Intrastat Data in PO from SRM

Hi,
We are on SRM 3.0 (BBPCRM 4.0) SP11.
Currently we have intrastat requirements wherein when the intrastat conditions are met the PO should contain the intrastat data (commodity code, country of origin etc.) which will be picked up from R/3 Material master for the material-plant combination in te foreign trade-import tab.
This is happening quite right when we create PO from R/3, but when the PO gets created from SRM, the data is not populated. Even though the config and data is in R/3 side, why is the import tab of the PO coming empty when we create the PO from SRM?
Can anyone give me an idea on this?
Thanks,
Srivatsan

Hi,
   You can use the enhancement "SAPLMEWP" (EXIT_SAPLMEWP_002) in R/3 for populating the FOREIGN TRADE IMPORT DATA (in the structure PO_ITEM_ADD_DATA) in the PO created thorugh  the BAPI "BAPI_PO_CREATE".
  You can distinguish the SRM PO's on basis of doc type(DOC_TYPE).
HTH.
BR,
Disha.
Pls reward points for useful answers.

Similar Messages

  • How to extract data from SRM to BW?

    am a sap bw person. am given few fields...in SRM--CCM-Shopping...like service,product and material. they asked me to extract that data into BW.how to see those fields in SRM and how to check whether they are ready for extraction into BW...can u tell me step by step?

    Hi,
    Take a look at the thread [here|Procedure for standard data source extraction from SRM to BW 3.5.;, please always perform some searching in SDN before opening a thread as the question may already have been posed before.
    Regards,
    Jason

  • Data transfers from SRM to R/3

    Hi,
    i have follwing questions?
    1. How date transfer from SRM to R/3?
    2. Why PO transfer throught RFC? why not IDoc? and why confirmation and invoices are transfer using IDOC?.
    3. config document for EBP-SUS?
    Thanks
    Rams

    Hi Rams,
    The data transfers between SRM using ALE (Application Link Enabling) via RFC & IDOCs...
    P.O is transferred to R/3 using RFC. Confirmation and invoice through IDOCs.
    Since P.O is the leading document and of course legal document, there should not be any duplication. Means if it generates two P.O numbers one in SRM & the other in R/3 they are considered as two different P.Os.And will be an issue during audit.
    Where as confirmation and invoice posting documents are internal documents and the docs created in the back end with the back end number range. In this case same number is not mandatory.
    Hope this makes you more clear.
    Award points for helpful answers.
    Rgds,
    Teja

  • Vendor data transfer from SRM to R/3.

    Hi,
    I create a Business partner in SRM, I need to transfer it to R/3 ????
    Pls advice how to transfer the same.
    regds
    pavan.

    Hi,
    Pls see the foll thread for solution/workarounds:
    Re: Self registered Bidders to be transferred to ECC
    Other related threads:
    Tranfer vendor data from SRM to ERP (R3 / ECC)
    Vendor replication from  SRM to R/3?
    External Vendor replication from SRM to R/3
    https://forums.sdn.sap.com/click.jspa?searchID=571462&messageID=1487382
    Replication of Vendor master from SRM to backend.
    BR,
    Disha.

  • Function Module to send Vendor Master Data from SRM to ECC

    Hi Guys
    I heard there is a function module in SRM which can send Vendor Master Data from SRM to ECC please confirm for me if there is such a function Module and what is it called. Thanks

    Hi,
    Vendor Master data is replicated to SRM from ECC. Standard Transactions (BBPGETVD,..) will be used to replicate the data from ECC.
    Vendor Master will exists in ECC, so there is no point in sending the same back from SRM to ECC. If the requirement is the other way around, we can use the transaction BBPGETVD in SRM system.
    Hope this helps.
    Regards,
    Hemanth

  • Purchase order Confirmation data from SRM to MM

    Hi,
    I am trying to send Purchase order Confirmation data from SRM to MM via PI. In SRM portal i am able to see that the data has been send successfully. But i am not able to receive any data in PI nor iam able to any messages going from  SRM in SXMB_MONI.
    Please help me.
    Thanks & Regards
    Kasturika Phukan

    Hi,
      In SRM check in sxmb_moni is there any queue is blocked.
      If not then,
      Check your proxy settings.Select Go To and check connection Test.
      Go to sm59 and check H type RFC destination is maintained.
      Go to sxmb_adm check the Global setting value,
      Application system,dest://RFC destination is maintained.
      In XI,
      Go to SLD.
      Check Technical system (client with logical system) maintained.
      Check Business System maintained with role of application system,Related integration engine
      maintained.
    Regards,
    Prakasu.M

