Intrepid ValueCAN3 usb2 type device not supported on Macbook Pro 2012 with USB3

I cannot use an Intrepid CS ValueCAN3 with a USB2 interface on a Macbook Pro 2012, which has a USB3 interface.
I am running Windows 7 Pro, Service Pack 1, under BootCamp 4.0
I keep my Window 7 Pro updated with Windows Update.
I called Intrepid CS, and they said there are issues with USB3 and support is needed by some computers that have USB3 interfaces.
The ValueCAN3 is an automotive diagostic tool, that interfaces to Windows computers via USB2.0.
More info at:
http://www.intrepidcs.com/
fhttp://www.hkaco.com/CAN/intrepid/ValueCAN3.pdf
The ValueCAN3 uses a FTDI serial-to-USB chip to handle communication.
FTDI chips make it easy to add a USB interface to a device.
More info at:
http://www.ftdichip.com/
Other devices, such as USB 2.0 flash drives, work fine.
Are other having problems with USB 2.0 devices on a MacBook Pro 2012?
Is anyone using a device that uses the FTDI chips?
Anyone have ideas to try?
I want to use this Macbook Pro for both Mac OSX and Windows.
I tell people I wanted a high-end Windows Laptop, so I bought a Macbook Pro to run Windows on it.
I have also call Apple for support, but they claim that this is not their problem to solve.

I was told that the Intrepid tools (ValueCAN3 and Intrepid neoVI Fire) that use a FDTI USB to serial interface, would work on Windows 8 on the Macbook. I wanted to avoid Windows 8. I broke down and installed Windows 8 Pro on the Macbook, installing over Windows 7. The two devices now work - but the trackpad does not work. I saw a reccomendation to install trackpad++, along with PPA (Power Plan Assistant), it does not work for my macbook pro 2012.
When will Apple support Windows 8? (an answer that will not be answered here)
The problem is basically Windows 7 does not support USB3, so I installed Windows 8 which does support USB3.
Now with Windows 8 Pro installed, the trackpad does not work.
I also cannot run the Windows Experience Index.
Status Summary:
I can use the USB3 ports under Windows 8 pro.
Intrepid USB2 based interfaces work now.
Trackpad does not work under Windows 8 Pro on the macbook pro (2012) using Bootcamp 4.0.
And Yes, I hate Windows 8 Pro. Windows 7 works, Windows 8 - I just don't get it.

Similar Messages

  • Can Macbook pro 2012 with GT650M support 3d vision via bootcamp

    can Macbook pro 2012 with GT650M support 3dvision via bootcamp
    For sure GT650 is 3d vision supported, but anyone ever made test that you
    can watch 3d movie via windows under bootcamp on new macbook pro
    Thanks..

    After updating NVidia driver newer than 267.76,
    I got black screen after Windows Logo shown during reboot.
    After countless annoying tests,
    I installed the newest NVidia 285.79 driver without problem finally.
    My original prefered display configuration:
    link the primary monitor with HDMI port
    I already followed the GeForce Driver Installation Guide, step by step,
    http://forums.nvidia.com/index.php?showtopic=169555
    but there's still black screen after reboot.
    THEN, I TRIED TO USE mini-DISPLAY PORT INSTEAD AND REBOOT AGAIN,
    video signal was connected to my DELL 2707W(only DVI port)
    by MiniDP to HDMI adapter/HDMI-DVI cable.
    The display is NORMAL NOW !!
    Root Cause assumption:
    Maybe the driver newer than 267.76 always regard miniDP as primary signal output port,
    even if you set the HDMI port as primary.
    I think this is a serious bug, but no solution after mote than 30 driver updating.
    The following configuration worked on my Mac mini 2010 system:
    mini─miniDP to HDMI adapter─
    HDMI cable to HDMI splitter─┬HDMI-DVI cable─Dell 2707
                                                  └HDMI cable─ 3D projector
    but I found that the configuration can't play 3D video...
    So I changed the configuration to:
    Mac─miniDP to HDMI adapter─HDMI-DVI cable─Dell 2707
          └HDMI cable─ 3D projector 
    For your reference.   

  • HT204032 why not support the MacBook Pro ?

    why not the power nap support the MacBook Pro (without retina display) ?

    thanks for answer
    it really solve my question

  • Samsung SSD 840 EVO not detected in MacBook Pro 2012.

