Intra company stock transfer process with movement type 351 & 641

Hi Experts!!!,
I would like to know is it possible to have Intra company stock transfer process (Plant to Plant within same company code) setup done for with delivery and without delivery for same plant.
I am expecting process the setup as below for same supplying and receiving plant.
1. STO - 351 - 101
2. STO - Delivery - 641- 101.
Thanks in advance!!!
Regards,
Sopan Patil

You can do it by assigning another STO document type.
Eg. 'UB' with delivery and 'ZUB' without delivery process.
Regards,
Dominik Modrzejewski

Similar Messages

  • Automatic Creation of MIGO for stock transfer order with movement type 351

    I have used the BAPI - BAPI_GOODSMVT_CREATE_OIL to create the material document number. But the test ended with error "Goods movement not possible with mvmt type 351".
    Is there any ways to eliminate the above error....
    Friends need your help

    351 Goods issue for a stock transport order (without SD)
    The quantity is transferred from unrestricted-use stock in the issuing plant to stock in transit in the receiving plant.
    Movement type 351 is only used if the goods issue is posted without an SD delivery. A goods issue for a stock transport order with SD delivery is posted using movement type 641 or 643.
    The transfer posting is also possible for materials valuated separately.
    The goods issue for a stock transport order takes place using movement type 101.
    Possible special stock indicators: E, Q
    For special stock indicators E and Q and for purchase orders assigned to an account, ensure that the quantity is not posted to the stock in transit in the receiving plant.

  • Stock Transfer process with message SPED

    Hi guys,
    I am trying to set up a stock transfer process, with a cross company purchase order that generates an outbound delivery which output message, SPED, generates the replenishment delivery through its internal process (standard program /SPE/STO_ID_PROCESSING, routine STO_ID_CREATION).
    It works fine as long as I do not pack the output delivery item.
    But when I pack the item the message processing results in error VL059 'You canot add this item to the delivery'.
    Please note that the packaging material is not managed in stock and that the warehouse is not managed per HU.
    As no OSS Note seemed relevant, I tried with:
    - Delivery type, setting the 'Generation of Delivery Items for HU Packaging Materials' flag;
    - Delivery type, canceling 'Item Requirement' routine;
    - Item category determination, filling all possible entry... ;
    - Copy control, from delivery default order type to replenishment delivery with packaging item category;
    - Packaging material type, changing "Indicator: Generate Delivery Items".
    If you have any suggestion (maybe a combination of the above!) please help!
    Thanks,
    GR

    Hi MdZ and thanks.
    When the packaging material type is not set in customizing as a delivery item (if this is what you mean) I get exactly the same error.
    I tried to create a purchase order for the packaging itself and - after proper customizing - it did work.
    But still get the problem packing my outbound delivery item...
    If you mean something else please tell me.
    I read the FAQ, but find no useful information.
    GR

  • Restricted stock used in intra-company stock transfer

    Hi,
    Can anyone give me the link about the description and difference between unrestricted stock, restricted stock and blocked stock?
    And for intra-company stock transfer(in one company code), I would like to post goods issue with restriced stock. and in inter-company stock transter and third-party sales, I would not like restricted stock to be used. How can I configure in system?
    Many thanks,
    Aries

    Hi Attila,
    Thank you for your informaiton.
    For different delivery types, such as LF, NLCC, NL, the checking rule are all the same. It is very unreasonalbe
    because for NL(stock transfer under one company code), we would like restricted stock used and for LF and NLCC, we only want unrestricted stock. Due to the same checking rule for all the delivery types, changing checking rule will not meet the requirements for all the types. If there is a customizing to set checking rules for different delivery types. If there is not, how can I do modification to meet our requirement?
    Many Thanks
    Aries

  • Intra-company stock transfer between two ERP Systems without SAP APO

    Hi,
    I'm looking for information regarding the scenario Intra-company stock transfer between two ERP Systems without SAP APO.
    On help.sap.com, I can only find below image, but I'm actually looking for the configuration settings required to implement it.
    Does anyone have experience with this scenario?
    Thanks & regards,
    Oliver

    Hi Jagdeep,
    Thanks for the reply. I understand that I need to use iDocs and setup communication between both systems. What I am actually looking for is detailed information on the setup of the purchase order type and sales order type. Especially because there is no invoicing involved in this flow.
    Regards,
    Oliver

