INTRASTAT / EXTRA - Credit memo not relevant for declaration

Hi all,
I have this problem with INTRASTAT declaration:
Transaction VE08 mark credit memo as not relevant for declaration with this description "No association to a goods movement was found".
Do you have any solutions?

Hello,
check VE80, if you have an exclusion indicator on the item category.
If not try to run VE01 for your country and mark only credit memos. Use log type B. Check the message in the incompletion log. If your credit memos are not in the incompletion log, than run the transaction transaction VE08 you run before again. The credit memos should show up, otheriwse let me know what is the message in the incompletion log.
Check also if you need to show credit memo from legal point. From my point of view it should show only data related to deliveries.
Try and reply.
Edited by: SAPSD1000 on May 25, 2009 6:03 PM

Similar Messages

  • Credit memo not generated for RMA Receipt

    Hi,
    i created RMA receipt but for this credit memo not generated in AR, Manually i have run the Workflow Background Process  & Receiving transaction processor concurrent also. even though CM not generated(In AR Interface lines table also data is not available)..or else is there any possibility for cancel or return the RMA Receipt quantity?
    regards
    Balaji
    Edited by: user9122706 on May 15, 2012 9:22 PM
    Edited by: user9122706 on May 15, 2012 9:51 PM

    Dear Balaji,
    Credit memo not generated for RMA Receipt,Can u put manual credit in AR
    Regards,
    Shineee..

  • Creation of Billing Document - Item is not relevant for billing

    Hi
    While trying to Create a Billing document after entering the Order No.the following error msg shown in the Tool Bar
    No Billing Documents were generated. See log
    The Error Log shows the following msg with Yellow coloured indication :
    000000xxxxxx 00010 The item is not relevant for billing.
    Technical Data
    The Technical Data shows the Client
    Group Number
    Sales Document Number
    Item Number of the SD Document
    Schedule Line Number
    Counter in control Tables
    Message in Identification VF
    System Message Number 044
    We need to issue the credit note.
    How to solve this issue?
    If any one knows pls guide me.
    Govind Bhaskaran

    Hi
    Thanks for all of your guidance.
    I checked with existing Sale Order and compare with this S.Order.   I found the following:
    Reason for rejection column selected by "XXXXXXXXXX" - for Curren Sales Order
    Reason for rejection column emply - for existing Sales Order
    I removed the contents and kept it blank.   Then we can create billing document as well
    Cr. Memo without any problems.   Document posted.
    Thanks for your valuable suggestions to get some idea.
    Regards,
    G Bhas

  • Error - Creation of Billing Document - Item is not relevant for billing

    Hi
    While trying to Create a Billing document after entering the Order No.the following error msg shown in the Tool Bar
    No Billing Documents were generated. See log
    The Error Log shows the following msg with Yellow coloured indication :
    000000xxxxxx 00010  The item is not relevant for billing.
    Technical Data
    The Technical Data shows the Client
    Group Number
    Sales Document Number
    Item Number of the SD Document
    Schedule Line Number
    Counter in control Tables
    Message in Identification                        VF
    System Message Number                       044
    We need to issue the credit note. 
    How to solve this issue?
    If any onw knows pls guide me.
    Regards,
    G. BHASKARAN

    Hi friends,
    I checked with existing Sale Order and compare with this S.Order.   I found the following:
    Reason for rejection column selected by "XXXXXXXXXX" - for Curren Sales Order
    Reason for rejection column emply - for existing Sales Order
    I removed the contents and kept it blank.   Then we can create billing document as well
    Cr. Memo without any problems.   Document posted.
    Thanks for your valuable suggestions and guidance to get some idea.
    Regards,
    G Bhas

  • Credit memo not saving

    Hi all,
            I have a customer who is trying to save a couple credit memo and when she clicks on execute it highlights the quantity field and doesn't save. The credit memo is working for other invoices in the same area. The customer is using SAP B1 2005 Pl 45. Any suggestions would be appreciated. Thanks!
    Jeff Haldeman
    Support One

    Gordon,
    Believing it is AR Credit Memo we are talking about it increases the quantity on stock and not reduce..
    Suda

  • Item is not relevant for Billing-VF 044

    Hello Experts,
    I have the scenario where i am doing Return Process.Here i have done it through scratch as in set the copy control for LR to RE ,with item category REN.
    The entire process was running fine till Post Goods Reciept.
    But when i am billing the same it says:-- Item is not relevant for Billing
    I have done the following :-
    VOV7-REN-Check-Business Item
                       Check-Credit Active
    Billing Relavance--A
    Pricing-X
    Kindly guide where i am missing anything.
    Regards
    Swati Bhatt

    Hi,
    I assumed you have thoroughly checked all the configuration is complete it as suggested by other consultants.
    In addition to the above, you may want to check if your item category is relevant for POD.  If yes, and the POD is not completed, then it would not be possible to create billing document when it is not completed.
    You may also want to check in your delivery document overall status of the Delivery document: Go To --> Delivery Header --> Processing.  Check the overall status whether it has met all the required status and what other status has not been fulfilled that prevented the Billing doc creation.
    Ideally, the standard system would not have POD relevance for return item, but it may have been configured by other individuals.
    Hope the above helps.
    Thanks.

