Interview related Question to Reports

Hi Friends,
I am pleased with the respone John got for Forms. So i decided to share the questions i faced in the interviews in reports 6i.
Q. Order in which reports trigger executed?
A.
1.Before Report
2.Before Parameter Form
3.After Parameter Form
4.Between Pages
5.After Report
I will try to post as many QA possible in due course
null

If you were to base your hiring on these
type of questions, that is stupid.
Anyone who is worth his 2 cents in programming,
that does not know the answer, would
go into each unit, and srw.message ( 0, 'Before' ); each unit, and figure
it out themselves.
I still strongly feel that certification
produces alot of paper idiots ( no offense
to such people ).
You want someone that can produce a
query and a layout, and have a general
idea of a frame.
Brian Oracle Reports Expert
No certification
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by [email protected]:
Hi Friends,
I am pleased with the respone John got for Forms. So i decided to share the questions i faced in the interviews in reports 6i.
Q. Order in which reports trigger executed?
A.
1.Before Report
2.Before Parameter Form
3.After Parameter Form
4.Between Pages
5.After Report
I will try to post as many QA possible in due course<HR></BLOCKQUOTE>
null

Similar Messages

Interview questions in reporting

hi all,
i m preparing for interview, and was trying to fathom all possible troubleshooting questions on reporting..
Can someone pls send me a list of the most frequently occuring errors in reporting (at <removed>)
All possible help is thankfully acknowledged and appreciated,
regards,
shalini.
Message was edited by: shalini gupta

Hi,
Shalini if you are preparing for interview, first thing I suggest you is to get familiar with what is available about reporting in help.sap.com.
I am sending you some part related to reporting. But to know about the related errors we need to have some requirement, which is beyond scope right now. Anyway I wish you ALL THE BEST.
Check your mail, I hope it will help you to some extent.

Questions regarding Reporting

Hi gurus,
Will any body plz forward me questions on Reporting i.e. in real time scenario and subject oriented pattern. It will be very helpful for me.
Thanks in advance,
Shammu.

Hi Sameer,
Please check ou this thresd
SAP BW Interview Question !
Regards,
Sridhar

PM/EAM related questions posted in PLM forum

Hi,
I was going through some of the threads available in PLM forum, but to my surprise, most of the threads posted are related to PM, which should have been posted in EAM forum. It was clearly mentioned by the moderator in one of the sticky thread [PLM-Forumsplit - Please ensure you are using the right forum|PLM-Forumsplit - Please ensure you are using the right forum;
Questions regarding Plant Maintenance (PM) or Customer Service (CS) are discussed in the Enterprise Asset Management (EAM) forum
forums - posts will be moved to the right forum.
Please ensure your are opening a new thread in the right forum
Despite the clear instructions given my the moderator, PM related questions are still posted to PLM forum and some of the active participant of EAM forum answers these questions in PLM forum. It would be nice if those threads are moved to appropriate forum, so that the relevant informations are available under one forum, also, PLM forum should be monitored regularly and inappropriate threads are to be moved to their respective forum.
Few PM related threads posted recently in PLM forum:
[Change PR for External order|Change PR for External order;
[BAPI or Function Module to Complete Maintenance calls in IP10|BAPI or Function Module to Complete Maintenance calls in IP10;
[delete material from PM order|delete material from PM order;
[Message no. IW056 Work center change --> default data redefined|Message no. IW056 Work center change --> default data redefined;
[Component in Task list not reflecting in maintenance order|Component in Task list not reflecting in maintenance order;
[Deleted functional location/equipments|Deleted functional location/equipments;
[PM orders not listing components from material BOM|PM orders not listing components from material BOM;
[Completion date in Maintenance Plans in IP10|Completion date in Maintenance Plans in IP10;
I had used abuse reports for some, but numbers of such posts are many.

I hate to say this, but I often see the same thing, and I've never been able to figure out exactly what triggers selectability vs. non-selectability, but I suspect some of it has to do with tranparency flattening in particular, and possibly text wrap in cases where that comes into play. ID optimizes the PDF it creates, I think, and that might cause text, or even images, to be broken into chunks in funny ways. It occurs to me that turning off optimzing for fast web view might help in this regard.

