Intrastat problem - export declaration

HI,
We have one business scenario in intrastat for traingular business process.
So we have three EU countries involved. End customer country is Austria, order received plant country is germany and delivering plant country is France.
But when they do the intrastat declaration, they want to do the declaration with France company code with germany country as declaration country for this movement even though the goods physically moved from country FR.
I have tried, it is not working. when i do the declaration system is allowing to do with DE with germany company code not with France company code.
What are special configuration for doing this declaration.
Any hint leading to a resolution is highly appreciated

Hello,
could you please let me know , how did you resolve the issue.
I also have a similar issue.
Thanks & Regards,
Rajeshwari

Similar Messages

  • Intrastat - export declaration

    HI,
    I have one intrastat business scenario: This process involves b/w three  countries:
    Step1: Germany sales org. (G100)(Comany code for germany: GA00)create orders from Austria customer.
    Step2: Delivery is made from plant 9000(France Plant) (Company code for france: FA00) directly to customers.
    Step3: Germany com.code is making a direct billing to Austrian customers
    Step4: Therefore there is an intercompany bIiling doc. IV from france com.code to German com.code.
    I have done aboove all steps, after i have done the export declaration with germany company code with country declaration DE. In this case system showing doc. in ENGR t.code.
    As per client requirement system should not show this document with these combinations.
    But client actually requirement is, they want to do the export declaration with france(FA00) com.code with country declaration DE for IV doc. with destination country AT by t-code ENGR
    But when i do the declaration with this combination system showing error message: Your selection is based on org.units that are not in the declaration country DE.
    Is there any special configuration settings for this in intrastat for traingular business scenario.
    This scenario is applicable for spain also.

    thanks to all

  • New export declaration after cancellation

    Hello,
    I've got the following problem and hopefully someone is possible to find a solution to the problem:
    An export declaration is build by an F2. Afterwards the declaration is cancelled on GTS side manually. The actual status in CUHD field PROST is 4B (cancelled). On refer to the same delivery a new F8 is build to create a new declaration but failed. It cannot be transfered to GTS (SM58 process is allready existing with... ). The previous declaration is successfully cancelled, what might be the problem? Is there any idea?
    Thanks in advance for any help!
    Astrid

    Hi Astrid,
    I took a look at the code...  The check works something like this:
    The system tries to find any existing Customs Documents having the Billing Document as a header reference.
    If any documents are found, they are checked for Status.  Any with status '4B' ("cancelled") are ignored.
    If any documents remain, the item-level references are considered.  If there are any matches, then the new transfer is rejected.  Otherwise, the transfer is allowed.
    I wonder; was the Export Declaration the only document created from the first transfer, or did the system perhaps also create a Transit Shipment?  If so, that too must be cancelled to allow the new transfer.
    Does that help?
    Regards,
    Dave

  • Problem exporting to gif

    Sorry for my English! I have a problem exporting to .GIF all the animation is in the Movie. Ascorroded Movie .GIF to see the layers. Help me

    Go to file and export for gif but it will not sure it retain all of them on the stage as a gif animations. becoz we have more contents like movieclips, nested animations and controls.

  • I am having problems exporting my time lapses from quick time pro i need to save my files as photo jpegs but the standard video compression window will not open fully,

    i am having problems exporting my time lapses from quick time pro i need to save my files as photo jpegs but the standard video compression window will not open fully, it just keeps my mac (old 1.6Ghz 2.5 GB sdram G5 still good for most stuff i need) spinning for ever but i can see compression type H.264 selected and the other setting but i can not select any other options as it still thinking but never opens! why is this happening how do i get round it?
    my work flow is: 300 images shot on a 5d mark II medium jpegs opened in Light Room cropped to 16:9 then exported and opened in quick time i can save a .mov H264 giving me files sizes of 14 mb for a 16 second time lapse, mp4 9 mb. the only way i can get large files is saving as a self contained movie then i get 300mb files.
    i need to save my files 1920 x 1080 photo jpeg codec as i want HD quality.
    i am sure there is a simple way round this?
    thanks guys!

    It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions. 
    How large is your hard drive and how much hard drive space do you have left? 