  • Credit management not updated for the first credit blocked order only

    Hi experts,
    Pls help to solve. Thx.
    Case: The first sales order is created against credit block because the credit limit is exceeded. In FD33, no credit data related to the first order indicates, i.e. credit limit used shows zero as well as sales value, credit exposure. In VKM1, the blocked order can be captured.
    As long as the second order is created, the credit management can be updated. But, it still does not capture the data from the first order.
    The sales orders I test have the same delivery date.
    Questions:
    1. Is the standard behavior for the dynamic credit check?
    2. If not, how to make credit management consider the first order data?
    PS. In OVA8, update 000012 is applied while horizon is 4 months.

    Hello Jonathan,
    After testing, I found credit management can consider the first order data if using 000018 only. Why 000012 cannot consider it?
    I have checked the explanation for those two update groups by F4. I feel obscure about the explanation of sales order between them (see below).
    000012:
    Sales order
    Increases open order value from delivery-relevant schedule lines
    000018:
    Sales order
    Increases open delivery value
    By the  way, my testing data as below:
    1. were the two sales orders of the same document type? Answer: yes. Same document type, same customer, same delivery date, etc.
    2. were the item categories the same? if not, was one not relevant for credit check? Answer: Yes, the same.
    3. did the documents have the same value? if the second order had a lower value and was not blocked for credit, the exposure will be updated. Answer: yes, credit management can consider the second order data ONLY. It seems the first order have not been created if checking credit management.

  • Line item not relevant for payment release

    Dear Expert,
    When I select payment block : 'Payment Request' in FB60. Error Message appear "Line item not relevant for payment release".
    I also have set payment block in master vendor and  OBB8.
    Can you tell me why the error message still appear?
    Kindly need your help
    Thanks and Regards,
    YL

    Do you have any workflow variant in place?
    Moreover, when you have already set the Payment block at Master level, you need not to fix it in transaction level.
    Vendor itself will not get paid until unless you remove the block option
    Thanks

  • Deliveries Showing as 'not relevant for billing' after Invoice Cancellation

    Hi,
    We have a plants abroad scenario, where the billing document (plants abroad invoice)  had to be cancelled because of wrong profit centres. After correction of data, when we are trying to invoice these deliveries, the system shows these as 'not relevant for billing'. Any idea what could have caused this and/ or how to correct this?
    Thanks in advance for the help,
    Regards,
    alok

    HI Alok,
    Could you please recheck the delivery document flow again, its only Billing document is cancelled or PGI reversal is also done or not.
    As per my knowledge G/L correction is nothing to do with 'not relevant for billing' or "relevant for billing".
    Try again there might be a case where delivery might have been reversed or billing document has not been cancelled or Document might have been blocked.
    Regards,
    Nagesh

  • Delivery 0080000276 is not relevant for transportation planning.

    At the time of (delivery related) invoice creation, system throws a message "check the error log".
    Log says:
    " Error Log             0080000276 000010 Delivery 0080000276 is not relevant for transportation planning
                LongText
                    Detail
                     Diagnosis
                         Copying control for billing requires that shipment costs
                         are copied from the shipment belonging to this delivery.
                         No shipment costs could be determined, because this
                         delivery is not relevant for transportation planning.
                     System Response
                         The system assumes that no shipment costs are to be billed
                         in this case.
                Technical data
                    Tech. data details
                     Client                                 251
                     Group Number
                     Sales Document Number                  0080000276
                     Item Number of the SD Document         000010
                     Schedule Line Number                   0306
                     Counter in Control Tables              00
                     Message Identification                 VY
                     System Message Number                  306
                     Output Type                            I
                     Message Variable 01                    0080000276
                     Message Variable 02
                     Message Variable 03
                     Message Variable 04
                     Group Type                             F "
    Please advice if anyone have any idea for this error log.

    Error Log 0080000276 000010 Delivery 0080000276 is
    not relevant for transportation planning
    It is not necessary to assign the Transportation Planning to Delivery type.  Only recently, I completed a similar configuration and running successfully for a client.  The issue is  because of your copy control VTFL.  For more information, check note 713171.
    thanks
    G. Lakshmipathi

  • Document is not relevant for billing

    Dear All,
    We are implementing ECC 6 in one of our client.
    Our client manufacturer of x finished product, they want monitor the production process through Project system and deliver should be through project system,
    We did the complete configuration from Production order till delivery in PS is working fine.
    But when we try to post billing document from the delivery document, the system is showing the following error,
    Document is not relevant for billing: LP is not relevant for F2.
    Our doubt is in this process, whether excise invoice will be generated or not?
    this LP is hard coded in SAP, We are unable to rectify the error,
    our GO-LIVE date is 1st March
    can any one help us to solve this issue?
    Thanks in advance
    regards
    Elango

