Interview questions on XI-- where i was not able to answer
Hi XI Experts
Recently i attended <b><u>interview for XI</u></b>...these are the following questions i was not able to answer pls...help on this
Q's are
1) Is the BPM must start with receive step ? why? or i can start with any step ?
Explain me in detail ?
2) how to set up the Adapter Specific Parameters ? Where ? Why ? explain
3) Can you write the java mapping for creating the dynamically new id for new
employ automatically ?
4) How to upgrade the XI 3.0 form sp 17 to sp 19? step by step expalin in detail?
5) How you will check the XI performance ? what should you do on that if
performance is low? explain indetail ?
These are the some of the questions very i was not able to answer properly
I hope u experts can help me on this
Adv thanks and regards to all
Kiran LVS
>> Is the BPM must start with receive step ? why? or i can start with any step ?
Not necessarily. If receive is not your first step, it should be the first step with in a loop. Means a loop can be the first step.
From SAP help : <i>Insert the receive step to start a process as the first step of the process or as the first step of a fork, a block, or a loop</i>
But since the receive step starts the IP, it should be present with in the loop as the first step.
>>) how to set up the Adapter Specific Parameters ? Where ? Why ? explain
Sender cc -->ID. Check the check box "Adapter specifc Identifiers"
>>How to upgrade the XI 3.0 form sp 17 to sp 19? step by step expalin in detail?
I guess this is more of a Tech consultant's job than a Developers'.
>>Performace?
You can use the Performance monitoring option in RWB. If you find the performance too low, you can check for any running BPM instances(for days with out proper correlation) and end them. Try increasing the throughput ie. if a large amount of data is processed over a small time and the rest of the time your XI is idle. You can try to minimize such conditions.
Regards,
Jai Shankar
Message was edited by:
Jai Shankar
Similar Messages
-
Various questions related to itunes that was not able to see around
well...i will try to be quick and as clear as possible
1) i have a macbook, where i download podcasts and i use it to listen to my collection of music, saved on an external drive....now i have no more space there, so i was thinking to move on external drive so i can access to the podcasts and the other contents from my mac pro and from the macbook; and i wonder: is there a way to do that? because when i moved the files i lost all the info related to the podcasts, so even if i ahve the file on teh computer, the podcast page was telling me that the file was not there and was asking to download it)
2) i have stuff that i bought on itunes, but since i format and reinstalled the OS on my computers, it consider them as different computers, so now i can't move anymore my files because each file was authorized to teh maximum number...is there a way to avoid this issue that, more that protecting the music from thief, is ******* off people that bought the music and videos (i was tempted to buy the mp3 from russian sites and pay them 3 bucks for each album, without protection).
3) informations of the MP3: basically what itunes did, was to rename the files itself, instead of simply create a dir and rename the ID tags of the file, so i have basically lost the author and the song name (was in the name, that now is track_1.mp3 in the unknown artist folder); so just as suggestion...please include an option to overwrite only the ID tags and not touch the filename (like windows media player does).
4) covers: many of the albums that i own, are ripped from my cd's, adn they are not sold on itunes, so i have no cover for them....why Apple does not include a server where the users can upload their covers and album info, so other people can get these info (something like a music database used, again, by WM player) even if they are not sold on itunes? since itunes is a multimedia player, before being a money machine for ipod owners; so i would expect the software more user oriented, isntead of being store oriented (sorry, we don't sell it so is your problem to find the info of the id tag and the cover); otherwise i do not really have a reason to use itunes, since i own a creative player and wmp works just fine...but i need to load parallels every time that i wanna listen music, and that is insane! (i do not want an ipod, since all my files came from pc, and unless DIVX and WMV became supported formats i will not buy an ipod)
If somebody can help me would really appreciate; and if some itunes people can read this would also be great, so you understand that unless you care only about who has an ipod, other people want to use itunes for their files and videos and buy music and other stuff, but they also want to be able to live without dealing with an ipod and with minor flaws in the software
Thanks!Thanks Pascal for the reply.