  • Credit Memo to Export Declaration

    Hi,
    For returns we use the billing document type of a credit memo, this is posing us a challenge when it's an export return becuase  GTS  programmed in filter logic that credit billing doc types will not get passed to compliance/customs management.
    Specific doc types being filtered are O – Credit Memo, 4 – Credit memo list, 6 – Intercompany credit memo,  S – Credit memo Cancelation.
    Anyone have expereice/guidance on how to integrate? 2 current options being evaluated are enhancing the logic to allow a credit memeo to create an export declaration or introducing the pro-forma.
    Thanks, Jeff

    Hi Jeff,
    Please explain why it would make sense to create an Export Declaration for a return - thanks.
    Regards,
    Dave

  • Hello everybody, is anybody else having problems exporting music to their iphone 4's from their itunes 10.6.1. (7)?

    hello everybody, is anybody else having problems exporting music to their iphone 4's from their itunes 10.6.1. (7)? i sure am. somehting is way differant. i used to be able to simply drag, and drop albums, artists, and entire genres to my phone without a worry. now i drag an album to my phone, and it will only add a couple of the songs. so i drag and drop again, and maybe even a third time to get all whole album on there. oh, and the album artwork is a no-show. i dont know what i'm missing. it's sure not what i'm used to. anyways, i'm new to this support community deal. thank you in advance for any help.
    much respect,
    tommy bravo

    After further testing, I noticed that iTunes not only becomes totally unresponsive but will start using all the CPU until I kill the process. After restarting, it works again for a while and then it dies again...
    Luis

  • Customs export declaration not getting created

    Hello everyone .. i need help of your expertise
    I am creating billing document on R/3 and we have made it such that the F2 document flows onto GTS and creates a Customs export declaration
    The issue here is i have created the billing docs but i cannot find them on GTS.
    I checked the value of the goods is not equal to zero
    Checked the SM58 to see of any RFC log is there at the time of document creation and time .
    checked SLg1 on GTS to see if any log , but no log is there .
    It is basically an export order from EU country to a non EU country
    and i checked the billing doc and it is export relevant
    The document is flagged to go into GTS in document control settings on R/3
    Plant , company code and everything is mapped.
    It is an intercompany customer transaction.
    When i try to pull up the CULOEX by using the reference doc # from feeder system its saying no documents found
    in test environment the billing doc is flowing onto GTS and creating CULOEX succesfully.
    The sales order and delivery docs basically passed the compliance test and they are good.
    Can someone suggest me where else i need to go and look at .
    your help is very much appreciated.
    thanks
    Bharad

    Hi Bharad,
    Could you let us know the current status of the issue? If it is resolved could you pls share us how you have done it as it is the most occurring issue and leaves no clue too? If not resolved, Could you check whether the Badi /SAPSLL/IF_EX_CTRL_SD0C_R3 is activated in R/3 or not?
    Regards,
    Shiva

  • Resolution problems exporting to DVD

    I am brand new to FCP 5 and everything I have learned has been within the past two weeks. I have read MANY posts on resolution settings, square pixels vs. retangular pixels, iDVD problems, exporting problems, etc. However I have not found an answer to my problem, but many helped.
    I am currently trying to project video from a DVD. The projection needs to be an EXACT size. After exporting and viewing with projection in QT Fullscreen, the video is exactly what I want.
    However, when I burn a DVD using iDVD and project it from a DVD player, the projection is slightly stretched horizontally. Why is that?
    The sequence is originally from HD and the export settings are -
    -Frame Size: 640x480 (4:3)
    -Pixel Aspect Ratio: 1440x1080
    -Exported using QT Conversion NO COMPRESSION
    (There are many other combinations of frame size and pixel aspect ratio's that also work initially, but they project with the same problem.)
    I had to have missed something.
    ANY suggestions are greatly appreciated.
    Eric
    Power MAC G5   Mac OS X (10.4.7)  

    The footage did come from an HDV from Sony.
    I use QT Conversion because if I export it as an QT Movie, the video is distorted. However, when exported through Quicktime conversion/quicktime movie/no compression, the movie is exported in the correct dimensions, though the DVD play back issue still persists.
    I am running off of iDVD v 5.0.1 and could not find a place where I could choose a 16:9 option, if that is what you meant.
    The sequence does include a PSD mask which was imported as a Layered Graphic Sequence. That shouldn't have any impact on the burning issue though.

  • PDF quality problems exporting from InDesign and Photoshop

    Hi There.
    I'm having big problems exporting my InDesign files to PDFs and retaining the res. And it's not just the images (I understand about the dpi) it's the type on there too.
    I have been exporting as the preset High Quality Print - is this wrong. Are there other settings to ensure the PDF I export retains the high-res quality and clarity?
    At the moment it comes out high-res when I export it as a jpeg or eps but not PDF.
    I have also noticed the same problem when I export to a PDF from Photoshop.
    I really need to create interactive and high quality print PDFs from my InDesign files.
    Please can you advise.
    Thanks
    Karen

    I am also having problems with pdfs exported from Illustrator and Indesign recently. I didn't have these problems before, so I don't kno if something has changed in my settings that I am unaware of.
    When I use the 'japanese dots' border in Indesign, it shows on the pdf as a kind of dotted line. I'm exporting as 'High Quality Print'. I switched to Illustrator and drew a line with the pen tool, and converted it to a dotted line; it looked just how I wanted in in Illustrator, but as soon as I exported it, the same thing happened.
    I have used the 'japanese dots' border in the past, exporting as 'High Quality Print', and not had this problem.
    Does anyone have any suggestions?