  • Transferring Product Data from SRM 7.0 to SRM-MDM 3.0

    Dear SRM-MDM experts,
    We are running the program BBP_CCM_TRANSFER_CATALOG to transfer product data from SRM 7 to SRM-MDM 3.0  The question we have is after running the program, where do we find the file the XML file which the program has generated so we can see the results?  SLG1 just shows how many products were processed.  We need to see the list of the products generated.
    Thanks and regards
    Pedzi

    Hi Pedzi,
    You can find the generated XML file in MDM server. Here is the path to get the Product Data XML file.
    C:/usr/sap/SRD\MDS00/mdm/distributions/MDD_ORCL/REPOSITORYNAME/Inbound/SRM/_MDMProductDataTransmission/Archive
    Thanks,
    Anshuk Saxena

  • Posting date filed not available to modify in invoices from SRM

    Hi there.
    When we try to create an invoice from SRM ITS, the field posting date it is as displayed field, we can not populate it with another date. The value of this field is always the actual date.
    Is it possible to activate this field in order to modify the content?
    Thanks and regards.
    Raúl.

    Hi All-
    Though this is claimed to be standard in SRM 5.0 in the release notes, the Posting Date field is not displayed in the SRM Invoice Basic data screens or is not editable rather. We had the same issue and SAP created an OSS note for us.
    The OSS Note number is OSS note 1082248.
    Pls assign points for usefull answers !!
    Sundeep

  • Product Contract and supplier data transfer from SRM to SAP XI

    Dear MDM Guru's
    I want to transfer product data from SRM system to SRM MDM catalog by executing the transaction BBP_CCM_TRANSFER. But not found any materials  or blog or articles on configuration and integration steps between SAP SRM and SAP XI.
    Need a same information on SRMMDM_CTR_TRANSFER - For contract data, Suppliers data.
    Please help.
    Regards
    Jacob

    HI Jacob,
    I believe below documents will give you the information which you are looking.
    [SRM-MDM Catalog Setup - Ready Reference|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/806f3d56-0d29-2d10-9abf-c0df6f0fdfe8]
    [SAP NetWeaver Master Data Management - SRM Catalog: Configuration for SAP NetWeaver Exchange Infrastructure - Ready Reference|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/601d4fee-719f-2910-4f86-fa030ab07358]
    [SAP NetWeaver Master Data Management - SRM Catalog: SRM - EBP Configuration|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/10d1bde2-699f-2910-8e86-f46bfe045fdc]
    Please revert if you still get any question, after going though these documents..
    - Shiv

  • Price Information data from SRm to MDM

    Hello,
    I m working on SRM-MDM Catalog 2 scenario.
    I have imported lookup table data in MDM using MDMGX transaction.
    But i couldnt get data for Price Lookup Qualified Table.
    Can anybody please tell me how should i send Price Information data from SRM?
    Thanks,
    Maheshwari

    Hi,
    By MDMGX, you replicate only the lookup table data.if you want to see which kind of look uptable data it replicate, you can refer the FS Guide/Config Guide of SRM-MDM.
    when you replicate the main table data from SRm to MDM via XI then you will get all those info related to price in the Qualified lookup table.
    Hope this will help you.
    TNR,
    saurabh...

  • Data from SRM to ECC for IDoc Creation

    Hi,
    Please help me for below requirement.
    PO and Changed PO details are coming from SRM-IBX server to XI and then IDOcs is getting generated in ECC.
    We are sure that we are not missing any data in XI that is coming from IBX server. But most of the time customer is saying that they are not having some POs in ECC.
    We approached IBX team for confirmation that, are they missing to push some of the data to XI. They confirmed us that, they are processing every thing from there end.
    Please advice me how can i confirm that what ever data IBX is processing to XI, it is successful reaching.
    I am thinking that if 100 PO is getting processed from IBX then we are getting only 80 or 90(Our assumption).
    Please advice.
    Ritesh.

