Intial upload of Stock in Transit Material with in plant / Inter company

Hi Friends,
How can we do Intial upload of Stock in Transit Material with in plant / Inter company.
In this case accounting entries has already completed while doing post goods issue (thru SD route) or in 1st step 301 mov. type.
Now the material is in transit. While we go to new system how can do this without hit of aacounting entries.
I tried 565, it Intial upload of stock to Blocked, so accounting entries took place.
Regards
Sai Krishna

Hi,
What I am proposing is:
At this juncture both plants accounting has been done in legacy.
Coming to new system whatever stock we upload that much value only updated in receiving plant. In reality there is difference between legacy & new system in this case. In legacy stock in transit value also added in receiving plant (since we did PGI). If we do stock upload with 565 mov. type .. intial entry to blocked stock i.e value of inventory is matching the legacy.
Actual receiveal of material do transfer posting from blocked stock to unresticted stock.
What is your opinion.
We won't upload the G/L inventory, it will come thru stock upload for kishore infor.
Regards
Sai Krishna

Similar Messages

How to get the stock of STO Report with suppling Plant/receiving Plant/open

How to get the stock of STO Report with suppling Plant/receiving Plant/open/close qty.

MB5T gives you Details of STO which have stok in transit.
ME2W gives you supplying plant wise STO details. Also in ME2W , in the ALV report output, if you select the "delivery Schedule line" icon , you will get details such as , STO qty, Issued qty , undelivered qty etc.

To maintain material with the plant

hi to all,
i hv create a configural material, but when im going to create a BOM for the material i face error, "material not maintained in plant". i want to know how i maintain this configural material with the plant to create BOM?

Hi
It seems you have created the material without giving any plant number
you need to go again T code MM01 give the material number select the required views and give the plant number and storage location then system will extend tis material to the respective plant
then you go ahead with BOM etc..
Regards
Abu Fathima

Stock in transit report with delivery # and date included

I need a report similar to MB5T that will also show the delivery number and goods issue date. I couldn't find anything standard and was going to ask an ABAPer to create something. When researching where stock in transit is stored, I keep finding that the value should be in MARC-TRAME; however, in our system that value is blank (even for a material that shows stock in transit in MB5T.) Is this value stored in another location as well?
Thanks in advance for your help.

Thanks for the response. I know that I can view the PO history by going into the individual POs, but we want something that will show all of the POs at once without having to click in each individual one.
Thanks!

Initial Uploading of Stock in Transit

Hi all
We are going Live by next week. But there are some materials which has been already dispatched and the stock are in Transit. But the Material will reach the Receiving plant after Go-Live only.
How to accomodate the Stock in Transit when doing Initial upalod.
Kindly suggest.
Regards
Madhesh Kumar

Hi,
Alternative is to re-enter purchase orders but treat them as a normal external vendor process rather than inter-company. To do this you would need to create the external vendors (exactly same as inter-company ones) but the STO config will be based on inter-company vendor number.
This way you don't need to worry about creating outbound deliveries etc.
Thanks.

-ve valuated stock value of material with zero stock value

Hi,
I am new to this forum.
right now i am facing a severe problem in SAP.
That is,
we have a material in SAP which shows -ve Valuated Stock Value of material but its valuated stock quantity is zero in TC MC.9
while in MB5B both Stock and Value are Zero.
now we want to make the valuated stock value of material in TC MC.9 to zero.
how can we do this.
plz suggest
thanks

Hello,
this issue may be related to incorrect postings of accouting documents, or missing accouting documents (i.e not considered price changes). Best would be to have this analysed by SAP via an OSS message.
Kind regards
Michael

Upload BOM , Work Centre, Extend material to diff plants

Hi,
Pl give me idea how to upload bom from excel to sap system by LSMW.
Thanks.
Sanjukta