    LP is not relevant for F2
    What is LP ??  Is it Delivery type or Item Category ??  Nevertheless, copy control is missing in VTFL.
    whether excise invoice will be generated or not?
    If physical material movement is there from a manufacturing plant to outside, then definitely, you should generate an excise invoice
    thanks
    G. Lakshmipathi

  • EXCISE GROUP H1 NOT RELEVENT FOR PLANTS IN PURCHAGE ORDER

    Dear All,
    While creating vendor excise invoice by Tcode: J1IEX it is throwing error AS MENTIONED BELOW,
    EXCISE GROUP H1 NOT RELEVENT FOR PLANTS IN PURCHAGE ORDER
    Kindly help in this matter.
    Regards
    AJIT K SINGH

    Hi
    Check the series group which your giving in J1iex.. Has it been assign to to Excise registration of Plant. And you have given us the Message number and application area. If it is a customized message then you need debug with Abaper.
    Regards
    Antony

  • Issue in creating Invoice when route is not relevant for shipment cost.

    Dear All,
    We are facing a problem while creating an Invoice. The route used in shipment in not relevant for shipment costing. Shipment type is relevant for costing. So in normal scenario if I don't remove the tick mark from "Shipment cost relanace" at shipment type and proceed with Invoicing I get error as " SHipment costing is not complete", which is correct. The scenario works well if item/s in delivery are not batch split.
    But, if items in delivery are batch split and "shipment cost relevance" check is not removed from shipment type then, only batch split items get copied in invoice. Header item is deleted and invoice gets saved, which should not happen.I don't get error in this scenario.
    How should I make the error in invocie work in case of batch split items also? Could anyone please let me know?
    Thanks!

    Dear Manmeet Mohan K,
    Can you please check the copy controls in between delivery document to invoice(VTFL)
    Thanks&Regards
    Raghu.k

  • Unit of measure conversion for CIN is not relevant for pricing

    During creation of Ad item type order, when we enter the planned ad size e.g. A CO (Columns) x B IN (Inches), the system is showing a message "Unit of measure conversion for CIN is not relevant for pricing" and pricing is not determined in the Billing Data Set. However if the planned ad size is maintained as A CO (Columns) x B MM (Millimeters), there is no impact to pricing conditions.
    Any light how to fix this issue?
    Thanks,
    Suseela. V

    Dear Suseela,
    You need to maintain Unit of conversion using transaction code JH51. You have to follow the path Logistics-Advertising Management-Master Data-Conditions-Order/Billing Document-UM for Pricing.
    Here you can maintain combination using Booking Unit, Content Component, Design type and assign Unit of Measure to get relevant pricing into billing set conditions.
    Hope it will help. Thanks!
    Regards
    Indra

  • Intercompany stock transfer - Item not relevant for billing

    Hi Experts,
    please can you help me in Intercompany stock transfer billing. I set up all customizing for Intercompany stock transfer, checking also with all OSS notes available.
    When I try to invoice Stock Transfer Delivery (created from Stock Transfer Purchase Order) with VF01, system issues the message "F044 The item is not relevant for billing".
    As per standard setting, billing relevance on Stock Transfer Delivery item category is "D".
    Thank you very much
    Kind Regards
    Andrea

    Check your copying control setting for Delv to Billing in VTFL (LF - IV)
    Header:
    Copying requirements - 014 - Hdr dlv.rel.IC bill.
    Item:
    Copying requirements - 015 - Itm dlv.rel.IC bill.
    Data VBRK/VBRP -  001- Inv.split (sample)
    Also, check for your I Cat that has billing indicator is active.
    Thanks & Regards
    JP

Maybe you are looking for

  • How to avoid the user selecting a different path in my installer

    Hello again all you helpful forum-goers! I have an application and a corresponding installer, and then I have a separate installer putting some support files in the same directory.  My problem is that if the user selects a different path to which to

  • What is the maximum size for a VI

    I am currently using 2009. My VI is 1.8 MB. I am having problems. Time to make a chang is 15 seconds. Sometimes saving a file won't work. I have tried increasing the swap file.I also have 2 GB of memory. I will be uploading to 2010. I keep adding to

  • Lexmark printer not working with os 10.6.8

    I Have a mac laptop that i recently upgraded to os 10.6.8. I have a lexmark prospect se pro 208 printer that worked wirelessly before the update. I upgraded the lexmark drivers to match 10.6.8 but now it will not print wirelessly or when connected wi

  • CRM_IC not working

    Hi to all, i am new to CRM IC WEB Client. i created IC WEB Profile when i tested web profile using se80 its working but when i use t.code crm_ic in was not displayng any thing it directly going to SAP easy acess menu. when i check the system status u

  • Large Flex App... questions..

    Hi, Here are my questions.... Thanks for your feedback.... What is the largest deployment of Flex that you know of? I need to scale Flex to 1 million users. Where does Flex break when pushing high volume through the server? How scalable is the Flash