Interview quistion check log files
friends
what is check log files
rgs
Message was edited by:
chinna chinna
Adding to Harish's answers,
Logs are written in any code to find the reason for the error/warning caused by the program.
For instance, if any program is not being run, the logs comes handy in narrowing down the problem and to resolve the issues at the earliest.
Taking automatic payment run example - u have proposal and payment logs. The reasons are to find why a proposal or payment has not been happ. If such logs are not in place, user cannot find the reason and hence the solution.
<i>Pls. assign points, if useful</i>
Regards,
Sridevi
Similar Messages
-
Internal error has occurred. Check log files for details.
While configuring software library on OEM 11g grid control, i get the error as Internal error has occurred. Check log files for details.
On checking emoms.trc i see the following error
2011-08-08 22:15:13,298 [EMUI_22_15_13_/console/provision/admin/admin] ERROR em.provis
ion checkAllSoftwareLibLocs.216 - AdminUtil:checkAllSoftwareLibLocs: No software libra
ry locations configured.
2011-08-08 22:15:13,320 [EMUI_22_15_13_/console/provision/admin/admin] ERROR em.provis
ion handleValidateLocsSoftwareLib.1754 - AdminController:handleValidateLocsSoftwareLib
: ComponentException while fetching all software library locations from repostiory.
oracle.sysman.emgc.provision.component.ComponentException: Software Library location i
s not configured.
at oracle.sysman.emgc.provision.ui.model.admin.AdminUtil.checkAllSoftwareLibLo
cs(AdminUtil.java:218)
at oracle.sysman.emgc.provision.ui.model.admin.AdminUtil.checkAllSoftwareLibLo
cs(AdminUtil.java:146)
at oracle.sysman.emgc.provision.ui.controller.admin.AdminController.handleVali
dateLocsSoftwareLib(AdminController.java:1746)
at oracle.sysman.emgc.provision.ui.controller.admin.AdminController.handleEven
t(AdminController.java:397)
at oracle.sysman.emSDK.svlt.PageHandler.handleRequest(PageHandler.java:578)
at oracle.sysman.emgc.provision.ui.controller.AbstractProvisioningPageHandler.
handleRequest(AbstractProvisioningPageHandler.java:235)
at oracle.sysman.emSDK.svlt.EMServlet.myDoGet(EMServlet.java:738)
at oracle.sysman.emSDK.svlt.EMServlet.doGet(EMServlet.java:329)
at oracle.sysman.eml.app.Console.doGet(Console.java:352)
at oracle.cabo.servlet.UIXServlet.doPost(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubS
ecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelp
er.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:311)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.core.app.exception.EMRuntimeExceptionFilter.doFilter(EMRuntim
eExceptionFilter.java:58)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.emas.fwk.MASConnectionFilter.doFilter(MASConnectionFilter.jav
a:41)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.eml.app.BrowserVersionFilter.doFilter(BrowserVersionFilter.ja
va:122)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.emSDK.svlt.EMRedirectFilter.doFilter(EMRedirectFilter.java:10
2)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:502
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:159)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:326)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.
java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(
WebAppServletContext.java:3592)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubje
ct.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServlet
Context.java:2202)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext
.java:2108)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:14
32)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
2011-08-08 22:24:58,397 [EMUI_22_24_58_/console/provision/admin/edit_sw_lib_dir_config
uration] ERROR svlt.PageHandler handleRequest.640 - java.lang.NoClassDefFoundError: Co
uld not initialize class oracle.sysman.oii.oiip.osd.unix.OiipuUnixOps
java.lang.NoClassDefFoundError: Could not initialize class oracle.sysman.oii.oiip.osd.
unix.OiipuUnixOps
at oracle.sysman.oii.oiip.oiipg.OiipgFileSystem.getVolumeName(OiipgFileSystem.
java:615)
at oracle.sysman.eml.swlib.bitstore.FileBitStore.getFreeSpaceInKB(FileBitStore
.java:1044)
at oracle.sysman.eml.swlib.LibraryServiceImpl.getFreeSpaceInKB(LibraryServiceI
mpl.java:1572)
at oracle.sysman.emgc.provision.impl.component.SoftwareLibraryImpl.getFreeSpac
eInKB(SoftwareLibraryImpl.java:2582)
at oracle.sysman.emgc.provision.impl.component.ComponentManagerImpl.getFreeSpa
ceInKB(ComponentManagerImpl.java:664)
at oracle.sysman.emgc.provision.ui.model.admin.SoftwareLibContext$OkButton.han
dleClickEvent(SoftwareLibContext.java:860)
at oracle.sysman.emgc.provision.ui.controller.AbstractProvisioningPageHandler.
