Intialization process help needed

Dear all,
I am trying to create an intialization process and I have stumbled upon an error which confuses me.
The scenario is to distribute business partners between B1 2007 A instances.
The B1iSN version is PL13.
Here is what I tried.
- I created a new scenario through Graphical Scenario Design.
- I modified (through Graphical Scenario Design) the newly created scenario to change ProcessType to "S" and to Classification="I".
- I manually modified the BizPackageMETA.xml to set isLastStep and isMandatory to "yes" for UIStep 5 in UIStepList.
- I created and activated an Initialization process in SAP B1iSN Admin Console.
- After clicking on Initial Load button I received the following error:
IPO Step:
/SemStart/com.sap.b1i.datasync.ipo/SemStart/SemStart.ipo/SemStart
Technical Error:
com.sap.b1i.xcellerator.XcelleratorException: XCE001 Nested exception: com.sap.b1i.bizprocessor.BizProcException: BPE001 Nested exception: com.sap.b1i.xcellerator.XcelleratorException: XCE001 Nested exception: com.sap.b1i.xcellerator.XcelleratorException: XCE001 Nested exception: java.lang.Exception: com.sap.b1i.xcellerator.XcelleratorException: XCE087 The destination IPO-Step URI for an internal Service-Call is empty!
I checked the status of SemStart.ipo in SAP B1iP ControlCenter and it's active.
The IPO-Log for SemStart.ipo shows the above error as long as a the below warning:
Level  WARNING
Logger com.sap.b1i.xcellerator
Class/Method com.sap.b1i.xcellerator.SingleAdapterPool$SingleAdPoolFactory, createItem
Thread 12035
XCL034 Error on creation of an Adapter-instance for Adapter SRVC
Could anyone please help me resolve this issue?
Thanks in advance,
Charalampos

>
vasu natari wrote:
> Hi,,
>
> I guess there is some problem with the XSL file. Please check it..
>
> Vasu Natari.
Hi,
Thanks for your reply.
If the XSL file was wrong, I believe I would get a message in the Message Log in SAP B1iSN Admin Console, but I don't get any messages in the Message Log.
Kind Regards,
Charalampos

Similar Messages

  • HT5631 how do I verify my apple id? I can't sign in to it in mail and I can't make a new one because it just will not process I'm trying to set up iCloud between iPad and iPhone and having ALOT of difficulty pleAse help need it done by later on today!!!!!

    how do I verify my apple id? I can't sign in to it in mail and I can't make a new one because it just will not process I'm trying to set up iCloud between iPad and iPhone and having ALOT of difficulty pleAse help need it done by later on today!!!!!

    In order to use your Apple ID to create an iCloud account, the primary email address associated with the ID must first be verified.  To do this, Apple will send a verification email to your account and you must respond to the email by clicking the Verify Now link.  Make sure you are check the spam/junk folder as well as the inbox.  If it isn't there, go to https://appleid.apple.com, click Manage your Apple ID, sign in, click on Name, ID and Email addresses on the left, then to the right click Resend under your Primary Email Address to resend the verification email.

  • Urgent help needed on Macros

    Hi APO Gurus...
    I want to know how to use Drill_Up and Drill_ Down macros in batch jobs. they work beautifully in interactive mode, but when processed in batch jobs they drill up only for the particular CVC's at the aggregated level specified in the job. We are  selecting all the characteristics in the aggregation level while creating the job. Then we want to drill up on particular characteristic. We are using a collective macro with first macto for drill up and second macro for calculations at the aggregated level. It works fine in interactive mode but drill_up doesnt seem to work in batch jobs.
    Help needed

    Hi,
    You should not be using DRILL_UP and DRILL_DOWN functions in background jobs. Whatever processing you need to do after DRILL_UP should be a separate macro and that should be executed in background at the desired aggregation level (set for the job).
    There is no point in using a collective macro with a DRILL_DOWN, processing and DRILL_UP steps in background job.
    Thanks,
    Somnath

