgeLimited.local is the RID Master
* DsBind with RID Master was successful
* rIDAllocationPool is 2109 to 2608
* rIDPreviousAllocationPool is 2109 to 2608
* rIDNextRID: 2121
......................... BRIDGESERVER passed test RidManager
Starting test: MachineAccount
* SPN found :LDAP/bridgeserver.BridgeLimited.local/BridgeLimited.local
* SPN found :LDAP/bridgeserver.BridgeLimited.local
* SPN found :LDAP/BRIDGESERVER
* SPN found :LDAP/bridgeserver.BridgeLimited.local/BRIDGELIMITED
* SPN found :LDAP/96d36b0b-a148-4c2f-b3d3-8c2ac83fcaf9._msdcs.BridgeLimited.local
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/96d36b0b-a148-4c2f-b3d3-8c2ac83fcaf9/BridgeLimited.local
* SPN found :HOST/bridgeserver.BridgeLimited.local/BridgeLimited.local
* SPN found :HOST/bridgeserver.BridgeLimited.local
* SPN found :HOST/BRIDGESERVER
* SPN found :HOST/bridgeserver.BridgeLimited.local/BRIDGELIMITED
* SPN found :GC/bridgeserver.BridgeLimited.local/BridgeLimited.local
......................... BRIDGESERVER passed test MachineAccount
Starting test: Services
* Checking Service: Dnscache
* Checking Service: NtFrs
* Checking Service: IsmServ
IsmServ Service is stopped on [BRIDGESERVER]
* Checking Service: kdc
* Checking Service: SamSs
* Checking Service: LanmanServer
* Checking Service: LanmanWorkstation
* Checking Service: RpcSs
* Checking Service: w32time
* Checking Service: NETLOGON
......................... BRIDGESERVER failed test Services
Starting test: OutboundSecureChannels
* The Outbound Secure Channels test
** Did not run Outbound Secure Channels test
because /testdomain: was not entered
......................... BRIDGESERVER passed test OutboundSecureChannels
Starting test: ObjectsReplicated
BRIDGESERVER is in domain DC=BridgeLimited,DC=local
Checking for CN=BRIDGESERVER,OU=Domain Controllers,DC=BridgeLimited,DC=local in domain DC=BridgeLimited,DC=local on 1 servers
Object is up-to-date on all servers.
Checking for CN=NTDS Settings,CN=BRIDGESERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=BridgeLimited,DC=local in domain CN=Configuration,DC=BridgeLimited,DC=local on 1 servers
Object is up-to-date on all servers.
......................... BRIDGESERVER passed test ObjectsReplicated
Starting test: frssysvol
* The File Replication Service SYSVOL ready test
File Replication Service's SYSVOL is ready
......................... BRIDGESERVER passed test frssysvol
Starting test: frsevent
* The File Replication Service Event log test
......................... BRIDGESERVER passed test frsevent
Starting test: kccevent
* The KCC Event log test
Found no KCC errors in Directory Service Event log in the last 15 minutes.
......................... BRIDGESERVER passed test kccevent
Starting test: systemlog
* The System Event log test
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:47:27
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:47:41
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:47:55
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:48:09
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:48:23
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:48:38
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:48:52
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:49:06
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:49:20
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:49:54
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:50:08
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:50:22
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:51:33
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:51:53
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:52:07
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:52:21
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:52:35
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:52:49
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:53:03
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:53:17
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:53:31
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:53:45
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 17:12:23
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 17:12:37
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 17:12:51
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 17:13:05
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 17:13:19
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 17:13:33
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 17:13:47
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 17:14:01
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 17:14:15
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 17:15:24
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 17:15:38
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 17:15:53
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 17:16:07
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 17:16:21
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 17:16:35
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 17:16:49
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 17:17:03
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 17:17:17
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
......................... BRIDGESERVER failed test systemlog
Starting test: VerifyReplicas
......................... BRIDGESERVER passed test VerifyReplicas
Starting test: VerifyReferences
The system object reference (serverReference)
CN=BRIDGESERVER,OU=Domain Controllers,DC=BridgeLimited,DC=local and
backlink on
CN=BRIDGESERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=BridgeLimited,DC=local
are correct.
The system object reference (frsComputerReferenceBL)
CN=BRIDGESERVER,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=BridgeLimited,DC=local
and backlink on
CN=BRIDGESERVER,OU=Domain Controllers,DC=BridgeLimited,DC=local are
correct.
The system object reference (serverReferenceBL)
CN=BRIDGESERVER,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=BridgeLimited,DC=local
and backlink on
CN=NTDS Settings,CN=BRIDGESERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=BridgeLimited,DC=local
are correct.
......................... BRIDGESERVER passed test VerifyReferences
Starting test: VerifyEnterpriseReferences
......................... BRIDGESERVER passed test VerifyEnterpriseReferences
Running partition tests on : ForestDnsZones
Starting test: CrossRefValidation
......................... ForestDnsZones passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Running partition tests on : DomainDnsZones
Starting test: CrossRefValidation
......................... DomainDnsZones passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Running partition tests on : Schema
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Running partition tests on : Configuration
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Running partition tests on : BridgeLimited
Starting test: CrossRefValidation
......................... BridgeLimited passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... BridgeLimited passed test CheckSDRefDom
Running enterprise tests on : BridgeLimited.local
Starting test: Intersite
Skipping site Default-First-Site-Name, this site is outside the scope
provided by the command line arguments provided.