handleEvent(AbstractProvisioningPageHandler.java:427)
at oracle.sysman.emgc.provision.ui.controller.admin.SoftwareLibController.hand
leEvent(SoftwareLibController.java:53)
at oracle.sysman.emSDK.svlt.PageHandler.handleRequest(PageHandler.java:578)
at oracle.sysman.emgc.provision.ui.controller.AbstractProvisioningPageHandler.
handleRequest(AbstractProvisioningPageHandler.java:235)
at oracle.sysman.emSDK.svlt.EMServlet.myDoGet(EMServlet.java:738)
at oracle.sysman.emSDK.svlt.EMServlet.doGet(EMServlet.java:329)
at oracle.sysman.eml.app.Console.doGet(Console.java:352)
at oracle.cabo.servlet.UIXServlet.doPost(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubS
ecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelp
er.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:311)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.core.app.exception.EMRuntimeExceptionFilter.doFilter(EMRuntim
eExceptionFilter.java:58)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.emas.fwk.MASConnectionFilter.doFilter(MASConnectionFilter.jav
a:41)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.eml.app.BrowserVersionFilter.doFilter(BrowserVersionFilter.ja
va:122)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.emSDK.svlt.EMRedirectFilter.doFilter(EMRedirectFilter.java:10
2)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:502
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:159)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:326)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.
java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(
WebAppServletContext.java:3592)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubje
ct.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServlet
Context.java:2202)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext
.java:2108)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:14
32)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)Hi, I followed all the steps correctly and also the owner of the directory is correct.
But i have not installed the patches which is listed at the bottom of the link page.
I had done this on RHEl and i had no problem but now i am getting problem on solaris. -
How often do log monitors check log files?
Hello all, just wondering if there was a set interval that SCOM checks log files when you set up a simple log monitor. Is there an interval somewhere I'm not seeing? Or how does that work?
Please see: https://social.technet.microsoft.com/Forums/systemcenter/en-US/ee74e8b6-623a-41ee-abb4-54a98d017000/scom-2012-polling-interval-faster-for-monitoring-network
But not every param of monitor can be changed and it can be hardcoded in MP...and only way to change this param is to recreate MP ..
usually Param Interval (sec) or Frequency is
used to modify that property (polling interval) in overrides."
Cheers,
Martin
Blog:
http://sustaslog.wordpress.com
LinkedIn:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose. -
Got 'bea.jolt.ServiceException: Data conversion failed; check log file'
Got CHECK APPSERVER LOGS. THE SITE BOOTED WITH INTERNAL DEFAULT SETTINGS, BECAUSE OF: bea.jolt.ServiceException: Data conversion failed; check log file
when started PIA and login screen appeared.What version of PeopleTools are you using? Have you looked at E-AS: Error "Cannot find or open field table. Maybe FIELDTBLS32 is not set properly" (Doc ID 660607.1) yet?
-
Help with Script created to check log files.
Hi,
I have a program we use in our organization on multiple workstations that connect to a MS SQL 2005 database on a Virtual Microsoft 2008 r2 Server. The program is quite old and programmed around the days when serial connections were the most efficient means
of connection to a device. If for any reason the network, virtual server or the SAN which the virtual server runs off have roughly 25% utilization or higher on its resources the program on the workstations timeout from the SQL database and drop the program
from the database completely rendering it useless. The program does not have the smarts to resync itself to the SQL database and it just sits there with "connection failed" until human interaction. A simple restart of the program reconnects itself
to the SQL database without any issues. This is fine when staff are onsite but the program runs on systems out of hours when the site is unmanned.
The utilization of the server environment is more than sufficient if not it has double the recommended resources needed for the program. I am in regular contact with the support for the program and it is a known issue for them which i believe they do not
have any desire to fix in the near future.
I wish to create a simple script that checks the log files on each workstation or server the program runs on and emails me if a specific word comes up in that log file. The word will only show when a connection failure has occurred.
After the email is sent i wish for the script to close the program and reopen it to resync the connection.
