Intiate Human Task returns complete without any human task intervetion

I created a simple BPEL flow with a Human Task element and I also tried some of the demo flows. When I initiate the task it immediately returns as COMPLETE. Irrespective of who I make the owner or approver for the task is. bpeladmin seems to be the one responding and marking the task as complete. Is there some configuration I am missing.
My JDeveloper is 10.1.3.1.0
BPEL 10.3.1.0
Has anybody encountered this problem?
Your help will be much appreciated.

Happy days. Glad I found this, been banging my head against the wall building a worklist demo - if in the human task definition you don't put anything under "Assignment and routing policy" then you'll get exactly this happen to you - the process will complete immediately, with no trace in the worklist application and no error that I can see.
I think an error, or at least a warning, should be kicked out in this scenario - be warned - it isn't !

Similar Messages

When going to another page on a website firefox will crash completely without any error message.

I have tried the troubleshooting tips provided by Firefox but problem keeps coming up.
I mostly have trouble with the ilovehits.com website.
All the links on the site menu work fine except the "Start surfing"
link......When I click on that link Firefox will crash and I am returned to my desktop.
I have to activate Firefox again to browse.

See:
*Firefox/Tools > Options > Advanced > General : Accessibility : [ ] "Warn me when web sites try to redirect or reload the page"
The setting in "Tools > Options > Advanced > General" is meant as an accessibility feature, as you can see by the label of that section, so that people with disabilities or people who use screen readers do not get confused and is not meant as a safety protection to stop redirecting.
See also:
*https://support.mozilla.com/kb/Options+window+-+Advanced+panel#General_tab
*http://kb.mozillazine.org/accessibility.blockautorefresh
*http://kb.mozillazine.org/Accessibility_features_of_Firefox

I attempted to update iTunes yesterday and I thought the process completed without any issues but when I tried opening iTunes today, I got an error message that said "iTunes was not installed correctly. Please reinstall iTunes. Error 7"

Attempted to update iTunes on January 23rd and it appeared to install properly. When I tried to open iTunes on January 24th, it would not open and gave me an error message that said "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 126)" I then tried to reintall iTunes and it again appeared to install properly but when it attempted to open, I was given the same error message.

Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. If you're using Vista or 7,now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP,head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever

A BPM process with out any human task

Hi All,
I am new bie to BPM. Can I create a BPM process without any human task?
Like start event, service task (or any other activity) & end event.
If it is possible, please let me know the proper steps to execute and test this process also.
Thanks,

Hi
Yes, ofcourse you can have a Process without any User Task. Ex: Start Node -> Service Task -> End Node. Start Node can be 2 things say like DB Adapater and File Adapter. Read something from DB from some table and put into the Text File.
But the thing is, BPM Process is more of Role Oriented. If you already saw, you define something called Swim Lanes and put each User Task in those Lanes and automatically users in that Role only can work on those Task.
If you do not have any such things like User Task, you don't even need to create a BPM Process. Just create a simple BPEL with your custom Payload.
Now, the most important question is how do you plan to trigger/start this process whether BPM or BPEL. Do you assign some users to the first Role and do users log into bpm/workspace and click the Link on the left side to start the process. ALSO since there is NO User Task, you will NOT have any Task Details Page and this means you MAY NOT even see the link on the left side in bpm/workspace.
The only option I could see is have BPEL. This BPEL will have a WSDL automatically generated. And you can use this WSDL to instantiate the task.
If your intention is to use this process/bpel in some other MAIN Process then it is totally possible.
Thanks
Ravi Jegga

Goods Return without any Document

Hi all,
I tried Goods Return (Sales) without any reference document (Invoice). The goods have received in warehouse in proper storage location and ATP(Available To Promise) is also increased. The only problem is Credit note cannot be generated. I tried to create credit note manually, but no result.
Tcode used : VA01
Order Type : ZG2
Returns with ref. to : w/o Original
Please tell me how to get credit note in this process.
Thanks,
Karan

Hi Karan,
Please provide the error log upon processing credit memo in reference to your return delivery.
iessa

Cluster Live Storage Migration completes without deleting the source virtual hard disk VHDX

Testing HV setup in a cluster of two nodes with shared FC storage. Storage is CSV on both nodes. Storage migration of a VM from C:\ClusterStorage\A to C:\ClusterStorage\B completes without any problem. Upon completion, the source VHDX
are still left at C:\ClusterStorage\A. The source files can be deleted manually. All is done through VMM "Migrate Storage" option. Why the storage migration does not delete the source files upon job completion? Thanks!