  • Problems Exporting to Excel in Acrobat XI

    I have some problems exporting a PDF to excel in Acrobat Std or Pro XI but not in Acrobat Std or Pro X.  When exporting in X all the columns and rows are created as they should be, but in XI everything is slammed to the left in one column.  Has anyone experienced anything like this and is there maybe a setting that I am missing in the conversion process that was automatic in X but is not in XI?
    Thanks in advance for the help.

    I am having a similar problem.  I used the 30 trial acrobat XI and it exports pdf to excel perfectly.  However, after buying and installing the program, the export is all messed up with data not in correct columns...etc.
    Acrobat tech controlled my computer and experimented a bit.  He said that my pdf was created by a 3rd party application called crystal reports and that acrobat doesn't work on about 50% of these 3rd party creations.  I said, then why does the trial work so well.  He said there is nothing different between the trial version and the actual purchased version.  This cannot be true or something else is up.  I told him I wanted to uninstall my purchased program and reinstall the trial version just to prove it to him.  He said it would not allow me to reinstall the Trial.
    After my phone call was over, I did it anyways.  It did let me reinstall the trial version.  I took 7 pdf sent to me from work from each server (wanted to make sure one of my servers was not sending different types of pdfs).  Each pdf did not convert successfully when I used my purchased version.  Then I uninstalled and reinstalled the trial version.  The trial version successfully exporting my pdf to excell (all 7 of them).  Something weird is going on.
    Any insight would be appreciated.

  • Problem Exporting / Importing print forms with program RSTXSCRP

    Hi!
    there is problem Exporting / Importing print forms with program RSTXSCRP.
    when I transfer print form from one SAP system to other, logo image and some text is missing... what could be the reason?
    Maybe there is other way to transfer print forms between SAP systems without using program RSTXSCRP?
    Will reward,
    Mindaugas

    Hi,
    when you transfer print forms from one sap system to another, logos are not transfered automatically. these are actually .bmp files which need to be existing in every client. then only when you run your print program logo can be seen in your print output. hence logos need to be created explicitly in every client where you want to run your print program.
    thanks,
    sksingh

  • Problem exporting using Compressor in FCP?

    I had a problem exporting using Compressor in FCP and then I found an interesting article from Apple:
    http://support.apple.com/kb/TS1099
    but it doesn't really explain the solution. What steps do I need to take exactly in Compressor to make it work?

    James M. has it right. Convert the MP3 and the WAV files to AIFF, 48khz, 16 bit and use those in your Sequence. You might even have to convert the existing AIFF file(s) if they aren't 48khz, 16 bit.
    Once you've edited the new files into your Sequence, do an Audio Mixdown, then export.
    -DH

  • Problem exporting uncompress AVI

    Problem exporting uncompress AVI. The output file will have in-between frames that appear like this:
    Help!

    Thanks for response! It's not the player's problem (it's mpc btw), I import it into Premiere for post editing and it's disaster to see the failed rendering.
    Mmm need time/Everest to find out the system info. Generally render setting is just straightforward AVI lossless/best quality with no codec assigned.

  • Customs Documents for Export Declaration - Output

    Hi ,
    i have created Billing document in R3, in GTS customs docuement generated for that billing doc.
    when  i am Executing the message under Communication View  giving error message "Cannot execute; message P0350 is incomplete"
    Could you please let me know which config i missed out.
    and also when i am check the message message throwing as "Executor/sender has not been maintained in customs document xxxxxxxxx" please let me know where i need to maintain the Sender"
    I want to see print preview on sereen for Certificate of Origin (US) for customs document for export declaration.
    please guide me on this.
    Regards
    Tarun

    Hi,
    You can first identify the incomplete schema assigned to the message (P0350).
    SPRO -> Global Trade Services -> SAP Customs Management -> General Settings -> Communication Processes -> Define Messages for Communications.
    Once you have find the incomplete schema, review the configurations to find which field is missing. From the error message, it might be the processor for the customs document.
    SPRO -> Global Trade Services -> SAP Customs Management -> General Settings -> Document Structure -> Control incompleteness checks in Customs Shipments and Customs Declarations
    Wen

Maybe you are looking for