Use the TCode LSMW and follow the steps..
For LSMW tutorial, refer to
http://www.sapbrainsonline.com/TUTORIALS/TECHNICAL/LSMW_tutorial.html
http://www.sapbrainsonline.com/TOOLS/LSMW/SAP_LSMW_steps_introduction.html

Stock in transit with respect to Delivery

Hello MM Gurus,
I created a Transport scheduling Agreement with SD route ( Intra company). I created a Delivery in VL10B & Post the Goods issue through 641 Mvt. In recieving plant I post the GR against delivery. I am developing a report for stock in transit Qty with respect to the delivery. How can I link the delivery to Stock in transit Qty?.Please guide me how to proceed.
Regards
Senthil

Hi
Stock in Transit can be viewed in report MB5T.
In the Material document of the 641 movement you have the
delivery note number present done through VL10B.
In that way you can link up the Goods in transit to the delivery.
In table MKPF & MSEG you can get the delivery note number.
Thanks & regards
kishore

Want to see the stock of different variants with same configurable material

I have the stock for configurable material with different variants. Now I can see the cumulative stock
for that configurable material. But my requirement is that I want to see the stock for every variant
belonging to the configurable material.
How can I get it?

hello anant,
In my opinion for sure standard sap report cannot display the stock for a individual configuration.(Variant)
Reason:characteristics display/hide function is very dynamic dependeding on the dependency and interdependency.
The only option is by a report CL30N plus abap. Since we cannot keep anything in stock for a configurable material. You need to identify all open sales order and stock position OR through material movements and then find the produciton order and then read all char. values.
I assume you are not taking about variant materials.
Reg
Samson.

Movement type for transfer of stock from Stock-in-transit to Vendor

Hello,
Is there any movement type for transfer of stock from Stock-in-transit to Vendor.
For internal transfer from Plant to Plant we follow Purchase Requisition -> Stock Transfer Order (PO Modified) -> Delivery (VL04) -> MIGO (Goods Receipt against Delivery) method.
The problem arises when the actual delivery quantity is less then what is entered in the system (due to clerical error). That is, physically less quantity were dispatched and received at the receiving plant. Now the balance quantity is lying as stock-in-transit. To clear it we are receiving the material and using transfer posting for plant to plant transfer. Though physically there is no transfer of goods. Now we do not want to receive the material instead we want it to transfer from stock in transit to the supplying plant. Is it possible ?
Thanks.
Ashish

Hi Ashish,
When You issue the stock, the accounting document is posted . There is no accounting entires when you do Goods receipt at receving plant . In case , we are developing to make it happen , I feel it may have impact on the Material Valuation aspects .
Hence, I feel it is better to adopt any of the following 2 options.
1) Cancellation of the entire delivery and make new delivery or 2) Receive the entire qty at the receiving plant and decide what you want to do with the unavl qty . For example in your case of loss of material due to accident , you can scrap the material in the receving plant itself or return the material back to the sending plant.
Regards
Mani

To clear stock in Transit - MB5T

Hi All,
I done a Stock Transport Order with 351 and 101 Mvt type.In MB5T i have a material with quantity w.r.t PO.
Not possibe to cancel that GI document..Kinly clarify how to clear the stock in transit.
Thanks and Regards
SAP MM User

Hi,
At the issuing plant with 351 Mvt, you'll find the stock in MB5T as "stock in Transit" at the recieving plant.
After making GR 101 at recieving Plant, this quantity will cleared automatically.
Now tell me what's the issue ypu are facing?
Once 101 is done, you can not cancel 351 material document. For that you have to reverse 101 first and the 351 reversal
Umakanth R

I want to Take Stock in Transit Report

Hai,
I want to Take Stock in Transit Report for a plant with Qty & Value with Posting Date..
So I can get the report Ex: Before April 1 2009.
MM5t & MC.9 Not upto my requirement.. Any table or tcode is there.?