I will schedule the script to run ever 15 minutes.
I have posted this up in a previous post about a month ago but i went on holidays over xmas and the post died from my lack or response.
Below is what i have so far as my script. I have only completed the monitoring of the log file and the email portion of it. I had some help from a guy on this forum to get the script to where it is now. I know basic to intermediate scripting so sorry for my
crudity if any.
The program is called "wasteman2G" and the log file is located in \\servername\WasteMan2G\Config\DCS\DCS_IN\alert.txt
I would like to get the email side of this script working first and then move on to getting the restart of the program running after.
At the moment i am not receiving an error from the script. It runs and doesn't complete what it should.
Could someone please help?
Const strMailto = "[email protected]"
Const strMailFrom = "[email protected]"
Const strSMTPServer = "mrc1tpv002.XXXX.local"
Const FileToRead = "\\Mrctpv005\WasteMan2G\Config\DCS\DCS_IN\alert.txt"
arrTextToScanFor = Array("SVR2006","SVR2008")
Set WshShell = WScript.CreateObject("WScript.Shell")
Set objFSO = WScript.CreateObject("Scripting.FileSystemObject")
Set oFile = objFSO.GetFile(FileToRead)
dLastCreateDate = CDate(WshShell.RegRead("HKLM\Software\RDScripts\CheckTXTFile\CreateDate"))
If oFile.DateCreated = dLastCreateDate Then
intStartAtLine = CInt(WshShell.RegRead("HKLM\Software\RDScripts\CheckTXTFile\LastLineChecked"))
Else
intStartAtLine = 0
End If
i = 0
Set objTextFile = oFile.OpenAsTextStream()
Do While Not objTextFile.AtEndOfStream
If i < intStartAtLine Then
objTextFile.SkipLine
Else
strNextLine = objTextFile.Readline()
For each strItem in arrTextToScanFor
If InStr(LCase(strNextLine),LCase(strItem)) Then
strResults = strNextLine & vbcrlf & strResults
End If
Next
End If
i = i + 1
Loop
objTextFile.close
WshShell.RegWrite "HKLM\Software\RDScripts\CheckTXTFile\FileChecked", FileToRead, "REG_SZ"
WshShell.RegWrite "HKLM\Software\RDScripts\CheckTXTFile\CreateDate", oFile.DateCreated, "REG_SZ"
WshShell.RegWrite "HKLM\Software\RDScripts\CheckTXTFile\LastLineChecked", i, "REG_DWORD"
WshShell.RegWrite "HKLM\Software\RDScripts\CheckTXTFile\LastScanned", Now, "REG_SZ"
If strResults <> "" Then
SendCDOMail strMailFrom,strMailto,"VPN Logfile scan alert",strResults,"","",strSMTPServer
End If
Function SendCDOMail( strFrom, strSendTo, strSubject, strMessage , strUser, strPassword, strSMTP )
With CreateObject("CDO.Message")
.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/sendusing") = 2
.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpserver") = strSMTP
.Configuration.Fields.item("http://schemas.microsoft.com/cdo/configuration/smtpauthenticate") = 1 'basic
.Configuration.Fields.item("http://schemas.microsoft.com/cdo/configuration/sendusername") = strUser
.Configuration.Fields.item("http://schemas.microsoft.com/cdo/configuration/sendpassword") = strPassword
.Configuration.Fields.Update
.From = strFrom
.To = strSendTo
.Subject = strSubject
.TextBody = strMessage
On Error Resume Next
.Send
If Err.Number <> 0 Then
WScript.Echo "SendMail Failed:" & Err.Description
End If
End With
End FunctionThankyou for that link, it did help quite a bit. What i wanted was to move it to csript so i could run the wscript.echo in commandline. It all took to long and found a way to complete it via Batch. I do have a problem with my script though and you might
be able to help.
What i am doing is searching the log file. Finding the specific words then outputting them to an email. I havent used bmail before so thats probably my problem but then im using bmail to send me the results.
Then im clearing the log file so the next day it is empty so that when i search it every 15 minutes its clean and only when an error occurs it will email me.
Could you help me send the output via email using bmail or blat?