  • URGENT HELP NEEDED - iPhone 3Gs no longer detected or charged by MacBook

    My iPhone 3Gs (3.1) has been running fine, until several hours ago today, when I plugged it to my MacBook, the iPhone is no longer detected - it doesn't show up in iTunes, nor it is charged. I tried opening iPhoto, and it wasn't there too. Not with Image Capture too. I tried charging it using the out-of-box wall charger using the same out-of-box USB cable I use for MacBook, and it can be charged without any problem. Then I put it into Recovery mode, and there iTunes can see it. I don't want to restore it before I figure out exactly what went wrong, as I don't want the restore process somehow gets stuck in the middle that the connection is lost again.
    I've tried reinstalled iTunes, including completely removal of Apple Mobile Device Support, as instructed by Apple. But still no luck.
    I've tried switching to another USB port of my MacBook. No luck.
    My iTunes is the latest 9.0.1, and my Mac OSX is 10.6.1. My iPhone is on 3.1, upgraded from 3.0.
    I've read from web that it seems I'm not the only one out there having this problem. But none of them seem having any real working solution.
    Urgent help needed & appreciated. Millions of thanks in advance.
    Gary

    1. I used both cables - theirs & mine ... and on several macs
    2. yes, same cable for wall & mac
    3. as said, i did completely remove & install itunes (incl. apple mobile device support), as instructed on the apple webpage
    anyway, did a restore just now. it seems okay now. but the problem is i have no idea what cause this, and i can't replicate the problem. so i don't know when it will happen again ... maybe a bug with os 3.1 ... others on web said os 3.1 is quite buggy ...

  • Help Needed..Fingerprint Identification..Image Manipulation

    Norfolk State University Student (Help Needed):
    I'm working on Fingerprint Identification using image correlation and/or a feature-based approach.  First, Goal is to minimize the lines of the minutia so that they are one pixel thick.  What services does Labview offer that will help me accomplish this task??

    Hey Snakehead...,
    Have you tried improving your original image with better lighting, better camera, better lens, etc.? What image processing have you done already, or are you starting from scratch? I agree with AnalogKid in providing some sample images to the forum so we can get an idea of what you are working with. Have you performed any morphology processing on the image? Have you tried edge detection functions? There are numerous functions that NI provides with their NI Vision software that will help you process your image, it is just finding the right combination that is the toughest part. Last, if you do have the Vision software, I might suggest taking a look at the Vision concepts manual to get an idea of the different functions and their capabilities. Let us know what kind of images you are working with and what you have done so far, and last, what you would like to eventually see. Thanks, and have a great day.
    Regards,
    DJ L.

  • HELP NEEDED PLEASE

    Hi everyone
    Programming help needed here. Any advice would be greatly appreciated!!!
    I have been assigned some work for a program called Processing 1.0 availale at http://processing.org/download
    I was give the 9 individual programs I needed to make however they were converted to Java files from .pde files. The program is based on Java but only runs .pde files and NOTHING else!
    I decompiled the files and got the source code, but it is a slight variation of the original someone made in processing, and needs some tidying to get it to run.
    I think the programs are very simple for a programmer, although I AM NOT.
    CODE is BELOW
    // Decompiled by DJ v3.10.10.93 Copyright 2007 Atanas Neshkov Date: 02/05/2009 13:15:00
    // Home Page: http://members.fortunecity.com/neshkov/dj.html http://www.neshkov.com/dj.html - Check often for new version!
    // Decompiler options: packimports(3)
    // Source File Name: Assign2_1.java
    import processing.core.PApplet;
    public class Assign2_1 extends PApplet
    public Assign2_1()
    SquareSide = 20;
    Rank = Nums.length;
    Side = SquareSide * Rank;
    Green = color(0, 255, 0);
    Yellow = color(255, 255, 0);
    BG = Yellow;
    public void setup()
    size(Side, Side);
    background(BG);
    fill(Green);
    for(int i = 0; i < Rank; i++)
    rect(i * SquareSide, 0.0F, SquareSide, SquareSide * Nums);
    public static void main(String args[])
    PApplet.main(new String[] {
    "--bgcolor=#ece9d8", "Assign2_1"
    int Nums[] = {
    6, 14, 8, 9, 2, 3, 4, 2, 8, 3,
    9, 2, 0, 5
    int SquareSide;
    int Rank;
    int Side;
    int Green;
    int Yellow;
    int BG;
    Edited by: chevy1 on May 2, 2009 7:32 AM

