Intrastat - building data - VEIAV

Hello,
how do I have to get or build the data for Intrastat reporting. We had data until 2005 but it's been empty for 2 years so I suppose there must be a report to build these data?
thanks

Hi David,
You can use Tcode ENGR to go to the Periodic Declarations Cockpit. Here you can "Create periodic declarations". Mind well that before you do so, you must check your config using the Settings Wizard. It will suggest the necessary changes required.
Revert if you still have any problems.
Regards
Keshav

Similar Messages

How to get last Build date of a dll in the real time target

Info On My Project
I am working on LabWindows CVI 12.0 for development . This project is a real time application for hardware, which is having Phar Lap ETS as RTOS...
I am facing some problems while checking Build date of my Application file( .dll)
I have tried to use GetFileDate API. But it is not supporting for realtime Target..
So i have tried __DATE__ macro.. That also having some problems..
How to get last Build date of a dll from the real time target ??
Please Help to solve this....
Thanks
Vaishakh A K

Please reply if any one have suggestion...

SPORXY Integration Builder data not understood

Hello everybody,
I want to connect a 6.20 System to our XI 7.0 (SP13). The Integration Engine in the 6.20 is maintained correctly (Application System, Destination works), the sldcheck works fine.
I use the table SPROXSET instead of the exchangeprofile. The profile is empty, the SPROXSET has an valid entry (IFR_ADDRESS: http://systemDNSName:57000/rep).
The SPROX_CHECK_HTTP_COMMUNICATION says: HTTP communication functioning
But the test =>Check with report SPROX_CHECK_IFR_RESPONSE and ==>Check with report SPROX_CHECK_IFR_CONNECTION both show the failure: Integration Builder data not understood
Normally I connect 6.40 Systems to the XI, they work without a problem. Is there something special with 6.20 Systems?
Regards,
Thomas
Edited by: Thomas Weinschenk on Apr 1, 2008 10:04 AM

The Add-On is isntalled.
I found out something else. When I try the Connection Test No.3 - SPROX_CHECK_IFR_RESPONSE (in the SPROXY), the IE opens the following Url:
http://myHost:57000/rep/ifraccess?service=query&type=namespace
and I get a HTTP 404 Error. What is the correct Adress here?
Regards,
Thomas
Edited by: Thomas Weinschenk on Apr 4, 2008 4:49 PM

Integration Builder data not understood - Problem

Hi all,
i have a problem with XI.
I want to generate Proxies from XI Content in a SAP System.
in SPROXY i can't see any data from the repository.
SLDCHECK runs successfully.
If i run SPROX_CHECK_IFR_CONNECTION i get the failure message "Integration Builder data not understood". I have already changed all passwords for the service users in XI and Exchange Profile.
can you give me a hint what the problem could be ?
br,
martin

Hi martin,
Make sure your business system is set up as follows:
1. Transaction SXMB_ADM
- Role of System: Application System
- Corresponding Integration Server:
dest://<your_sm59_http_destination>
2. Ensure that the RFC destinations LCRSAPRFC and SAPSLDAPI are
maintained and working
3. Run SLDCHECK to verify that the connection to the System Landscape
Directory works.
4. Check that the Integration Repository is running and data is maintained there.
check out the 18th page of this link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bd5950ff-0701-0010-a5bc-86d45fd52283
Message was edited by:
MANIKANDAN subash chandran
Message was edited by:
MANIKANDAN subash chandran

Photoshop CS6 Release Build Date Implies Beta Preferences Valid

Interestingly, it looks like the released code is closely related to the beta code... Build date and time of the released files are March 15, 2012 at 3:22 am (someone was burning the midnight oil).
I guess that says they didn't feel anything was too terribly wrong with the beta version.
I only mention this because it seems to mean that retaining the preferences, workspace, et. al., that we have set up during the testing of the CS6 beta version will still be perfectly valid.
Normally I would advise to delete preferences during the uninstall of the beta and recreate everything, but (unless one of the Adobe folks chimes in here and says otherwise) I'd say it's likely to be okay to keep them. That would be kind of nice not to have to re-setup Photoshop CS6.
-Noel

Well, given that Photoshop CS6 strives to port preferences from older versions, one might think that it might have been an Adobe design goal to try not to leave the folks who tried the public out in the cold by making them go through the process of setting up CS6 twice.
I am a little surprised Adobe did not rebuild the software before release per some of the beta feedback, since some of the bugs reported seemed pretty serious (thinking, for example, of the one where under some condition it can corrupt text in a PSD file so that it's uneditable)... Clearly they place a LOT of emphasis on their system testing, and apparently no bug was considered a "show stopper".
But I imagine they're working hard to get an update out. Also they must be planning to update Camera Raw to 7.1 soon, to bring back Camera support already in 6.7.
-Noel

WQL Query for OS Build date

Any WQL Query to retrieve data based on Operating System Build date.