    Hello,
    In January I had a problem with my computer where it would overheat, the battery would die quickly, and the overall computer speed was slower than a turtle for even the most basic functions. I brought my computer to a MacMan retailer and they fixed the issue. I then got my MBP back and it worked fine for about a month. It then repeated the same symptoms it had before I got it fixed. I talked to my roommate and did some research and ended up purchasing the Samsung SSD 840 EVO 250gb to replace my Hard Drive.
    I transferred all my data to the new SSD and then installed the SSD to the internal bay where the hard drive sits without any problems. After the SSD was in place I booted up the computer and I got a "flashing folder with question mark." The SSD was not internally recognized by my computer. I then tried to put my Hard Drive back in to see if it would be recognized and it was not. However, both the SSD and Hard Drive are externally recognized via USB enclosure. I have been working on this for a couple days and am getting frustrated.
    I have tried a number of fixes I thought would surely work. I reformatted the SSD to the appropriate Mac format that every forum and website recommend: Mac OS Extended (Journaled) and that does not work. I have reinstalled OS X Yosemite, I have tried updating the SSD Firmware through USB. Nothing has worked yet. I have tried using Apple's internet recovery system and neither drive is recognized when inside the computer. My best assumption but least favorable is the Cable within the MacBook Pro that connects to the Hard Drive/SSD is faulty. I fear that it may be faulty since now neither the SSD or Hard Drive is detected when they are installed in the MacBook Pro, only when external.
    Can anyone please help me figure out what could be wrong? If you need more information just ask and I will do my best to answer them to your satisfaction. Anyone input, conclusion, or direction would be greatly appreciated!
    Thank You for your time and knowledge!

    You have already defined the probable cause, the internal SATA cable.  For verification, take the MBP to an Apple store genius bar for a FREE evaluation.  It is not an expensive repair, even if done by Apple.
    Ciao.

  • Burning- "Device Not supported..." Using LaCie & Toast 7

    HEy all,
    I am getting the message, "Device Not Supported...." with option to cancel when trying to burn to a LaCie. I'm on a FPimac with DVD Stud 3. I have Toast 7 but trying to burn directly from Pro.
    Any work arounds...
    THanks,
    Al

    A snag as I only have Toast Lite - a stripped down version ...and will only let me burn two items or folders ....
    There was only 1 Lay file.
    It won't let me choose the option you mentioned UPG?
    But it did let me choose "DVD-Video" however I got an error after pressing burn - "error -39"
    Other than upgrading my Toast Lite to Toast can't I use my Full Toast Version on my MBpro to burn a DVD authored in DVDPro via my network?
    THanks,
    Al
    Message was edited by: UCanCallMeAl

  • Device type does not support page format

    Hi All,
    There is one issue when I print a sapscript. I get an error message as follows:
    Device type EPESCP9 does not support page format ZSG02
    Could someone advise?
    Thanks
    Alice

    Hi,
      The page format ZSG02 is not present in Device type EPESCP9.
    in SPAD t.code add the page format in that device type.
    Better inform to BASIS people they will add page format in that device type.
    Refer the link Device type does not support page format
    Regards,
    Dhina..

  • The Group Policy Client service failed the sign-in The universal unique identifier (UUID) type is not supported

    Hi guys,
    we created a custom WIM Image (Windows 8 Enterprise) with MDT 2012.
    Sysprept the Image, Deployed via SCCM 2012 SP1.
    Computers are Domainjoined. Error with standard Domain User.
    On some computers (not every computer) and not with every user on the first logon following error message arises:
    The Group Policy Client service failed the sign-in The universal unique identifier (UUID) type is not supported
    It works, when you log in a second time but this error isn't very nice. 
    Is there a solution for that?
    Kind Regards
    Martin

    Hi,
    The service is responsible for applying settings configured by administrators for the computer and users through the Group Policy component. This issue can be caused by various reasons based on the computer environment.
    Can you find any information in event log about this issue?
    Here is the related blog in which the steps can solve most of such issues if the issue continuously happen.
    http://blogs.msdn.com/b/moiqubal/archive/2012/03/04/how-to-fix-quot-the-group-policy-client-service-failed-the-logon-access-denied-quot-error.aspx
    Also, you can refer to the similar thread about this issue:
    http://social.technet.microsoft.com/Forums/en-US/4a644219-50ee-494d-b965-e64a8555109e/the-group-policy-client-service-failed-the-signin-the-universal-unique-identifier-uuid-type-is
    Since this issue can be related to SCCM, to better help you, please submit a new thread for further help:
    https://social.technet.microsoft.com/Forums/en-US/home?category=systemcenter2012configurationmanager
    Hope these could be helpful.
    Kate Li
    TechNet Community Support