......................... BridgeLimited.local passed test Intersite
Starting test: FsmoCheck
GC Name: \\bridgeserver.BridgeLimited.local
Locator Flags: 0xe00003fd
PDC Name: \\bridgeserver.BridgeLimited.local
Locator Flags: 0xe00003fd
Time Server Name: \\bridgeserver.BridgeLimited.local
Locator Flags: 0xe00003fd
Preferred Time Server Name: \\bridgeserver.BridgeLimited.local
Locator Flags: 0xe00003fd
KDC Name: \\bridgeserver.BridgeLimited.local
Locator Flags: 0xe00003fd
......................... BridgeLimited.local passed test FsmoCheck
The only thing I can see (other then the HDD) is the
IsmServ Service is stopped on [BRIDGESERVER]
Hope you can help. Pretty please.
Kind Regards
Richard -
Problems Creating a Domain in VirtualBox
To Create a test environment to try out things like Group Policy and Windows MDOP in our work environment, I was charged with creating a set of VM's using virtualbox that would consist of 2 Clients and a Server. The server would fill the role of Domain Controller,
Group Policy Server Side (MDOP) and to test things like the new roaming profile replacement.
I am a desktop tech, having just begun self-educating on Group Policy Management and all these attempts at server management are self-taught. So, if there are any clear and foolish mistakes, please point them out as I will not be offended.
Since I am creating a separate Domain, I setup these VMs on the internal network that VBox offers, they can only communicate with each other (Internal Network: Default name: "intnet"). This worked just fine, all three could ping each other etc.
I installed a trial version of Server 2008 R2 to use as my DC and went about configuring it, I set a static IP and DNS settings. Disabled IPv6 and setup IPv4 as follows
Static IP:
IP address: 169.254.254.3
Subnet Mask: 255.255.0.0
Default Gateway: 169.254.254.0
Preferred DNS Server: 127.0.0.1 (I put in 169.254.254.3) but it auto-fills 127.0.0.1
I've been told by multiple people I either need, or need to not, have a default gateway sent. I've tried it both ways with the same result.
After that, I used DC Promo to create a forest and domain called testlab.local
This installed DNS and created a forward lookup zone of the same name. (Sorry can't post screencaps yet)
DNS
>DC01
>>Global Logs
>>Forward Lookup Zones
>>>Msdcs.testlab.local
>>>testlab.local - 2 Records show
>>>>>>>>>>>>> (same as parent folder) Start of Authority(SOA) [3], dc01.testlab.local., hostmaster.testlab.local static
>>>>>>>>>>>>> (same as parent folder) Name Server(NS dc01.testlab.local.
Now I noticed that there is no "A" Host file. But I tried to join my first client to the domain with the following IP config
Static IP:
IP address: 169.254.254.8
subnet mask: 255.255.0.0
Default Gateway: Blank
Preferred DNS: 169.254.254.3
And then tried to join the domain.
Computer Name: image1
Member of:
Domain: testlab.local
However I received:
An Active Directory Domain Controller (AD DC) for the domain. "testlab.local" could not be contacted
Ensure that the domain name is typed correctly
Details:
The following error occurred when DNS was queried for the service location (SRV)
resource record used to locate an Acitve Directory Domain Controller (AD DC) for domain "testlab.local".
The error was "DNS name does not exist."
(error code 0x0000232B RCODE_NAME_ERROR)
The query was for the SERV record for _ldap_tcp.dc._msdcs.testlab.local
common causes of this error include the following:
-The DNS SRV records required to locate a AD DC for the domain are not registered in DNS. These records are registered with a DNS server automatically when a AD DC is added to a domain. They are updated by the AD DC at set intervals. This computer is configured
to use DNS servers with the following IP addresses:
169.254.254.3
One or more of hte following zones do not include delegation to its child zone:
testlab.local
local
(the root zone)
I tried adding a "A" host record with DC01 (the name of the DC) to the DNS records but it disappears after a few minutes. Can anyone tell me what I'm doing wrong?
I would greatly appreciate any help. I can provide more data if needed.I have another developer with the same issues.
After another CLEAN install, with admin rights to the system he get's exactly the same issue!
Is there someone who can assist please.
Stuart -
SMS SRS Reporting Point - 7403 at regular time intervals
Hi,
At regular time intervals I see a 7403 error message in the "SMS_SRS_REPORTING_POINT" component appearing in my ConfigMgr 2012 SP1 environment. SQL Server 2012 is used.
My reports are working fine and accessable via the Console and URL. This error 7403 appears twice a day. The srsrp.log states the following at the moment of the issue:
STATMSG: ID=7403 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_SRS_REPORTING_POINT" SYS=servername SITE=XXX PID=8180 TID=6516 GMTDATE=Tue Aug 27 04:58:18.849 2013 ISTR0="servername" ISTR1="" ISTR2="" ISTR3=""
ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_SRS_REPORTING_POINT 8/27/2013 6:58:18 AM 6516 (0x1974)
Failures reported during periodic health check by the SRS Server servername. SMS_SRS_REPORTING_POINT 8/27/2013 6:58:18 AM 6516 (0x1974)
A few minutes before and after the health check is successful.