Hi,
Please try the following query.
select * from SMS_R_System
inner join SMS_G_System_OPERATING_SYSTEM on SMS_G_System_OPERATING_SYSTEM.ResourceId = SMS_R_System.ResourceId
where SMS_G_System_OPERATING_SYSTEM.InstallDate < "4/3/2014 7:51:49 PM"
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

API for getting the build date of development components

Hello ,
we are changing the format of the <about> screen of our application. We show the version of the main development components that are the part of our application.
For the version date of the development components, we were earlier showing the deployment date. However we now plan to change it to their build date. We need to know if there is any API to find the build date of the development components.
Thanks alot in advance for helping!

Hi do you want all the dates from the back date to sysdate or only the particular back date
SQL> select sysdate from dual;
SYSDATE
22-JUN-09
SQL> select sysdate-10 from dual;
SYSDATE-1
12-JUN-09or if you want all the back dates starting from one particular then
SQL> select sysdate-10+level from dual
2 connect by level<=10;
SYSDATE-1
13-JUN-09
14-JUN-09
15-JUN-09
16-JUN-09
17-JUN-09
18-JUN-09
19-JUN-09
20-JUN-09
21-JUN-09
22-JUN-09
10 rows selected.Edited by: oracle_for_dude on Jun 22, 2009 12:11 PM

How to get build date of a development component?

Hello ,
we are changing the format of the login screen of our application. We show the version of the main development components that are the part of our application.
For the version date of the development components, earlier showing the deployment date. However we now requirment to change it to their build date. I need to know if there is any API to find the build date of the development components?
I really appreciate your help in advance!!

Hi Sandip,
The creatin date is overwritten in the same field E070-AS4DATE along with time E070-AS4TIME and E070-TRSTATUS in table E070.
Hope this helps
Thanks
Lakshman

Establish the Build date of an eMac

Can someone help me.
I need to establish the build date of an eMac. I know that in older iMacs by interrogating the system profiler a build date and time showed up. But I have an eMac running the latest Tiger and of course the profiler tells me everything but that.
I feel sure I'm missing something obvious but cannot spot it.
Thanks in advance.
Iain Mundell
iMac 1.9GHz Power PC G5 / 512MB RAM Mac OS X (10.4.6) iMac 500MHz G3 c/w 1GB SDRAM /Compaq Intel 1.3MHz/1.29 GHz, 512MB /iPod 60 GB

Using your fingernail, gently open the cover for the CD/DVD tray.
Inside is a label with your eMac's serial number.
Mine for example starts with:
YM430...
The first 2 letters tell you the factory in which it was built (YM is China I believe, G8 is USA)
The next number tells you the year - 4, as in '04 - and the next 2 numbers - "30" in my case - means the 30th week.
So, mine was built in the last week of July, 2004.
Hope this helps.

Automatically Including Build Date

We have some LabVIEW code that is built into an .exe/installer and it has an indicator that shows the date it was built and the revision number for that build. Currently, we have to manually set the date and revision number each time we build the program. I don't think the way we do our revision scheme can be automated with LabVIEW during the build of the installer or .exe file. However, it seems like there should be a way to incorporate the build date into my code from the build process. Is there such a thing? If not, does anyone have any suggestions for automatically including a build date into the LabVIEW code so that I do not have to remember to do this manually each time?
Thanks in advance.

I can't remember where I found these, so I cannot give due credit, but these VIs will give file info. If you point these to your exe file then you can get the file version etc.
EDIT: If you leave the path blank, then it follows the call chain to the app. In development this will point to LabVIEW, but in a compiled exe it will be your app.
Message Edited by yenknip on 02-03-2009 01:07 PM
- Cheers, Ed
Attachments:
GetFileVersionInfo 7.zip ‏108 KB

Step-by-step tutorial for building data model

Hello,
I'm looking for a step-by-step tutorial, which will build data model in BW (data sources, transformations, cubes). So far I found only one: http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4096b8fc-6be7-2a10-618e-b02a5e5e798f
May someone knows other tutorials?

http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/4096b8fc-6be7-2a10-618e-b02a5e5e798f
Regards,
Sushant

Class file build date printout

I want the class file build date printed out when I run one of my servlets, using the log(...) method. How can I retrieve the servlet class file build date so that I can log it when the servlet starts up please?
Thanks a lot!
Charl

Hi everybody!
I've got a problem like this. I've got some file which can be modified and i want the date where the file was created not the date where it was modified. How i can do this ?
thanks for the reply.
Excuse-me, my english isn't perfect

MS Report Builder Data Source Missing

Hi,
Simply, when I log onto my server with a local or domain admin and open report Builder, I right click
on Data Sources and choose add. I choose the one (only one) in the list and test (successfully) the connection.
However, no other users see the Data source and trying to create one fails. They are local administrators. They have been added as admins in SQL and the DBs. I have rechecked all the permissions and the user has full admin rights to the server, SQL and DBs.