I have noticed this happens when the folders are "pre-staged". If I create a folder and then storage migrate all of the files into it then it will not delete from it. If I just put the files in the root of the CSV then it seems to work. I am
looking into the permissions of the system and seeing what changes on a folder when it is created by a user and not the system. This only appears to happen when I am doing some cleanup because of duplicate machine name subfolders recently that a tech created.
If you match the permissions to a system created VM it should work though.

Waiting for the previously running task to complete issue

I am running the full extract process , and one task SDE_ORA_InventoryProductDimension running for 18 hours and its status is "Waiting for the previously running task to complete"
but all running tasked are completed and left tasks are queued by this task, so what make this issue happen?
I restart the informatica server and the task running now!
but for this task I run before it has ten million records , and it always make the dataware house server's cache full and server down,
so how to handle this problem?
Edited by: Yu Yang on Apr 16, 2013 4:58 AM

Check if /*+ FULL(PER_ALL_PEOPLE_F) */ hint existed in the SDE_ORA_INVENTORYPRODUCTDIMENSION_FULL mapping Source qualifier?.
I suggest you to raise an SR and check with your DBA's if they can do something to improve the Performance.
Mark helpfull if it helps.
Regards,
Veeresh Rayan

Complete Task with Payload Problem -- no Human Task Drop Handler

I'm reading section 26.4.1 of Developer’s Guide for Oracle SOA Suite 11g Release 1 (11.1.1) E10224-01 where it refers to figure 26-5 Human Task Drop Handler for Creating the Task Display Form of section 26.4 Creating a Task Display Form.
I've generated taskDetails1.jspx. I highlight Task as in the figure and right click in askDetails1.jspx (design tab) but I don't get a Create JSF page dialog as in the figure.
I get a dialog with Insert Before Show Detail Spacer ... etc (no Create /Human Task/Complete Task with payload etc)
Do I need to position within a particular element ? or is this a bug ? wrongly documented?

Hi Diana, thanks for your reply.
You're probably right about 2 different error messages.
To the 1st one: I'm sure that status task is Assigned (to me). I received an email and I also reply on that email.
To error log: I found out that error log appears when I enable email endpoint on Complete Task service. But I managed to solve this problem. I set wrong user. Now I have here the same user as is written in login-config.xml so log seems to be ok.
So I created new task and tried to complete it via email. Now I receive email with another error:
LiveCycle ES has tried to process your request and encountered the following error:
com.adobe.idp.dsc.provider.service.email.impl.EmailProviderException: Error getting user context
This response to your original email
Subject:RE:Task Assignment - Process: WorkFlowClient/Test. Task 92 has been assigned to you.
Date Sent:Thursday, October 27, 2011 3:05 PM
Body:Complete
DO-NOT-DELETE: MTIxMSExNjAzITIwMTE=!
Attachments:
And to the last point: email endpoint is set up with TestPOP3@mydomain and user receiving email has jpetrla@mydomain. I use Lotus Notes as email client, I tried another account with gmail, but the result was same.
Now I really don't know to do...
Jan

ADF Task Flow Binding - Refresh ifNeeded being invoked even WITHOUT any Parameter change