    Please advice for the requirement.
    Plan 1 - We are thinking to get Log file from both server to analyse Sent data from IBX and received Data in XI.
    Plan 2 - To create a interface for receiving Log details from IBX to XI
    Plan 1 seems more analysis kind of work which again depends upon comfort of sharing data in the required format by IBX.
    Plan 2 have some data challenge.
    Please do advice me for the same or something good above this.
    Regards,
    Ritesh

  • Data not getting transffered from SRM system to BW

    Hi All,
    We have an issue where in the data is not getting transferred from SRM to BW. If i see in RSA 3 of SRM system, the datasource is pulling around 3000 records and in WE02, the idoc is generated and passed without any errors.
    Whereas in BW the idoc is coming with code 8 and no data is getting transferred to BW.
    What can be the probable reasons for this mismatch ??
    Thanks
    Abhi

    Hi Abhi,
    After an upgrade, i would go for following checks
    1. Check the Data Source on CRM side and check if it is Active.
    2. With Upgrade, usually DataSources become inactive and also, pls check if any required fields are hidden in the data source before you activate.
    3. After unhiding required fields, i would activate the Data Source and Replicate the Data Source on BI Side.
    4. Now I would delete the failed request by forcing its status to RED in RSMO and then go for the load.
    Let me know if it worked.

  • Transfer additional data together with a contract from srm to srm-mdm

    Hi All,
    I have a requirement to transfer additional data together with a contract, such as price scales, discounts, and discount scales
    If the contract has condition like
    scale Discount
    0-10 20%
    20-30 30%
    from SRM to SRM MDM Catalog.
    As a standard practice, we use report SRMMDM_CTR_TRANSFER in SRM to send the standard Contracts from SAP SRM system to the SRM-MDM Catalog repository via SAP XI.
    But to transfer additional data , we have to use BBP_SAPXML1_OUT_BADI in SRM 7.0.
    If any body worked on the same, please let me know the step by step procedure how to implement BBP_SAPXML1_OUT_BADI.
    Regards,
    Venkat

    Hi Venkat,
       You can have a look at the Note - 1296876
    It gives the step - by -step procedure on what how to Enhance Contract Data Transfer.
    For this, you may have to do the implementation in BADI BBP_SAPXML1_OUT_BADI
    Change the XI mappings and the MDM Import manager mappings.
    Hope this helps.
    Regard,
    Sherfu

  • Transfer of Product Master and Contract data from SRM server to CAT

    Hi,
    We are using XI system to send product master data from SRM system to CAT (catalogue authorising tool) wherein both the SRM and the CAT add-on have been installed on the same web application server.
    On the SRM-> XI part, we are going to use ABAP client proxy. My question is can we use ABAP server proxy to send data from XI to CAT ? In other words, is CAT a part of ABAP system so that we can use proxy ?? 
    I am new to SAP environment and hence this question.
    Regards
    Ramesh

    Hello Ramesh,
           for uploading SRM master data to CCM u need not do any developements in ABAP , u have to just import SAP predefined SWCV's in Integration repository and configure required scenario "MasterDataInclusionInCatalogOnWAS" for u r corresponding WAS version.
          U can download configuration document from service marketplace named " Configuration Fact Book CCM 2.0 "
    Regards,
    Keith

  • Migration of Transaction Data from SRM 4.0 to SRM 7.0

    Hi
    We are upgrading from SRM 4.0 to SRM7.0.
    In our old release, many Shopping Cart woul be in the status of Approved, Awaiting Approval and Held. When the same data is migrated to the SRM 7.0 Productive system, how should we take care of the same. We would continue to use the Old Workflow (Application controlled) in SRM 7.0. However we have made changes to the Workflow steps in the new system.
    Alo while moving to the new SRM 7.0 Production system, how should we manage the Transactonal Data migration overall.
    The client has not agreed to close the Open SC, PO or the confirmations.
    Any inputs relating to the Transactional data approach would be highly appreciated.
    Regards
    Raj

    Hi Masa
    All said and done we have lot of issues with regard to the data migration. The issues are as below:
    1. The POWL doesn't reflect the old data at all in the Upgraded system. I was expecting the "Check Status" functionality to be integrated with POWL so that all the existing Shopping Cart and Purchaser Orders could be seen and the follow on actions could be taken.
    2. I am not able to do a generic search on "Advanced Search". For example if I try to Search on the old Shopping Carts, until and unless I give the specific Shopping Cart number, the Search doesn't yield any output.
    3. Since POWL doesn't reflect the exisitng Shopping Cart we are not able to proceed ahead with them to create the Follow On documents like Confirmation.
    4. The Work Flow in the new system remains Application Controlled only. However we have added few extra steps. The existing "Awaiting Approval" Shopping Carts is not picking up the workflow correctly in the new system.
    Any ideas about the same?
    Regards
    Raj

Maybe you are looking for