@echo off
echo Wasteman Logfile checker
echo Created by: Reece Vellios
echo Date: 08/01/2014
findstr "SRV2006 & SRV2008" \\Mrctpv005\WasteMan2G\Config\DCS\DCS_IN\Alert.Txt > c:\log4mail.txt
if %errorlevel%==0 C:\Documents and Settings\rvellios\Desktop\DCS Checker\bmail.exe -s mrc1tpv002.xxx.local -t [email protected] -f [email protected] -h -a "Process Dump" -m c:\log4mail.txt -c
for %%G in (\\Mrctpv005\WasteMan2G\Config\DCS\DCS_IN\Alert.Txt) do (copy /Y nul "%%G")
This the working script without bmail
@echo off
echo Wasteman Logfile checker
echo Created by: Reece Vellios
echo Date: 08/01/2014
findstr "SRV2006 & SRV2008" \\Mrctpv005\WasteMan2G\Config\DCS\DCS_IN\Alert.Txt > C:\log4mail.txt
if %errorlevel%==0 (echo Connection error)
for %%G in (\\Mrctpv005\WasteMan2G\Config\DCS\DCS_IN\Alert.Txt) do (copy /Y nul "%%G")
I need to make this happen:
If error occurs at "%errorlevel%=0" then it will output the c:\log4mail.txt via smtp email using bmail. -
Hi Friends,
I am checking our alert.log (windows db) for some errors.
Today's date is Jan 20, 2008. And the database has always been up running.
But the timestamp of the logfile is Jan 17, 2008 and also the
last entry (timestamp) inside it is> Thu Jan 17 03:26:42 2008
Is it possible for the DB to stop logging?
Thanks a lotFirst verify if your database is running and check the disk space where your alert.log file reside on.
-
Applescript to continuously check log file
Today I realized that somebody is trying to hack into my computer via an open screenshare/vnc port. I'm going to work on figuring out how to protect this port, but meanwhile, I wanted to see if there was a way to create a script to continuously check the secure.log file for keywords like "SUCCEEDED" or "FAILED" and notify me when there was a successful or failed screenshare connection. A notification could be an email or, preferably, an SMS.
I've gotten to a point where I have a script that checks the log file and if it finds a "SUCCEEDED" string, it sends me an email. However, I don't know how to most efficiently have it run in the background or check only when there the log file is edited. Here's what I have:
set fileText to read POSIX file "/private/var/log/secure.log" as «class utf8»
if fileText contains "Succeeded" then
tell application "Mail"
set theNewMessage to make new outgoing message with properties {subject:"VNC Connection", content:"SUCCEEDED CONNECTION", visible:true}
tell theNewMessage
make new to recipient with properties {address:"[email protected]"}
send
end tell
end tell
end if
Perhaps there is a way to check the screen share status and alert me when there is a successful connection? I also want to be able to tell when there failed connection as well so that I know that somebody is trying to get in.
Any help would be greatly appreciated.
Thanks.Groz27 wrote:
Thomas, I do have screen sharing turned on and I do have port forwarding set up. I like to have access to my computer when I'm away from home. I was also dumb enough to put a really weak password. Long story short, I was lucky enough to be in the room when somebody took over my computer and started to post CL ads. Looking through my log files, I saw that they've been attempting to hack into my computer for every 5 seconds for the last 10 days at least (as far back as my logs go). I immediately turned off screen sharing, changed my password...
Given your description, the salient issue was the password strength. If it's a weak administrative password, then there are other potential issues, too.
Any password that's in the top five- or ten-thousand most common passwords — or whatever the attack dictionaries are up to now, in terms of content — will eventually get guessed, too.
Usual approach for reducing exposure to these issues is a VPN into the server itself, or — assuming a somewhat more advanced gateway-firewall device, with an embedded VPN server — a VPN into the network, and with secure credentials.
The gateway-firewall VPN server also avoids filling up your local server logs with chatter, unless you intentionally forward the access attempts and errors from the VPN server in the gateway-firewall. -
How to Check Log File for 'Import Standard Purchase Orders' program?
Hi,
When the run the standard program 'Import Standard Purchase Orders' after inserting data to PO interface tables. I am getting the log message as mentioned below.
Start of log messages from FND_FILE
To get the log messages for PDOI, please use the following id to query against FND_LOG_MESSAGES table:
AUDSID = 40499066
End of log messages from FND_FILE
When I go and check for the message in mentioned table against the AUDSID,I couldn't find any error listed.
Even I verified the po_interface_errors table, It returns NO ROWS.
Help me on this issue.