1) i found a way to trick the itunes: basically you keep the library in one place, then you make a mirrored folder on an external drive (you need to buy a software, since, for reason unknown to the ordinary mortal people, Mac OS does not have sync folders like Windows), in this way, when you add or remove or rate songs, the library on one computer will be updated with the info on the other one, and both will have the same informations.... so you can have the same library on the home computer, at work and on your laptop
Maybe somebody at itunes will read this and will figure out to implement something like this in the new build, because nobody has one computer and keep the library in one place... not the majority of the people.
2) need to do that
3)thanks anyway
4) seems that the best solution is to download the artworks using WMP, so you can have also the mp3 tags filled with the right info, then you move on itunes and get teh artworks images that WMP saved and import them into itunes.
In this way you have either the artworks and the id tags that are correct. -
Revision: 8435
Author: [email protected]
Date: 2009-07-07 15:38:03 -0700 (Tue, 07 Jul 2009)
Log Message:
While responding to a forum question, I realized ItemRenderer.getCurrentRendererState() was not documented. This is needed since developers will override this method to add/customize their renderer's state behavior if it differs from the default.
QA: No
Doc: No
Checkintests: Pass
Reviewer: me
Modified Paths:
flex/sdk/trunk/frameworks/projects/spark/src/spark/components/supportClasses/ItemRenderer .aslov2bugu, you said things the exact way I wanted to express them! It was like watching me talking to a SONY’s CEO.
I don’t really think they are not aware of the problems. SONY used to be the 27th largest company in the world, according to Forbes. They are now at the 456th place!!
They are aware of their problems and I think, the move to buy the remaining stocks from Ericsson, is a move to bounce back into the market. They found the right time, where the stock is too low and the economics around the globe don’t look promising enough. I have to recognize them, all the bad phases they went into this year … hacking attack, loss of their factory in London, global economic climate etc.
But these are not excuses good enough not to produce quality, reliable and technologically advanced goods. I think that SONY is not to blame for the bad course SE has had. I think this is what SONY wants to revert. They want to “embody” all their technology … BRAVIA engines (TV Tech), Walkman and Cybershot tech (using Carl Zeiss lenses), VAIO (Comp tech) and finally PS3. Ericsson tried to integrate them, unsuccessfully.
Overall, I thing SONY, did not have or did not attempt to have the control of SE, hence, the answer you got back from SONY “… anything related to SE must be posted on the website of SE”. I think they will bounce. Just give ‘em some time. I’m willing to give them time, but not too much though. Just because I’ve always loved this brand! -
[svn:osmf:] 14823: Fix bug where canPause was not set to false for live streams.
Revision: 14823
Revision: 14823
Author: [email protected]
Date: 2010-03-17 10:51:40 -0700 (Wed, 17 Mar 2010)
Log Message:
Fix bug where canPause was not set to false for live streams.
Modified Paths:
osmf/trunk/framework/OSMF/org/osmf/net/NetStreamPlayTrait.as
osmf/trunk/framework/OSMFTest/org/osmf/elements/TestVideoElement.asThanks for looking at this post. We have resolved the issue for ourselves by working with our DBAs to narrow down where the problem actually started. We found that the particular SQL we were looking at was not the issue. In a chart on a subsequent page (via a click through), we were actually running into where apex was starting to consuming memory but we were catching it later.
What we found was that when we had a chart query that was SQL containing a pipeline function, the memory usage went up. And within 10 minutes, the server would crawl to a halt. To release the memory, the DBAs would have to bounce the Apex instance. When I changed the query to be a function returning SQL, the problem stopped. I don't know what the correlation was between SQL and moving to a PL/SQL function returning SQL.
I am not even 100% positive of the pipeline function being the cause. I only know that this started happening about the same time as when I implemented the pipeline function. I understand you are leery of a one-second function/query running up that kind of utilization. No one here believed me either (including me really). We figured it HAD to be a coincidence. But once I changed the query from SQL to a function returning PL/SQL, our problem went away.
