Intial stock update

hi gurus,
i have a queston?,i need to update stock of a particular material,plant,and storage location,
is there any way i can maintain the stock thro some direct table entries?
if there is any?pls send me the table name,from where i can update my stocks rather than t-code MB1C
here i have aproblem while doing MB1C in that storage location is place automatically filled by XXXX and showing an error storage location not maintained,byt we have maintained the customising properly. so unable enter my storage location,due to that i'm unable to update my stock.
so pleae give us some suggestions what we can do regading this.
with regards
vijay

Dear Vijay
No Table entries needed and moreover, it is not advicable.  Try with mi10.  It should fulfill your requirement.
thanks
G. Lakshmipathi

Similar Messages

  • GR BEFORE INTIAL STOCK UPDATE

    HI sap guru's
    in my client want GO LIVE ,but we have 300 pending GR ,can i do GR before stock updated(all ready available stok in client)
    HAVE ANY AFFECT IN FINANCE

    Hi Pooja,
    When you enter the Gr before the initial stock, there will enteries debit/credit in few accounts like GR/IR, Vendor account...right...and that also with the posting date...
    On the other hand if you make your GR, if the stock is improper in qty, QI reference then wht will you do???
    If the qty you entered in the system doesnot match with the initial stock then there will mess created in the system...then you may need to create few more docs to cancel it....
    Thirdly, if you show the GR...then abt the qty which goes for production..from where you'll issue..???
    Hope it makes clear...
    Regards
    Priyanka.P
    AWARD IF HELPFULL

  • Open stock updation not performed with MB1C

    Dear Frieds,
    While performing open stock updation with MB1C T-Code, an error message will appeared as " Material xxxx does not exist in warehouse xxxx". Kindly give the solution.
    Regards,
    Gopi

    Hi,
    Go to MM01, select warehouse - 1 & 2 views, specify the warehouse nos & extend the warehouse views for this material. Once the above is done, you can proceed to use MB1C.
    Regards,
    Vivek

  • POS DM: Stock updates in SAP Retail

    Hi!
    We are implementing SAP Retail (ERP 6.0 EHP4 stack 3), SAP PI (Netweaver PI 7.1 SP 8) and SAP BW (NetWeaver 7.0 ehp1 stack 4, incl BI content 704, SP 3 ) for a client. Their POS system is a 3rd party system, i.e. not SAP POS, and it does not contain any stock information.
    This issue concerns stock updates in SAP Retail using POS DM:
    On the busiest day of year, my client has 347 000 POS transactions in total from all stores, and in one year they have 30 mill POS transactions. My client requires that SAP will provide them with near-realtime information on stock availability, as this is an important way of providing good customer service. The stock information should be available in SAP Enterprise Portal and SAP Retail Store, as well as standard SAP gui transaction. In addition, the webshop (external system) should have as accurate information about stock as possible, at least it should be updated once every 30 minutes.
    My client also has a requirement to be able to create purchase orders during office hours (store opening hours), based on MRP runs. This means they must have as accurate stock levels as possible for running MRP. Stock levels are also used in ATP checks, when deciding whether to pick customer orders from store inventory/stock or to create purchase requisitions.
    All these requirements have led us to believe that the best way to solve this, is alternative A:
    - to update stock continuously during office hours, using WPUBON to create material documents, one for each POS transaction. Sales and tenders will be updated in SAP Retail using WPUUMS and WPUTAB.
    Some challenges this will create:
    a)     It will create 347 000 WPUBONs on the busiest day of year, all within 10-12 open hours.
    b)     If we have same amount of material docs and FI docs, they will use 30% of the available 8 digits within their number ranges per year.
    c)     The idocs will fail if there are article locks simultaneously. (However, this can be handled by updating products only at night time (using batch jobs) and using batch job to handle failed idocs)
    Edited by: Øystein Emhjellen on Jan 4, 2010 2:15 PM