Thanks.Did you checked the imported PO ? follow step 7-8 from MOS note and check
Vision Demo - How To Import Standard Purchase Orders Using the Purchase Document Open Interface PDOI [ID 1054004.1]
You can also check
How To Diagnose Problems With Importing Standard Purchase Orders [ID 781351.1]
thanks -
I have noticed that each time I mount a smbfs share the wireless network fails after a couple of minutes, and has to be reset. The log files seem to be filling up rapidly.
The daemon and sys log contain similar lines.
Jan 2 21:51:34 TOSHIBA-User NetworkManager: <info> Supplicant state changed: 0
Jan 2 21:51:40 TOSHIBA-User NetworkManager: <info> Supplicant state changed: 1
Jan 2 21:53:48 TOSHIBA-User NetworkManager: <info> Supplicant state changed: 0
Jan 2 21:53:54 TOSHIBA-User NetworkManager: <info> Supplicant state changed: 1
Jan 2 21:56:03 TOSHIBA-User NetworkManager: <info> Supplicant state changed: 0
Jan 2 21:56:09 TOSHIBA-User NetworkManager: <info> Supplicant state changed: 1
Jan 2 21:58:10 TOSHIBA-User gdmgreeter[21619]: Gtk-CRITICAL: gtk_tree_view_get_selection: assertion `GTK_IS_TREE_VIEW (tree_view)' failed
Jan 2 21:58:10 TOSHIBA-User gdmgreeter[21619]: Gtk-CRITICAL: gtk_tree_selection_unselect_all: assertion `GTK_IS_TREE_SELECTION (selection)' failed
Jan 2 21:58:10 TOSHIBA-User gdmgreeter[21619]: Gtk-CRITICAL: gtk_tree_selection_select_iter: assertion `GTK_IS_TREE_SELECTION (selection)' failed
Jan 2 21:58:10 TOSHIBA-User gdmgreeter[21619]: Gtk-CRITICAL: gtk_tree_view_scroll_to_cell: assertion `GTK_IS_TREE_VIEW (tree_view)' failed
Jan 2 21:58:17 TOSHIBA-User NetworkManager: <info> Supplicant state changed: 0
Jan 2 21:58:23 TOSHIBA-User NetworkManager: <info> Supplicant state changed: 1
Jan 2 21:58:41 TOSHIBA-User NetworkManager: <info> Updating allowed wireless network lists.
Jan 2 22:00:31 TOSHIBA-User NetworkManager: <info> Supplicant state changed: 0
Jan 2 22:00:37 TOSHIBA-User NetworkManager: <info> Supplicant state changed: 1
Jan 2 22:02:45 TOSHIBA-User NetworkManager: <info> Supplicant state changed: 0
This might have some bearing on anther issue already logged
Any ideas?
malcolliFurther reading and checking log files it appears that this may be two faults.
The NetwokManager and the Gnome Display Manager.
Now to find out more.
malcolli -
Hi all,
We are using Oracle 9.2.0.4 on SUSE Linux 10. In Our statspack report one of the Top timed event is log file sysnc we are getting.We are not using any storage.IS this a bug of 9.2.0.4 or what is the solution of it
STATSPACK report for
DB Name DB Id Instance Inst Num Release Cluster Host
ai 1495142514 ai 1 9.2.0.4.0 NO ai-oracle
Snap Id Snap Time Sessions Curs/Sess Comment
Begin Snap: 241 03-Sep-09 12:17:17 255 63.2
End Snap: 242 03-Sep-09 12:48:50 257 63.4
Elapsed: 31.55 (mins)
Cache Sizes (end)
~~~~~~~~~~~~~~~~~
Buffer Cache: 1,280M Std Block Size: 8K
Shared Pool Size: 160M Log Buffer: 1,024K
Load Profile
~~~~~~~~~~~~ Per Second Per Transaction
Redo size: 7,881.17 8,673.87
Logical reads: 14,016.10 15,425.86
Block changes: 44.55 49.04
Physical reads: 3,421.71 3,765.87
Physical writes: 8.97 9.88
User calls: 254.50 280.10
Parses: 27.08 29.81
Hard parses: 0.46 0.50
Sorts: 8.54 9.40
Logons: 0.12 0.13
Executes: 139.47 153.50
Transactions: 0.91
% Blocks changed per Read: 0.32 Recursive Call %: 42.75
Rollback per transaction %: 13.66 Rows per Sort: 120.84
Instance Efficiency Percentages (Target 100%)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Buffer Nowait %: 100.00 Redo NoWait %: 100.00
Buffer Hit %: 75.59 In-memory Sort %: 99.99
Library Hit %: 99.55 Soft Parse %: 98.31
Execute to Parse %: 80.58 Latch Hit %: 100.00