    HELP NEEDED PLEASEShouting is a good way ensure you don't get help. Also you should give a meaningful subject.
    Any advice would be greatly appreciated!!!I suggest you ask a question after providing enough information to be able to answer it.
    Also use CODE tags when posting code as it make the code more readable.
    We are more likely to help people who are trying to learn Java rather than someone who might be looking for an easy way out of doing an assignment.

  • Help needed to run JSTL 1.1 in Tomcat 6.0.16

    Hi All,Help needed to run JSTL 1.1 in Tomcat 6.0.16. I am trying to run the example given in http://tomcat.apache.org/tomcat-6.0-doc/jndi-datasource-examples-howto.html The example tries to connect to MySQL database from JSP using JSTL and JNDI Datasource.I am running the example using Eclipse 3.4.2 using Sysdeo plugin to start and stop Tomcat server from Eclipse IDE.
    My web.xml file has <web-app xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://java.sun.com/xml/ns/javaee" xmlns:web="http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd" id="WebApp_ID" version="2.5">
    </web-app>
    and test.jsp has proper taglib directives
    <%@ taglib prefix="sql" uri="http://java.sun.com/jsp/jstl/sql" %>
    <%@ taglib prefix="c" uri="http://java.sun.com/jsp/jstl/core" %>
    I have placed the jstl.jar and standard.jarof the jakarta-taglibs-standard-1.1.2.zip under E:\Deepa\workspace\DBTest\WebContent\WEB-INF\lib directory also placedcontext.xml file under E:\Deepa\workspace\DBTest\WebContent\META-INF and the content of context.xml is as below
    <Context path="/DBTest" docBase="DBTest"
    debug="5" reloadable="true" crossContext="true">
    <Resource name="jdbc/TestDB" auth="Container" type="javax.sql.DataSource"
    maxActive="100" maxIdle="30" maxWait="10000"
    username="deepa" password="mysql" driverClassName="com.mysql.jdbc.Driver"
    url="jdbc:mysql://localhost:3306/javatest?autoReconnect=true"/>
    </Context>
    Now while running the example, Eclipse creates one DBTest.xml file under C:\Program Files\Apache Software Foundation\Tomcat 6.0\conf\Catalina\localhost
    which has the following line:
    <Context path="/DBTest" reloadable="true" docBase="E:\Deepa\workspace\DBTest" workDir="E:\Deepa\workspace\DBTest\work" />
    I am getting the following error when running http://localhost/DBTest/WebContent/test.jsp
    in Browser:
    <HTTP Status 500 -
    type Exception report
    message
    description The server encountered an internal error () that prevented it from fulfilling this request.
    exception
    org.apache.jasper.JasperException: The absolute uri: http://java.sun.com/jsp/jstl/sql cannot be resolved in either web.xml or the jar files deployed with this application
    org.apache.jasper.compiler.DefaultErrorHandler.jspError(DefaultErrorHandler.java:51)
    org.apache.jasper.compiler.ErrorDispatcher.dispatch(ErrorDispatcher.java:409)
    org.apache.jasper.compiler.ErrorDispatcher.jspError(ErrorDispatcher.java:116)
    org.apache.jasper.compiler.TagLibraryInfoImpl.generateTLDLocation(TagLibraryInfoImpl.java:315)
    org.apache.jasper.compiler.TagLibraryInfoImpl.<init>(TagLibraryInfoImpl.java:148)
    org.apache.jasper.compiler.Parser.parseTaglibDirective(Parser.java:431)
    org.apache.jasper.compiler.Parser.parseDirective(Parser.java:494)
    org.apache.jasper.compiler.Parser.parseElements(Parser.java:1444)
    org.apache.jasper.compiler.Parser.parse(Parser.java:138)
    org.apache.jasper.compiler.ParserController.doParse(ParserController.java:216)
    org.apache.jasper.compiler.ParserController.parse(ParserController.java:103)
    org.apache.jasper.compiler.Compiler.generateJava(Compiler.java:154)
    org.apache.jasper.compiler.Compiler.compile(Compiler.java:315)
    org.apache.jasper.compiler.Compiler.compile(Compiler.java:295)
    org.apache.jasper.compiler.Compiler.compile(Compiler.java:282)
    org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:586)
    org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:317)
    org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:342)
    org.apache.jasper.servlet.JspServlet.service(JspServlet.java:267)
    javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
    In the Tomcat Server console, I am getting the following error:
    INFO: Server startup in 7295 ms
    May 20, 2009 6:36:48 AM org.apache.jasper.compiler.TldLocationsCache processWebDotXml
    WARNING: Internal Error: File /WEB-INF/web.xml not found
    May 20, 2009 6:36:48 AM org.apache.catalina.core.StandardWrapperValve invoke
    SEVERE: Servlet.service() for servlet jsp threw exception
    org.apache.jasper.JasperException: The absolute uri: http://java.sun.com/jsp/jstl/sql cannot be resolved in either web.xml or the jar files deployed with this application
    what is the problem with my code?
    When running the same example, by creating a local server in Eclipse(creating new Server connection pointing to same Tomcat 6.0 installation) it runs fine without any error.