Using JDeveloper 11.1.1.6.0
Issue: Task Flow Binding property "refresh = ifNeeded" seems to be triggered even without the mutation of the input parameter.
As per definition, "ifNeeded: refresh the ADF Region if the value of a task flow binding parameter changes." (Reference: 17.5 Refreshing an ADF Region)
Now for the setup which reproduces the issue.
I'll focus at the fragment bounded task flow level and will skip the jspx side.
taskflow: main-flow.xml
contains a single fragment mainFgmt.jsff
has a managed bean defined SampleBean.java as pageFlow scope.
taskflow: sub-flow.xml
contains a single fragment subFgmt.jsff
has an inputParameter SampleBean.java (because it is an input parameter, by default it will be at pageFlow scope)
!important - has a nested taskflow (task flow call as defined in the component pallete) called inner-flow (see below)
the nested taskflow is the default activity
the nested taskflow has an outcome pointing to subFgmt where outcome = "return"
taskflow: inner-flow.xml
contains a single fragment called stop.jsff
has a return activity without outcome = "return"
stop.jsff has a navigation pointing to the outcome.
Finally mainFgmt.jsff has a task flow binding (pageDef)
with id = "sub-flow.xml"
refresh = "ifNeeded"
parameter SampleBean being submitted as sub-flow's input parameter. (id=sampleBean, value=#{pageFlowScope.mainSampleBean})
Assume that code compiles.
In this scenario where the only tricky condition is the inner nesting (defined by !important), when the inner nesting decides to invoke its outcome to visit sub-flow's fragment, mainFgmt is restarting its taskflow which makes sub-flow start over again.
Another way of saying it is, if sub-flow starts a nested activity and that nested activity exits out to utilize sub-flow's view. The high level definition which is mainFgmt's refresh ifNeeded is restarting sub-flow.
In the above example if you notice, the bean (SampleBean) is not really being utilized except that it is completing the purpose of refresh=ifNeeded. This scenario is only to simplify the setup - in practical use this bean will be mutated to be utilized as a refresh mechanism.
Now interestingly, if I change the pattern a bit then the issue will not happen:
Don't use the nested taskflow (inner-flow) as the default activity, let a fragment of sub-flow hold the initial view.
Navigate to the nested flow.
Exit nested flow.
Everything works.
Now in this scenario, it seems like the sub-flow needs to have a view established first for it to be properly be used.
So my questions are as follows:
Can I consider the behavior of the refresh=ifNeeded as a bug in this usecase?
Would it be better to utilize a different way of refreshing (maybe combination of refresh condition) to get around the issue?
Is the use of the task flow as defined logical or does it cross any boundary or best practice that might be causing this behavior?

Hi,
actually you lost me in your description due to complexity. I lived under assumption that sub-flow already is a region on a view in main flow, but then you sad that
"!important - has a nested taskflow (task flow call as defined in the component pallete) called inner-flow (see below)"
which then confused me as to I have no idea if inner flow now is the second level nesting or first level nesting (should be second level nesting). If sub-flow is a region then having "has an inputParameter SampleBean.java (because it is an input parameter, by default it will be at pageFlow scope)" is an unnecessary broad scope because the region wont live longer than view scope.
Anyway, it seems that a region refresh is triggered by the lifecycle involved, which can be by design or a bug. I suggest you file a Service Request with support and provide a test case as purely from the description, its hard to parse and understand what is going on.
Frank

Creation an ADF Task Flow Based on a Human Task

Hello!
While creating ADF Task Flow Based on a Human Task, I can't bind New TaskFlow to task, which I choose in Dialog.
Details:
I Have:
BPM Project with PackageCreation.task
ADF Project in Same Application
I do:
1. in Application Navigator right click on ADF Project -> New -> Web Tier -> JSF -> ADF Task Flow Based on a Human Task
in creation Dialog I choose PackageCreation.task and Don't change name of New TaskFlow (automatically JDeveloper set this name to PackageCreation_TaskFlow)
I have After that:
new ADF Task Flow and my old PackageCreation.task.
Question:
Why my Task don't bind to created ADF task Flow based on it?
I think, that while creating ADF Task Flow Based on a Human Task it has to change my task, writing some thing like This (inside xml):
<taskFlowFileLocation>file:/D:/JDeveloper/mywork/SalesQuoteLab/EnterQuoteUILab/public_html/WEB-INF/EnterQuoteDetails_TaskFlow.xml</taskFlowFileLocation>
That xml element is creating in xml of *.task, while making auto-generation form for human task in BPM Project.

Juan C,
I use JDeveloper 11g Release 1.
May be I didn't explained my question correctly.
taskdetails1 is creating, and in Data Controls I have objects of my BPM Human Task Payload.
But in that file "PackageCreation.task" in source I can't find any link to instantly created TaskFlow.xml in my UI project.
So, I have
NEW project "PackageCreationUI" with PackageCreation_TaskFlow.xml in it (and TaskDetails1 file too).
AND Did't Changed PackageCreation.task in BPM Project.
If I use *"BPM form creation wizard"*, after creating project and TaskFlow in it I see Changes in PackageCreation.task in BPM Project, something like that:
<taskFlowFileLocation>file:/C:/JDeveloper/mywork/testApp/PackageCreationUI/public_html/WEB-INF/PackageCreation_TaskFlow.xml</taskFlowFileLocation>

JAVA API of Oracle BPEL, to access the "Task Form"(JSP) of a human task.