I found out that at the moment of my 7403 error, the SQL RS recycle process is started. The log file reportserverservice.log looks like:
06:55:58:: i INFO: Recycling the service from the default domain
The recycle time of SQL Reporting services is configured at 720 minutes, so each 12 hours.
Can someone tell me if this is normal and how I can avoid the 7403 error?
Thanks.
Greets!Yes I know this is an old post, but I'm trying to clean them up.
Have you see this blog / KB before?
http://myitforum.com/myitforumwp/2011/11/14/fix-configmgr-error-7403-srs-web-service-is-not-running-on-srs-reporting-point-server/
http://www.enhansoft.com/ -
Server 2012 Password issue on new domain
We recently setup a new domain controller running Server 2012 R2 standard 64 bit. All user profiles were setup in Active Directory. The default password we set users was Welcome1 and we chose all the defaults for the password policy. We set each account
to force the user to change their password when they first login.
The issue we see is that when a user logs in and tries to change their password, it will not let them change their password the way it should be. For example, the account "testuser" was set to Welcome1. When I tried to change it to
Atlanta@2 or Georgia8 or Nexeo+=7 or Kentucky9 it said "Unable to update the password. The value provided for the new password does not meet the length, complexity, or history requirements
of the domain"
I then tried to change it to Welcome2 and it accepted it.
I then went on the server and reset it logged in as administrator and see no issues (I can change it to whatever I want). So the issue is on the user end. I also turned OFF complexity requirements.
I logged back into the account and tried to change the password to Kentucky7 and it worked. I then did a CTRL ALT DEL and tried to change it to Kentuky9 and it gave the same error.
I'm not sure what is going on. Maybe there are time intervals on how often a user is allowed to change their password in Server 2012? Any ideas as to what is going on?I logged back into the account and tried to change the password to Kentucky7 and it worked. I then did a CTRL ALT DEL and tried to change it to Kentuky9 and it gave the same error.
I'm not sure what is going on. Maybe there are time intervals on how often a user is allowed to change their password in Server 2012? Any ideas as to what is going on?
You must set minimum password age.
What is this:
Minimum password age -
Call a function at specific intervals
Hi,
I need to call a function or page at specific intervals. Or I need a ping a page at specific intervals, to keep the session alive.
I found window.setInterval() works fine. Is there any such function in coldfusion?put your function in a cfc and use cfschedule to call to that method. Example :
remoteCalls.cfc
<cfcomponent> <cffunction name="callMe" access="remote"> .. do stuff here .. </cffunction></cfcomponent>
Setup a scheduled task in coldfusion to call your url every X minutes :
http://www.domain.com/remoteCalls.cfc?method=callMe
If you have arguments, pass them in as url variables. -
SLD Data Supplier User is locked at regular intervals
Dear Sirs,
I have a Webdynpro application using two JCO connections to the backend to fetch data. One day it just stopped working. After some searching I found out that my SLD Data Supplier user was locked in the UME, due to too many failed logins.
When I unlocked this user everything worked again. Next morning when trying the application, the SLD Data supplier user was once more locked. If I lock it up it works, but it stops working again at fairly regular intervall (due to too many failed logins).
The time it stops seems to be 15 minutes over each hour; however sometimes it seems to work for more than an hour some times less. This makes me belive that there is some kind of regular job which mess it up.
Below is an extraction on what is going on in the logs around the time it stops working.
I know others have had these kinds of error messages in conjunction with XI, but did not find a solution of the forum with fits me.
Any hint on how I can solve the problem, or find out why the user gets locked is appriciated :=)
java.lang.reflect.InvocationTargetException
com.sap.engine.services.rfcengine.DefaultRequestHandler.handleRequest(JCO.Function function) anonimus J2EE_GUEST host.domain.com Server 0 XX_XXXXX
Error 13:15:02:775 /System/Server 08/01/2006 java.lang.reflect.InvocationTargetException
com.sap.engine.services.rfcengine anonimus J2EE_GUEST host.domain.com Server 0 XX_XXXXX
Error 13:15:02:775 /System/Server 08/01/2006 java.lang.reflect.InvocationTargetException
com.sap.engine.services.rfcengine anonimus J2EE_GUEST host.domain.com Server 0 XX_XXXXX
Error 13:15:02:774 n/a 08/01/2006 Thrown: om.sap.mw.jco.JCO$J2EEAbapException: (126) SLD_CLIENT_EXCEPTION: AbapSLDRequestHandler.ping(): server connection *** failed *** on Tue Aug 01 13:15:02 CEST 2006 at com.sap.lcrabapapi.util.AbapSLDRequestHandler.raiseAbapException(AbapSLDRequestHandler.java:4184)... [see details]
com.sap.lcrabapapi.ejb.AbapSLDRequestBean sap.com/com.sap.lcrabapapi J2EE_GUEST host.domain.com Server 0 XX_XXXXX
Error 13:15:02:771 /Applications/SLD 08/01/2006 Caught a JCO.J2EEAbapException while processing a JCO request. Check the RFC engine for sanity and check your server logs and traces for more information.