  • I have tried to view videos created in premiere elements 10 and I get the following message: "this file type is not supported, or the required codec is  not installed.  When it opens there is a red screen in the monitor panel with Korean writing which als

    I have tried to view videos created in premiere elements 10 and I get the following message: "this file type is not supported, or the required codec is  not installed.  When it opens there is a red screen in the monitor panel with Korean writing which also appears in the place of each clip in the video.  I tried uninstalling and reinstalling premiere elements 10, but that did not have any effect on the video.  Do you have any suggestions?  I researched codec, but do not understand them at all.

    gloucester
    In case you did not find it, the following is a copy/paste of the Announcement on Premiere Elements 19/NVIDIA GeForce
    that appears at the top of this forum.
    Premiere Elements 10 NVIDIA Video Card Driver Roll Back
    If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are experiencing
    Premiere Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting needs to be rolling
    back the video card driver version instead of assuring that it is up to date.
    Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow
    glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this applies
    to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary to get rid of
    the problems. The typical driver roll back has gone back as far as March – July 2013 in order to get a working Premiere
    Elements 10. Neither NVIDIA nor Adobe has taken any corrective action in this regard to date, and none is expected moving forward.
    Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
    http://forums.adobe.com/thread/1317675
    Older NVIDIA GeForce drivers can be found
    http://www.nvidia.com/Download/Find.aspx?lang=en-us
    A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driver roll back can be found
    http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
    ATR

  • Power view couldn't load the model or data source because the data source type is not supported

    Hi,
    I have SQL 2012 standard edition in my local. I have developed SSAS & deployed in local. I have been asked to develop power view report in excel 2013 using this SSAS. But when I tried to do in Excel 2013 professional Plus, I am getting below error:
    Power view couldn't load the model or data source because the data source type is not supported.
    Does power view is supported in standard edition of SQL or it requires Business/Enterprise edition of SQL server?
    Thanks in advance

    What type of SSAS install are you using?
    PowerView in Excel 2013 currently only supports Tabular data sources.
    Only PowerView in Sharepoint 2013 supports both Tabular and Multi-Dim data sources. (provided you have the required Sharepoint and SQL updates installed)
    http://darren.gosbell.com - please mark correct answers

  • Error 7 (windows error 126). Have tried to re-install itunes but failed, twice. some end message about "mobile device not supported".

    Error 7 (Windows error 126). I have tried to re-install itunes twice now, and each time  " mobile device not supported" appears and the  installation can not finish.

    See Troubleshooting issues with iTunes for Windows updates.
    Do you have any iOS devices? If the link above doesn't completely fix your library I could talk you through installing iTunes without Apple Moble Device Support for now which would at least enable you to open iTunes.
    tt2

  • JDBC-ODBC Bridge to SPSS data files - Result Set Type is not supported

    Hello,
    As mentioned in the subject I am trying to read SPSS data files using the SPSS 32-Bit data driver, ODBC and the JDBC-ODBC Bridge.
    Using this SPSS Driver I manged to read the data directly into an MS-SQL Server using:
    SELECT [...] FROM
    OPENROWSET(''MSDASQL.1'',''DRIVER={SPSS 32-BIT Data Driver (*.sav)};DBQ=' SomePathWhereTheFilesAre';SERVER=NotTheServer'', ''SELECT 'SomeSPSSColumn' FROM "'SomeSPSSFileNameWithoutExt'"'') AS a
    This works fine!
    Using Access and an ODBC System DNS works for IMPORTING but NOT for LINKING.
    It is even possible to read the data using the very slow SPSS API.
    However, when it comes to JDBC-ODBC the below code does only work in part. The driver is loaded successfully, but when it comes to transferring data into the resultset object the error
    SQLState: null
    Result Set Type is not supported
    Vendor: 0
    occurs.
    The official answer from SPSS is to use .Net or to use their implementation with Python in their new version 14.0. But this is obviously not an option when you want to use only Java.
    Does anybody have experience with SPSS and JDBC-ODBC??? I have tried the possible ResultSet Types, which I took from:
    http://publib.boulder.ibm.com/infocenter/db2luw/v8/index.jsp?topic=/com.ibm.db2.udb.doc/ad/rjvdsprp.htm
    and none of them worked.
    Thank you in advance for your ideas and input & stay happy!
    Here the code without all the rest of the class arround it:
    // Module:  SimpleSelect.java
    // Description: Test program for ODBC API interface.  This java application
    // will connect to a JDBC driver, issue a select statement
    // and display all result columns and rows
    // Product: JDBC to ODBC Bridge
    // Author:  Karl Moss
    // Date:  February, 1996
    // Copyright: 1990-1996 INTERSOLV, Inc.
    // This software contains confidential and proprietary
    // information of INTERSOLV, Inc.
    public static void main1() {
      String url   = "jdbc:odbc:SomeSystemDNS";
      String query = "SELECT SomeSPSSColumn FROM 'SomeSPSSFileName'";
      try {
        // Load the jdbc-odbc bridge driver
        Class.forName ("sun.jdbc.odbc.JdbcOdbcDriver");
        DriverManager.setLogStream(System.out);
        // Attempt to connect to a driver.  Each one
        // of the registered drivers will be loaded until
        // one is found that can process this URL
        Connection con = DriverManager.getConnection (url);
        // If we were unable to connect, an exception
        // would have been thrown.  So, if we get here,
        // we are successfully connected to the URL
        // Check for, and display and warnings generated
        // by the connect.
        checkForWarning (con.getWarnings ());
        // Get the DatabaseMetaData object and display
        // some information about the connection
        DatabaseMetaData dma = con.getMetaData ();
        System.out.println("\nConnected to " + dma.getURL());
        System.out.println("Driver       " +
          dma.getDriverName());
        System.out.println("Version      " +
          dma.getDriverVersion());
        System.out.println("");
        // Create a Statement object so we can submit
        // SQL statements to the driver
        Statement stmt = con.createStatement(ResultSet.TYPE_FORWARD_ONLY ,ResultSet.CONCUR_READ_ONLY);
        // Submit a query, creating a ResultSet object
        ResultSet rs = stmt.executeQuery (query);
        // Display all columns and rows from the result set
        dispResultSet (rs);
        // Close the result set
        rs.close();
        // Close the statement
        stmt.close();
        // Close the connection
        con.close();
      }