Thanks to all who looked at and thought about this.
Walter -
Just to version 7.Like all updates,ad-ons get disabled.The ad-ons that was disabled,where I am not able to open my emails.Why can't FireFox have updates without disabling ad-ons we need to work with?
''guigs2 [[#answer-672422|said]]''
<blockquote>
NoScript stops cookies, please disable this addon/extension as well as make sure that the language en-us is installed.
# 1) Open up the Firefox Preferences tab. You can do this by typing about:preferences in the URL bar.
# 2) Click "Content"
# 3) Next to "Languages", click "Choose"
# 4) Select "English/United States [en-us]", click "Add"
# 5) re-open "about:accounts"
# 6) Click "Get Started"
</blockquote>
Thank you for replying. Unfortunately, I already did all of these things. As you can see from the below screenshot, the language is already set. Also, this screenshot was taken in Safe Mode, so NoScript is not enabled. About:accounts still says I need to enable cookies for some reason. So, this solution didn't work.... -
Previous version of Firefox always remembered where I was. not Firefox 4. Why?
Windows 7 platform, Firefox 4. I have set up options in startup to go to "show my windows and tabs from last time". If I close my session of browsing, with laptop staying on, I go back into Firefox with the previous website there. If I shutdown my laptop, however, and I restart my laptop, it takes me to the defauilt website. Previous version of Firefox always remembered where I was. not Firefox 4. Why?
Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html -
Hello, can someone help me: my eMac G4 700 MHz. I can not boot it. If he starts appears on the screen, only a small "folder with a question mark." The Mac was not used 1 year.
Question 1: Problem = hard drive?
Question 2: Problem = PRAM battery?
the
What can I do to boot?Restart with the Option key held down.
If the internal drive shows up, it's the PRAM battery.
If it doesn't, insert a compatible Mac OS 9 or X install disk, click the button with the circular arrow, and either repair the internal drive or install a new OS on it. If it doesn't show up in Disk First Aid(9) or the Disk Utility(X), it's either not plugged in or needs to be replaced.
(97530) -
I tried to change the metadata date. It changed the date on my photo, but when I checked the box that said "also change my original file", it gave me this error message.
Unable to change original file. Aperture was not able to adjust the date and time of the original file “01769_p_h13ajyrm4bm0944.jpg” because it is locked or you do not have permission to modify it.
Wassup?What is your Aperture version? The older versions of Aperture 3 had a problem to apply Metadata changes to the original file.
If you are using the current version Aperture 3.4.5, try to repair the permissions on your Aperture library, if you have not already done so:
Launch Aperture with the key combination ⌥⌘ held down and select "Repair Permissions" from the First Aid PAnel, that will appear.
If that does not help, post back with more information on your original files - are the referenced or managed? Where is your Aperture library located? Since when do you have this problem? And what did you do directly before noticed the problem for the first time?
Regards
Léonie -
Hi,
I have upgraded my iphone 5 to new iOS7 where I see that we have a new shorcut feature Control Center to turn on Wifi, Blutooth, Air Play etc..In the same we have for MUSIC where I am not able to pause or stop music and also cant go to next track and issue withe those buttons.
Please let me know any seetings needs to changed.
Thanks
NiranjanLast point...who archives? On my regular email page I now have the Archive icon to the left of my Delete icon which I would prefer was to the left, first in the line as this is the icon I use mostly. With Folders, my Sent and Trash lists, who needs to archive?
I can help you only with the placement of the icon placement -- if you right-mouse click on the toolbar, then select Customize Toolbar, you can move an icon to where you want it to be. -
Edited/commented on PDF using Adobe Reader iphone 5 and e-mailed to myself so I could review on PC laptop. I opened on laptop and although I could see the comment bubbles, I was not able to open them to see the comments.