    Hi evnafets,
    Wow, very helpful information, great insight into working of Eclipse. Thanks a lot.
    I have one more question. I have a context.xml file under {color:#0000ff}E:\Deepa\workspace\DBTest\WebContent\META-INF{color} folder and that has the Resource element to connect to MySQL database:
    {code{color:#000000}}{color}<Context path="/DBTest" docBase="DBTest" debug="5" reloadable="true" crossContext="true">
    <Resource name="jdbc/TestDB" auth="Container" type="javax.sql.DataSource" maxActive="100" maxIdle="30" maxWait="10000" username="deepa" password="mysql" driverClassName="com.mysql.jdbc.Driver"
    {color:#0000ff}url="jdbc:mysql://localhost:3306/javatest?autoReconnect=true"/>{color}
    {color:#0000ff}</Context>{color}As usual when running application in local Tomcat server of Eclipse, this data source works fine. But when I run the application on Tomcat, by starting Sysdeo plugin from Eclipse, the DBTest.xml file created in C:\Tomcat 6.0\conf\Catalina\localhost has the context entry as<Context path="/DBTest" reloadable="true" docBase="E:\Deepa\workspace\DBTest\WebContent" workDir="E:\Deepa\workspace\DBTest\work">
    </Context>The<Resource> element I have specified in the context.xml of \WebContent\META-INF folder is not taken into account by Tomcat and it gives the following error:May 21, 2009 5:20:04 AM org.apache.catalina.core.StandardWrapperValve invoke
    SEVERE: Servlet.service() for servlet jsp threw exception
    javax.servlet.jsp.JspException: Unable to get connection, DataSource invalid: "org.apache.tomcat.dbcp.dbcp.SQLNestedException_: Cannot create JDBC driver of class '' for connect URL 'null'"
    _at org.apache.taglibs.standard.tag.common.sql.QueryTagSupport.getConnection(_QueryTagSupport.java:276_)
    at org.apache.taglibs.standard.tag.common.sql.QueryTagSupport.doStartTag(_QueryTagSupport.java:159_)
    at org.apache.jsp.test_jsp._jspx_meth_sql_005fquery_005f0(_test_jsp.java:113_)
    at org.apache.jsp.test_jsp._jspService(_test_jsp.java:66_)
    at org.apache.jasper.runtime.HttpJspBase.service(_HttpJspBase.java:70_)
    at javax.servlet.http.HttpServlet.service(_HttpServlet.java:717_)
    at org.apache.jasper.servlet.JspServletWrapper.service(_JspServletWrapper.java:374_)
    at org.apache.jasper.servlet.JspServlet.serviceJspFile(_JspServlet.java:342_)
    at org.apache.jasper.servlet.JspServlet.service(_JspServlet.java:267_)
    at javax.servlet.http.HttpServlet.service(_HttpServlet.java:717_)
    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(_ApplicationFilterChain.java:290_)
    at org.apache.catalina.core.ApplicationFilterChain.doFilter(_ApplicationFilterChain.java:206_)
    at org.apache.catalina.core.StandardWrapperValve.invoke(_StandardWrapperValve.java:233_)
    at org.apache.catalina.core.StandardContextValve.invoke(_StandardContextValve.java:191_)
    at org.apache.catalina.core.StandardHostValve.invoke(_StandardHostValve.java:128_)
    at org.apache.catalina.valves.ErrorReportValve.invoke(_ErrorReportValve.java:102_)
    at org.apache.catalina.core.StandardEngineValve.invoke(_StandardEngineValve.java:109_)
    at org.apache.catalina.connector.CoyoteAdapter.service(_CoyoteAdapter.java:286_)
    at org.apache.coyote.http11.Http11Processor.process(_Http11Processor.java:845_)
    at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(_Http11Protocol.java:583_)
    at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(_JIoEndpoint.java:447_)
    at java.lang.Thread.run(_Thread.java:619_)
    {code}
    So to overcome this error I had to place the <Resource> element in DBTest.xml under C:\Tomcat 6.0\conf\Catalina\localhost {color:#000000}and then it works fine. {color}{color:#ff0000}*Why is the context.xml file in META-INF not considered by Tomcat server using Sysdeo Plugin?*
    *Thanks,*
    *Deepa*{color}
    {color}
    Edited by: Deepa76 on May 26, 2009 9:32 PM