com.sap.lcrabapapi.ejb.AbapSLDRequestBean sap.com/com.sap.lcrabapapi J2EE_GUEST host.domain.com Server 0 XX_XXXXX
Error 13:15:02:771 /Applications/SLD 08/01/2006 Caught a JCO.J2EEAbapException while processing a JCO request. Check the RFC engine for sanity and check your server logs and traces for more information.
com.sap.lcrabapapi.ejb.AbapSLDRequestBean sap.com/com.sap.lcrabapapi J2EE_GUEST host.domain.com Server 0 XX_XXXXX
Error 13:15:02:767 /System/Server 08/01/2006 User J2EE_GUEST, IP address
Error processing an HTTP request. Http error [401] will be returned. The error is [Access Denied.No details available].
com.sap.engine.services.httpserver n/a J2EE_GUEST host.domain.cp, Server 0 XX_XXXXX
Error 13:15:02:742 /System/Server 08/01/2006 User J2EE_GUEST, IP addressHi Jørgen,
This problem must be due to the user being entered with an incorrect password in one of your systems which accesses XI. I'm afraid the only way to find it is to go through all your systems' RFC destinations, transaction SLDAPICUST, and anywhere else the user info might be entered.
I would normally recommend creating a separate user for each system accessing XI, so that in cases like this it is far easier to narrow down the search.
Regards,
Thorsten -
Hi, Do you know how to change the "number length domain" of a "number range object"?
We have a number range object using the domain "char7", it means 7 digits width, and we
need to extend to 9 digits. The field "number length domain" is now disabled in SNRO transaction.
Thank you and best regards,
JoséHi Brad Bohn, thanks for your response.
We need to keep intervals for "historical information" purpose.
The field "Subobject data element" has the name of the data
element "ZEACSCTRLSEQ" that we use to store an ID that
groups intervals, for example:
- ID: 000001
Intervals:
01 0000001 0999999
02 1000000 1999999
03 2000000 2999999
- ID: 000002
Intervals:
01 0000001 0000200
02 0000201 0000500
03 0000501 0001000
- ...and so on...
So we are looking for a process to change the width of
the "Number Range Object" and its "Intervals" without
deleting the intervals.
¿How could you do that?
Best regards,
José -
I recently set up a Mac mini Server, and successfully bound it to our Active Directory Windows 2003 Server, and have been using it without issue for a week or so. Then yesterday afternoon it refused to allow clients to log in. I ended up unbinding it from the AD server then rebinding it, and everything looked ok, but then this morning it won't allow SMB clients to connect. Looking through the samba log, there were no entries from the time the server went live until yesterday. Then it shows the following:
2011/03/07 15:36:49, 0, pid=59 /SourceCache/samba/samba-235.5/samba/source/nmbd/nmbdworkgroupdb.c:dumpworkgroups(282)
dump_workgroups()
dump workgroup on subnet 10.2.41.22: netmask= 255.255.255.0:
CIMARRONLABEL(1) current master browser = MAIN-SERVER
MACSERVER 40819b03 (Mac OS X Server)
MAIN-SERVER 4084126b ()
2011/03/07 15:36:51, 0, pid=59 /SourceCache/samba/samba-235.5/samba/source/nmbd/nmbdworkgroupdb.c:dumpworkgroups(282)
dump_workgroups()
dump workgroup on subnet 10.2.41.22: netmask= 255.255.255.0:
CIMARRONLABEL(1) current master browser = MAIN-SERVER
MACSERVER 40819b03 (Mac OS X Server)
MAIN-SERVER 4084126b ()
2011/03/07 15:36:51, 0, pid=59 /SourceCache/samba/samba-235.5/samba/source/nmbd/nmbdworkgroupdb.c:dumpworkgroups(282)
dump_workgroups()
dump workgroup on subnet 10.2.41.22: netmask= 255.255.255.0:
CIMARRONLABEL(1) current master browser = MAIN-SERVER
MACSERVER 40819b03 (Mac OS X Server)
MAIN-SERVER 4084126b ()
2011/03/07 16:24:25, 0, pid=59 /SourceCache/samba/samba-235.5/samba/source/nmbd/nmbd.c:terminate(52)
Got SIGTERM: going down...
2011/03/07 16:25:43, 0 /SourceCache/samba/samba-235.5/samba/source/nmbd/nmbd.c:main(709)
Netbios nameserver version 3.0.28a-apple started.
