Intrastat-Wizard: Production BOM

Intrastat-Wizard: Production BOM
If subordinate items do not have to be declared, they still have to be updated otherwise the error message 'data incomplete' appears.
We need the option to 'send' or 'not send' the subordinate items e.g  UDF -> relevant for Intrastatdeclaration: Yes/No

Production BOM and Costing BOM are one and the same,
If you have maked it as costing relevant then it is implied that the top level/ header material of the BOM will be costed based on the component inputs.
For Most of the cases Production BOM will be same as Costing BOM.
Production BOM:
This BOM contains items that are relevant to production. These items are copied to the planned order. Dependent requirements are generated for them, and they are copied to the production order.
Costing BOM:
This BOM contains items that are relevant to determining the material costs of a product.
When you calculate production costs using a quantity structure, the system automatically determines the BOM and all the BOM items that are relevant to costing, in order to calculate manufacturing costs.
http://help.sap.com/saphelp_46c/helpdata/en/cb/69ec6eb435d1118b3f0060b03ca329/frameset.htm
http://help.sap.com/saphelp_46c/helpdata/en/34/55c90c98482bc0e10000009b38f91f/frameset.htm
Hope the above helps you.

Similar Messages

  • Cost of Production BOM in Prodcution Order

    Hello Experts,
    Here is scenario that i need help :
    Assume that we have a Production BOM with two components with a price of $10 in the pirce list :
    Parent Item: A0001 ( Price of A0001 is $10)
    Components  : A0002,A0003   ( Price of A0002 is $0 and Price of A0003 is $10)
    When we create a prodcution order for A0001 with a quantity 1000 and close , i noticed that in the summary tab of Prodcution Order and noticed that Actual component cost : $10,000 and Actual cost : $0 and Total Variance : $10,000.
    Due to this there is variance in Prodcution Clearing Account. Could you please help me a right approach on how to enter correct cost for Production BOM.
    Any help will be appreicated.
    Thanks,
    Praneeth

    Resolved

  • Query related to selection of BOM (Production BOM or Sales Order BOM)

    Hello All
            Am having a scenario wherein the FG is having 5 components out of these 5, two are subassembly and 3 are raw materials, 3 of these components are customer specific i.e. 1 suby assly and 2 raw materials are customer order specific, now what i wanna know is that how shall i decide the BOM, will it be a Sales Order BOM or normal Production BOM. If i go for a Sales Order BOM, can any body tell me the processing of Sales order BOM. For the above FG the packing materials are also cutomer specific and that too is included in BOM. Any help in this regard shall be highly appreciated.
    Regards,
    J K Tharwani

    Thanks for your reply.
          I would like to know am using strategy 52 for this FG, so that i can have option to procure order specific components after sales order arrival, and components which are not specific to the order can be procured before sales order arrival. Where am confused is if am planning with FG1 i.e. am entering PIR for FG1 and am procuring order independent  components before sales order arrival and suppose if the sales order arrives for FG2 for which components i have procured before sales order arrival is same but the remaining components which are order specific are different from that of FG1, then how the MRP shall behave. How the requirement for the FG2 shall be met. Kindly throw some light on this scenario.
    Expecting a positive and prompt response.
    Regards,
    J K Tharwani

  • Sales Order - Purchase Order using Production BOM?

    Hi all,
    We are experimenting moving over from Sales BOMs to Production BOMs to allow us to use P&P Manager properly.
    One of the scenarios which is causing a problem is "back to back" ordering. At the moment, with our Sales BOMs, we can tick the "purchase orders" checkbox in the logistics tab, and generate Purchase Orders for our Sales Order (the system creates POs for all the child components in the Sales Order we choose).
    When we have tested this with a Production BOM, we cannot seem to find a way to get the system to do anything similar (plus in this case, I guess create the relevant work order(s)).
    Is there a way of achieving this?
    Thanks
    Raj

    Hi Suda,
    Thanks for your reply. After further thought, I realise that we will be unable to use the Production BOM and will have to stick to Sales BOM type for the forseeable future.
    Thanks,
    Raj