  • Replacement Needed. This iphone is not able to complete the activation process and needs to be replaced. Please visit your nearest apple store or authorized service center.

    Probably will never ever think of buying a locked phone from AT&T cause its one of the worst system integrations ever that these companies could think of.
    The entire problem started when I put in a request with at&t to unlock my iphone 4s (ios7) which did get approved. I performed the entire instructions they asked me to do, which is to backup and restore. After doing those instructions my iphone gave me an error message below
    The SIM card inserted in this iPhone does not appear to be supported.
    The SIM card that you currently installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information.
    Basically saying that at&t hasn't still unlocked the iphone which a really helpful apple executive was able to confirm. I initiated another unlock process from at&t in order to unlock the iphone, just to be sure that its not something wrong from my end. The nice at&t lady stayed on chat with me to unlock the iphone step my step while I was calling the apple tech too. And the apple tech confirmed again that the iphone is locked to at&t.
    Now, just a few minutes ago I tried another restore to see if any progress is being made and to my surprise I got an error message saying
    Replacement Needed. This iphone is not able to complete the activation process and needs to be replaced. Please visit your nearest apple store or authorized service center.
    I feel like I am just going around these two different "money hogger" companies which set certain rules and regulations to screw a regular phone buyer. I purchased this iphone in USA and trying to unlock in India, is it really this hard to simply unlock a device.
    For now I am going to try to call a apple office in india (apprently we don't have very many out here) and see if they can help me. But any other assistance regarding unlocking an iphone 4s would be helpful. I have however, tried checking IMEI.info, called up apple, talked to at&t (which always say go talk to apple) I do have a case number from apple as well in case an apple executive reads this discussion forum (case number: 566383594)
    Thanks