Back to life**
Oh I know there are many other vocabulary mistakes but never mind them I was just too excited when I wrote all of that while typing very quickly
P.S: if you have any question then ask and please do tell me if it works or not with u but I'm definitely sure it'll work so tell me this and we'll get excited together
Also if you have an experience to share then do share it as well please.
Peace -
Backwards Compatibility mapper module was not able to start
Hi ,
We have an issue with our SCOM 2012 agents not getting discovered because the Backwards Compatibility mapper module was not able to start.
I checked few blogs and could see the remediation for SCOM 2007 SP1.
http://blogs.msdn.com/b/mariussutara/archive/2008/03/11/backwards-compatibility-mapper-fails-to-start-event-on-opsmgr-2007-sp1.aspx
These are in the DMZ zone and are manually installed. i have bounced the health service folder as remediation but still looks the same.
For test i have set the mssing NetBios name for the server and restarted the service. Still the server is not getting discovered and shows the below error.
Log Name: Operations Manager
Source: HealthService
Date: 12/8/2014 6:13:23 PM
Event ID: 1103
Task Category: Health Service
Level: Warning
Keywords: Classic
User: N/A
Computer: Server.cc.domain
Description:
Summary: 1 rule(s)/monitor(s) failed and got unloaded, 1 of them reached the failure limit that prevents automatic reload. Management group "MG Group name". This is summary only event, please see other events with descriptions of unloaded rule(s)/monitor(s).
Log Name: Operations Manager
Source: Health Service Modules
Date: 12/8/2014 6:13:23 PM
Event ID: 10720
Task Category: None
Level: Warning
Keywords: Classic
User: N/A
Computer: Server.cc.domain
Description:
The Backwards Compatibility mapper module was not able to start because discovery has not fully completed for this Health Service. This is a transient issue, the affected rule(s) will be unloaded and the Health Service will restart them when initialization
is complete.
One or more workflows were affected by this.
Workflow name: System.Mom.BackwardCompatibility.ServiceStateMonitoring
Instance name: Server.cc.domain
Instance ID: {E0B732FD-3908-E52B-2EAD-813F42F0C48E}
Management group: MG Group name
Jesty SamHi Jesty,
Based on the Article it seems to be for SCOM 2007 SP1.
And as you mentioned you are using SCOM 2007 R2. I see that Microsoft has fixed this issue about the article you have mentioned above.
Below is the article from MS for that.
951380 Some
computer properties for a cluster node may not be collected by the discovery process in System Center Operations Manager 2007 Service Pack 1
Check the below link where MS has mentioned it has fixed this issue in SCOM 2007 R2.
http://support.microsoft.com/kb/971410
So i dont think it is necessary for
you to install this Hotfix
Gautam.75801 -
Hi , I have tried to download a paid app on my new ipad ,the response pop out as: payment is temporarily unavailable .please try later". Since then I was not
able to download any free app , as the same response continues pop out . I have already update ny billing address as advise by the apple itune supportFOR ASSISTANCE WITH ORDERS - iTUNES STORE CUSTOMER SERVICE
For assistance with billing questions or other order inquiries, please refer to our online support page by clicking here: http://www.apple.com/support/itunes/store/. If you cannot find the answers you are seeking in our robust knowledge base, you can contact us by visiting the following URL http://www.apple.com/support/itunes/store/, clicking on the appropriate Customer Service topic, then using the contact button or email form at the bottom of the page. Responses to emails will be provided as soon as possible.
Phone: 800-275-2273 How to reach a live person: Press 0 four times
Hours of Operation: Mon-Fri: 9am-5pm ET
Email: [email protected]
How to report an issue with Your iTunes Store purchase
http://support.apple.com/kb/HT1933
How to Get a Refund from the App Store
http://gizmodo.com/5886683/how-to-get-a-refund-from-the-app-store
Cheers, Tom -
i get an error message saying "system overload, the audio engine was not able to process all the required data in time (10011)
The thing is, that error message has been appearing when playing/recording a track that was running perfectly a few minutes ago and nothing has changed!