    Thank you for your reply StuDerby!
    Actually the above script was before, as you suggested, leaving the ResultSetTeype default. This did not work...
    I am getting gray hair with SPSS - in terms of connectivity and "integratebility" none of their solutions offered is sufficient from my point of view.
    Variable definitions can only be read by the slow API, data can only be read by Python or Microsoft Products... and if you want to combine both you are in big trouble. I can only assume that this is a company strategy to sell their Dimensions Platform to companies versus having companies developping their applications according to business needs.
    Thanks again for any furthur suggestions and I hope, that some SPSS Developper will see this post!
    Cheers!!

  • How can I get my stereo to play music videos from my Ipod Nano?  It comes up with the message "This device not supported".  Strangely my Iphone IS recognised.  The stereo, Ipod, and Iphone are less than 4 months old. Any suggestions welcome!

    How do I get my Ipod to play music videos through my theatre system?  I keep getting the message "This device not supported".  My theatre system WILL recognise my Iphone however.  The theatre system, Ipod, and Iphone are all less than 4 months old.  Any suggestions welcome!

    Check with the theater system vendor and see if their system is compatible with the Nano. The resolution on the Nano may be too low for the system.

  • Oracle Version 10.1.0: Data type is not supported

    Hi,
    I am getting "Data Type is not supported" whenever I try to access tables with lob column in Toad.
    Oracle server version is 10.1.0 and using toad version 7.6. Sql net version 9.2.0
    Any pointers towards the resolution?
    Thanks in advance.
    Bhavesh

    You could take this opportunity to upgrade your Toad to version 10 of sqlplus.
    Failing that there are mail lists for those less productive souls struggling with the amphibious software at which can be found at.
    http://www.toadsoft.com/maillist.htm

  • My iPhone 4 Bluetooth, using ios7, cannot identify any other bluetooth device (even other apple products). Says device not supported. How to solve this problem?

    My iPhone 4 Bluetooth, using ios7, cannot identify any other bluetooth device (even other apple products). Says device not supported. How to solve this problem?

    Supported Bluetooth Profiles
    It is not supposed to detect other Apple products via Bluetooth.

  • Firefox error: video format or MME type is not supported

    Client said that video cannot load on firefox except other browsers.
    It shows "Video format or MIME type is not supported".
    Firefox version is 33.0.3. Video is mp4 format.

    P.S. In case it helps, here are some mp4 video tests you can try (from mozillaZine's [http://kb.mozillazine.org/Testing_plugins#Other_media_tests Testing plugins] article) to see if they work for you in Firefox 33. (They both work fine for me on Windows 7 without needing a plugin.)
    *http://www.html5videoplayer.net/html5video/mp4-h-264-video-test/
    *http://techslides.com/demos/sample-videos/small.mp4

Maybe you are looking for