Re:I am fresher can any body giveme Interview point Questions

Dear Friends,
I am fresher can any body giveme Interview point Questions.
emailid:[email protected]
Thanks in advance,
KIRAN.

http://www.sap-img.com/sap-fi.htm
FICO Sample Questions
FI/CO Interview Questions
SAF FI Technical Interview Questions 1
SAF FI Technical Interview Questions 2
SAP FI/CO Sample Questions and Answers 1
SAP FI/CO Sample Questions and Answers 2
FI Errors and Probable Solutions
SAP Financial Modules TC
Some Important Tcodes for FI GL AR AP Asset
SAP FI Transaction Code List 1
SAP FI Transaction Code List 2
Tcodes for Configuring Assets Accounting
Useful Reports Tcode in SAP Financial Accounting
The Financial Statement Closing Tcodes
Profit and Loss Closing Tcodes
Assets and Liabilities Closing Tcodes
SAP FI CO Table
Important Tables in SAP FI
Important Tables in SAP CO
Important Tables in SAP AA
Regards,
Rajesh Banka

Few questions on Report programming

Hi guys,
I have few questions on report programming.
1. What is the purpose of the statement REPORT zxxx. Even if i gave a name other than my report name i don't find any difference in syntax check/Functionality.
2. What is the purpose of list headings in report program? This option will come along with the text elements and selection texts.
3. What is the purpose of logical data base. Even if it is efficient why don't we use it frequently in our reports? Is there any limitations?
All usefull answers will be rewarded as usuall:-)
Thanks,
Vinod.

1. As u told that you dint get any syntax errors even after changing the Report Name,there are chances of getting Runtime errors.
2. The usage of List Headings is when you create a list in a program, you can also create your own list and column headings.
Refer this link for further info.
http://help.sap.com/saphelp_nw70/helpdata/en/e3/960a05eb0711d194d100a0c94260a5/content.htm
3. The Limitation of LDB is the usage of GET statements which act similar to SELECT - ENDSELECT And also if you dont choose the proper LDB,a single LDB may contain data retrieval from so many tables ,that it would make the entire process very slow and it is very hard to find LDBs for other modules than HR.
Only in HR module the data is organized in such a way thatusing LDBs would be much simpler.
Reward points if useful.

I want to check all functions of PCI 6534.I have read the user manual..I have some memory related questions.Please help me for that.

I want to check all functions of PCI 6534.I have read the user manual..I have some memory related questions.Please help me for that.
1.)If i am using the continuous output mode.and the size of generated data is less than 32 MB.If i want to preload the memory,what should i do?I want that first of all i load all my data to onboard memory & then i want to make start the transfer between 6534 & peripheral.Is it possible?As per me it should be.Plz tell me how should i do this?I think that in normal procedure the transfer between 6534-peripheral & outputting data from pc buffer to onboard memory works parallely.But i don't want this.Is it poss
ible?
(2).Similarly in finite input operation(pattern I/O) is it possible to preload the memory and then i read it?Because i think that the PC memory will be loaded automatically when 6534 acquires the data and then when we use DIO read vi the pc buffer data will be transferred to application buffer.If this is true,i do not want this.Is it possible?
(3) One more question is there if i am using normal operation onboard memory will be used bydefault right?Now if i want to use DMA and if i have data of 512 bytes to acquire.How will it work and how should i do it?Please tell me the sequence of operations.As per my knowledge in normal DMA operation we have 32 Bytes FIFO is there so after acquisition of 32 bytes only i can read it.How it will known to me that 32 bytes acquisition is complete?Next,If i want to acquire each byte separately using DMA interrupts what should i do?Provide me the name of sourse from which i can get details about onboard memory & DMA process of 6534 specifically
(4).In 6534 pattern Input mode,if i want to but only 10 bits of data.and i don't want to waste any data line what should i do?