That can mean, that your project is too ambitious for your Mac. Are you using many complicated automations on that track?
4GB memory is not much, when doing audio processing. GarageBand will need all memory it can get, or will be forced to continually swap pages to your disk, to free RAM, and that can cause this error.
When this error occurs, it is best to restart the computer. This will free your RAM. Close all other applications that are competing for memory, i.e. other multimedia applications, and Safari.
Also, make sure, that you have plenty of free disk space. Don't let the free disk space drop below 20G.
Where is your project located? On an external drive or your internal drive? If it is on an external drive, connect this drive directly, not daisy-chained, or move the project to your internal drive.
I got up to eat, came back and tried to continue but GarageBand shuts down and displays that message every time I try to run the song. I've also recently run songs with several more tracks than this one and they worked perfectly. Any tips?
Are your other projects, that worked perfectly, still working? -
Project was not able to connect to project server
We have a user running Project 2007 who gets the following error when trying to open Project:
"Project was not able to connect to project server because of the following error: the credentials you used to login may not be correct."
The users PC had been disjoined and rejoined to our domain to fix a separate issue and since doing that she is getting this error when trying to open project. We have confirmed her network credentials are good and she is able to access other network resources
with no problem.
Thanks
Hank VareSorry for the abbreviation used, by PWA i mean Project Web Access, which is the other interface for Project server essentially the IE where you open the Project Web App
I asked this based on the assumption given the error "Project was not able to connect to project server "
Hence assuming you are trying to connect to project server and you have a project server environment, if that's not the case and you are working standalone then navigate to Start >> All programs >> Microsoft office >> Microsoft Office tools
>> Microsoft Project Server Accounts >> Select the computer and Set it as default
Thanks | epmXperts | http://epmxperts.wordpress.com -
TS3694 I was not able to complete my update because of a unknown error code . What does that mean
what does code mean. I was not able to complete my update
Hey norman184,
Thanks for the question. I see you came from the most relevant article, so you are definitely on the right track. Here is what I found in regards to error 6:
Errors related to third-party security software
Error 2, 4 (or -4), 6, 1000, 9006
1. Follow the steps to troubleshoot security software. Often, uninstalling third-party security software will resolve these errors.
2. There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. An incorrectly set default packet size can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
3. Verify that access to ports 80 and 443 are allowed on your network.
4. Verify that communication to albert.apple.com or phobos.apple.com isn't blocked by a firewall or other Internet security setting.
5. Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under "Advanced steps > Rename, move, or delete the iOS software file (.ipsw)" below for file locations.
6. Restore your device while connected to a different network.
7. Restore using a different computer.
For full details and additional information, see this article:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
Thanks,
Matt M.
Maybe you are looking for
-
BI JAVA Installation require EP CORE ,EP
Hello, While installation BI JAVA with sapinst ( version 7 ) requires EP CORE ,EP Can we install BI java only by using EP Core and EP installed on diff. host. ( another system) Thanks in advance. Regards, Tushar
-
I'm trying to upgrade the iOS for my iPad 2 and I can't because it will delete all my purchased apps since the computer I'm using can't be activated. My old desktop has no access to the Internet anymore and my laptop is fried so I don't have the abil
-
I have lost all my notes data after restore. Anyone know how to retrieve notes after restore?
I have lost all my notes data after restore. Anyone know how to retrieve notes after restore? I havent' took any backup of my notes in icloud. The moment I enter the password after restore my notes will be empty. The only option to get notes back is
-
HI All, I have installed oracle 10g r2. I would like to install OWB on my desktop. Could anybody share any installation document for that? Regards, sri
-
Why are some of my old files on my mac after I do a complete restore?
Whenever I get a new Mac or I restore my old one some of my old files such as music photos and movies are on my new one. I think it is auto saving some of my email attachments. It seems a lot of the images where ones that I took or veiwed with my I