Copyright Andrew Tridgell and the Samba Team 1992-2008
2011/03/07 16:25:43, 0, pid=59 /SourceCache/samba/samba-235.5/samba/source/nmbd/nmbdworkgroupdb.c:dumpworkgroups(282)
dump_workgroups()
dump workgroup on subnet 10.2.41.22: netmask= 255.255.255.0:
CIMARRONLABEL(1) current master browser = UNKNOWN
MACSERVER 40819b03 (Mac OS X Server)
2011/03/07 16:25:59, 0, pid=59 /SourceCache/samba/samba-235.5/samba/source/nmbd/nmbdworkgroupdb.c:dumpworkgroups(282)
dump_workgroups()
dump workgroup on subnet 10.2.41.22: netmask= 255.255.255.0:
CIMARRONLABEL(1) current master browser = UNKNOWN
MACSERVER 40819b03 (Mac OS X Server)
2011/03/07 16:31:09, 0, pid=59 /SourceCache/samba/samba-235.5/samba/source/nmbd/nmbdworkgroupdb.c:dumpworkgroups(282)
dump_workgroups()
dump workgroup on subnet 10.2.41.22: netmask= 255.255.255.0:
CIMARRONLABEL(1) current master browser = UNKNOWN
MACSERVER 40819b03 (Mac OS X Server)
2011/03/07 16:36:37, 0, pid=59 /SourceCache/samba/samba-235.5/samba/source/nmbd/nmbdworkgroupdb.c:dumpworkgroups(282)
dump_workgroups()
dump workgroup on subnet 10.2.41.22: netmask= 255.255.255.0:
CIMARRONLABEL(1) current master browser = MAIN-SERVER
MACSERVER 40819b03 (Mac OS X Server)
MAIN-SERVER 4084126b ()
2011/03/07 16:37:00, 0, pid=59 /SourceCache/samba/samba-235.5/samba/source/nmbd/nmbdworkgroupdb.c:dumpworkgroups(282)
dump_workgroups()
dump workgroup on subnet 10.2.41.22: netmask= 255.255.255.0:
CIMARRONLABEL(1) current master browser = MAIN-SERVER
MACSERVER 40819b03 (Mac OS X Server)
MAIN-SERVER 4084126b ()
2011/03/07 16:37:00, 0, pid=59 /SourceCache/samba/samba-235.5/samba/source/nmbd/nmbdserverlistdb.c:write_browselist(350)
writebrowselist: Fatal error - cannot find my workgroup WORKGROUP
2011/03/07 16:37:00, 0, pid=59 /SourceCache/samba/samba-235.5/samba/source/nmbd/nmbdworkgroupdb.c:dumpworkgroups(282)
dump_workgroups()
dump workgroup on subnet 10.2.41.22: netmask= 255.255.255.0:
CIMARRONLABEL(1) current master browser = MAIN-SERVER
MACSERVER 40819b03 (Mac OS X Server)
MAIN-SERVER 4084126b ()
2011/03/07 16:37:00, 0, pid=59 /SourceCache/samba/samba-235.5/samba/source/nmbd/nmbdserverlistdb.c:write_browselist(350)
writebrowselist: Fatal error - cannot find my workgroup WORKGROUP
2011/03/07 16:37:01, 0, pid=59 /SourceCache/samba/samba-235.5/samba/source/nmbd/nmbdworkgroupdb.c:dumpworkgroups(282)
dump_workgroups()
dump workgroup on subnet 10.2.41.22: netmask= 255.255.255.0:
CIMARRONLABEL(1) current master browser = MAIN-SERVER
MACSERVER 40819b03 (Mac OS X Server)
MAIN-SERVER 4084126b ()
2011/03/07 16:37:01, 0, pid=59 /SourceCache/samba/samba-235.5/samba/source/nmbd/nmbdserverlistdb.c:write_browselist(350)
writebrowselist: Fatal error - cannot find my workgroup WORKGROUP
2011/03/07 16:37:27, 0, pid=59 /SourceCache/samba/samba-235.5/samba/source/nmbd/nmbdworkgroupdb.c:dumpworkgroups(282)
dump_workgroups()
dump workgroup on subnet 10.2.41.22: netmask= 255.255.255.0:
CIMARRONLABEL(1) current master browser = MAIN-SERVER
MACSERVER 40819b03 (Mac OS X Server)
MAIN-SERVER 4084126b ()
2011/03/07 16:37:27, 0, pid=59 /SourceCache/samba/samba-235.5/samba/source/nmbd/nmbdserverlistdb.c:write_browselist(350)
writebrowselist: Fatal error - cannot find my workgroup WORKGROUP
2011/03/07 16:37:29, 0, pid=59 /SourceCache/samba/samba-235.5/samba/source/nmbd/nmbdworkgroupdb.c:dumpworkgroups(282)
dump_workgroups()
dump workgroup on subnet 10.2.41.22: netmask= 255.255.255.0:
CIMARRONLABEL(1) current master browser = MAIN-SERVER
MACSERVER 40819b03 (Mac OS X Server)
MAIN-SERVER 4084126b ()
2011/03/07 16:37:29, 0, pid=59 /SourceCache/samba/samba-235.5/samba/source/nmbd/nmbdserverlistdb.c:write_browselist(350)
writebrowselist: Fatal error - cannot find my workgroup WORKGROUP
2011/03/07 16:37:32, 0, pid=59 /SourceCache/samba/samba-235.5/samba/source/nmbd/nmbdworkgroupdb.c:dumpworkgroups(282)
dump_workgroups()
dump workgroup on subnet 10.2.41.22: netmask= 255.255.255.0:
CIMARRONLABEL(1) current master browser = MAIN-SERVER
MACSERVER 40819b03 (Mac OS X Server)
MAIN-SERVER 4084126b ()
2011/03/07 16:37:32, 0, pid=59 /SourceCache/samba/samba-235.5/samba/source/nmbd/nmbdserverlistdb.c:write_browselist(350)
writebrowselist: Fatal error - cannot find my workgroup WORKGROUP
Prior to the "Got SIGTERM: going down..." line, it showed the current master browser as MAIN-SERVER as it should, but after that it became "UNKNOWN" until I unbound it from the domain then re-bound it. But then at 16:37:32 we got the "Fatal error - cannot find my workgroup WORKGROUP", which repeats over and over in the log since that time. And since that time, Mac users have been able to log in with no issues, but Windows users are not. The Mac server isn't even visible to any Windows machines when browsing through the network.