    Alternative B:
    - we have considered to use WPUUMS and WPUTAB, updating stock levels only once a day. The solution we then must use for taking into account actual sales data is described in SAP Note 1088886 - Using the interface for online stock queries. If we choose this, we need to check during the day for each article any sales, to reduce stock in reporting/screens, ATP checks and in MRP runs. We must also create a program to check for articles sold before sending stock data to webshop (external system). (As we do not know which articles have been sold, we must create our own version of RFC - /POSDW/SALES_QUERY_RFC, to enable that the article number does not have to be specified. Rather, the article numbers (and sold quantities) have to be returned to ERP based on what was actually sold.)
    We consider this alternative more risky, due to the need for changing behaviour of standard programs for MRP and ATP check. It will also create a number of RFC calls between SAP ECC and SAP BW.
    My questions on this issue are:
    i)     Will alternative A be preferrable, if hardware requirements are handled?
    ii)     Do you see any additional challenges related to alternative A?
    iii)     Will alternative B be adviceable, concerning the program changes/enhancements involved?
    iv)     Are there standard implementations of SAP ECC, that includes the use of RFC - /POSDW/SALES_QUERY_RFC. I.e. standard programs in SAP ECC that uses the information from this RFC call?
    Thanks for any advice !
    Best regards,
    Oeystein Emhjellen

  • SAP WM-Intial Stock Entry

    Hi
    How to make Intial Stock entry in WM bin .Pls explain the process flow in details . IS that process of making initial stock entry in IM through Movement type 561 is first process.

    Hi Kumar,
    Please Follow the link using the t code
    Create initial stock entry using MB1B Or MIGO
    The movement type 561
    Goto disply mode using the t code MIGO or MB03
    Click on WM view and note it the Transfer requirement number
    GO to the LT06 with reference of transfer requirement or else meterial document
    where the material has to be placed. Hope this will help you

  • 3rd Party with stock update

    Hi all,
    I am trying to setup proces to track SO through process of purchase.
    Much like 3rd party sales processing w. shipping notification with difference that I need to receive goods on stock not on SO consumption and afterwards to ship it away.
    I tried to set up automatic Pur.Request out of Sales Order but was unable to do this without account assignment, and thus always ending up creating PO for consumption and skiping stock.
    Can somebody give me some pointers on how should I setup this.

    Yes, I am aware that in 3rd party scenario there is no stock update cos goods are shipped directly to customer from vendor.
    Mine problem is that I have to make process of tracking SO through Purchasing with stock update and I am stuck with creating Pur.Requisition out of SO with account assignment which then triggering GR on SO consumption.
    Is there a way to create Pur.Requisition automaticaly out of SO without account assignment. So that I can procure to stock and still have update document flow in SO.
    Or maybe this is wrong approach and I should take another one.

  • Last stock update Date Tab not updating in ICH

    Hi Team
    I observed that in ICH screen Last stock update Tab is not going to update every time while demand and stock information coming from ECC to ICH.
    There is no stock inconsistency. All stock tab information are updating correctly in ICH compare to ECC system.
    Only this Last stock update tab Date are not updating.
    What is the reason behind this?
    Could you please help me to resolve this?
    Regards
    Virendra Kumar
    09769396038

    Hi Virendra
    It is a bug, please report to SAP and get fix
    which version you are using and what is the patch level?
    1341691 should be helpful check out
    Best Regards
    Vinod

  • MB1C   Intial Stock posting error

    Hi Gurus,
    When i am doing MB1C intial stock posting i got a error  " G/L Account 39999 does not exist in Company Code 9999"....
    Give me suggestion...
    Thanks in Advance
    Ravikumar Talluri

    hi  Ravi
    The error occurs because of not maintaining the  GL account
    u can maintain the gl account for that company code in the tcode <b>fs00</b>
    goto that t code and give the gl account that u occured during the posting of the stock and enter the company and try to save
    Now goto the MB!C and maintain the stock and now u will not get that error
    reward points if useful

  • No weather or stocks update

    Hello. I have two iPhones that I purchased at the same time. Because of crashing apps issues last week, I completed a complete reset of both phones back to the original state. Then I installed minimal apps, and installed 2.02 today. Both phones show wi-fi. If I shut off wi-fi, EDGE picks up weather and stock updates. Otherwise only one phone works on wifi?

    iPad is carried much higher then the iPhone (like a waist pocket, unlike the iPad which is in your hands mostly) ... after a certain altitude, there is no real need for "weather" ... where, your iPhone is on your waist - a place where some weather changes could be useful to know about...

  • Trouble with opening a 2nd page of Safari and getting Wx or Stock updates?