    You got a confirmation from AT&amp;T that it was authorized. Is this correct? - Yes i did get an email authorization on the 21st.
    Then you connected the phone to a computer with the latest version of iTunes installed. You clicked on the phone's name in iTunes, then clicked "Backup Now". - Yes
    When that finished you clicked "Restore iPhone" (NOT "Restore Backup") - Yes
    Are you with me so far? - Yes.
    And @ Varjak is right that after the 3rd restore I get the replacement error. 
    Plus I have NEVER jailbroken the iPhone. To give you another update, I spoke to a really nice apple tech in India who was atleast able to get me out of the replacement error by doing a recovery mode option. However, the lastest restore still gives me the same error
    The SIM card inserted in this iPhone does not appear to be supported.
    The SIM card that you currently installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information.
    Message was edited by: jabgars

  • Help need to switch Muse site to BC on a allready hosted plan

    Hi,  i also posted on BC forum...
    I have a client that was in a hurry to have his emails accounts before the entire website.
    So i went on and bought the email marketing plan (cos he will also need to do email campains) an pointed his domain everything is working fine, at this moment he has his accounts the domain is live.
    The site would be just a small 7-10 pages not to complicated.
    Has a graphic designer (who has venture into Business catalyst cos it had all the solutions i needed, well that's what the promotional videos said anyway) I made a site in Muse.
    First i did a temporary page thats says "comming soon", and then i made the entire site, all the design and menu but with blank pages cos the client didnt have all the content yet (and still dont have). I uploaded that site to a sub directory so he could see the evolution.
    He approved the design, yay!
    At the end of the process, he told me he needed to have full control with the editor. (style, images, bulleted list, need to put downloadable document like pdf etc.) i told him that he could only modify what was allready there with the Muse in Browser editing (that he saw when i made the pitch using another site) he was impress with the way it worked.
    so i told him i would have to remake "template".
    I thought of using a BC template, and modify the looks to adapt to my client image, Of course, use a responsive theme so he could make the change at one place only. (cos in Muse you need to make the changes on the 3 layouts).
    Now, i created a new temporary site using one of the new responsive template available.
    How can i import that new site onto his live domain? In other words, how can a switch from a theme made in Muse, to a BC template?
    cant i just delete everything in the root folder, and upload the entire new site via ftp?
    please help me find the solution. i am a bit in a panic here
    hope you could understand my lousy English.
    Sincerely,
    i.d.

    This would need to be transparent for m'y client...
    Y
    Envoyé de mon iPhone
    Le 2014-04-20 à 15:29, Sanjit_Das <[email protected]> a écrit :
    Re: help need to switch Muse site to BC on a allready hosted plan
    created by Sanjit_Das in Help with using Adobe Muse CC - View the full discussion
    Thanks for additional details.
    Unfortunately we cannot change site template of a live site in BC , but as a workaround Create a site from BC using the template you wish to use then publish the site from Muse to the site created from BC and transfer the contents stored from live site to trial site. Ater final transition is done , you can delete the already paid site and make live the new trial site which includes new site template.
    Thanks,
    Sanjit
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6314730#6314730
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6314730#6314730
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6314730#6314730. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Help with using Adobe Muse CC at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Help needed to zip file

    Hi abap gurus..i need some help from u guys..my problem is i need to zip a file calling unix OS cmd in my program before the file is FTPed.can any one gimme sample code on how to do this? before FTP processing i need to call unix OS and rar the file to be FTPed?
    thanks in advance

    Please refer this blog:
    /people/sameer.shadab/blog/2005/09/21/executing-unix-shell-script-using-operating-system-command-in-xi
    Need a clear example of how to implement CL_ABAP_GZIP

  • Data uload to ODS ending up with an error. URGENT HELP NEEDED!!!!!!