Parse CPU to Parse Elapsd %: 67.17 % Non-Parse CPU: 99.10
Shared Pool Statistics Begin End
Memory Usage %: 95.32 96.78
% SQL with executions>1: 74.91 74.37
% Memory for SQL w/exec>1: 68.59 69.14
Top 5 Timed Events
~~~~~~~~~~~~~~~~~~ % Total
Event Waits Time (s) Ela Time
log file sync 11,558 10,488 67.52
db file sequential read 611,828 3,214 20.69
control file parallel write 436 541 3.48
buffer busy waits 626 522 3.36
CPU time 395 2.54
^LWait Events for DB: ai Instance: ai Snaps: 241 -242
-> s - second
-> cs - centisecond - 100th of a second
-> ms - millisecond - 1000th of a second
-> us - microsecond - 1000000th of a second
-> ordered by wait time desc, waits desc (idle events last)
Avg
Total Wait wait Waits
Event Waits Timeouts Time (s) (ms) /txn
log file sync 11,558 9,981 10,488 907 6.7
db file sequential read 611,828 0 3,214 5 355.7
control file parallel write 436 0 541 1241 0.3
buffer busy waits 626 518 522 834 0.4
control file sequential read 661 0 159 241 0.4
BFILE read 734 0 110 151 0.4
db file scattered read 595,462 0 81 0 346.2
enqueue 15 5 19 1266 0.0
latch free 109 22 1 8 0.1
db file parallel read 102 0 1 6 0.1
log file parallel write 1,498 1,497 1 0 0.9
BFILE get length 166 0 0 3 0.1
SQL*Net break/reset to clien 199 0 0 1 0.1
SQL*Net more data to client 5,139 0 0 0 3.0
BFILE open 76 0 0 0 0.0
row cache lock 5 0 0 0 0.0
BFILE internal seek 734 0 0 0 0.4
BFILE closure 76 0 0 0 0.0
db file parallel write 173 0 0 0 0.1
direct path read 18 0 0 0 0.0
direct path write 4 0 0 0 0.0
SQL*Net message from client 480,888 0 284,247 591 279.6
virtual circuit status 64 64 1,861 29072 0.0
wakeup time manager 59 59 1,757 29781 0.0Your elapsed time is roughly 2000 seconds (31:55 rounded up) - and your log file sync time is roughly 10,000 - which is 5 seconds per second for the duration. Alternatively your session count is roughly 250 at start and end of snapshot - so if we assume that the number of sessions was steady for the duration, every session has suffered 40 seconds of log file sync in the interval. You've recorded roughly 1,500 transactions in the interval (0.91 per second, of which about 13% were rollbacks) - so your log file sync time has averaged more than 6.5 seconds per commit.
Whichever way you look at it, this suggests that either the log file sync figures are wrong, or you have had a temporary hardware failure. Given that you've had a few buffer busy waits and control file write waits of about 900 m/s each, the hardware failure seems likely.
Check log file parallel write times to see if this helps to confirm the hypothesis. (Unfortunately some platforms don't report liog file parallel wriite times correctly for earlier versions of 9.2 - so this may not help.)
You also have 15 enqueue waits averaging 1.2 seconds - check the enqueue stats section of the report to see which enqueue this was: if it was (e.g. CF - control file) then this also helps to confirm the hardware hypothesis.
It's possible that you had a couple of hardware resets or something of that sort in the interval that stopped your system quite dramatically for a minute or two.
Regards
Jonathan Lewis
http://jonathanlewis.wordpress.com
http://www.jlcomp.demon.co.uk
"Science is more than a body of knowledge; it is a way of thinking"
Carl Sagan -
How to view UCCX log-file after importing outbound contacts?
Some contacts from the list of contacts weren't imported:
«Contacts imported successfully File name rep-30.07.14_2.txt Number of contacts imported successfully:24 Duplicate records exists in the imported file and are discarded. Check the logs for more details.»