  • Cancel the excise invoice in Intra company stock transfer

    Dear Gurus,
    I have one issue in CIN.
    The following are the my sequence of operation.
    Intra company stock transfer.
    1. Purchase order with UB. (from plant A)
    2. Delivery ( from plant B),
    3. PGI ( from plant B),
    4.Excise Invoice ( from plant B to A),
    5. Billing ( from plant B),
    6. Creating Excise Invoice without purchase order Manually (from plant A),
    after PGI and Before MIGO.
    7. MIGO.
    Now i want to cancel the Excise invoice in Plant A.
    how can i cancel the excise invoice.?
    kindly provide the valid information.
    Thanks.
    Best Regards
    Anbu

    In T.Code: J1IIN, there is an option of deleting / cancelling the Excise Invoice. On the top most left hand side (after entering the Excise Invoice number) select Excise Invoice --> Cancel / Delete.
    Here it is possible to cancel the Excise Invoice.
    Regards,
    Rajesh Banka

  • Frieght for intra company stock transfer

    hi all,
    Greetings!
    Our requirement is to include the Freight cost included to the intra company stock transfer.
    Generally, we don't use any pricing procedure for intra company STO and ther is no condition tab for the PO.And the GR will be valuated at the valuation price of supplying plant.
    If we assign pricing procedure in the configuration for "Determine Schema for Stock Transport Orders" , how will the system find the valuation price of the supplying plant and include the freight cost to that. Is there any standard condition type available to capture the valuation price of supplying plant.
    Regards
    Gobinathan G

    Hi,
    U Can use the calculation Schema for STO.
    M/06--> RM2000 -- STO is the std template.
    Then under : Define Schema Determination
    Determine Schema for Stock Transport Orders
    Then based on the Document type in PO the Automatic pricing Procedure will trigger.
    you can maintain the Fright cost there.
    Accounting entries:
    Receiving plant Inventory a/c  : Dt
    Supplying Plant Inventory a/c : Ct
    Fright clearing A/C               : Ct
    SAM

  • Regarding Intra company stock transfer billing

    hi Curremntly i m doing Intra company stock transfer between two plants assigned to same company code but the billing document is not generating for the same.
    Doument type UB(me21n)------ Vl10b( background) -
    vl02n pgi
    Error:- The iten is not televant for  billing
    Kindly  help in getting the proforma invoice atleast after pgi

    Hello,
    Please check Note 109254.
    Regards,
    Raghavendra

  • GST/VAT not captured in intra company stock transfer in S_ALR_87012357

    Please advise why GST/VAT report S_ALR_87012357 is not capturing the tax codes in the GST/VAT report in case of intra company stock transfer postings. However with the documents that are tagged to vendors it captures the GST/VAT inthe report.

    Dear Srinivasan
    Happy new year to you
    You cannot control using 0VLP transaction for deliveries created w .r .t S T Os but it controls for deliveries created w  r. t sale orders.only sales orders and not purchase orders
    You will have to use user exit or BADI to control the over delivery You can use User Exit - LV50PFZA for STO Delivery Quantity Control ,ensure that while coding check logic has to be put in required Transaction Codes only otherwise this User Exit is called in all Delivery and Billing Transactions causing delay in execution..
    Regards
    Raja

  • How to control the goods receive in Cross-Company Stock Transfer process?

    Hi,
    we use the standard Cross-Company Stock Transfer process to transfer goods between company, we have a issue, for  example transfer order quantity(po) is 10 pc, devlivery order quantity is also 10 pc,but only issue 5pc.and then we use mb01 to receive goods.It can receive 10 pc!? is there anything wrong with my configuration?
    Regards,
    lance

    Hi,
    Can you explain WHY Cross-Company STO's can still be received by referencing the PO even if this has not been Goods Issued? 
    It has also occurred in our set up that the PO qty is 1000, GI was only 500, GR is also 500, but the remaining 500 can still be received even if it wasn't issued (referencing the PO).
    Regards,
    Lee