Has anybody dealt with this before and/or know how I can resolve the problem?
Thanks!
Subject was edited by: David ThorntonJust an update on this issue: After posting yesterday I un-bound (un-binded?) the OS X server from the AD server, then reestablished the binding, and it has been working ok since then. When that happened, I got the following entry in the Samba log on the server:
(2011/03/08 12:15:25, 0, pid=59) /SourceCache/samba/samba-235.5/samba/source/nmbd/nmbdworkgroupdb.c:dumpworkgroups(282)
dump_workgroups()
dump workgroup on subnet 10.2.41.22: netmask= 255.255.255.0:
CIMARRONLABEL(1) current master browser = MAIN-SERVER
MACSERVER 40819b03 (Mac OS X Server)
MAIN-SERVER 4084126b ()
... and since then eight more just like it have come up at seemingly random intervals; a second one at 2011/03/08 12:15:25
2011/03/08 14:56:28
2011/03/08 14:56:28
2011/03/08 14:59:14
2011/03/08 21:23:28
2011/03/08 21:23:28
2011/03/09 07:24:29
2011/03/09 07:24:29
I guess that worries me a bit because the problems started when an entry similar to that popped up on Monday. I'm still looking for clues as to what that "dump_workgroups" business is about; if anyone has any ideas, I'm all ears.
Thanks! -
Windows 8.1 joining domain
Fails to join domain with error:
Note: This information is intended for a network administrator. If you are not your network's administrator, notify the administrator that you received this information, which has been recorded in the file C:\WINDOWS\debug\dcdiag.txt.
The following error occurred when DNS was queried for the service location (SRV) resource record used to locate an Active Directory Domain Controller (AD DC) for domain "hali88.org":
The error was: "DNS name does not exist."
(error code 0x0000232B RCODE_NAME_ERROR)
The query was for the SRV record for _ldap._tcp.dc._msdcs.hali88.org
Common causes of this error include the following:
- The DNS SRV records required to locate a AD DC for the domain are not registered in DNS. These records are registered with a DNS server automatically when a AD DC is added to a domain. They are updated by the AD DC at set intervals. This computer is configured
to use DNS servers with the following IP addresses:
10.10.10.1
- One or more of the following zones do not include delegation to its child zone:
hali88.org
org
. (the root zone
Joining domain with Windows 7 64bit works fine.WIN7
Windows IP Configuration
Host Name . . . . . . . . . . . . : HP-AST0000467
Primary Dns Suffix . . . . . . . : hali88.org
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : hali88.org
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : hali88.org
Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller
Physical Address. . . . . . . . . : 6C-3B-E5-30-4F-6A
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::b811:b004:6a95:1628%13(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.164(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Monday, March 17, 2014 9:40:49 AM
Lease Expires . . . . . . . . . . : Tuesday, March 25, 2014 9:40:51 AM
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.65
DHCPv6 IAID . . . . . . . . . . . : 275528677
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-18-E0-0E-D7-6C-3B-E5-30-4F-6A
DNS Servers . . . . . . . . . . . : 192.168.1.65
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.hali88.org:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : hali88.org
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 12:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft 6to4 Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 9:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Teredo Tunneling Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
WIN81
Windows IP Configuration
Host Name . . . . . . . . . . . . : AST0000466
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
Wireless LAN adapter Local Area Connection* 11:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Wi-Fi Direct Virtual Adapter
Physical Address. . . . . . . . . : 1A-D2-24-31-BD-CC
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Ethernet adapter Bluetooth Network Connection:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Bluetooth Device (Personal Area Network)
Physical Address. . . . . . . . . : 48-D2-24-32-03-86
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Ethernet adapter Ethernet:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Qualcomm Atheros AR8162/8166/8168 PCI-E Fast Ethernet Controller (NDIS 6.30)
Physical Address. . . . . . . . . : 00-8C-FA-6C-5A-43
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::9578:3910:989:e14d%4(Preferred)
IPv4 Address. . . . . . . . . . . : 10.10.10.3(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Monday, March 17, 2014 6:46:24 AM
Lease Expires . . . . . . . . . . : Tuesday, March 18, 2014 6:46:24 AM
Default Gateway . . . . . . . . . : 10.10.10.1
DHCP Server . . . . . . . . . . . : 10.10.10.1
DHCPv6 IAID . . . . . . . . . . . : 251694330
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-19-A6-E2-6D-00-8C-FA-6C-5A-43
DNS Servers . . . . . . . . . . . : 10.10.10.1
NetBIOS over Tcpip. . . . . . . . : Enabled
Wireless LAN adapter Wi-Fi:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Qualcomm Atheros AR956x Wireless Network Adapter
Physical Address. . . . . . . . . : 48-D2-24-31-BD-CC
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{3137AE13-57A6-47D2-9B53-D70D67F464FC}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 2:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : 2001:0:9d38:6abd:34e3:39b1:b49c:ea41(Preferred)
Link-local IPv6 Address . . . . . : fe80::34e3:39b1:b49c:ea41%9(Preferred)
Default Gateway . . . . . . . . . : ::
DHCPv6 IAID . . . . . . . . . . . : 150994944
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-19-A6-E2-6D-00-8C-FA-6C-5A-43
NetBIOS over Tcpip. . . . . . . . : Disabled
NSLOOKUP:
WIN7 SYSTEM:
Default Server: haliserv2.hali88.org
Address: 192.168.1.65
WIN81 system:
DNS request timed out
Default server: Unknown
Address: 10.10.10.1
Active Directory entries verified.