How to look at a log file - rep-30.07.14_2.txt?Hi Reena
I only want to know how to check log file. Our customer load csv-files and make many mistakes at files. Whether it is possible to look log to see all mistakes at once? -
Hi all
I've got a error msg when try to generate a report using Cisco history report tool:
Error | An Exceptional Error occurred. Application exiting. Check the log file for error 5022
It only happens when choose report template: ICD_Contact_Service_Queue_Activity_by_CSQ_en_us.
User tried samething on other PC, it working fine.
only on user' own PC and only choose this report, error appears.
user runing windows 7 and do not have crystal report installed
tried reinstalled the software, doesn't work.
also tried this: (https://cisco-support.hosted.jivesoftware.com/thread/2041254) - doesn't work
then tried https://supportforums.cisco.com/docs/DOC-6209 - doesn't work
attached the log file.
thanks.wenqianyu wrote:From the log file:Looks like you get a Login Window.Error message showed up after username/password be enteredThere is an error in the log: Error happened in comparing UCCX version and HRC versionYou may need to do a clean uninstall, download the Historical report from the server, and install it again on the PC.Does this only happen to one PC or to every PC with this application?Wenqian
I have completely uninstalled the HRC, and download from server install again -- still doesn't work with exactly same error.
this matter only happens on this PC, when user try same thing on other PC, it works.
so i think it not relate to server or account. -
Hi All,
I am getting an error message "All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054" when trying to log into HRC (This user has the reporting capabilities) . I checked the log files this is what i found out
The log file stated that there were ongoing connections of HRC with the CCX (I am sure there isn't any active login to HRC)
|| When you tried to login the following error was being displayed because the maximum number of connections were reached for the server . We can see that a total number of 5 connections have been configured . ||
1: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:Current number of connections (5) from historical Clients/Scheduler to 'CRA_DATABASE' database exceeded the maximum number of possible connections (5).Check with your administrator about changing this limit on server (wfengine.properties), however this might impact server performance.
|| Below we can see all 5 connections being used up . ||
2: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:[DB Connections From Clients (count=5)]|[(#1) 'username'='uccxhrc','hostname'='3SK5FS1.ucsfmedicalcenter.org']|[(#2) 'username'='uccxhrc','hostname'='PFS-HHXDGX1.ucsfmedicalcenter.org']|[(#3) 'username'='uccxhrc','hostname'='PFS-HHXDGX1.ucsfmedicalcenter.org']|[(#4) 'username'='uccxhrc','hostname'='PFS-HHXDGX1.ucsfmedicalcenter.org']|[(#5) 'username'='uccxhrc','hostname'='47BMMM1.ucsfmedicalcenter.org']
|| Once the maximum number of connection was reached it threw an error . ||
3: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:Number of max connection to 'CRA_DATABASE' database was reached! Connection could not be established.
4: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:Database connection to 'CRA_DATABASE' failed due to (All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054.)
Current exact UCCX Version 9.0.2.11001-24
Current CUCM Version 8.6.2.23900-10
Business impact Not Critical
Exact error message All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054
What is the OS version of the PC you are running and is it physical machine or virtual machine that is running the HRC client ..
OS Version Windows 7 Home Premium 64 bit and it’s a physical machine.
. The Max DB Connections for Report Client Sessions is set to 5 for each servers (There are two servers). The no of HR Sessions is set to 10.
I wanted to know if there is a way to find the HRC sessions active now and terminate the one or more or all of that sessions from the server end ?We have had this "PRX5" problem with Exchange 2013 since the RTM version. We recently applied CU3, and it did not correct the problem. We have seen this problem on every Exchange 2013 we manage. They are all installations where all roles
are installed on the same Windows server, and in our case, they are all Windows virtual machines using Windows 2012 Hyper-V.
We have tried all the "this fixed it for me" solutions regarding DNS, network cards, host file entries and so forth. None of those "solutions" made any difference whatsoever. The occurrence of the temporary error PRX5 seems totally random.
About 2 out of 20 incoming mail test by Microsoft Connectivity Analyzer fail with this PRX5 error.
Most people don't ever notice the issue because remote mail servers retry the connection later. However, telephone voice mail systems that forward voice message files to email, or other such applications such as your scanner, often don't retry and
simply fail. Our phone system actually disables all further attempts to send voice mail to a particular user if the PRX5 error is returned when the email is sent by the phone system.