Hi Vishal,
I'll try to answer your questions as best I can.
1) It is definitely possible to preload data to the 32MB memory (per group) and start the acquisition after you have preloaded the memory. There are example programs on ni.com/support under Example Code for pattern generation and the 6534 that demonstrate which functions to use for this. Also, if your PC memory buffer is less than 32MB, it will automatically be loaded to the card. If you are in continuous mode however, you can choose to loop using the on-board memory or you can constantly be reading the PC memory buffer as you update it with your application environment.
2) Yes, your data will automatically be loaded into the card's onboard memory. It will however be transferred as quickly as possible to the DMA FIFO on the card and then transferred to the PC memory buffer through DMA. It is not going to wait until the whole onboard memory is filled before it transfers. It will transfer throughout the acquisition process.
3) Vishal, searching the example programs will give you many of the details of programming this type of application. I don't know you application software so I can't give you the exact functions but it is easiest to look at the examples on the net (or the shipping examples with your software). Now if you are acquiring 512 bytes of data, you will start to fill your onboard memory and at the same time, data will be sent to the DMA FIFO. When the FIFO is ready to send data to the PC memory buffer, it will (the exact algorithm is dependent on many things regarding how large the DMA packet is etc.).
4) If I understand you correctly, you want to know if you waste the other 6 bits if you only need to acquire on 10 lines. The answer to this is Yes. Although you are only acquiring 10 bits, it is acquired as a complete word (16bits) and packed and sent using DMA. You application software (NI-DAQ driver) will filter out the last 6 bits of non-data.
Hope that answers your questions. Once again, the example code on the NI site is a great place to start this type of project. Have a good day.
Ron

Consumer/customer relations payment load report

is there any standard report for Consumer/customer relations payment load report.....for country specific

Hi Rajan,
There is a lot of scope for performance tuning the code:
1. Read statement should be with BINARY SEARCH
2. Select statement should have FIELDS in the same order as they exist in the table
3. Select statement where clause should have fields in same order as they exist in the table.
4. Internal tables seem to be having a huge number of fields. If possible, please limit the fields to only required fields in the internal table.
Best regards,
Prashant

In which Board we need to post cRIO related Questions?

sir,
In which board do i need to post cRIO related Questions and doubts regarding my application with cRIO .Please help me previously i have posted in motion control drives as my application is related to motor control using cRIO.bu i am not getting any reply .i couldnt find any cRIO related board in select board option.
Solved!
Go to Solution.

Hi illa,
You can post your query under the Real Time Measurement and Control
http://forums.ni.com/t5/Real-Time-Measurement-and/bd-p/280

SQL ENTERPRISE: The edition of Reporting Services that you are using requires that you use local SQL Server relational databases for report data sources and the report server database

The error below makes absolutely no sense! I'm using Enterprise Core...yet I'm being told I can't use remote data sources:
w3wp!library!8!03/05/2015-19:08:48:: i INFO: Catalog SQL Server Edition = EnterpriseCore
w3wp!library!8!03/05/2015-19:08:48:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedException: , Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedException: The feature: "The edition of Reporting
Services that you are using requires that you use local SQL Server relational databases for report data sources and the report server database." is not supported in this edition of Reporting Services.;
Really? This totally contradicts the documentation found here:
https://msdn.microsoft.com/en-us/library/ms157285(v=sql.110).aspx
That article says remote connections are completely supported.
ARGH! Why does this have to be so difficult to setup?!?

Hi jeffoliver1000,
According to your description, you are using Enterprise Core edition and you are prompted that you can’t use remote data sources.
In your scenario, we neither ignore your point nor be doubt with what you say. But actually we have met the case before that even though the SQL Server engine is Enterprise but the reporting services is still standard. So I would recommend you to find the
actual edition of reporting services you are using. You can find Reporting Services starting SKU in the Reporting Service logs ( default location: C:\Program Files\Microsoft SQL Server\<instance name>\Reporting Services\LogFiles). For more information,
please refer to the similar thread below:
https://social.technet.microsoft.com/Forums/en-US/f98c2f3e-1a30-4993-ab41-acbc5014f92e/data-driven-subscription-button-not-displayed?forum=sqlreportingservices
By the way, have you installed the other SQL Server edition before?
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Two related questions: ColdFusion 10/Java applications and J2EE supported servers

I have two related questions:
1. CF10 and integration with Java Web applications
We have a couple of Java applications running on JRun and interfacing with CF9 applications. The JRun clusters were created through the JRun Admin and, apart from lack of Axis 2.0 support, have served us well for years now. And, as would be the case, the ColdFusion9/Java/Flash application is a critical public-facing application that the business uses for bidding on projects.
It appears that with ColdFusion 10 on Tomcat, we will not be able to run those Java applications on a Tomcat-CF10 JVM cluster. Is this correct? IF so, what are our options?
2. J2EE Application Servers supported by Adobe for CF10
Which of these is correct?
A. This URL (http://www.adobe.com/products/coldfusion-enterprise/faq.html) states "ColdFusion 10 supports IBM® WebSphere, Oracle® WebLogic, Adobe JRun, Apache Tomcat, and JBoss."
B. This URL (http://wwwimages.adobe.com/www.adobe.com/content/dam/Adobe/en/products/coldfusion/pdfs/cf1 0/coldfusion10-support-matrix.pdf) states:
"J2EE application servers: WebLogic Server 10.3, 11.1, WebSphere Application Server 7, ND 7 JBoss 5.1, 6.0, 7.1.0"
I *think* "A" above is wrong re. support for Adobe JRun. It does not specify a version of Apache Tomcat unless it is simply referring to the custom version the comes with CF10.
Option "B" above shows no support of Adobe JRun or 'standard' Apache Tomcat.
Thanks,
Scott