AST0000466
User and password verified.
DCDIAG WIN81
The following error occurred when DNS was queried for the service location (SRV) resource record used to locate an Active Directory Domain Controller (AD DC) for domain "haliserv2.hali88.org":
The error was: "DNS name does not exist."
(error code 0x0000232B RCODE_NAME_ERROR)
The query was for the SRV record for _ldap._tcp.dc._msdcs.haliserv2.hali88.org
Common causes of this error include the following:
- The DNS SRV records required to locate a AD DC for the domain are not registered in DNS. These records are registered with a DNS server automatically when a AD DC is added to a domain. They are updated by the AD DC at set intervals. This computer is configured
to use DNS servers with the following IP addresses:
10.10.10.1
- One or more of the following zones do not include delegation to its child zone:
haliserv2.hali88.org
hali88.org
org
. (the root zone) -
Hi,
I am to change the domain in the client machine but I have got this
On the client, I am able to ping the domain and I've also put the IP of the domain server as DNS server like
Many Thanks & Best Regards, Hua MinThanks all.
I have done some change to one connection on the client machine
C:\Users\HuaMin>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : HMC-WIN7ENT
Primary Dns Suffix . . . . . . . : win08.huamin.com
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : win08.huamin.com
abc.com
Ethernet adapter Local Area Connection 2:
Connection-specific DNS Suffix . : abc.com
Description . . . . . . . . . . . : Intel(R) PRO/1000 MT Desktop Adapter #2
Physical Address. . . . . . . . . : 08-00-27-E7-47-33
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : ?.255.241.11(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.240.0
Lease Obtained. . . . . . . . . . : Thursday, January 16, 2014 9:38:56 AM
Lease Expires . . . . . . . . . . : Thursday, January 16, 2014 2:10:10 PM
Default Gateway . . . . . . . . . : ?.255.240.1
DHCP Server . . . . . . . . . . . : 10.17.8.2
DNS Servers . . . . . . . . . . . : 210.0.128.241
210.0.255.144
NetBIOS over Tcpip. . . . . . . . : Enabled
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) PRO/1000 MT Desktop Adapter
Physical Address. . . . . . . . . : 08-00-27-6D-E3-04
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 103.11.228.33(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.192
Default Gateway . . . . . . . . . : 103.11.228.1
DNS Servers . . . . . . . . . . . : 127.0.0.1
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.{6B6B9412-430A-409D-BB5F-3C52D6BD6B93}:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::200:5efe:103.11.228.33%13(Preferred
Default Gateway . . . . . . . . . :
DNS Servers . . . . . . . . . . . : 127.0.0.1
NetBIOS over Tcpip. . . . . . . . : Disabled
Tunnel adapter 6TO4 Adapter:
Connection-specific DNS Suffix . : abc.com
Description . . . . . . . . . . . : Microsoft 6to4 Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : ?.670b:e421::670b:e421(Preferred)
IPv6 Address. . . . . . . . . . . : ?.71ff:f10b::71ff:f10b(Preferred)
Default Gateway . . . . . . . . . : ?.c058:6301::c058:6301
DNS Servers . . . . . . . . . . . : 210.0.128.241
210.0.255.144
NetBIOS over Tcpip. . . . . . . . : Disabled
Tunnel adapter isatap.abc.com:
Connection-specific DNS Suffix . : abc.com
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::200:5efe:?.255.241.11%15(Preferre
d)
Default Gateway . . . . . . . . . :
DNS Servers . . . . . . . . . . . : 210.0.128.241
210.0.255.144
NetBIOS over Tcpip. . . . . . . . : Disabled
Tunnel adapter Teredo Tunneling Pseudo-Interface:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
But I still get the same when changing the domain.
Note: This information is intended for a network administrator. If you are not your network's administrator, notify the administrator that you received this information, which has been recorded in the file C:\Windows\debug\dcdiag.txt.
The following error occurred when DNS was queried for the service location (SRV) resource record used to locate an Active Directory Domain Controller (AD DC) for domain "my-friend.co":
The error was: "DNS name does not exist."