  • Patch 7303030  FAILED: file cst4274743.sql on worker  1 for product bom use

    Hello
    I'm a noob to the Oracle world, and are trying to update our system from 12.0.4 to 12.1.3 I got to the point of installing patch 7303030 and I keep get this FAILED: file cst4274743.sql on worker 1 for product bom username BOM. I have looked in the threads but have not found anything that has helped so far. I have tried restarting the worker but got the same result. can any one point me in some direct so i can complete my update in my test environment.
    Thanks

    Hello
    I'm a noob to the Oracle world, and are trying to update our system from 12.0.4 to 12.1.3 I got to the point of installing patch 7303030 and I keep get this FAILED: file cst4274743.sql on worker 1 for product bom username BOM. I have looked in the threads but have not found anything that has helped so far. I have tried restarting the worker but got the same result. can any one point me in some direct so i can complete my update in my test environment.
    Thanks

  • Production BOM and Engineering BOM

    Dear Gurus ,
                          I want to know difference between Eng BOM and Prod BOM . We have standard multilevel engineering BOM but if I use that BOM for routing assignment I can only see 1 st level components . Can I put all components in single level so that I can assign them in FG routing and pick list will have all the components ?
    We are thinking of considering all assy as phantom so that there would be only one prod order for FG .
    Neal

    Hi,
    The engineering BOM is as designed material BOM. It may include all the part upto the level of nuts & Bolts & also the engineering drawings. But in Production BOM you may not include the engg drawings & the C class material like nut & bolt, which may be planned on Reorder point planning.
    I hope the answer is clear.
    Regards,
    Prashant

  • Engineering BOM and production BOM-very critical help

    Hello All,
    I am working for a client and below is the requirement, please guide me.
    1) Customer has 2 department here one is engg and other is production as usual.
    2) He needs BOMs only for 2 purposes a) For R and D  b) Production.
    3) He needs any changes in engineering and production to be reflected from certain specified date.
    4) He says he will raise ECN for every change.
    Now my questions are:
    1) How to copy any changes done at later stages from engineering bom to production bom at specified date. Can ECN automatically do this?
    2) what are methods  to copy any fresh E bom to Production bom also?
    3) Can ECN once approved automatically update changes in BOM by itself or does customer cumpolsarily need to take ECN and manually change E bom and then P bom.
    Please suggest if any better model can help.
    Regards,
    satish

    Hello Adler,
    That was good response. Here any of both situations can appear. So can you help me in knowing the procedure how to do the same in both cases
    Also below are my pending queries, any one please help
    1) He needs any changes in engineering and production to be reflected from certain specified date as per date he mentions
    4) He says he will raise ECN for every change.
    Now my questions are:
    1) How to copy any changes done at later stages from engineering bom to production bom at specified date. Can ECN automatically do this?
    2) what are methods to copy any fresh E bom to Production bom also?
    3) Can ECN once approved automatically update changes in BOM by itself or does customer cumpolsarily need to take ECN and manually change E bom and then P bom.

  • To find Components final product BOM.

    Dear experts,
    I need to know final product form component, Where used list shows first level BOM material but I need final product which is sold to customer (Finished Product), not SUB assays.
    Thanks in Advance,
    Jayakumar.M

    HI,
    *LOADING FINISHED MATERIALS INTO AN INTERNAL TABLE
      select matnr
             mtart
        into table it_mara1
        from mara
        where matnr in so_matnr
          and mtart = 'FERT'. " For finished material
      if sy-subrc = 0.
        sort  it_mara1 by matnr.
      endif.
    For getting the BOM components use the function module.
    FM. CS_BOM_EXPL_MAT_V2
    Reply from malinis on 12/27/2002 5:24:00 AM
    The required fields for this function module are :
    Material
    Plant
    Date
    Application(CAPID)
    Values for CAPID can be found in table TC04
    For production BOM it is PP01 .
    The BOM sub components are stored in the Tables parameter of the above specified Function Module STB of type STPOX.
    Compare this parameter with it_mara1, using field IDNRK with those componemts existing in it_mara1( with matnr field of it_mara1).
    Hope this helps.
    Ram.