Is Microsoft totally oblivious to this problem?
PRX5 is a serious issue that needs an Exchange team resolution, or at least an acknowledgement that the problem actually does exist and has negative consequences for proper mail flow.
JSB -
Check Event Alert failed with error - No errors in the log file.
Hi All,
I am developing a simple event based alert on PO_HEADERS table. I want to send alerts when a PO is created.
I did all the steps according to the metalink note How To Send An Email In A Simple Periodic Or Event Alert? [ID 1162153.1]
When i create the PO, the alert is triggering, and Check Event Alert concurrent program is running. But the program completes with error.
Checking the output file (empty) log file (no errors)
What can i do here to find out what is the problem? There is nothing in the Alert Manager - History form also. I have kept 7 days as days to keep.
Thanks!
MCan you find any details about the error from the "View Detail" button (the same window where you check the log and output files)?
I found the Workflow logs, I am not sure what I am looking for, but i am not seeing any errors reported.The event viewer is supposed to send an email, so do you see anything in the logs that could be related?
Thanks,
Hussein -
MacPro suddenly losing power - what log file(s) can I check?
I've been having a strange problem over the last several months where my MacPro will suddenly turn itself off. It's exactly like a power failure, but only the computer is affected (monitor, other devices all fine).
I bought a UPS thinking that it was a line problem, but the machine still turns itself off once in a while, anywhere from once or twice a month to three times a week.
I suspect it's being caused by something connected to the computer, but there's not too much there - a USB hub, printer, iPhone, a couple of iPods, and a gaming headset.
What log files on the Mac can I check for possible causes to this problem? I tried looking through the Console Messages app for log errors, but there's so much there I was overwhelmed by data.
Can anyone suggest a specific log or two to inspect, or any troubleshooting techniques that may identify the problem? Anyone ever have a similar problem?
Thanks!
-JoeThis isn’t too helpful, but I’ve been having exactly the same problem over the last couple of weeks. It doesn’t seem to be power line (printer and other stuff on the same line don’t go down). Oddly, it turns itself off and then reboots (though I do NOT have reboot after power failure checked).
Two things I’m presently focusing on are (a) the fact that, at least the last few days when I’ve been logging the problem, it ALWAYS does this about 8:15 a.m. Doesn’t matter whether I’m at the computer using it or not. (b) Always, always, always when it’s happened I’ve had Microsoft Word open. But I almost always have Word open, though I’m going to make sure that I don’t have it open at 8:15 tomorrow morning.
Reset PRAM, checked the disk with AlSoft’s Disk Warrior, and downloaded and am currenty running Symantec’s AntiVirus. Can’t think of any likely viruses that would do this, but it seems worthwhile to me to check. I’m going to check fonts for badness of some one or more, and I’m this moment downloading an update to Microsoft Office that is supposed to make it more stable. But an application shouldn’t be able to force a power-down and reboot.
I’m going to the Apple store tomorrow to ask for advice there. My one post here hasn’t gotten any suggestions.
It’s not an obvious kernel panic (i.e., not the usual kernel panic message). Just a little power click, black screen, and a few seconds later a reboot.
-Lofty
Maybe you are looking for
-
I get this message: "Client host rejected: cannot find your reverse hostname. [17.110.78.42]". The recipient domain is ptd.net and this is coming from an iCloud account. PTD refused to help. Is this an Apple problem? When can this be fixed? I have an
-
OK, strange one here. I have several clients (Lion and Mountain Lion) that get the Missing Plug-ins in certain emails using Mail.app. They are all using Exchange 2010 server, some setup w/ IMAP, others as Exchange server. I know about the java tri
-
Add Additional IP Addresses to WAN Interface on SRP527W
Hi, Can anyone tell me how to add an additional IP addresses to the WAN interface on a SRP527W. We are connecting to an ISP which assigns us a static IP address with our ADSL account. We also have another 2 additional WAN IP addresses that we have pu
-
Keynote and Microsoft Wireless Presenter Mouse 8000
Hey folks, i seached on this in the forum, but actually did not find any hints about my problem. So I switched from PowerPoint to Keynote some weeks ago and got to do my first big presentation with Keynote in some days. I am amazed by the possibiliti
-
Hi all Do any one give me the code to make the object in the tree node as link to navigate to another page, Note:Onmouseover alone the object gets the link and I need to get the hand symbol reg balaji