(error code 0x0000232B RCODE_NAME_ERROR)
The query was for the SRV record for _ldap._tcp.dc._msdcs.my-friend.co
Common causes of this error include the following:
- The DNS SRV records required to locate a AD DC for the domain are not registered in DNS. These records are registered with a DNS server automatically when a AD DC is added to a domain. They are updated by the AD DC at set intervals. This computer is configured
to use DNS servers with the following IP addresses:
127.0.0.1
210.0.255.144
210.0.128.241
- One or more of the following zones do not include delegation to its child zone:
my-friend.co
co
. (the root zone)
Many Thanks & Best Regards, Hua Min -
Search help is domain or dataelement
plz tellme
Hi,
The values of a domain will determine the values of the Search help. In the Se11 transaction key in a domain and select the display function. Go to the Values tab and it will specify a Value table / Intervals / Single values for a Domain. But definitly there is a restriction on the no. of single values / Intervals that can be specified.
If you programatically need the values of a domain use the Function module STF4_GET_DOMAIN_VALUE_TEXT. Pls check my reply in the following thread:
date problem
Hope it clears your doubt well. Reward points if helpful.
- Irudayaraj Peter -
I need help regarding measurement of "time domain parameters of Heart rate variability" using labview.
I am using Labview 8 ... I need to develop a software to accquire the ECG data (simulated enironment ) and compute the time domain parameters of Heart rate variability like "SDNN, SDANN...etc". Can some 1 plllzzzz help me out.Plzz help me if u can.Thanx in advance.Hi Andy,
Thanx for responding. The input is from a text file. SDNN, SDANN,etc are the timedomain parameters of heart rate variability.
SDNN: the standard deviation of the NN or RR interval i.e. the square root of variance.
SDANN:the standard deviation of the averageNN interval calculated over short periods, usually 5 min,which is an estimate of the changes in heart rate due tocycles longer than 5 min
SDNN index, the meanof the 5-min standard deviation of the NN intervalcalculated over 24 h,
RMSSD: the square root ofthe mean squared differences of successive NN intervals
NN50: the number of interval differences of successiveNN intervals greater than 50 ms, and
pNN50 the proportionderived by dividing NN50 by the total numberof NN intervals.
The problem is dat I am a fresher to the world of Labview. I have jus recently started working on it. Can u please suggest me some some idea as soon as possible.
As i said I have the ECG data in the form of text files..I need to create sort of GUI to calculate the time domain parmeters....I need help urgently. Plzzz help me if u can. If u have and .vi example to calculate the RR interval plzz send it to me ASAP.
Thanku -
Unable to join virtual machines to domain controller
Hello all
I am studying for MCSE 2012 R2 and have decided to move from VMware Esxi 5.5 to Hyper-V in Server 2012R2.
I built the host (Server 2012r2) and so far 3 VMs (all are Server 2012R2 VMs) . I promoted one of the VMs to a Domain controller and things appear to have installed with no issue. This is what I have done so far:
Added Static IP addresses for all VMs
Configured each VM's DNS setting to use the DC
When I try to join one of the virtual servers to the domain controller this is what I get.
Note: This information is intended for a network administrator. If you are not your network's administrator, notify the administrator that you received this information, which has been recorded in the file C:\Windows\debug\dcdiag.txt.
The following error occurred when DNS was queried for the service location (SRV) resource record used to locate an Active Directory Domain Controller (AD DC) for domain "wolfpack.local":
The error was: "DNS name does not exist."
(error code 0x0000232B RCODE_NAME_ERROR)
The query was for the SRV record for _ldap._tcp.dc._msdcs.wolfpack.local
Common causes of this error include the following:
- The DNS SRV records required to locate a AD DC for the domain are not registered in DNS. These records are registered with a DNS server automatically when a AD DC is added to a domain. They are updated by the AD DC at set intervals.
This computer is configured to use DNS servers with the following IP addresses:
10.0.0.14
- One or more of the following zones do not include delegation to its child zone:
wolfpack.local
local
. (the root zone)
Phil BalderosHi Phil,
I have noticed that the domain is wolfpack.local but two VMs has another DNS suffix "home.network" .
Please remove it and join it to domain again .
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.
Hello Elton and thank you for the response.
I was looking at that same setting on my VM and its empty.
Phil Balderos
Maybe you are looking for
-
How do you keep your iPhones and iPads separate under the same apple id
I have a family of iPhones and iPads and one apple ID, well needless to say each device is getting face time calls and text messages from eachother. I might add it makes for some pretty interesting conversations. I would like to learn how to keep eac
-
hello, I have recently acquired my son's old iPhone 5, how can I change the iCloud account on the phone from his to mine?
-
i want to change my ringtone but i am not able to find "show in finder" as i could proceed with my work, so i want to know how could i do it? please help me! also provide me all the steps for changing the ringtone.
-
Max. amount of nodes in feature SCHKZ in ERP2004/2005
Hello, I'm utilizing feature SCHKZ for IT0007. The structure is like field WERKS (10001, 10002, 1003, etc.) --> PERSK (if 10 then NORM or else then STAN) So there are two levels and no includes, just "simple" fields and return values. My concer
-
Truncate table loses privs on table...
Oracle11g/RHEL5 Hi, We have a table that is inserted into a then deleted every so often. The current method that was being used to remove the rows was the TRUNCATE TABLE ption. However, we found out that when that statement is issued, that any user t