Question 1 above was answered: "No support for Java web applications under CF10's custom version of Tomcat"
Question 2: No answer yet: Is Apache Tomcat (NOT Adobe's customized version) supported for CF10 J2EE deployment? I do not see any installation instructions on how to install CF10 on Apache Tomcat 6 or 7.
Is anybody using Apache Tomcat as their J2EE app servers and, again, NOT Adobe's customized/limited version?
Thanks,
Scott

Relative Selections in reports

Hi everybody,
we want to use relative selections in reports e.g. to select the current quarter and the next three.
The standard relative selection doesn't contain this option, but it is possible to define own relative selections. But these are only "quite relative", that means there is no logic to calculate the current quarter and the following from today's date. I can only enter fixed values e.g. Q3/2014 for the current quarter and have to change it when the next quarter starts. This is also described in the documentation. That's not really what we are looking for.
Is there any PDI-way to create own relative selections with really calculations? I didn't find anything.
kind regards,
Frank

Frank,
I don't believe so as of 1405 - I've asked support about this and they recommend that i post an idea to the ideas forum.
We'll have to see what the 1408 SDK information contains, but from what i see, there's nothing in the 1408 ByDesign "What's New" documentation related to this.

Question about reports layout

Hi ,
I have a quick question about report Layout.
I have created a report in 6i. Now if I want to change my
select statement and add new table to select from , it just
restructures my report layout again and set that to Default One.
Is there any way where I can set my Own layout as Default for
that particular Report ?
I would really appreciate any feedback.
Thanks
Vidya

Try to give it alias names to the columns . Then when you
change the table your are selecting from . The layout should
not change.

Deafult search engine on a new tab-this thread was closed but I have a related question. Once you put the new url in, what then? Close? When tried, did not work

"deafult search engine on a new tab" - this thread was closed but I have a related question. [the word “default” is spelled as it on the thread] Once you put the new url in, what then? Close it? When tried, it did not work. The closest answer is noted here. Instructing to go to about:fig. Specifically, I installed the accuweather add=on and it took over my tab home page - the one that comes up when you click for a new tab. I didn't like it so I clicked the button to remove it and the page went blank. I searched to see out to restore the tab page, tired the reply at this page :
http://support.mozilla.org/en-US/questions/753256?s=install+search+box+on+new+tabs&r=3&as=s
But it did not work. Can some on help me? Just want to know how to make google or some page open on a new tab.
Many thanks

Thanks so much for your support. As I said I am not a professional, so I by chance saw a friend who is and this is what he suggested and it worked.
We googled for an answer and found this site: http://www.guidingtech.com/8004/have-new-tab-page-open-specific-website-firefox-chrome/
It says to Download and install Download and install''' NewTabURL''' and gives instructions on how to. Now when I open the tab it goes to my preferred search page!

Please post documentation-related questions or comments on the

Please post documentation-related questions or comments on the Performance Management Applications {forum:id=1318} forum
http://forums.oracle.com/forums/forum.jspa?forumID=1318

I just got a call today that I reached my 300GB limit for the month. I called and got a pretty rude response from the security and data usage department. The guy told me in so many words that if I do not like or agree with the policy that I should feel free to find another service provider.!!! I tried to explain that we watch Netflix and XFinity on-demand alot and I was told that that can not be anywhere close to the data usage. I checked my router and watching a "super HD, dolby 5.1" TV show on Netflix will average about 5-6 GB per hour (1.6MB/s) ... sp this means that I can only watch no more than 1-2 Super HD TV shows a day via Netflix before I run out of my data usage. This seems a bit redicilous doesn't it? Maybe the TV ads about the higher speed than the competition should be accompanied with "as long as you don't use it too often" Not a good experience ...

Interview related Question to Reports

Similar Messages

Maybe you are looking for