    My ipod touch says it is connected to internet through my home wifi router and all the items under Settings>wifi seem correct. My windows laptop works correctly on the same router. But when I open Safari on the Touch, the first page of the web site opens but I can not then get beyond that page. That is, if I click on a topic in Yahoo for example, I get the message "Safari can not open page, not connected to the internet". Similarly, I can not get my weather updated or the Stocks updated. I get the message "Update Failed". My Touch works on other networks. Any suggestions?
    Thanks

    I don't recommend using Safari to check your connection. You have some other tools that will let you know what the problem is.
    Tap Settings > WiFi > and then tap the blue > next to your network name. When your touch is connected to your network and your router has issued an IP address, you will see an IP address for the device, a subnet mask address, a router address, and a DNS address or two.
    Most likely you are going to see a device IP of 169.x.x.x, and incomplete subnet mask address and nothing else.
    The most common things to cause this are:
    1. WEP encryption
    2. Old router firmware
    3. You need to reboot your router
    All are fixable. See this article for general troubleshooting help with WiFi: http://support.apple.com/kb/TS1398

  • Problem in intial stock posting

    Hi friends!
                        when am i doing the intial stock posting for material through mbic and 561 movement type system give the below message
    Account determination for entry CAIN GBB ____ BSA 3000 not possible.
    at the same time i checked in account assignment.for CAIN GBB-BSA3000 was assigned.
    how can i overcome this problem.plz help me
    Thanks
    venkat

    Dear,
    the meaning of CAIN GBB ____ BSA 3000
    CAIN - is chart of account
    GBB - transaction
    _____ is space = valuation modifier
    BSA - account modifier
    3000 - valuation class
    Check the entry is there for GL a/c in OBYC
    In which plant you are doing his transaction and what is the valuation area?
    Is valuation are is company code or plant?
    Edited by: Rajesha Vittal on Mar 11, 2008 6:45 PM

  • Material return(sales return)-default stock updation

    Daer Gurus
    While material return(sales return), default stock updation is possible through Transfer posting or some other transcation...pls help me to give a Soln
    Regards
    Ragesh

    If a customer returns goods , you must first determine whether or not a returns delivery exists for the returns in the Sales (SD-SLS) component. You then enter the return with or without a returns delivery.
    Since returns from the customer are usually examined, the quantity returned is first posted to blocked stock returns. As is the case with goods receipt blocked stock, blocked stock returns are neither valuated nor do they count as unrestricted-use stock.
    If an examination proves that the returned quantity should be taken over into unrestricted-use stock, you enter the transfer to unrestricted-use stock in a second step. It is at that time that the valuation of the goods receipt occurs.
    If a returns delivery exists, the return should be posted in the Sales (SD-SLS) component, not in the Inventory Management component.
    Depending on how Customizing for Sales is configured (the movement type is configured in the step Define Schedule Line Category), the delivery is posted to the following stock:
    Blocked stock returns (non-valuated, not unrestricted-use) (movement type 651)
    Unrestricted-use stock (movement type 653)
    Quality inspection stock (movement type 655)
    Blocked stock (movement type 657)
    If the given quantity is posted to blocked stock returns first, you can make a manual goods movement posting in the Inventory Management component to transfer the quantity to valuated stock.
    If blocked stock returns are to be transferred into your company's own stock, you enter the transfer as a transfer posting. Choose movement type 453 (to unrestricted-use stock), 457 (to stock in quality inspection stock), or 459 (to blocked stock.
    If helps rewards points.
    Regards
    TAJUDDIN

  • Intial stock posting

    Hi All,
    While posting intial stock i am getting the following error
    There is no item category assigned to account 790005/INT
    regards
    ram

    Hello
    I think this is related with FI Module. Please get in touch with your FI/CO consultant for the same.
    Mean while  I think this is a document splitting error. You can  try this.  Go to SPRO Financial Accounting(New)>General Ledger Accounting (New)>Document Splitting>Classify G/L
    Accounts for Document Splitting and add your GL and assign the correct item
    category(as per the nature of GL) to it.
    Regards
    Prashant Ranalkar

  • Stock Update in portal

    Hi All ,
    I want to show the latest stock rates of my company into my portal.
    plz do let me know ho can i do that .
    Thanking You
    Krishan Kumar Yadav

    No Dear
    My Company do not broadcast the RSS Feeds abt the stock .
    I know how to user RSS feeds but i want it from other sources
    Is there any way that i can get the stock updates of my company from some other sources .
    thanks for your support
    Message was edited by:
            krishan Yadav

  • Stock updated for specific plant.

    Hi
    I want the stock report for specific plant where I can see the stock updated date rather than posting date.
    Thanks,
    Kiran

    Hi Yogesh,
    You are right. I want the last date when the inventory of material changed
    For example
    Material Code        |  Plant  |  Last date of inventory changed.
    Thanks,
    Kiran

Maybe you are looking for