  • Valuation of subsequent Transfer Postings with Movement Type - 412 Q

    Hi,
    We are procuring raw material by raising Purchase order (without account assignment) and receiving it as unrestricted stock i.e. Plant stock.
    Whenever the material is required for a particular WBS element, then we are transferring the Plant stock to Project stock with Movement type 412 Q. That special stock is being used for Production orders which are created wrt that WBS element.
    Current valuation of Transfer posting with Movement type 412 Q is as follows.
    1. When we transfer the Plant stock to Project stock for the first time then System is valuating that stock at the Moving average price of raw material say Rs.50.
    2.After transfer posting, values are being updated in the Table QBEW as well as in the Report MBBS wrt Plant, Material and WBS element i.e Rs.50.
    3. Again, when we transfer the Plant stock of same material to Project stock for the same WBS element system is valuating the Project stock at Rs.50 instead of at the Moving average price of that material which is Rs.70 at that moment.
    So what we understand is that the system is valuating the further goods movements of that material (Project stock) is at the price of Rs.50 which was stored in QBEW table (which was updated at the first goods movement).
    So all consumption of that material (Project stock) is valuating at Rs.50, which is not resembling the Moving average price.
    Is there anyway to valuate the subsequent transfer postings of Plant stock to Project stock with the moving average price valid at that moment instead at the the price which is updated in QBEW table for the first goods movement?
    We can change through MR21, but it is not practically feasible to change the price at each and every time for Plant, WBS element and material. combination.
    Thanks & Regards
    Madhusekhar Gupta G

    Please read the explanation about the design with 412 Q movement  in OSS Note 180503 - Val. logic during transfer posting with reversal movem. type

  • Intra company stock transfer without delivery

    Hi,
    Can anyone give me the configuration steps for the intra company stock transport order by using UB type (Between two plants with in same company code) with out delivery.

    Hi,
    While I am doing Stock transport order I am getting the following error:
    "Not possible to determine shipping data for material 4500012"
    I have maintained the material 4500012 in both the plants.
    I am not quite sure to what you are trying to say but the cross company Stock Transport Orders can be done by:
    - Configure using transaction OMGN.
    - Depending upon the sending and receiving plants, maintain sales organization and customer data in customizing.
    - Maintain the supplying plant as a vendor and attach the plant to the vendor in the Vendor Master.
    - Material type has to be HALB or HAWA.
    - Ensure that the company with sales Organization has a plant to take care of stocking.
    - The PO used is NB and not Stock Transfer PO.
    Configure SD for inter-company billing to enable picking up the pricing procedure for billing.
    - Carry Out delivery through process delivery due list and billing through process billing due list.
    Otherwise, You need to configure your Stock Transport Order settings for your Cross-Company:
    Business Transaction to work.
    1. Customer No. for the Goods Receiving Plant - OMGN
    2. Availability Check- Checking Rule (if necessary) - OMGN
    3. Assign a Delivery Type for the Delivering Plant - OMGN (for Stock Transport Orders, NLCC)
    4. PO type (which i belive you have done) - OMGN
    5. Assign Vendor No. to the Supplying Plant (done) - VK02
    6. Assign Customer No. to the Purchasing Plant for the Inter-Compnay Invoice (but you need to assign this to the Sales Organization pre-assigned to the Purchasing Plant),
    IMG-SD-Billing-InterCompany Billing-Define Internal Customer No. by Sales Org
    ***and by the way for the Invoice to work between Cross-Compnay Plants, you need also to have a Sales Org for the Supplying Plant and a Pricing Determination Procedure.
    pherasath

  • Intra company stock transport order with delivery to subcontracting vendor

    Hi Friends,
    We have an issue with Intra company stock transport scheduling agreement with delivery to subcontracting vendor.
    We have a scenario where the component is provided by another plant (Plant A -Intra company) directly to subcontracting vendor and the subcontracting vendor processes the component and sends us(
    Plant B) the finished good.
    We have a subcontracting scheduling agreement created with the subcontracting vendor with Item category u201CLu201D for plant B .(Document type LPA)
    And we created the stock transport scheduling agreement with document type LU (Between Plant A to Plant B) by entering the subcontracting vendor number to the "EMLIF- Vendor to be supplied/who is to receive delivery" field but the check box "LBLKZ-Subcontracting vendor" is hidden in the delivery address tab.
    Field selection with document type (LU) and Field selection with transaction code (ME37) did not help to bring the field to the delivery address tab.
    As a result, when we do PGI from the supplying plant, the stock is posted to "in transit" (Movement type 641) instead of "Component provided to vendor" (Movement type 641 u2013 O)
    The same behavior for purchase order with document type UB as well/
    Is the movement type u201C641-O u201C supported by standard SAP or do we have any other workaround to address the requirement. ?
    Now we are in ECC 6.0 EHP3.
    Your inputs will be highly appreciated.
    Regards
    Gobinathan G