Hi,
Are there any JAVA API of Oracle BPEL, to access the "Task Form"(JSP) of a human task, to render the task form inside the custom worklist application.
Thanks,
Naga

I guess you mean accessing the task details and the payload from the java API.
Refer the below blog it will provide you the details
http://www.albinsblog.com/2012/05/update-human-task-payload-via-java-api.html
Regards
Albin I
Edited by: Albin on Sep 19, 2012 11:24 PM

Unable to open iTunes. I have completely unistalled and reinstalled multiple times without any resolution.

Unable to open iTunes. I have completely unistalled and reinstalled multiple times without any resolution. When I try to open it, a shadow/outline comes up as though the window is there but it is transparent and I am unable to see any content whatsoever. I am unable to take any action at all. Please help it's been doing my head in for a looooooooooooooong time!!! TIA

Also, in Task Manager, it always shows that iTunes is "Not Responding".
Cheers

UPC-A barcode without the human readable numbers underneath

Hello ,
I have a lifecycle designer 8.1 on windows 7 machine, my requirement is to place the UPC-A barcode without the human readable number underneath the bars and with the interspacing between the bars as 0.020.
Is the above requirement feasible and possible, please provide your inputs .
Thanks in advance.
Pooja

Hi Pooja, I've done a barcode project before so here's what I know about this topic.
First about the human readable text. This is mandatory according to the GS1 General Specification, so most UPC-A barcode generator tend to automatically add the text to create valid barcode image. If you really need to get rid of it, you might need to process the barcode image further after it have been created. I used this UPC-A creator, if you like you can check it out.
As for the interspacing between the bars, each symbol character consists of two bars and two spaces, each of 1, 2, 3 or 4 modules in width. In other words, find any UPC-A barcode, and you will see it's composed of bars and spaces with four different widths. Most barcode generator can allow you to adjust module width, i.e. the narrowest bar / space. So you can't set each space to 0.020, as they are not equal to each other in the beginning.
Hope this will help. If you there's anything more you need to know, I'd be glad to help.
Regards,
Catherine

A magazine's app on my iPad has stopped working. When I open the Newsstand folder and click on the app, the screen dims briefly, then returns to the Newsstand folder. The other app in my Newsstand folder (Wall Street Journal) opens without any problem.

A magazine's app on my iPad has stopped working. When I open the Newsstand folder and click on the app, the screen dims briefly, then returns to the Newsstand folder. The other app in my Newsstand folder (Wall Street Journal) opens without any problem, and this magazine's app opens just fine on my wife's iPad.
I have deleted the app and reinstalled it from the Apple store and that makes no difference. I have also done a hard reboot on my iPad with no result.
Any thoughts about what might be wrong?

Hey everyone in Apple world!
I figured out how to fix the flashing yellow screen problem that I've been having on my MBP! Yessssss!!!
I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
I followed the instructions on this page and here's what I did:
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process. Since I did that, my MBP boots up just like normal. No flashing yellow screen anymore!!
(Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
Let me know if this works for you!
Elaine

My firefox installation is complete on my PC with Win XP, the icons are up, but the program will not start... no process or anything in task manager... any idea what is going on?

bought a second hand laptop running Windows xp. When I go to download firefox, the installation goes seemingly smooth, but the program will not open. There are no firefox processes showing in task manager when I do this. I just downloaded chrome instead, but it sucks and I want firefox but my computer rejects it. This computer runs every other program I use without a hitch
== This happened ==
Every time Firefox opened
== after installation ==
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/533.4 (KHTML, like Gecko) Chrome/5.0.375.99 Safari/533.4

thanks chris for the reply back,i have solved the massive problem i have had with MF 3.6.3 it ws COMODO FREE FIREWALL i had a sneaking suspicion all a long it could have been that but was not sure?,my pc had slowed down since installing comodo i am pretty sure of that,there were lags and pauses ect ect on general usage of the pc even though cpu usage was ok?,so maybe if many pc users that have comodo firewall installed they might like to try a change to another firewall and see if it helps,i went back to OUTPOST FREE FIREWALL which i had for ages without ANY problems whatsoever.
regards
john
mozilla firefox build 3.6.3

Intiate Human Task returns complete without any human task intervetion

Similar Messages

Maybe you are looking for