  • Semifinished product BoM

    Dear colleague,
              can anybody provide some clarification on the implication of the changes done below
    A semifinished product which was produced for a final product needs also to be sold seperatly as a service product and for this the service product bom needs to be created.
    can you please let me know the implication of creating a new bom for this service product.
    Thanks
    Sandeep

    Hi,
    I do not see any implications for the same.
    It should work the way a normal Semi-finished product with BOM would work.
    If you would like to sell the material, you would need to create Sales Org views for the material in ERP.
    Regards,
    Sandeep

  • Error when no production BOM exists for material in production order.

    Experts,
    I have materials with production BOM's and other materials without production BOM's.
    When I create a production order, I get an error message (not blocking) that I don't have production BOM.
    Can I configure my production order type in a way that a production BOM is optional?
    Many thanks!
    Jan

    Hi,
    Please cheeck with OPJB.
    SPRO-> Shop floor control->Sytem modfications-> Define sytem message attributes.
    As you can convert the meassages only defined here
    SPRO ( Production > Basic Data> BOM > General Data > Change Message Type .
    Or
    Goto SE91; press F4; select SAP Applications as PP and find all messages under it
    Regards,
    R.Brahmankar

  • Production BOM in Quotation

    Hi Guru's
    Can we make production related BOM to trigger in the Quotation?
    If so,Please let me know how to do it?
    For sales BOM, we'll use the T.code  CS01 and the BOM Usage will be  5: SD  But in order to trigger Production BOM , what has to be done.
    Regards
    Stephd

    dear friend,
    for production the usage to be '1'
    regards,

  • Effects of deleting a Production BOM?

    Hi SAP Guru's,
    Can anybody please tell me the effects of deleting a Production BOM? I want to create a new Production BOM in place of it.
    Thanks in advance,
    Ketan

    dear ketan,
    why do you want to delete the production BOM, it is not necessary to delete the BOM you can anytime define a new BOM and assign the materials to it.
    Hope solved your querry.
    Reward if useful
    njoy
    Ashish

  • Costing calculation using production bom

    Dear experts，
    In CK11n，under what circumstance， do we need to create costing bom？
    in order confirmation， plan cost is calculated from production bom or costing bom？
    actual cost is calculated from production bom or costing bom？
    Thanks

    Hi
    If your organization does not want to calculate Cost based on Prod BOM (Say you want to ignnore scrap in the Prod BOM), then create a Costing BOM and use it for Costing
    In an ideal world, both must be the same as far as possible
    br, Ajay M

  • Sales bom vs production bom

    hi
    not sure if this problem has a solution, but i just wanted to crosscheck.
    we have a number of items that was wrongly created to start with as production bom's when they should have been sales boms. we are forced to create production orders for them. i know that once we create an item as an inventory item, it cannot be changed anymore.
    is my only alternative to created a new item number for all of these items? can you think of any other way around this? a new part number is going to create a lot of headaches around!
    thanks
    prem

    Hi Prem,
    You understanding of once we create an item as an inventory item, it cannot be changed anymore is not completely true.  Only if you have transactions to tie them up, that will become true.  Suppose you have just made production orders for half of them, you can remove the other half to reduce your headache.
    In case of locked items with transaction, there are legal issues behind it. Even though it is by mistaken, you're not allowed to say I never done it.
    Thanks,
    Gordon

  • Costing for sales order BOM vs Production BOM

    Hi gurus,
    can some one please explain in clear how is costing different if we use sales order bom versus if we use production bom.
    Thx

    I Feel Your are asking about Sale order costing and Std cost estimate using production BOM
    IN sale order costing- You can use any BOM ( sale BOM or production BOM), IF you carried out costing in sale order level in Va01/Va02, system will read the BOM, routing for that material  & system will take the costing lot as sale order qty and carried out cost estimate, This cost estimate value will update In condition as EK02. & system will take this Ek02 price for production GR value, PGI value and the profit is calculated based on Ek02 not based on VPRS( std cost estimate)
    Production costing:
    System will take the costing lot size in material master costing view, System will read the BOM and routing for the material in Ck11n, And you need to mark and release in Ck24, this value will update as Std cost  price in material master, this value is atken for Goods movement for that material

Maybe you are looking for