    Hi
    My Sceniro is Full load from ODS1 to 5 other ODS. Iam uploading the data to other 5 ODS by selecting 1 ODS at a time.
    Problem i am facing is upload is ending up with error mesg. Error Mesg are
    <b>Error 8 when starting the extraction program - R3019
    Error in Source System - RSM340
    Req xxx in ODS2 must have QM ststus green before it is activated - RSM1110</b>
    I have seen the the OSS notes for given error no, but they are not applicable to me. what could be the other possible solution.
    In detail tab of the monitor i see red light at Extraction step and Subseq. processing.
    Its quite urgent bcoz this error is occuring in Production system.
    Plzzzz urgent help needed.
    Thanks
    Rohini
    Message was edited by: Rohini Garg

    rohini,
    go to RSA1->Modeling->Source Systems and right-click on your BW system, and click on 'Replicate Datasources'.
    also, go to the ODS that's causing the problem (via RSA1->InfoProvider and go to your ODS), right click and click on 'Generate Export Datasource'.
    one more thing, make sure that all your record/s in the source ODS is active. if you're not sure manage its contents and click on 'Activate'. if there are any entries in the the next screen that comes up, you need to activate it first, then try everything again.
    let me know what happens. also try to look for error messages in ST22 and SM21 that may be related to this and post whatever possible error you see there here.
    ryan.

  • Help needed with 848p problem

    hi allll
     i have buyed new MSI 848p Neo and i have the following hardware  
    CPU: 2 GHZ 533 P4
    Memery : 256 DDR 2700
    GC: MSI 848 p
    HD: WD 10 GB
    when i connacted everting only the processer  fan was working the hard drive and the CD doesnot work (POST)
    if i unplage the Hard drive and the CD it will work (POST)  
    the problem is the Pc doesnot Post only the processer  fan and i have blank screen ?
    help needed
    thanks  

    Try this.
    Put your optical drives like CD-ROM drive to IDE 1 and set as Primary Master aka Master mode and put your HDD to IDE 2 and set as Secondary Master aka Master mode also.
    Btw, what is your PSU specs?

  • Troubleshoting help needed:  My iMac keeps crashing and restarting with a report detail: "spinlock application timed out"  What can I do to fix this?timed out"

    Troubleshooting help needed:  My iMac keeps crashing and restarting with a notice: "Spinlock application timed out"  What can I do?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the page that opens.
    Select the most recent panic log under System Diagnostic Reports. Post the contents — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports.

  • Help needed for writing query

    help needed for writing query
    i have the following tables(with data) as mentioned below
    FK*-foregin key (SUBJECTS)
    FK**-foregin key (COMBINATION)
    1)SUBJECTS(table name)     
    SUB_ID(NUMBER) SUB_CODE(VARCHAR2) SUB_NAME (VARCHAR2)
    2           02           Computer Science
    3           03           Physics
    4           04           Chemistry
    5           05           Mathematics
    7           07           Commerce
    8           08           Computer Applications
    9           09           Biology
    2)COMBINATION
    COMB_ID(NUMBER) COMB_NAME(VARCHAR2) SUB_ID1(NUMBER(FK*)) SUB_ID2(NUMBER(FK*)) SUB_ID3(NUMBER(FK*)) SUBJ_ID4(NUMBER(FK*))
    383           S1      9           4           2           3
    384           S2      4           2           5           3
    ---------I actually designed the ABOVE table also like this
    3) a)COMBINATION
    COMB_ID(NUMBER) COMB_NAME(VARCHAR2)
    383           S1
    384           S2
    b)COMBINATION_DET
    COMBDET_ID(NUMBER) COMB_ID(FK**) SUB_ID(FK*)
    1               383          9
    2               383          4
    3               383          2
    4               383          3
    5               384          4
    6               384          2          
    7               384          5
    8               384          3
    Business rule: a combination consists of a maximum of 4 subjects (must contain)
    and the user is less relevant to a COMB_NAME(name of combinations) but user need
    the subjects contained in combinations
    i need the following output
    COMB_ID COMB_NAME SUBJECT1 SUBJECT2      SUBJECT3      SUBJECT4
    383     S1     Biology Chemistry      Computer Science Physics
    384     S2     Chemistry Computer Science Mathematics Physics
    or even this is enough(what i actually needed)
    COMB_ID     subjects
    383           Biology,Chemistry,Computer Science,Physics
    384           Chemistry,Computer Science,Mathematics,Physics
    you can use any of the COMBINATION table(either (2) or (3))
    and i want to know
    1)which design is good in this case
    (i think SUB_ID1,SUB_ID2,SUB_ID3,SUB_ID4 is not a
    good method to link with same table but if 4 subjects only(and must) comes
    detail table is not neccessary )
    now i am achieving the result by program-coding in C# after getting the rows from oracle
    i am using oracle 9i (also ODP.NET)
    i want to know how can i get the result in the stored procedure itsef.
    2)how it could be designed in any other way.
    any help/suggestion is welcome
    thanks for your time --Pradeesh