    Hello,
    This EhP4 feature addresses only the one step Stock Transport Order to subcontracting vendor for intra company.
    Does anybody know how to do a two steps Stock Transport Order to subcontracting vendor for intra company?
    By "two steps" I mean:
    1- Goods Issue from supplying plant A to in-transit stock of the subcontracting vendor at receiving plant B.
    2- Inbound Delivery Notification (IDN) at receiving plant B + Goods receipt against this IDN into the subcontracting stock at receiving plant B.
    Thanks and regards,
    Stéphane

  • Transfer posting with Mov Type 311E in MIGO with reference to SC-PO

    Hi,
    I am working with MTO scenario.
    I want to carry out transfer posting of material with movement type 311E against subcontracting Purchase Order which is sale order specific.
    However, system does not allow me to do the same. whenever transfer posting, PO & movement type is selected in transaction MIGO, item details entry tabs are displayed blank.
    Below steps are being follow:
    Scenario is MTO ( special stock subcontracting)
    1. Subcontracting PO no. 4500000147 against Sale Order no 61 created.
    2. RM code - 61, available stock 100 TO & batch no.0000000127
    3. Transfer material to vendor for processing through MIGO ( since it is a special sales order stock, transferring happens from SL 0001- Main Stores to SL VLSC -Virtual storage location) using movement type 311 E
    5. Item Data details tabs are blank.---This is the issue / error.
    Note: I am restricted to post transfer posting through MIGO-Transfer Posting (will not use MB1B) due to some enhancement of MIGO and interfaces with legacy system.
    Please have a look on attachment for SAP screen issue.
    Regards
    Mohit Jaiswal

    Hi Mohit ,
    please check below link , you need to perform steps as given
    http://help.sap.com/saphelp_470/helpdata/en/4d/2b90b043ad11d189410000e829fbbd/content.htm
    also see the sales order subcontracting using the business addon
    http://help.sap.com/erp2005_ehp_04/helpdata/en/c7/2587b8dad94c52854ccd28015dceb0/frameset.htm

  • Inter company stock transfer process

    Dear all,
    For example company code-A is sending the material to company code-B and it is sold by company code-B.
    As per the process given by SAP for inter company stock transfer we are creating a  Purchase Order ( PO type - NB) at company code-B.  based on this PO only company code -A will create a Delivery document and based on this delivery document company code B will do the MIGO and MIRO.
    for executing  this process  while creating PO at company code -B  we need to assign a Shipping Plant from which Company code-A  will send the material. So, for getting this shipping tab in PO, we need to assign the sending Plant code to the Vendor master ( company code-A is the  Vendor in  Company code-B) .As per SAP  for one vendor only one plant code can be assigned.But in our scenario material can be sent from several plants.
    So in this case how  we can assign those plants to one vendor so that the shipping tab will be available in the PO.
    Is it require to create that many vendors in this scenario or there may be any possible solution give by SAP to process this kind of scenarios.
    Regards,
    Abdul Jabbar

    Hi Abdul,
    we can assign those plants to one vendor so that the shipping tab will be available in the PO.
    In standard SAP it is not possible to add more than one plant to single vendor master(XK01).System allows you to add only on plant to vendor master.
    purchasing data->extras->add.purchasing data.
    For getting shipping point in PO
    1>STO can be configured
    2>shipping point determination can be configured in right manner.
    In Inter company STO,create vendor master for each and every plant. And use this vendor,whenever creating PO from receiving plant.Based on the vendor,shipping point will be determined in to PO.why because here we are creating receiving plant as vendor in supplying plant sales area.
    Regards,
    Gangadhar A.

Maybe you are looking for