Hi Analog-Kid,
According to your description, when users click “Edit in Report Builder” on report server to launch click-once report builder, if users want to add a shared data source, they can’t see the shared data source list which resides on the report server, right?
In your scenario, please check if those users could access the Data Sources folder on the report server. If not, please grant users permission to access this folder with Content Manager role on Security page. Also please connect to report server instance
from SSMS, then check if Manage data sources has been selected.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

In XML form builder data schema not clickable

Hi ,
I have installed JRE version 1.6.0_07. When i click on xml foms builder ,it gets opened but when i click on data schema it's not clickable but icon is displayed next to data schema.I am not able to create any node in data schema.
Regards.
Adity.

Hi,
my problem is simular to Aditys: My Java Version is JRE 1.6.0_15. When I go to Content Managment --> Formbuilder, the XML Forms Builder starts automatically but it is not possible to open Data Schema. After downgrade to Java 1.4 I can not start the Form Builder, that means, after clicking on "Form Builder" in the Portal, a pop-up opens, but the XML Form Builder does not load.
Can you help me?
Jannis

Flash Builder Data problem - mysqli_stmt_bind_param ?

Hi All.. hope someone can help.
I've started a very simple application and experiencing a problem regarding creating a new record in a MySQL database via PHP & Zend.
Here's the snippet of AS:
          newLine.buy_price = cursor.current.buy;
          newLine.sell_price = cursor.current.sell;
          linesService.createLines(newLine);
          createLineResult.token = linesService.commit();
Here's the snippet of PHP (all generated by FB):
     public function createLines($item) {
          $stmt = mysqli_prepare($this->connection, "INSERT INTO $this->tablename (supplier, sku, product_name, quantity, buy_price, sell_price) VALUES (?, ?, ?, ?, ?, ?)");
          $this->throwExceptionOnError();
          mysqli_stmt_bind_param($stmt, 'iisiii', $item->supplier, $item->sku, $item->product_name, $item->quantity, $item->buy_price, $item->sell_price);
          $this->throwExceptionOnError();
          mysqli_stmt_execute($stmt);
          $this->throwExceptionOnError();
          $autoid = mysqli_stmt_insert_id($stmt);
          mysqli_stmt_free_result($stmt);
          mysqli_close($this->connection);
          return $autoid;
When I run the createLines() function then commit(), I get the following error popup from my application:
MySQL Error - 1064: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'lines (supplier, sku, product_name, quantity, buy_price, sell_price) VALUES (?, ' at line 1
#0 C:\wamp\www\XOM-debug\services\LinesService.php(119): LinesService->throwExceptionOnError()
#1 [internal function]: LinesService->createLines(Object(stdClass))
#2 [internal function]: ReflectionMethod->invokeArgs(Object(LinesService), Array)
#3 C:\wamp\www\ZendFramework\library\Zend\Server\Reflection\Function\Abstract.php(380): call_user_func_array(Array, Array)
#4 C:\wamp\www\ZendFramework\library\Zend\Amf\Server.php(359): Zend_Server_Reflection_Function_Abstract->__call('invokeArgs', Array)
#5 C:\wamp\www\ZendFramework\library\Zend\Amf\Server.php(359): Zend_Server_Reflection_Method->invokeArgs(Object(LinesService), Array)
#6 C:\wamp\www\ZendFramework\library\Zend\Amf\Server.php(553): Zend_Amf_Server->_dispatch('createLines', Array, 'LinesService')
#7 C:\wamp\www\ZendFramework\library\Zend\Amf\Server.php(629): Zend_Amf_Server->_handle(Object(Zend_Amf_Request_Http))
#8 C:\wamp\www\XOM-debug\gateway.php(69): Zend_Amf_Server->handle()
#9 {main}
As as I see it, the parameters are not being replaced by the actual values, so MySQL is freaking out as it's getting question marks in the statements. What I don't understand is how this is happening! Everything is auto-generated by FB. I created a new project from scratch and used only drag & drop from the Data/Services panel to generate a form for data entry and got the same error.
Any ideas!?
Cheers,
Steve

Hi,
Thanks for your feedback!
This feature has been going through a lot of changes with the BlazeDS and Flash Builder builds.
We request you to pick up the BETA2 build of Flash Builder and BlazeDS 4.0.0.10654, hopefully you should see things working fine.
Kindly let us know if you still encounter problems.
Thanks,
Balaji
http://balajisridhar.wordpress.com

Intrastat - building data - VEIAV

Similar Messages

Maybe you are looking for