Hi ,
In MB51 you can ehter the posting date
plz follow the following step
SPRO -- Materials Management --Inventory Management and Physical Inventory -- Reporting - - Define Field Selection for Material Document List-- enter RM07DOCS -- and field and table name MKPF --BUDAT and activate the check box
hope this will help u

Interco- Stock in Transit

Hi Experts
Scenario: Intercompany STO. Shipping plant posted the Goods issue and the material is in Transit.
Now how do i get the stock in Transit Material cost (Std Cost) in Report.
I used the MB5T it shows the Purchase Order Net Value only and not the STD cost of Recieving plant. MB52 not clear as well.
Could any one advise...
regards
RG.

Hi,
Stock in transit keyfigure will display only EI orders (incase of VMI
scenario) and AH orders (if you create inbound delivery).
If you integrate stock,CS orders only will be available in /sapapo/RRP3.
The root of the problem is in the setting from Intransit key figure:
from a planning area management point of view it reflects
the setting used in the standard SNP planning area but the customizing
of the category group used there is different from the one used in
standard systems.
Actually you added category CS there. But category CS has a atp category
type 0, which means stocks actually. In the SNP planning books by design
stocks are read separately from other orders because have to be
considered in the ATD computation.
Therefore if you need to read orders with category CS you should
consider it in the category group assigned to the ATD receipts key
figure and to the stock key figure.
This customizing could be applied at the planning area level, as
described above or at the master location level, SNP tab.
In this case you can specify there the category groups which have to be
used in order to consider stocks, ATD receipts and ATD issues about all
products assigned to the used master location. Please refer to the
related F1 helps in order to get more information about.
You can get more information at note 591310.
Regards,
Sunitha

Cancel insp.lot for batch material with serial number?

We have a problem with an inspection lot....
A few months ago we made a goods receipt for batch material... it ended up in Q- stock.
The weeks went by and the material was changed ito a serial number material... that process works fine...
But now we want to scrap the material that is batch-handeled ... the inspection dont want to let go.. it want serial numbers... even if I create serial numbers for this the inspection lot
dont let me register any numbers.. So I cant cancel/delete it... And after all I just want to scrap the batch...
Can someone help me?
// Andreas

if stock of that material with serial numbers exist, then scrap that stock and disable the serial number for the material by deleting the serial number profile in the work scheduling view of the material master.
then try cancelling the inspection lot. After cancelling the inspection lot, activate the serial number for that material again and bring back the scrapped stock into the unrestricted use.
Note: please advice the users not to post any stock for that material till you complete this or else block the posting t.code for all the users.

Reverse Stock In Transit

Hello all,
Case is
In PO qty = 5.008 KG
Delivery = 5.00 KG
PGI = 5.00 KG
When doing GR in receiving plant: Error for Qty Exceeded by xxx KG
In MB5T qty = 5.008 KG
Now i want to reverse the PGI
When I reverse the PGI [641 Mvt] thru VL09, i get error message
Deificit of PL Stock in Transit 0.013 KG ....
How I can transfer deficit qty 0.013 in Stock in transit so that i can reverse the PGI?
Thanks

Hello ,
Jurgen explained is correct, But if want to reverse the stock in Transit material
Case is
In PO qty = 5.008 KG
Delivery = 5.00 KG
PGI = 5.00 KG
When doing GR in receiving plant: Error for Qty Exceeded by xxx KG
In MB5T qty = 5.008 KG
Now i want to reverse the PGI.
If you have issue the material from supplying plant means then stock is showing in stock in transit. System will not allow you reverse the stock in transite by normal movment type.
Std SAP has given reverse the "stock in transite" material from Stock in transite position through movement type 557.
Using movement type 557, you can correct purchase-order-independent stock in transit if
-   a good receipt cannot be posted to a purchase order without stock in transit, even though there is still stock in transit
    according to the purchase order history
-   stock in transit still exists, even though there are no open stock transfer orders for the particular material.
Regards
Mahesh Naik.

Intial upload of Stock in Transit Material with in plant / Inter company

Similar Messages

Maybe you are looking for