    Well I forgot the table-alias, here now with:
    SELECT C.COMB_ID
    , C.COMB_NAME
    , (SELECT SUB_NAME
    FROM SUBJECTS
    WHERE SUB_ID = C.SUB_ID1) AS SUBJECT_NAME1
    , (SELECT SUB_NAME
    FROM SUBJECTS
    WHERE SUB_ID = C.SUB_ID2) AS SUBJECT_NAME2
    , (SELECT SUB_NAME
    FROM SUBJECTS
    WHERE SUB_ID = C.SUB_ID3) AS SUBJECT_NAME3
    , (SELECT SUB_NAME
    FROM SUBJECTS
    WHERE SUB_ID = C.SUB_ID4) AS SUBJECT_NAME4
    FROM COMBINATION C;
    As you need exactly 4 subjects, the columns-solution is just fine I would say.

  • Help needed I have a canon 40D. I am thinking of buying a canon 6D.But not sure that my len

    Hi all help needed I have a canon 40D. I am thinking of buying a canon 6D.
    But not sure that my lenses will work.
    I have a 170mm/ 500mm APO Sigma.
    A 10/20 ex  Sigma   HSM  IF.
    And a 180 APO Sigma Macro or do I have to scrap them and buy others.
    ALL Help will be greatly received. Yours  BRODIE

    In short, I love it. I was going to buy the 5DMark III. After playing with it for a while at my local Fry's store where they put 5DMII, 5DMIII and 6D next to each other, using the same 24-105L lens, I decided to get the 6D and pocket the different for lens later.
    I'm upgrading from the 30D. So I think you'll love it. It's a great camera. I have used 5DMII extensively before (borrowing from a close friend).
    Funny thing is at first I don't really care about the GPS and Wifi much. I thought they're just marketing-gimmick. But once you have it, it is actually really fun and helpful. For example, I can place the 6D on a long "monopod", then use the app on the phone to control the camera to get some unique perspective on some scenes. It's fun and great. GPS is also nice for travel guy like me.
    Weekend Travelers Blog | Eastern Sierra Fall Color Guide

Maybe you are looking for

  • Error message on confition fail in fucntion module

    Dear Friends I have requirement in function module where i need to set a condition on difference of start date and endate should not be more the 7 days. If it is more than 7 days then give some error message. Moderator message : FAQ. Spec-dumping not

  • Tool Palette (shortcuts) in FCP X?

    In FCP7 I was able to hit tttt (t 4 times) and this would automatically select everything to the right (forward). Does such a tool exist in FCP X?

  • Print PDF file directly to store printer

    Hi Gurus, Having not found a solution, we think we need help from you. We have searched forums and google but have not found adequate solutions. We are a retailer having different stores. Our main office is using SAP. Each store has its printer and d

  • Screen resolution keep switching

    Hello I have a T410s with a Inter HD Graphic (the only one). When I am connected with a beamer and duplicate the display, the screen resolution keep changing back and forth, and a popup from the Intel graphic controller tells me that the resolution i

  • V3-5727105 will not boot up from HDD or from Recovery CD.

    4 weeks ago when I switched on my laptop I got a blue screen message during start-up saying a problem had been encountered and it needed to restart to try to fix the problem, then just a dark grey screen and nothing.Laptop is only 7 months old.  Cont